2 Stroke Heat Cycles and Engine Break In (Controversial)
HTML-код
- Опубликовано: 7 сен 2024
- 2 Stroke Heat Cycles and Engine Break In
Here's my .02 on a strangely controversial topic regarding engine break in. I typically do three 15 minute cycles spacing them apart with adequate amounts of time to completely cool the motor. During each heat cycle, I move the throttle to different ranges of RPMs and occasionally rev the engine.
There are other methods and opinions on this topic... this is just the way I do it.
If you enjoyed, please comment, like, share and subscribe!
Thank you for watching!
Support the channel and up your swag with Mike Sabo merchandise! Visit www.teespring.com/stores/michael-sabo
Equipment I use!
Wireless Mic - amzn.to/2VeEATV
Tripod - amzn.to/2T4ZHW7
Tripod Phone Mount - amzn.to/37OzFfh
Phone Gimble - amzn.to/2vWDTnG
GoPro Hero 7 Black - amzn.to/2HQMMSp
Video Editing - amzn.to/39Ug66z
Thumbnail Editing - amzn.to/2HJuanv
My Favorite Energy Drinks... and they're cheap 😎
Reign Energy - amzn.to/2vXv5hk
Strikeforce Energy use Promo Code: SABO20
Companies and Sponsors please contact: michaelsabo350@gmail.com
Add me on Instagram @michaelsabo350
DBC Racing
Website: www.dbcracing.com
Instagram: @dbc_racing
I own the license to use any and all music in this video.
How do you do your engine break in? Thank you for watching my video 🤘🤘🤘
Michael Sabo I do it the same way as you always have. I made my choice when I was 11 and I plan to stick to it.
How ever you want your money your rules . Do what you want man
I do a 3-4 heat cycles from 20 -15 minutes each then the first ride take it easy
Micheal man I’m glad she’s running good to bad you lost her in that bet ...can wait to see it in person
Don't you guys hate scammers for bike and quad
These are one of those dream builds that everyone wishes for once in a life time but hardly only a few get it done due to economy , job, family ,lack of time. But seeing someone else do it step by step with all the heart poured in makes one related to the build and feel proud of the accomplishment in the end. Well done mike !!!
Thank you man; hopefully I have been able to convey some of the excitement with you and my other subscribers so we can all enjoy it 🤘
Well said!
🙏
3-5 heat cycles and easy on the first tank of gas. That’s how I do’em bro.
Sweet racer bud
Mike Kent i go balls to the walls and never a problem
Just drive it no need to do that
@@jamieobrien3387 1 heat cycle, then run'em like you would normally drive it. If its gonna break have it break right away. Haha
I do 2
Damn dude, I’m going to the dunes next weekend. I was actually thinking about inviting you out and showing u around. Your my favorite youtuber so it would have been awesome to meet you
I think your break in procedure is right on. That's pretty much exactly the way I've always done it, and every motor I've done outlasted everything else. In fact, I've never blown a motor that I've built, and I've done dozens. So do what you do brother, especially if its working for you!
Thank you for the feedback Kylon Endres, I appreciated you watching my video!
It's actually the dream to completely rebuild some sort of motocross vehicle for me. Definitely going to once I find the time😭
Take lots of pictures and bag and tag label even the most obvious stuff.... save ya lots of time to.... I love this kinda stuff myself always dreamed of having a shop house there's a RUclips guy Cameron I think has that kinda set up even has a track out back he builds really nice bikes to
@@Codyjames83 Cameron Niemela 🤘🏻
3-15 minute heat cycles and easy first ride has always worked for me when I had 2 strokes
I have been building 2 smokers for over 25 years I do 3 15 to 20 min heat cycles bump the throttle several times through out the run time and then 1 ride at about 45 mins and no full throttle then let them cool off then run them like striped apes !!!! And yes I do let the motor cool down in between each heat cycle !! Love the content brother !!!! You can diff build some SICK 2 SMOKERS
I have heard a shop that builds crazy 100+ hp banshees will break them in doing max dyno runs right away after they are warmed up. They say those motors last and they make the most power
After every rebuild on the first start I bang rev limiter for about 5 min
*sends rod through case* ( insert shocked Pokemon meme)
And it doesn’t blow up?!
Then soak in ice water
Freakin beastin' out content on the daily!! 🤘 Congrats on 40k brother, you deserve it... and 100k more! 👍😁
No way I have been getting shocked for the last 7 years thank you so much lol
lmao!
When we break in aircraft engines we warm them up to operating temperature and then run them hard under load
Thats interesting !! Ive heard alot about breaking in like that
U screwed up big-time!!!!! U shoulda took it into 2vintage's "SHOP" to break her in. Would have at least lasted a whole weekend minus Sunday. Love the build Sabo.
Lmao 😂
Ya so what the kid can use wd40 instead of premix he uses that crap for everything its agravating to watch I'm just waiting for him to buy a 500 that actually runs correctly cuz if his bikes ran correctly he would have definitely wrapped one around a tree by now
She's not gonna be MiNtY..😔 or go up on EvErY gEaR, heartbroken.
@@UlisesGlez26 dude I think it's hilarious everybody knows who that kid is I watches videos just to remind myself of what not to do
@@Peace.In.Reptiles haha, same (wd40 on break pads)
straight on dyno wide open in every gear for all the brand new bikes. The 2 strokes you dont want to over oil for break in or piston rings don’t seat properly.
My dad has a 86 and a 87, on thre 87 I’ve broke in a 310 and a 330 kit on it and I always did 1-3 heat cycles then ran about 2 tanks though them just to be extra safe but that second tank all gears all different rpm ranges just making sure the motor is used every way like it would be in the future
Thank you for the feedback Dakota Mell, I appreciated you watching my video!
God I love 2 strokes but your killing me I cant wait to see it kicking some as* break in yeah there's hundreds of ways and everyone's is the bests do what sounds good to you great video
mickey asbill thank you for watching! 🤘
You are doing the break in the right way man. Only a fool will rip on a freshly built motor. Same goes for car engines. Even super car manufacturers have a break in procedure before anyone even gets the car
That's a great point man!
I myself in crowded places start my quad and look at the exhaust smoke and coolant reserve tank. Makes me look PRO, but honestly I dunno a shit what i am looking for.
LMAO 😂
Wtf lol go ahead and check the master cylinder sight glass to really fuck em up
before you start it stick your finger in the exhaust an smell it to see what kinda fuel/air ratio you are at
Just rebuilt the top end on a 2001 Trailblazer 250 (I know you're jealous, lol). I used a NAMURA top end kit. The instructions say to do at least two heat cycles. They recommend driving it for 30 minutes to an hour, but taking it easy, not giving it full throttle, but if you do, very short spurts. Then let it completely cool down, (x2). I just do what the instructions say. That way if something goes wrong, I know it most likely wasn't me.
Was told by dune land that you can get by with knobbies if you air them down. Planning on going this weekend too. Maybe see you there.
The 350 raptor I rebuilt. I let it idle for about 10 min changing the rpms after that took it out to the trails and rode it for 20 minutes or so taking breaks of about 15 minutes. I did that for about 3 hrs then went home and changed the oil. I never ran it hard and made sure to go up and down in the gears. the next weekend I took it out and kind of did the same thing but rode it a little harder. After riding change the oil again. I have put about 15 hours on the motor and I have changed the oil three times. I’m going to change the oil to 20/50 because it’s hot as hell now. It seems to be running good so far.
I would love to break some new trails through the trees on that thing. paddled up at Winchester bay.you did a stellar job on this thing.also, how you were transparent wiith all the details, showed the little fabs you had to do to make it come together, your nod to Arlen and were wide open for criticism and hater nonsense 😂 much respect, homie.I very much enjoyed this.Keep 'em coming.Oregon quad, dune and dirt lover, James Long 🤘
I was always very concerned that I would not give the engine enough break in time so I would mix up a tank of belray H1R at 32:1 and run the entire tank through at idle using the heat cycle method which took forever. However I took a brand new crank bearings and top end to Little Sahara once, idled around the pits a little and said screw it and went out and rode balls to the wall all night with no issues (no nikasil) just a ProX310 jug with a fresh Wiseco and .010 overbore
In my opinion I think it's ok as long as there is a load on the engine and you're not panic reving with no load.
Good stuff as always. I’ve always done pretty much how you said you do yours. My only difference would be that I ride fairly hard the first time. Not 100% balls out but I’d say a good 80% run for a full tank running a little on the fat side. I’m sure this thing will be just fine with what you said you’re gonna do 👍🏼 looking forward to seeing the graphics all done 👊🏼👊🏼
Love your videos man cant wait to see it hauling ass. I'm working on rebuilding a 1998 yamaha 350 warrior I have almost every thing to do a complete rebuild I hope my build turns out as good as your do.
I'm sure it will be a beast dude; good luck with your build!
I’m about done with a complete rebuild on a 1999 yz 125… my factory Manuel states a lot different then anything I find on the web… it states mix 15-1 and a few start ups… check plugs they will be rich, ride easy 2 times going up in rpm and right off… drain gas replace plug and it’s race ready.
Mike thank you so much for doing a video on this as per request. I have heard a lot of different ways of doing this as you said. But I think this is a good one .I’m going to use it on my new top end rebuild for my RM 125. Thanks again Bro! Be safe riding this weekend ! 🤙
Thank you as always for watching Justin 🤘🤘
It like your reading in mind that's exactly what I do.
I have been rebuilding 2 bangers for a little over 30 years now.
One thing I never have people talking about
Is altitude it make a big difference in tuning the bike.
I'm looking forward to messing around with Lectron carbies and would love to see you put one on your quad
Glad to see have 40K subscribers now, Congrats Mike! 2- 5 minute heat cycles, than ride it kinda easy for a few minutes, than go for it!
I'm a 5 heat cycle guy. I don't tell anyone they're wrong because it's my bike and I'm careful. Especially with 2-stroke forged aluminum pistons which I drilled oil holes with the cold seize factor. My IT 250 is running strong on a 27 hour topend. I also ran one tank 24 to one with those heat cycles then I changed back to 32:1.
You hit the nail on the head when you said ask 10 different people 10 different answers
Glad to see you fixed the kicker that was driving me nuts.
Michigan guy here, I got lucky and found skat tracks on wheels with front tires too for $400 shipped!! Maybe if I’m even more lucky I’ll see you at the dunes!!
Doesn’t matter what you do it’s your vehicle you spent your time and money on it you get to do what you want to do with it if you want to go balls on the wall with or not don’t let people tell you what to do.
dude you do some awesome work. if you didn't know already lol you are talented. Your builds run as good as they look. You make this look easy but its not. This build absolutely tops the banshee you did imo. Love both builds but this build is insane in the best kind of way dude... This one was next level for sure
It never hurts to break in a motor. But you can probably get away with just a good warmup
That’s what I’ve done on all my engines Since my yz 125 when I was 11 I researched and made my choice and that’s what I’ll stick to
Amazing job man, been following the build since the beginning. I’m a die hard dirt bike guy but you really do a good job making it entertaining. Keep it up!
I usually do 2 heat cycles, then ride for one tank or 2 hours with varying load, no lugging no running it out, after that rip it. I usually leave the pre mix at 32:1 and leave the jetting alone
Thank you for the feedback Brendan MX, I appreciated you watching my video!
Never done a 2-stroke, but on 4-strokes the first heat cycle is to bring it up to temp. Making sure fluids are topped up and moving, using the cheapest oil that meets specs, all parts well lubed with lucas engine break in. Also never letting it idle more than 10 seconds, and never over 50% throttle. Then a second the next day in the same manner. The third i will ride taking it easy, while never going past 75% throttle. Then i change the oil. The oil will now be factory to that model. Then run a full tank as if i would normally ride but at only 90%. Then another oil change and let it rip.
I run cyclones on my banshee at the dunes. Don’t dig yourself into holes and you’ll do fine.
I’d run richer than 40:1 at the dunes, they’re hard on things, especially 2 strokes 🤘🏼
Thank you for this feedback man! I feel a little bit better about the cyclones lol
@@MichaelSabo i definitely agree with the guy above dune riding you definitely need a little bit more oil just because the engine is working waaaaay harder and I am a amsoil fan from many years of experience
Michael Sabo I’m not sure if you’re already at the dunes, but it’s warm up here this weekend, id run 30:1 MAX.
Such a sick build brother!!!!can't wait to see u out rippin fully together and broke in!!!!
hearing that LED said the same thing i do for my first ride on a new build . i think its safe to say ive been around 250R's for a while and know a thing or 2 lol
I'm only 5 hours from silver lake and i still haven't been there yet. I plan on going this year
LTR Brake pistons will fit in the front only as the rear is to long compared to OEM. I know this because I tried. 😑
Sick build man,love watching your channel. Sounds absolutely mint. You should be proud of what you have achieved. Keep up the good work. Looking forward to the next vid👊.
Make sure u check torque on head bolts if u haven't already
That’s a nice shot with the 2 stroke exhaust blowing in front of that new silverado front end.
Check the Silver Lake rules Mike, you need a spark arrester and 94db max before they will let on the dunes.
3-6 heat cycles of 15/20 minutes of various rpm. Then easy on that first tank of gas constantly pulling the plugs. I never go past mid throttle so I get a good reading on how it cruises and the mid range. Once you have that the rest is gravy
Yes I'm recovering from a munched thrust washer in my zilla, I took my time and heat cycled it 3 times after the rebuild. No hurries here either
Opinions are like A55holes every one got one......, Mike Do you....let them
Hate!! I Fckn love this build 🤙🏽 Keep on keeping On Bro🤘🏽
Man that’s a racing machine fs fs nothing against your build but I’d like to see a trx sleeper so completely stock and a fast motor love the builds keepem goin
I built a Eddie Sanders 370 power valve. I gave it 3 ten minutes heat cycles then wot like I stole it, grab gears like a maniac!
Good luck at Silver Lake! It's a blast to ride there!
Those Sedonas will do just fine there... You'd be surprised how well knobbys do in the sand as well!
I’ve broke mine in a few different ways and Ive never been able to tell a difference. All of them seemed to work fine. When I brought home a brand new Yfz450 in 2005, I decided I’d make up my own 7 day procedure of riding it easy for a week-1/4 throttle max 2days,1/2 throttle max 2days,3/4 throttle max for 2 days, and on day 7 I let it rip. It makes more sense in my mind riding it around easy for breaking it in instead of putting a fan on it and sitting in one place, doesn’t seem natural. I actually asked the dealership about performing heat cycles at home and they kinda laughed and said nobody ever does that. I wondered why is breaking in a rebuilt engine any different than one that’s fresh out the crate with zero ride time? I imagine 99.9% of people who bring home brand new machines from the dealership don’t perform heat cycles and just go ride. A rebuilt engine I’d think could be more laxed with already “broken in” and used other internals. Idk man.
In the 1950 the tolerance were not as good as today so the break in was important to mate the part in the trans and all the gear in the engine and oil pump
Today you only need to seat the ring and its done in the first 30min of running after that the cylinder crosshatch is gone
Thanks for the info I just got done putting an arctic cat 550 in a Polaris trailblazer 🤙
I run 3-5x 20 minute heat cycles then I let it sit at idle with a blower fan at the motor for about 6+ hours. Then I change the oil and ride easy for the first tank. I change the oil again before riding hard.
Dude load up and come to the 250r legendary tour meet up in Little Sahara Oklahoma at the end of September. Should be 40-50 250rs out there or more.
Hey man can wait to see you this weekend hopefully we can do some ripping on the dunes 🤙🏼
Looking forward to meeting you too 🤘
That’s funny about the shock from the tether. Except when it happened to me. Are follies are much more comical the more common the problem. In all fairness, the wires off the tether kill are NOT labeled, just 2 black wires as we know 💨💨😎💨💨
I miss the dunes my favorite spots are glamis and pismo beach in Cali you will have a blast dude with any paddle tire have fun
Thank you bro, I want to make a trip to Glamis and Pismo one day.
You would love Ronnie Macs break in method!
hahaha
Raced for many years in CA. My job was to ride em not fix em, but a couple 10 to 15 minute heat cycles is what every builder I knew did... they always stressed complete cool down between cycles. I would launch that 250R 100+ feet all day...
That's a damn good video on breaking in been dragging feet on firing up my build lot of $ into it n the instructions I got I'm struggling to do it. Mini revs at idle thats what I'm gunna do
First tank on my trx I use a conventional 2 stoke oil. Never wide open. Then I switch to maxima 927. Synthetic oil can cause glazing of cylinder on break in. Then 927 and 110octane.
Thank you for the feedback Ryan Riel, I appreciated you watching my video!
@@MichaelSabo love the 250r stuff. It's a niche within a niche. Those who have one are usually die hards for them. I have had mine for 14 years. Not much stock.
So many right ways to do it man. I do a tank of fuel mixed a bit heavy with some heat cycles and common sense. Minimal wot Check torque on cyl and head. After that it’s game on. Run the piss out of it.
4 strokes I pretty much warm them up and run the shit out of them.
Like you said I race desert so it’s 100miles races and I raced balls to the wall without Breaking it in and its running strong after another 120 mile race and some practice in between , 4stroke though yfz450r.
Awesome dude! I appreciate hearing this feedback!
Life long silver lake here Mike. Get a hold of me and I'd love to show you the ropes around the place. Got my fully built 350 dune banshee ready for you try and keep up with too.. lol maybe then after the place kicks our ass I could take ya for some rounds in the buggy. Place is just up the road and it's my Achilles heal.. place is such a blast!
I was always told with a two-cycle that you want to get them running and idling.. but the first time you like really got them out you want to get them high in the RPMs n under a load .actually get that motor warm like warm warm..
It sounds so good I have watched this video like 3 times now just to heat this beast
That quad is awesome I want a 2 stroke 🔥🔥🔥
You want one until it explodes
Wich it will
@@_T_R_E_V_O_R_ do they explode in pieces and shatter all over the track?
@@MxHDXB well that seize and then dont run anymore
M0 H it’s a Honda it will run forever 😉
I do pretty much the same thing, I do 3 heat cycles for 15 minutes each but on the first one I let it sit at idle then the second one I'll start reving it then on the third one i putt it around then after that I run it hard
I like this method; thank you for the feedback man!
Man your doing great don’t even worry about it.....lol I know it’s hard to ignore sometimes but obviously you know what your talkin about your shit always looks killer and runs like a top....life a garden man dig it......rock on brother !!!!!
The dunes are hard on shit to. That sand is not good for brakes and just everything 😂
Yep gotta remove a arms swing arm and chain clean and lube after every trip or you will regret it. It's also hard on plastics
My engine guy told me, start it and ride it hard. The exhaust gases will help seat the rings faster. But this was always in my twin sled engines, the new plasma coated cylinders in the new skidoo's are balls to the walls out of the box. But I am a firm believer in whatever works for you, go with it
I do the same thing, but I ride to add a touch of load to the scenario, gets things bedded nicely :-)
As a Precision machinist of 15 years. I Do a fair amount of heat treating as well as flame straightening and bending. I would not run a rebuild without heat cycles. In my opinion a engine that is cycled first will last longer potentially. Might as well give it every chance to thrive.
I think engne break in is important. I just bought a new 2024 ktm 300 and i tried to baby it the first few rides. I probably should have done more heat cycles but i was too excited to not ride it. The only thing my manual says is to keep it under 70% throttle for the first 3 hours
I wish I could find a good project bike to do I think it would be fun to do but got to have some money tho
Best way to break in is under a little load. Also heat cycles, just drive easy and calm. Sometimes little more rpm's. It sounds scary, but sometimes even pretty high rpm's. Don't stay in low rpm for the hole time. After 1 or 2 gastanks you are good.
Thank you Leroy De Vries!
@@MichaelSabo everybody has their own feel to it.
If it’s a new machine I just follow the manufacturer’s instructions but a fresh rebuild I always run 3-4 easy tanks though it with it warmed up properly each time and I’ve had them last 200+ hours
Glad to hear your going to silver lake bro! I live right up in that area & it's my favorite place to ride.
Dude I've said it many times, that R is bad ass, and it sounds sweet, it's your build break it in how you see fit, you have built enough engines and you know what your doing don't listen to the haters. I usually run a tank of fuel on a easy ride, then let it rip, (2 cycles). Anyway the R is bad ass bro I love it. 👍👍
that thing is pretty snappy man. cant wait for the first ride vid.
I do 3 -5 heat cycle( cold start to completely warmed up rev it only half throttle . After that I only go half throttle on the first tank of gas. Come second tank I kinda ride it like I stole it! Have fun ripping it.
Plus where I live we got miles of Forestry Dirty Roads. Old logging trails. I go cruise those until I go through my tank of gas.
She sounds good man!
I usually do a few 10 minute heat cycles on my builds then 1st ride i will stay off the rev limiter for an hour or so after that i don’t go crazy but ride it a little harder after that change the oil and ride the hell out of her! Ive had good luck over the years w my builds especially w racing these things but i usually do a new piston every 20hrs seeing has i run H/C pistons!
New quad is running good getting 4 holeshots and 4 wins and even a couple record overalls for me 😁
I usually ride it for heat cycles, staying under half throttle. Always heard the rings seat better having the engine under load. I honestly don't think it matters much as long everything is put together properly.
I'm excited to see that thing rip at silver lake. Definitely one of my favorite places to ride
Holy crap. Awesome videos. Nice job editing and great mechanical work. You are particular like me. Been watching for days!!:) ride safe!!
Jake the garden snake has a great break in video. He shows how the factories do it when bikes come off the assembly line and they break in the engine at full throttle. I am just like you tho, it is scary doing hard break ins.
That sound tho. Think its my new ring tone haha. Sick build man
Don’t really think there a wrong way...if it works it works...sweet video...🤘🏼...
I agree with your look on brake in I've just always went with a tank of gas and I always went little rich then mix gas haul ass ........... FYI it's a 2stroke people you don't hold it wide open forever or your going to blow it up again an again
Two strokes actually like to be held up high in the rpms, so they don't get clogged up with oil. 👍
Key word in there """Forever"""
I do my breakins just like yours! Ive always ran 32/1 in ALL my 2strokes tho. Quads Sled boat anything
You r doing it the best way possible! I do the same thing. Using a temp gun helps as well!
i dont see how this is considered controversial when everybody does this . crank it up play around with it getting it hot letting it cool and repeating . i see nothing wrong with making sure your build it right . these people that say go out the box like you said get rebuilt after every race . ive seen and know people that do that on 2 stroke dirtbikes . me personally i dont have the money to rebuild my bike after every race and i think its a waist of money . thats people that are sponsored lol must be nice . and as far as best oil everybody knows klutz is the best lol
New sub here. Sick bike btw. Screw scat crap paddles I've never had luck with them. You can never go wrong with Sand Stars.
Thank you for watching my video and for subscribing One OG Redneck!
every amateur and national motor ive ever built - 15 min heat cycle, check torque, 10 min heat cycle, check torque, ride it like you stole it.