Hi Glen... The carving wasn't too bad.. it was the sanding that took a long time... My pleasure... have a lovely week... Take care my friend...All the best.....Andy
Hi Matt... Thank you so much.. I'm glad that you liked it... Yes.. a lot of work... I was relieved when it all worked out well... Take care my friend...All the best.....Andy
Hi Val... I'm really pleased that you liked it... I do like to keep things simple if possible... Thank you so much... Take care my friend...All the best.....Andy
Hi stg61... Thank you very much... I'm glad that you liked it... My pleasure and I will try to keep them coming... Take care my friend...All the best.....Andy
Absolutely beautiful.. I really enjoyed watching you work.. Turn a little lid for the bowl, any young girl would love to have one for her dressing table.
Hi Clayton... Thank you so much for your kind words... I hope that you will enjoy making yours... Send me a picture... Take care my friend and all the best from Andy
Hi Huw... Thank you very much... I was a bit worried about flattening the rim.. it could have gone badly... but worked out well.. Haha.. rain... have you had the snow? Take care my friend...All the best.....Andy
Great job on this bowl. regarding that marker when sanding, I do that same thing with marking where I started or changed stiches when crocheting in the round. In that case you have to use a stich marker.
Hi Sandie... Thank you very much... Ita surprising how often you can find similarities between different hobbies... Take care my friend...All the best.....Andy
Hi David... Thank you very much... If you do give it a go.. get a good wood rasp ... it will save a lot of work... I wish you the best of luck with your new hip and a speedy recovery... Take care my friend...All the best.....Andy
Hi Bruce... Thank you so much... I'm glad that you enjoyed this one... WOW...that's amazing... you must really love bowl turning... I would love to see some pictures... I haven't turned many bowls.. in fact in the 10 years that I have been woodturning I have only turned a grand total of 24 bowls ... crazy ehhh... Take care my friend...All the best.....Andy
Hi Ted... I'm glad that you enjoy watching my little projects develop... Yes.. the flutes worked out really well... My pleasure... Take care my friend...All the best.....Andy
Hi Jim... Thank you very much... It would have looked good on a large bowl but I was glad that I decided to try it on a small one 1st... Haha.. Take care my friend...All the best.....Andy
That is just beautiful, Andy! It's the kind of thing I would like to make but don't want to invest the 20 minutes required to accomplish the outcome. LOL! It truly is a work of art and I really do like it, a lot! Well done! 😊 Phil
Hi Phil... Thank you very much... You wouldn't believe how hard I had to push myself to get this one finished within the 20 minute period...🤣 I'm really pleased that you liked it... Take care my friend...All the best.....Andy
Hi Jim... Thank you very much... I hope that you will enjoy making yours... get a good wood rasp.. it will pay dividends... Thank you again... Take care my friend...All the best.....Andy
Hi Mark... Clever editing makes it look easy... Haha... Thank you for your kind words.. I'm glad that you liked it.. Take care my friend...All the best.....Andy
Hi Mark... Thank you so much for your kind words and for your support... I'm glad that you are enjoying my videos... Take care my friend...All the best.....Andy
Hi Sandy... Thank you so much... I'm glad that you liked it... A good round rasp will make the job much easier... Take care my friend...All the best.....Andy
Hi Myk... Thank you very much... If you have them... you must use them... Haha... Yes .. the tennons did work very well... it was a really good support for doing the carving... Take care my friend...All the best.....Andy
Hi Steve... Thank you so much... It's been something that I have been meaning to do for a while now so I'm glad that it worked out... Take care my friend...All the best.....Andy
Hi Mark... Thank you so much... I do try to keep my projects interesting and different...I'm glad that you liked this one... My pleasure... Take care my friend...All the best.....Andy
Hi Jonathan... I'm glad that you liked this one... It was a lot of work, but I really enjoy doing something that’s a bit different... My pleasure... Take care my friend and all the best from Andy
I was turning some very hard Japanese maple today. I was thinking how could I add a spiral carving to the outside. I have not seen anyone do that on RUclips. But the realization that this wood is incredibly hard made me rethink my decision. Then I sit down to relax tonight check out RUclips and Andy is turning a spiral fluted bowl. I am impressed and love the final look. Next time I am turning something softer than stone I will have to give it a go. Perhaps a nice Barley Twist would look brilliantly as well… great job Andy, very well done.
Hi Mathew... That sounds like a wise decision... The Iroko that I used was fairly easy to rasp down and sand... I would not have liked the wood to be any harder... I'm glad that you liked this project and hope that if you do give it a go that you will enjoy making yours... How did your Japanese Maple turn out?... I'm not sure how the barley twist would work... sounds nice though... Thank you... Take care my friend...All the best.....Andy
@@AndysCornishCreations it turned out well. Was able to show off some spalting, and a little bit of curly figure. Still working on the finish to avoid blotches and best show off the wood.
@@AndysCornishCreations It has been several years but there was a great youtube video on turning a Barley twist on the lathe. It may be a bit difficult to do on a shaped vessel. I wish I could recall the channel.
Hi Steve... Thank you.. I'm glad that you liked it... If you do give it a go.. get a good round rasp... it makes the task so much easier.. Take care my friend...All the best.....Andy
Hi Thom... I hope that you are enjoying your apprenticeship... Thank you so much for your very kind words... My pleasure... Take care my friend...All the best.....Andy
Beautiful piece Andy! Love the texture, my guess would have been that you had power carved it, nope, all by hand! Fantastic! Thanks for sharing, take care mate.
Hi Pog... Thank you for your kind words... I'm glad that you liked it... Never really got on with power carving... I'm a bit old school... Haha.. My pleasure... Take care my friend...All the best.....Andy
Hi BG... Thank you very much... Iroko is a hardwood but it isn't actually all that hard to work... It's used a lot in joinery shops which is where I managed to get some... Take care my friend...All the best.....Andy
Another beautiful project, Andy. To mark out the flutes by eye and form them so accurately by hand demonstrated the breadth of your exceptional skills such that you ended up with another superb example of what can be created in the craft of woodturning. It's a real privilege to watch you produce such items. Amazing work. Best of luck. Steve Jacques. (Pembrokeshire Woodturners).
Hi Steve... I'm glad that you liked this one... Thank you so much for your kind words... very kind of you... I think that I had a bit of luck as well the way that the lines worked out when marking it out... Thank you again... Take care my friend...All the best.....Andy
Hi Ashley... Yes... good idea... my lathe does have indexing but I have never tried to use it ... Perhaps I should give it a go... Take care my friend...All the best.....Andy
Hi Ray... Thank you so much... Yes.. a lot of hand work.. luckily it was a small bowl so it didn't take too long... Haha.. I'm sure you would... Take care my friend...All the best.....Andy
Hi Ken... Welcome to my channel... I'm glad that you liked it and I hope that you will enjoy making yours... Get a good rasp.. it will help a lot.. And yes.. good luck... Take care my friend...All the best.....Andy
It's a beautiful little bowl! The flutes are wonderful, once again demonstrating your skill at the details. The organic shape of the bowl makes me think of a seed pod or maybe even some kind of tropical fruit! Very lovely, Andy!
Hi Gwynn... Thank you so much as always for your kind words... Ahh yes.. I hadn't thought about that... it does resemble something like that... I'm glad that you liked it... Take care my friend...All the best.....Andy
@@AndysCornishCreations l am wondering if a bowl like this could be made of black walnut. I will have to give it a try. Beautiful workmanship on this one as always.
@@randallnelson2452 I don't see why not... it would look amazing... Get a good round rasp... it will make the job much easier... Take care my friend...All the best.....Andy
You might be nuts... very nice work. Every time I do something way out of the norm and people question my sanity, I will send them over to see your work. So good!!!❤
Hi Brian... Thank you... I think... Haha... You send as many doubters as you like... Who wants to be " normal " anyway... Haha... It would be lovely to see some of your out of the norm work... Take care my friend...All the best.....Andy
Hi Andy, I love the design, simple but stunning. I personally love working with Iroko, such a nice wood. Lots of sanding and a great finish, thanks for sharing.
Hi Jim... Thank you very much.. I'm glad that you liked it... I have had a few pieces of Iroko from a local joiners shop... very handy and a bargain... My pleasure... Take care my friend...All the best.....Andy
Hi Rick... Thank you very much... Haha... it still took me about 3 hours.. and it is quite small .... luckily... Take care my friend...All the best.....Andy
Hi Beverley... I'm glad that you have found me and I hope that you will enjoy my videos... Phil is a great guy... Take care my friend...All the best.....Andy
Hi Dennis... Thank you very much... Even though there was an awful amount of sanding on this one I still really enjoyed making it... I hope that you will enjoy making yours and I'm looking forward to seeing the results... Take care my friend...All the best.....Andy
What's not to like about this bowl? That is really beautiful! I admire your patience in getting those grooves in place; they really make the piece stand out.
Hi Mark... Thank you so much as always for your kind words... I'm glad that you liked it... Yes.. the flutes were a lot of work but it's something that I have been meaning to try for a while now... Take care my friend...All the best.....Andy
Hi Andy! How beautiful, what a lovely idea 👍🏻☺️ The carved flutes came out really well 👋🏻 Every now and then you seem to get the itch to grab a chisel and a mallet and off you go 😉😂 Well done, Andy, I could think of at least ten different ways of putting it to good use, half of them involve eating 🫣👍🏻👏🏻 Have a lovely Sunday evening 👋🏻😉👋🏻 Byeeee, Jude
Hi Jude... Thank you again... Haha... I wish that I could have more time in the workshop... I would like to do some proper woodcarving.. leaves an flowers etc... ahh well.. one day.. I'm afraid that the bowl is a lot smaller than it looks on the video so you wouldn't get much food in it... More of a side bowl for extras .. perhaps... Take care my friend...All the best.....Andy 👋😉👋
@@AndysCornishCreations So the perfect diet bowl then ☺️😎 I can already see the TV ad: Lose 10 pounds a week by eating anything you can put your fingers on exclusively from the new and revolutionary ACC diet bowl!!! Get two if you order before noon plus a free bag of dog treats if you order five 😂 Send order to ACC International, Bahamas 🇧🇸
Andy , I totally love this little bowl, not seen one like this before. Your presentation is spot on, just the right amount of content, will give this one a go. Cheers Andy from the Somerset Chapter.
Hi Garry... I'm really pleased that you love it... I thought that it would be a bit different from the norm... Thank you so much for your kind words... I hope that you will enjoy making yours.. you could send a picture if you wouldn't mind... Great to hear from the Somerset Chapter... I am a Mason myself...but unfortunately just a Monumental Mason... ( sorry) Take care my friend...All the best.....Andy
Hi Dave... Thank you very much... I'm glad that you have enjoyed this one... WOW.... that's a lot of bowls... well done... I don't think that I have turned more than about 20 bowls in total... Take care my friend...All the best.....Andy
Hi Dave... Sorry... bit of a senior moment... The reply that I sent to you was meant for someone else... Haha 🙄.. This chap has turned a bowl every day for the last 4 years... imagine that !! I was just telling him that during my 10 years of woodturning I have only turned a grand total of 24 bowls... As you can guess. . I'm not a big fan of bowl turning... And as an answer to your comment... Thank you very much.. I'm glad that you liked it... Haha... I had to push myself to the limit to get it finished in 20 minutes....... NOT... Haha Take care my friend...All the best.....Andy
Hi Luie... Thank you so much.. I'm glad that you liked it... Clever editing makes it look easy... Haha... I'm definitely sure that you would do a great job making this one... Take care my friend...All the best.....Andy
Hi Trurex007... Thank you very much...I'm glad that you liked it... Haha... yes.. it was a bit of a chore...and a few hours work... Take care my friend...All the best.....Andy
Hi Mike... Thank you very much... The bowl shape and concept is very simple... just a lot of sanding to get a nice finish... Take care my friend...All the best.....Andy
Nice to see you Andy, how's things? Really enjoyed your video thanks - lovely work on this project - you made it look so simple! All the best to you and yours, look forward to the next one!
Hi Paul... I'm well thank you... how are you doing? I'm glad that you enjoyed this video and the project... Haha... clever editing made it look simple... Thank you so much and all my best wishes to you and yours... Take care my friend...All the best.....Andy
I can do the turning. No patience for the carving. Thank you for sharing. Have a great day and stay safe.🙂🙂
Hi Glen...
The carving wasn't too bad.. it was the sanding that took a long time...
My pleasure... have a lovely week...
Take care my friend...All the best.....Andy
...that is really cool, Andy...a lot of work, but it turned out great!...very well done...👍
Matt
Hi Matt...
Thank you so much.. I'm glad that you liked it...
Yes.. a lot of work... I was relieved when it all worked out well...
Take care my friend...All the best.....Andy
What a great idea
Hi Chris...
Thank you very much...
I enjoyed making this one... except for the sanding that is... Haha..
Take care my friend...All the best.....Andy
Really really nice Andy! Brilliant that you hand carved with no fancy electric tools or fancy jigs, super well done! 😃
Hi Val...
I'm really pleased that you liked it...
I do like to keep things simple if possible...
Thank you so much...
Take care my friend...All the best.....Andy
Thanks Andy. A nice piece of work and thanks for showing me how to make a fluted bowl. Keep it up. Slainge.
Hi stg61...
Thank you very much... I'm glad that you liked it...
My pleasure and I will try to keep them coming...
Take care my friend...All the best.....Andy
This really is beautiful! "A lot of sanding" though is pretty much an understatement. Remarkable!
Hi Jon...
Thank you so much...
Yes.. a lot of sanding but I really enjoyed making this one...
Take care my friend...All the best.....Andy
Andy, that's gorgeous, my friend! Love it!
Hi Billy...
I'm glad that you liked it...
Thank you so much as always...
Take care my friend...All the best.....Andy
Absolutely stunning❤❤
That is a beautiful piece of work Absolutely lovely. 👍🍾
Hi Stuart...
Ahh .. thank you so much for your very kind words..
I'm glad that you liked it...
Take care my friend...All the best.....Andy
Smashing Andy. Great Job very well done mate.
Hi Colin...
Ahh.. thank you so much... I'm glad that you liked it..
Take care my friend...All the best.....Andy
Absolutely beautiful.. I really enjoyed watching you work..
Turn a little lid for the bowl, any young girl would love to have one for her dressing table.
Hi Eliza...
Thank you so much for your kind words...
Good idea... a lid would make a great addition...
Take care my friend...All the best.....Andy
Very nice bowl! Thanks for sharing 👍🏽
Hi Greg...
Thank you so much...
My pleasure...
Take care my friend...All the best.....Andy
I don’t think I have ever thought I could make something like this. But now I do. You are awesome.
Hi Clayton...
Thank you so much for your kind words...
I hope that you will enjoy making yours...
Send me a picture...
Take care my friend and all the best from Andy
Amazing work Andy.
The flat rim reveals the spirals perfectly.
Nice to hear the rain once again. LOL.
Take care my friend.
Cheers, Huw
Hi Huw...
Thank you very much...
I was a bit worried about flattening the rim.. it could have gone badly... but worked out well..
Haha.. rain... have you had the snow?
Take care my friend...All the best.....Andy
@@AndysCornishCreations Hi Andy, Yes we woke up to 4" of snow Wednesday morning but it was all gone by Friday morning.
Great job on this bowl. regarding that marker when sanding, I do that same thing with marking where I started or changed stiches when crocheting in the round. In that case you have to use a stich marker.
Hi Sandie...
Thank you very much...
Ita surprising how often you can find similarities between different hobbies...
Take care my friend...All the best.....Andy
Oh,oh,oh!Very,very nice!Beautiful!!!!
Hi there...
Thank you so much...
I'm glad that you liked it...
Take care my friend...All the best.....Andy
Wow, what a great technique. Thanks for soldering that Andy. I will give that a try....probably once I get my new hip and am a touch more mobile.
Hi David...
Thank you very much...
If you do give it a go.. get a good wood rasp ... it will save a lot of work...
I wish you the best of luck with your new hip and a speedy recovery...
Take care my friend...All the best.....Andy
Very neat technique. I enjoyed the inspiration. I turn a bowl a day for last four years.
Hi Bruce...
Thank you so much... I'm glad that you enjoyed this one...
WOW...that's amazing... you must really love bowl turning...
I would love to see some pictures...
I haven't turned many bowls.. in fact in the 10 years that I have been woodturning I have only turned a grand total of 24 bowls ... crazy ehhh...
Take care my friend...All the best.....Andy
Good little Bowl Andy like the extra effort put into this one 👍👍
Hi Brian...
I'm glad that you liked it...
Yes.. no pain..no gain... Haha
Take care my friend...All the best.....Andy
Always enjoy watching your creations take shape Andy! The flutes make your little bowl really special. Thanks for sharing .
Hi Ted...
I'm glad that you enjoy watching my little projects develop...
Yes.. the flutes worked out really well...
My pleasure...
Take care my friend...All the best.....Andy
nice project andy, love the fluting. thanks for sharing
Hi SKKrafts...
I'm glad that you liked it...
My pleasure...
Happy New Year..
Take care my friend and all the best...Andy
Very pretty Andy. Would look great on a big bowl but boy that'd be a load of work
Hi Jim...
Thank you very much...
It would have looked good on a large bowl but I was glad that I decided to try it on a small one 1st... Haha..
Take care my friend...All the best.....Andy
Brilliant works fine sir. Incorporating multiple styles of woodworking is beautiful.
Hi Clyde...
Thank you so much for your kind words...
Take care my friend...All the best.....Andy
Molto bello sia per il disegno che per l' accuratezza dell' esecuzione. Un lavoro così meritava dimensioni maggiori.
I enjoyed watching you adding a little carving to the bowl, very pretty as always great work.
Hi Gerda...
Thank you as always for your kind words...
I'm pleased that you enjoyed this one...
Take care my friend...All the best.....Andy
That is just beautiful, Andy! It's the kind of thing I would like to make but don't want to invest the 20 minutes required to accomplish the outcome. LOL! It truly is a work of art and I really do like it, a lot! Well done! 😊
Phil
Hi Phil...
Thank you very much...
You wouldn't believe how hard I had to push myself to get this one finished within the 20 minute period...🤣
I'm really pleased that you liked it...
Take care my friend...All the best.....Andy
Love it! Will give it a try.
Hi Mpham321...
I'm glad that you liked it...
I hope that you will enjoy making yours... get a good rasp...
Take care my friend...All the best.....Andy
A very nice bowl Andy I very much enjoyed all the different techniques you used 👍👍 thanks Paul.
Hi Paul...
Thank you very much...
I'm glad that you enjoyed this project...
Take care my friend...All the best.....Andy
Very nicely done Andy, another project that I will have to give a go. Thanks for sharing.
All the best to you.
Regards Jim
Hi Jim...
Thank you very much...
I hope that you will enjoy making yours... get a good wood rasp.. it will pay dividends...
Thank you again...
Take care my friend...All the best.....Andy
Very interesting and beautiful sir thanks for showing us how to do this.
Hi David...
Thank you so much for your kind words...
My pleasure...
Take care my friend...All the best.....Andy
Gosh, you make that look easy mate. Thanks Andy, that was really enjoyable and inspiring.
Hi Mark...
Clever editing makes it look easy... Haha...
Thank you for your kind words.. I'm glad that you liked it..
Take care my friend...All the best.....Andy
Glad your subscribers are increasing. You are definitely worthy of the increase and one of my favs. Thanks!
Hi Mark...
Thank you so much for your kind words and for your support...
I'm glad that you are enjoying my videos...
Take care my friend...All the best.....Andy
Very lovely little bowl.
Hi Judith...
Thank you so much...
Take care my friend...All the best.....Andy
Very pretty 🙂
Hi jen...
Thank you so much...
Take care my friend...All the best.....Andy
I loved this video . Going to give it a try this week. Thankyou 🙏👍👋
Hi Sandy...
Thank you so much... I'm glad that you liked it...
A good round rasp will make the job much easier...
Take care my friend...All the best.....Andy
Lovely job Andy keep them coming
Hi Deamon...
Thank you very much...
I will try.... Haha...
Take care my friend...All the best.....Andy
That's a very nice effect with the spiral flutes on the sides of that little bowl. Thanks for sharing, Andy.
Hi Jim...
I'm pleased that you liked it... I was happy with the way that it turned out...
My pleasure...
Take care my friend...All the best.....Andy
Beautiful bowl
Hi Miclas...
Thank you so much...
Take care my friend...All the best.....Andy
Fancy Andy! Very nice indeed.
Hi Normagene...
Thank you very much... I'm glad that you liked it...
Take care my friend...All the best.....Andy
Very nice bowl Andy
Hi Alan...
Thank you... I'm glad that you liked it...
Take care my friend...All the best.....Andy
Fantastic idea. A beautiful piece by a very creative craftsman!
Hi Ed...
Thank you so much for your very kind words...
I'm glad that you liked it...
Take care my friend...All the best.....Andy
Gorgeous Andy.
Hi Jack...
Thank you very much.. I'm glad that you liked It...
Take care my friend...All the best.....Andy
Outstanding!
Hi Beverley...
Thank you so much...
Take care my friend...All the best.....Andy
Very nice little piece. I must put my carving chisels to use sometime. I like the internal tenon idea, a very neat solution to a problem.
Hi Myk...
Thank you very much...
If you have them... you must use them... Haha...
Yes .. the tennons did work very well... it was a really good support for doing the carving...
Take care my friend...All the best.....Andy
Looks alsome realy nice bowl
@@claudepotter7763 Hi Claude...
Thank you... I'm glad that you liked it... I enjoyed making this one...
Take care my friend...All the best.....Andy
thank's for this one.
Hi Allan...
My pleasure...
I'm glad that you liked it...
Take care my friend...All the best.....Andy
Very well done. Really inspiring, Thanks for sharing!
Torben, Denmark.
Hi Torben...
Thank you so much for your kind words...
Great to hear from Denmark...
Take care my friend...All the best.....Andy
Nice work Andy not seen one of these love the look
Regards
Steve UK London
Hi Steve...
Thank you so much...
It's been something that I have been meaning to do for a while now so I'm glad that it worked out...
Take care my friend...All the best.....Andy
Really nice project! I am intrigued by flutes and other special features, and I really like this effort. Thanks for sharing!
Hi Mark...
Thank you so much...
I do try to keep my projects interesting and different...I'm glad that you liked this one...
My pleasure...
Take care my friend...All the best.....Andy
I also envy the size of the workshop. If mine was that size, I would have much more clutter!
Hi Mike...
Haha... well I do wish that I could keep mine tidy...
Take care my friend and all the best from Andy
Just found this one Andy, what a lovely bowl you put a lot of effort into this one thank you for sharing
Hi Jonathan...
I'm glad that you liked this one...
It was a lot of work, but I really enjoy doing something that’s a bit different...
My pleasure...
Take care my friend and all the best from Andy
I was turning some very hard Japanese maple today. I was thinking how could I add a spiral carving to the outside. I have not seen anyone do that on RUclips. But the realization that this wood is incredibly hard made me rethink my decision. Then I sit down to relax tonight check out RUclips and Andy is turning a spiral fluted bowl. I am impressed and love the final look. Next time I am turning something softer than stone I will have to give it a go. Perhaps a nice Barley Twist would look brilliantly as well… great job Andy, very well done.
Hi Mathew...
That sounds like a wise decision...
The Iroko that I used was fairly easy to rasp down and sand...
I would not have liked the wood to be any harder...
I'm glad that you liked this project and hope that if you do give it a go that you will enjoy making yours...
How did your Japanese Maple turn out?...
I'm not sure how the barley twist would work... sounds nice though...
Thank you...
Take care my friend...All the best.....Andy
@@AndysCornishCreations it turned out well. Was able to show off some spalting, and a little bit of curly figure. Still working on the finish to avoid blotches and best show off the wood.
@@AndysCornishCreations It has been several years but there was a great youtube video on turning a Barley twist on the lathe. It may be a bit difficult to do on a shaped vessel. I wish I could recall the channel.
Hi Andy, I always fancied having a go at one of these, you did make it look very easy. It does look a lovely piece
Hi Steve...
Thank you.. I'm glad that you liked it...
If you do give it a go.. get a good round rasp... it makes the task so much easier..
Take care my friend...All the best.....Andy
Very nicely done. Simple design and effective.
Hi Howard...
Thank you very much...I'm glad that you liked it...
Simplicity always works out well...
Take care my friend...All the best.....Andy
Well done Andy! Love it!
Hi Brian...
Thank you so much... I'm pleased that you liked it...
Take care my friend...All the best.....Andy
As someone who is currently an older apprentice, I appreciate the way you briefly describe the tools you are using and your humble grace. Thanks!
Hi Thom...
I hope that you are enjoying your apprenticeship...
Thank you so much for your very kind words...
My pleasure...
Take care my friend...All the best.....Andy
Well done, great video! Encourages me to try out new things .
Hi Kevin...
Thank you.. I'm glad that you liked it...
It's always nice to try something new...
Take care my friend...All the best.....Andy
Beautiful piece Andy! Love the texture, my guess would have been that you had power carved it, nope, all by hand! Fantastic! Thanks for sharing, take care mate.
Hi Pog...
Thank you for your kind words... I'm glad that you liked it...
Never really got on with power carving... I'm a bit old school... Haha..
My pleasure...
Take care my friend...All the best.....Andy
Beautiful! Well done
Hi SRSharpe33...
Thank you so much...
Take care my friend...All the best.....Andy
Beautiful piece. I've never heard of that kind of wood. It looks like a pleasure to work with it.
Hi BG...
Thank you very much...
Iroko is a hardwood but it isn't actually all that hard to work...
It's used a lot in joinery shops which is where I managed to get some...
Take care my friend...All the best.....Andy
Very pretty!
Hi Heidi...
Thank you so much...
Take care my friend...All the best.....Andy
Another beautiful project, Andy. To mark out the flutes by eye and form them so accurately by hand demonstrated the breadth of your exceptional skills such that you ended up with another superb example of what can be created in the craft of woodturning. It's a real privilege to watch you produce such items. Amazing work.
Best of luck.
Steve Jacques.
(Pembrokeshire Woodturners).
Hi Steve...
I'm glad that you liked this one...
Thank you so much for your kind words... very kind of you...
I think that I had a bit of luck as well the way that the lines worked out when marking it out...
Thank you again...
Take care my friend...All the best.....Andy
Beautifully done Andy!
Hi Todd...
Thank you so much as always...
Take care my friend...All the best.....Andy
Well done Andy another amazing creation to add to collection 😊👍
Hi Wayne...
Thank you for your kind words...
The cupboard is getting quite full...
Take care my friend...All the best.....Andy
@@AndysCornishCreations u will have to build bigger storage cupboard 👍
Proper job!
Hi Bill...
Meur ras...
Take care my friend...All the best.....Andy
@@AndysCornishCreations Dewch i'n wel!
You could use lathe indexing to mark out the flutes ( if you have it), often 24 divisions or less.
Hi Ashley...
Yes... good idea... my lathe does have indexing but I have never tried to use it ...
Perhaps I should give it a go...
Take care my friend...All the best.....Andy
Very nice Andy! Alot of nice hand work! Not sure I would have the patience!
Hi Ray...
Thank you so much...
Yes.. a lot of hand work.. luckily it was a small bowl so it didn't take too long...
Haha.. I'm sure you would...
Take care my friend...All the best.....Andy
Very nice!
Hi Doug...
Thank you so much...
Take care my friend...All the best.....Andy
Ery nice bowl creation.
Hi Ncwoodworker...
Thank you very much...
Take care my friend...All the best.....Andy
First time viewer. Gorgeous piece. I'm going to give it a try. Wish me luck.
Hi Ken...
Welcome to my channel...
I'm glad that you liked it and I hope that you will enjoy making yours...
Get a good rasp.. it will help a lot..
And yes.. good luck...
Take care my friend...All the best.....Andy
It's a beautiful little bowl! The flutes are wonderful, once again demonstrating your skill at the details. The organic shape of the bowl makes me think of a seed pod or maybe even some kind of tropical fruit! Very lovely, Andy!
Hi Gwynn...
Thank you so much as always for your kind words...
Ahh yes.. I hadn't thought about that... it does resemble something like that...
I'm glad that you liked it...
Take care my friend...All the best.....Andy
@@AndysCornishCreations l am wondering if a bowl like this could be made of black walnut. I will have to give it a try. Beautiful workmanship on this one as always.
@@randallnelson2452 I don't see why not... it would look amazing...
Get a good round rasp... it will make the job much easier...
Take care my friend...All the best.....Andy
Very nice.
Hi Jenny...
Thank you so much...
Take care my friend...All the best.....Andy
Great idea, I really enjoyed it 😀 👍
Hi PJ...
Thank you... I'm glad that you enjoyed it.... 😉👍
You might be nuts... very nice work. Every time I do something way out of the norm and people question my sanity, I will send them over to see your work. So good!!!❤
Hi Brian...
Thank you... I think... Haha...
You send as many doubters as you like...
Who wants to be " normal " anyway... Haha...
It would be lovely to see some of your out of the norm work...
Take care my friend...All the best.....Andy
Great skills
Hi Russ....
Thank you very much...
Take care my friend...All the best.....Andy
Hi Andy, I love the design, simple but stunning. I personally love working with Iroko, such a nice wood. Lots of sanding and a great finish, thanks for sharing.
Hi Jim...
Thank you very much.. I'm glad that you liked it...
I have had a few pieces of Iroko from a local joiners shop... very handy and a bargain...
My pleasure...
Take care my friend...All the best.....Andy
Very nice Andy! It would take me the better part of a day just to do the flutes 😅 A lovely bowl in the end!
Cheers, Rick
Hi Rick...
Thank you very much...
Haha... it still took me about 3 hours.. and it is quite small .... luckily...
Take care my friend...All the best.....Andy
Phil sent us. Beautiful stuff, Andy.
Hi Beverley...
I'm glad that you have found me and I hope that you will enjoy my videos...
Phil is a great guy...
Take care my friend...All the best.....Andy
@@AndysCornishCreations Thank YOU for sharing! Beautiful work is always a gift to the viewer.
Bravo. Très belle réalisation.
Hi Evelyn...
Merci boucoup...
Je suis content que ça te plaise...
Take care my friend...All the best.....Andy
Great work!
Hi there...
Thank you so much...
Take care my friend...All the best.....Andy
Nice little bowl, Andy. I think I may try one. I see many possibilities with the angles of the carved lines. Love it!
Hi Dennis...
Thank you very much...
Even though there was an awful amount of sanding on this one I still really enjoyed making it...
I hope that you will enjoy making yours and I'm looking forward to seeing the results...
Take care my friend...All the best.....Andy
What's not to like about this bowl? That is really beautiful! I admire your patience in getting those grooves in place; they really make the piece stand out.
Hi Mark...
Thank you so much as always for your kind words...
I'm glad that you liked it...
Yes.. the flutes were a lot of work but it's something that I have been meaning to try for a while now...
Take care my friend...All the best.....Andy
Nice work mate!
Hi Cirrus.....
Thank you...
Take care my friend and all the best from Andy
Really nice, Andy. Looked like a lot of work, though.
Bill
Hi Bill...
Thank you...
Yes .. the sanding was a bit of a chore... Haha...
Take care my friend...All the best.....Andy
Hi Andy! How beautiful, what a lovely idea 👍🏻☺️ The carved flutes came out really well 👋🏻 Every now and then you seem to get the itch to grab a chisel and a mallet and off you go 😉😂 Well done, Andy, I could think of at least ten different ways of putting it to good use, half of them involve eating 🫣👍🏻👏🏻 Have a lovely Sunday evening 👋🏻😉👋🏻 Byeeee, Jude
Hi Jude...
Thank you again...
Haha... I wish that I could have more time in the workshop... I would like to do some proper woodcarving.. leaves an flowers etc... ahh well.. one day..
I'm afraid that the bowl is a lot smaller than it looks on the video so you wouldn't get much food in it...
More of a side bowl for extras .. perhaps...
Take care my friend...All the best.....Andy 👋😉👋
@@AndysCornishCreations So the perfect diet bowl then ☺️😎 I can already see the TV ad: Lose 10 pounds a week by eating anything you can put your fingers on exclusively from the new and revolutionary ACC diet bowl!!! Get two if you order before noon plus a free bag of dog treats if you order five 😂 Send order to ACC International, Bahamas 🇧🇸
Haha... I will have to make you my marketing manager...🤪
Salut Andy très jolie travail , belle réussite et belle réalisation bravo j’adore 👍👏👋
Salut Denis...
Merci boucoup...
Tu es trs gentil...
Je suis content que ça te plaise...
Take care my friend...All the best.....Andy
@@AndysCornishCreations salut Andy j’aime bien ce que tu fais et tu as de brillantes idées encore bravo 👏👋
Andy , I totally love this little bowl, not seen one like this before. Your presentation is spot on, just the right amount of content, will give this one a go. Cheers Andy from the Somerset Chapter.
Hi Garry...
I'm really pleased that you love it... I thought that it would be a bit different from the norm...
Thank you so much for your kind words...
I hope that you will enjoy making yours.. you could send a picture if you wouldn't mind...
Great to hear from the Somerset Chapter...
I am a Mason myself...but unfortunately just a Monumental Mason... ( sorry)
Take care my friend...All the best.....Andy
Hi Andy. An excellent piece of carving. Well done. I doubt that it was an easy 20 minute job,though! All the best,Dave.
Hi Dave...
Thank you very much... I'm glad that you have enjoyed this one...
WOW.... that's a lot of bowls... well done...
I don't think that I have turned more than about 20 bowls in total...
Take care my friend...All the best.....Andy
@@AndysCornishCreations Cheers Andy. 20 bowls???
Hi Dave...
Sorry... bit of a senior moment...
The reply that I sent to you was meant for someone else... Haha 🙄..
This chap has turned a bowl every day for the last 4 years... imagine that !!
I was just telling him that during my 10 years of woodturning I have only turned a grand total of 24 bowls...
As you can guess. . I'm not a big fan of bowl turning...
And as an answer to your comment...
Thank you very much.. I'm glad that you liked it...
Haha... I had to push myself to the limit to get it finished in 20 minutes....... NOT... Haha
Take care my friend...All the best.....Andy
@@AndysCornishCreations Cheers Andy. I'm the same as you...bowls don't quite turn me on!
what a great looking piece! You made that look easy! Im sure I would of messed that up horribly.
great vid Thanks for sharing!
Hi Luie...
Thank you so much.. I'm glad that you liked it...
Clever editing makes it look easy... Haha...
I'm definitely sure that you would do a great job making this one...
Take care my friend...All the best.....Andy
Very nice project! Brute strength and sanding, there is no easy other way to get that style.
Hi Trurex007...
Thank you very much...I'm glad that you liked it...
Haha... yes.. it was a bit of a chore...and a few hours work...
Take care my friend...All the best.....Andy
Magnifique 👌
Hi Passion Fario...
Haha...Merci boucoup ...
Take care my friend...All the best.....Andy
Awesome!
Hi SFDUK...
Thank you very much...
Take care my friend...All the best.....Andy
I'll try it.❤
Hi Allan...
I hope that you will enjoy making yours...
Please send me a picture...
Take care my friend...All the best.....Andy
Замечательная идея👍
Hi User...
Thank you very much...
Take care my friend and all the best from Andy
Maravilha show de bola parabéns mestre
Hi Edson.........
Thank you so much...
Take care my friend...All the best.....Andy
Great design Andy ! Haven't seen such a simple(?) idea look so good yet requiring such extensive handwork. Gotta give it a go ! Take care. -Mike
Hi Mike...
Thank you very much...
The bowl shape and concept is very simple... just a lot of sanding to get a nice finish...
Take care my friend...All the best.....Andy
А great job!
Hi Lilofeia...
Thank you very much...
Take care my friend...All the best.....Andy
Molto bello ed elegante
Hi Gianbruno...
Grazia mille...
Take care my friend...All the best.....Andy
мастер от Бога
Hi there...
Thank you very much...
Take care my friend...All the best.....Andy
Nice to see you Andy, how's things? Really enjoyed your video thanks - lovely work on this project - you made it look so simple!
All the best to you and yours, look forward to the next one!
Hi Paul...
I'm well thank you... how are you doing?
I'm glad that you enjoyed this video and the project...
Haha... clever editing made it look simple...
Thank you so much and all my best wishes to you and yours...
Take care my friend...All the best.....Andy