1/10 scale RC : TOYOTA TACOMA TRD PRO(3D printed Body) Offroad Test Driving.
HTML-код
- Опубликовано: 28 сен 2024
- Camera : iphone13 Pro / 4K/60fps, Edited Half speed Slow motion)
Gimbal : zhiyun Crane M2S 3-axis stabilization gimbal
===========================================================================
3D file : cults3d.com/en...
A few things to keep in mind
1. The front fender and bumper parts must be processed to be assembled.
2. There is no headlight transparent parts modeling.
3. There is no Windows design (individuals must make their own).
===========================================================================
3D printer
Creality Ender 5 Plus (fdm): PLA+(material)
Creality HALOT ONE PLUS (resin): Standard resin
===========================================================================
Chassis : GMADE GS02F + GS01(Axle)
There is no particular reason for choosing this chassis and axle.
I just assembled it with leftover parts and ended up with this combination.
===========================================================================
Tires : MN86 stock OD 82mm tires
Wheels : Aliexpress 1.9" cheap wheels.
Nice suspension setup
Thanks for watching my video 🙂
These Videos never fail to fascinate me! Awesome job
Thank you very much! My friend XD
Have a nice day!
mn86 타이어가 잘 어울리네요:)
바디컬러~
주행성모두 인상적입니다👍
3디 프린트 만들어서 팔아도 되겠네요 ㅋㅋ
완전 수준급입니다~
ㅎㅎㅎ 감사합니다~^^
제가 만드는 속도로는 손해보고 팔아야 될 것 같네요~ㅋㅋㅋ
바디 작업하시는거 영상으로 찍어주실수 없나요? 너무 멋진데요
감사합니다~^^
다음에 다른 바디 제작 기회가 된다면 시도는 해보겠는데...제작기 영상이 편집하기도 힘들고 시간도 많이 걸려서 현실적으로 많이 힘듭니다ㅠ
Perfect! Any info on where to source the 3D file?
Thanks for watching my video 🙂
Please see the description for information.
와 탐나는 바디네요. 너무 멋집니다.😍💕🎶👍
감사합니다~^^
영상에서는 티가 많이 감춰지네요~ㅎㅎㅎ 실물은 많이 미흡합니다~^^
3d프린터 바디인데 엄청 깔끔하게 도색이 잘되었네요! 고생 많이 하셨겠네요!🤩🤩🤩
감사합니다~^^
화면상에서는 티가 거의 안나는데...실제로 보면 많이 허술합니다~ㅎㅎㅎ
If u where to sell it how much ?
오~~ 드디어 첫 주행하셨군요 형님! 움직임도 좋은데요? 역시 밝은 색상이 이쁘네요 앞으로의 주행이 기대됩니다! 즐거운 크리스마스되세요! 형님!
감사합니다~^^
실제 색상은 좀 칙칙한 느낌인데 화면상에서는 괜찮게 보이네요~ㅎㅎㅎ
올해 잘 마무리하시고요~~~^^
3D 프린터로 만든 2호차량이네요!~ 바디표면과 색상이 너무좋습니다!~ 만들고 칠하고조립하신다고 고생 많았겠습니다!~ ^^
감사합니다~^^
역시 사포질 지옥이었습니다~ㅎㅎㅎ 글래디 차체가 오면 거기에 올려봐야겠습니다~^^
Very good shooting, what camera did you use, brother?
Thanks for watching my video 🙂
Please see the description for information
Were do you get the Light bucket set?
Sweet.
바디 너무 이쁜듯합니다 👍🏼👍🏼👍🏼
감사합니다~^^
정말 지겨운 사포질끝에...간신히 또 하나 만들었습니다~ㅎㅎㅎ
Hi , i have a question related to this build . Why do you use two different materials, it cannot be done using only FDM ? Thanks in advance i’m thinking to do my own rc car same as you 🎉
Beautiful setup so real looking and response. Great video. Very jealous:)
That looks amazing! I WANT ONE! I just did a diecast 1/27 Tacoma and I love it.
Thank you very much! My friend XD
Have a nice day!
Absolutely gorgeous Truck my friend. Great run and awesome terrain
Thank you very much! My friend XD
Have a nice day!
멋진바디 네요 😊
감사합니다~^^
지옥의 사포질끝에 간신히 만들었습니다~ㅎㅎㅎ
와 정말 스케일감 최고입니다
이렇게 만들려면 abs로 출력해야 하나요?
좋게 봐 주셔서 감사합니다.
저는 여건상 PLA+로 출력했는데...챔버가 갖춰진 프린터라면 ABS로 출력하는 것이 훨씬 좋다고 생각합니다.
PLA계열은 ABS에 비해 열에 약해서 한여름 차안에 방치하거나 직사광 아래에서 오랜시간 주행하면 바로 물렁물렁 해지고 변형이 옵니다~ㅠ
Great footage and nice work! 👍🏼
What frame used for this project? There is no info about components in a description.
Thanks for watching my video 🙂
Please see the description for information.
터프한 타코마군요❤
감사합니다~^^
보여줄게 별로 없어서 그냥 달렸습니다~ㅎㅎㅎ
Incredible work on the body!
Thanks for watching my video :-)
Have a nice day!
오~~바디 이쁘네요 영상도 멋지고 ~~😊😊😊
정민님 잘 지내시죠?^^
뭔가 새로운 것을 찾다보니 요즘은 3D바디 제작에 관심이 조금 가네요~ㅎㅎㅎ
Nice work, the body looks great
Thanks for watching my video :-)
Have a nice day!
i love your video so much , i wish i can afford one of this off road rc :(
Thanks for watching my video :-)
Have a nice day!
Good driving! Amazing 3D model
Thanks for watching my video :-)
Have a nice day!
very nice shots and model
Thanks for watching my video 🙂
on which page do you buy?
Thanks for watching my video 🙂
Please see the description for information.
Awesome, Video. Liky
Thanks for watching my video :-)
Have a nice day!
👍💪🛻
Thanks for watching my video 🙂