Nicely done, good job. I wouldn't have been able to pass up those deals either. And I learned your gas inlet hose clamp trick. Good call! Those things always crack.
Glad to see your still alive!! You may not recognize me but I raced with you when Sharon Speedway had the Circle Track Show Down many years ago! I raced the the red Polaris 340. Hope all has been well!!
Fn awesome man ,missed ya . And you come back with one of my all time favorite sleds, just finished a 98 xc 700 , ves swapped with perc and everything, 144x1.5 track fun project. Carry on 👌
Nice, sounds like a sweet setup. 👍 What suspension you go with? Not sure if you caught it in the vid, but there's a '98 XC 700 project coming up at some point, haha.
I cant even...buddy your videos have always been the best...you make me laugh my ass off and then your ingenuity always amazes me. Your budget is always the least amount you can spend and thats a major part of the success of your videos i feel...dont ever stop making videos. Maybe one day we can rip sleds together here in MN...take care
We used to race there back in the earlier 2000s , great place ! Brings back memories hope to build a sled and get back into it someday soon Thanks for the great content !
When my 98 waterpump died I adapted the newer ones to fit, added a length of hose to the main one with a metal coupler drilled and tapped the coupler for that brass elbow had a head with the coolant bypass so used that, also there's a ridge on the bottom of the newer pumps that needs to be ground down to clearance for the engine plate.
70 years old and we have a small sled shop in Washington State. Then fellers should have taken me away some 30 years ago. But it's all perception. Maybe they did.. Your vijayos rank right up there with the best. Few and far betweenst but well thought out.. . This Millers for you
It would be Awesome to get a AMR300, or amr500, supercharger for one of these engines, and put. on a pair 34mm carburetors, or a Single 60-68mm carb. With about 7-9 psi , possibly a 5-6 speed gearbox. An expansion chamber exhaust. Squeeze it into a ninja 250 frame! Or Drz 450 super moto! That should be 'SOMETHING ELSE, IF BUILT PROPERLY" MAYBE Run it on methanol 'occasionally' and when needed, run it on nitro, 50% with 48.5% methanol, and 1.5% mineral oil similar to the two stroke hobby motors. That produce something crazy like 600 HP per liter !?!?? (They spin something like 60,k rpm to do it, on nitro . So 150-180 HP from 600 cc should be possible right? Dreams I know.. happy holidays! 🎉
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
HES ALIVE!!
What a treat! Thanks again for helpin gettin my brand "used" artic dump car runnin bud!
No problem, anytime! 🍺
Dude... been missing this content 🎉🎉🎉
It's always a good day when you upload!
Appreciate that. 👍
Error Dynamics!!!...I love it...-John
So good to see you, I do enjoy your humor!!
Thanks man!
That things got some balls now buddy 🤘🏼
Cool, an early xmas present from the best channel on youtube
Haha, thanks man!! Wish i had more time for more vids!
Good to see you back and you gotta love an old Polaris wedge!
Yup, the wedge is an all time classic. 👍
So glad to see you're still kicking great job on the ole girl ! JeffinMaine
Thanks man 🍺
Nicely done, good job. I wouldn't have been able to pass up those deals either. And I learned your gas inlet hose clamp trick. Good call! Those things always crack.
Thanks man, gotta get the deals when ya can.
Great video. Always look forward to content from the BEST RUclips channel out there!
Been waiting for dude to upload !!! An here it is a barn fresh sled vid
Awesome! Congrats on gettin a new shop.
Don't get too excited, it's nothing extravagant, haha
Good to see ya my commonwealth brother
👍
Glad to see your still alive!! You may not recognize me but I raced with you when Sharon Speedway had the Circle Track Show Down many years ago! I raced the the red Polaris 340. Hope all has been well!!
Haha, thanks man! That was good time at that race, think I have a picture from in the pits with your sled in it. 👍
@toocheaptosmoke that's would be cool if i can get a copy of them.
@@TheLostWrenchGarage Will see if I can find it 🍺
@@toocheaptosmoke sweet!
Fn awesome man ,missed ya . And you come back with one of my all time favorite sleds, just finished a 98 xc 700 , ves swapped with perc and everything, 144x1.5 track fun project. Carry on 👌
Nice, sounds like a sweet setup. 👍 What suspension you go with? Not sure if you caught it in the vid, but there's a '98 XC 700 project coming up at some point, haha.
@@toocheaptosmokeheck yea!
@@toocheaptosmoke I extended an edge 121 to 144 , I caught that 700 you had on the trailer ,can't wait to see more.
I cant even...buddy your videos have always been the best...you make me laugh my ass off and then your ingenuity always amazes me. Your budget is always the least amount you can spend and thats a major part of the success of your videos i feel...dont ever stop making videos. Maybe one day we can rip sleds together here in MN...take care
Thanks man! I'll try to keep on making videos for as long as people keep watching them, haha. Hope to get up there and ride in MN some day.
yeah man good stuff as always
HOLY SH*T!! He's alive!!😂
Thanks for sharing!
Thanks for watching!
YEHAW IT'S THAT TIME AGAIN~ BARN FRESH~
Hell yeah, thanks man!!!
@@toocheaptosmoke HAVE A GOOD 2025MANGZZZZ
@OfficialHankIII Thanks man, you too!!! 🤘
@@toocheaptosmoke WOOOOOOOO~ ruclips.net/video/WLq78sIP6MU/видео.html
@OfficialHankIII Hahaha, hell yeah!! That's how it feels when something starts after 2 months without charging the battery!
We used to race there back in the earlier 2000s , great place ! Brings back memories hope to build a sled and get back into it someday soon
Thanks for the great content !
Nice, that's cool to hear! They had a bunch of old photos from seasons past on display at the clubhouse, cool to see the history. 👍
hell yeah brother
The war zone 👍 Ridge runners is super close to me, haven't been there yet though.
love your video's please keep them coming
When my 98 waterpump died I adapted the newer ones to fit, added a length of hose to the main one with a metal coupler drilled and tapped the coupler for that brass elbow had a head with the coolant bypass so used that, also there's a ridge on the bottom of the newer pumps that needs to be ground down to clearance for the engine plate.
Heat the case, and freeze the other piece. Should go in minty.
Good ole two strokes and klotz
Damn bro I thought you quit this shit I've been missing your videos I always look forward to seeing what your next project is
Not yet!! I look forward to it also, don't know what the next project will be half the time, haha
👌👌💪
Well adhd kicked in, and I'm digging my out sled out of the brush as i listen to your video 😆 🤣.
Mission accomplished! haha
My guy!!! Sweet. Been waiting for this!
Mint 👌
Well spoil me rotten
We just can't wait to get some snow here in snow shoe Pennsylvania i wanna ride
We need some old school winters!
Welcome back man, been too long.
Thanks man. 👍
Can’t go wrong with a crusty old xc!
Heck ya man! Watched a bunch of your vids during the build, haha 👍
Way to stick to it n figure shit out
It's no fun if everything just falls together, haha
i got a 91 phazer off a friend and it's just been a parts nightmare...
So it was just a rumor. The white coats didn't come and get ya.
You mean I don't have to be hiding from them??
70 years old and we have a small sled shop in Washington State. Then fellers should have taken me away some 30 years ago. But it's all perception. Maybe they did.. Your vijayos rank right up there with the best. Few and far betweenst but well thought out.. . This Millers for you
@@kevinfoster1213 🍺🍺
It would be Awesome to get a AMR300, or amr500, supercharger for one of these engines, and put. on a pair 34mm carburetors, or a Single 60-68mm carb. With about 7-9 psi , possibly a 5-6 speed gearbox. An expansion chamber exhaust. Squeeze it into a ninja 250 frame! Or Drz 450 super moto! That should be 'SOMETHING ELSE, IF BUILT PROPERLY" MAYBE Run it on methanol 'occasionally' and when needed, run it on nitro, 50% with 48.5% methanol, and 1.5% mineral oil similar to the two stroke hobby motors. That produce something crazy like 600 HP per liter !?!?? (They spin something like 60,k rpm to do it, on nitro . So 150-180 HP from 600 cc should be possible right? Dreams I know.. happy holidays! 🎉
Was that a Massey Ski-Whiz?
Might be... lol
Where you been bro I missed you
Just not enough time in the day, haha
Guerilla machining at its finest. A mere mortal would have been defeated. Glad you showwd some runs!!
A lack of resources and a limited amount of time just forces ya to get creative sometimes, haha