Tutorial How to make a floating wine bottle Holder from wood

Tutorial How to make a floating wine bottle Holder from wood will show you the details in How to make a floating wine bottle Holder from wood I hope after watch my video you can make a floating wine bottle Holder from wood.
#wine, #redwine,
#wine tasting,
#white wine,
#wine beer whiskey little big town,
#wine slow,

[@PeterGonzalezAyres1932]

I am from Australia and we have wonderful wines here! Your idea to hold the bottles of wine is fantastic! Congratulations and thanks!

[@woodcreationwithMudita]

Thanks for your visit and comment greeting from Bali island

[@fontybits]

As can be seen at 7.45, the THINNER the wood, the less stable it is.
I made 5 today, but with different specs. They are ROCK-SOLID!
Length = 300 mm; Width = 90 mm; Thickness = 45 mm.
Cut both ends at same 33° angle.
Drill 40 mm hole - 190 mm from bottom.
Perfect!

[@woodcreationwithMudita]

Thank you for your sharing 🙏

[@igustikade]

The process of making holding a wine bottle is quite good, Mr. Mudita is an expert at making handicraft materials from wood

[@woodcreationwithMudita]

Thank you

[@mikebirnie6381]

Awesome job...so simple and the world is wide open regarding woods and live edge...thankyou

[@woodcreationwithMudita]

Thank you very much

[@putusuwanta6126]

Mantaaappp pakkkk

[@woodcreationwithMudita]

Matur suksma

[@bayuedi8196]

Mantap bli 🤩

[@woodcreationwithMudita]

Suksma

[@febycahyana8729]

Sukses selalu

[@woodcreationwithMudita]

Suksma feby

[@agusdarma3616]

Wooow 🤩

[@woodcreationwithMudita]

Thank you agus for your visit

[@andragaming188]

Mantapp👍👍

[@woodcreationwithMudita]

Thanks agus for your support

[@ekanurie9821]

Wow very educative channel, looking forward to see another video😊, success always, bravo👍

[@woodcreationwithMudita]

Thanks eka for visiting my Chanel

[@BerbagiImu]

Keren sukses selalu bosku

[@woodcreationwithMudita]

Terimakasih support nya

[@komanghariawan5424]

Sukses pak 👍🙏

[@woodcreationwithMudita]

Makasi pak mang

[@marthateresanapitupulu9795]

out of the box, keep it up Pak :)

[@woodcreationwithMudita]

Thanks Martha for visiting my chanel

[@georgebrill3072]

Nice Job.

[@woodcreationwithMudita]

Dear Geroge Brill
Thanks for your visit to my chanel,
Please consider to subscribe to support my chanel and to get a nother new video related to woodworking
Warmest regards
Wood creation

[@bulento9398]

Good job thnx.

[@woodcreationwithMudita]

Thank you for visiting my chanel
If you think it's helpful please consider to subscribe thanks

[@coffeetaulan1968]

❤❤❤❤❤

[@suarsaputra1737]

Jhosss

[@woodcreationwithMudita]

Thank suarsa

[@TheDude1776]

You said 6 inches long pieces but the ones in the video are 11.5 inches long. And the holes were not marked at 2 down 4 up.

[@woodcreationwithMudita]

Dear Chris L
Thank you for taking the time visiting my chanel and give your feedback and correction, the total length of the wine bottle holder is 32 cm, sorry for the missed description about the inch due to I mostly use the cm in measurement,
Once again thank you for your corrections

[@TheDude1776]

@@woodcreationwithMudita Thank you for taking the time to make the video. In America we do use the inch for measuring but we also use the cm. So if you wanted to make another project video, you can give the measurements in cm to make it easier.

[@woodcreationwithMudita]

Thank you so much for your support as usual

[@qerqebabderrahmane7046]

رائع 🇲🇦

[@woodcreationwithMudita]

Thank you for visiting my chanel
Please consider to subscribe to ensure you get notification for the next new tutorial

[@qerqebabderrahmane7046]

@@woodcreationwithMudita great honor bro 🇲🇦 ok 👍

[@woodcreationwithMudita]

Thank you very much brother, I am sure we have some hobby and I wish one day could collaborate to make something 😊

[@danalaniz7314]

Nice demonstration. Thanks for stating that the bevel needs to be 33 degrees. I've always seen it at 45 but I want to try at 33.

[@woodcreationwithMudita]

Dear Nice Alaniz, thank you for visiting my chanel and comment, if you think it's helpful please consider to subscribe to ensure you get notification on my next project and tips 🙏

[@finnmaccool3385]

There are 4 primary things that affect balance point - angle at base, length of wine holder, dimensions of timber and type of timber used (density of timber) eg pallet wood is not the same measurements as say purpleheart). The 33 deg base angle tends to shorten the overall length of the holder (compared with the more 'standard' 45 deg) but the position of the hole will vary depending on the timber. Here's an example / guide - Hard Maple at 33 deg, 8" x 4" x 3/4 stock, hole center at 5.3" from front of base; pallet wood same angle and dimensions, hole center 6.1" from front of base. I have seen some people swear that you need to drill the angle of the hole parallel to the angle of the base but personally I drill them perpendicular to the base and just tilt the bottle..

[@woodcreationwithMudita]

Dear Finn MacCool
First of all thank you for your visit in to my chanel, also big thanks for all you feed back and sharing about the making balancing wine holder, and will try to make with other type of timber,

[@miraoktasari3689]

Sukses selalu

[@woodcreationwithMudita]

Makasi mira