I have 2002 A4 1.8 Turbo. Headlight replacement looks almost similar and they have 4 screws (2 Top + 2 with a plate which holds the headlight) I want to replace the HID with Halogen. I've opened headlight once and looked into it, but I'm not sure what needs to be replaced. Repair shops are charging almost $75-$80 just for opening the headlight and installation and don't want to go with those. Any instructions would be appreciated.
Sorry, but this is overly simplified. It's good of you to share a video showing people how to cut-out Halfords, but you could dazzle people (Especially with new , brighter replacments! ) and/or fail your MOT if you throw-off your headlight alignment when doing this job - which is very easily done when changing bulbs on these A4's. You're responsible by law to have this correct. You have to check and set-up your alignment, if necessary, after you've removed and replaced your lamps. The mass majority of MOT centres will make-a-meal-out-of-this and act like it's the end of the world and make-out that it's a huge job to fix. Don't let the f@£kers get away with that! It's a simple job to align your headlights if they haven't been wrecked by a previous bodger, and you have a good place to do the job. A flat, level, 25+ feet/8ish metres long road with a vertical wall is what you need to find. It also helps a lot to be dark, and have a tape measure, some tape and the tools needed to looses and tighten your headlights and adjusters. If you have self levelers (most of these do) the motors need to be working, too. If you have noise like a trapped budgie in there then that's the leveling motor failing! Search for headlight alignment on RUclips and you'll find loads of how-to's about this subject. Safe driving, everyone!
this what i was afraid of. one of my sunlight bulb is out so for changing it i was hoping that i wont have to take apart the whole thing.. i guess nothing is easy for 2004 a4 tdi. at least now i know how to do it so, thanks.
This is the best video on this thus far. 👍🏼👍🏼👍🏼
One of the headlight top bolts is broken (just turning without coming out). Any suggestions how to get it out?
I have 2002 A4 1.8 Turbo. Headlight replacement looks almost similar and they have 4 screws (2 Top + 2 with a plate which holds the headlight)
I want to replace the HID with Halogen. I've opened headlight once and looked into it, but I'm not sure what needs to be replaced. Repair shops are charging almost $75-$80 just for opening the headlight and installation and don't want to go with those.
Any instructions would be appreciated.
Hi, did you manage? I also am going to go back to halogen
Thank you so very kindly for taking the time to make this video! Cheers Mate
The Phillips ones are PH2. PH3 is huge, and rarely used.
Can anyone know what type light I need? I have an ugly orange and I want white or ccol blue lights :) Audi A4 Cabrio 2.5 TDI Bfc
@Dev JB Thank You!
Right way to remove the head light in other post they recomended remove the all bumper this the best only way eassy way .....
Sorry, but this is overly simplified. It's good of you to share a video showing people how to cut-out Halfords, but you could dazzle people (Especially with new , brighter replacments! ) and/or fail your MOT if you throw-off your headlight alignment when doing this job - which is very easily done when changing bulbs on these A4's. You're responsible by law to have this correct. You have to check and set-up your alignment, if necessary, after you've removed and replaced your lamps. The mass majority of MOT centres will make-a-meal-out-of-this and act like it's the end of the world and make-out that it's a huge job to fix. Don't let the f@£kers get away with that! It's a simple job to align your headlights if they haven't been wrecked by a previous bodger, and you have a good place to do the job. A flat, level, 25+ feet/8ish metres long road with a vertical wall is what you need to find. It also helps a lot to be dark, and have a tape measure, some tape and the tools needed to looses and tighten your headlights and adjusters. If you have self levelers (most of these do) the motors need to be working, too. If you have noise like a trapped budgie in there then that's the leveling motor failing! Search for headlight alignment on RUclips and you'll find loads of how-to's about this subject. Safe driving, everyone!
great stuff, thank you very much - wonderfully clear and reassuring
Thanks for the tutorial...Cheers
No problem 👍
do you actually remove the bottom bolts or just loosen them off
The ones you look at straight down you loosen off
@@CarAndMechanical thanks ,good video
Thank you very much 👍👍
Excellent video. Well spoken and yada 😜🤙🇦🇺
Does your Audi have xenon bulbs or halogen? Because i saw D1S mark.
+Audi Awd they are Halogens
How do you know if you have xenon? Unless you open it? I have high voltage sticker on the back of the headlight.
+Audi Awd xenon/HID bulbs are a different shape and have ballasts.
If you can get 1 out without getting the headlights out it'll quickly show.
Thanks mate , very useful
this what i was afraid of. one of my sunlight bulb is out so for changing it i was hoping that i wont have to take apart the whole thing.. i guess nothing is easy for 2004 a4 tdi. at least now i know how to do it so, thanks.
I have changed once the light bulbs on A4 B6. The weird fact was that the side light bulb was not t10. It was like t11, but a bit different.
Very informative
Excellent, thankyou.
Much love.
Thanks for video.
thanks