How To Clean & Lubricate A Heckler & Koch P30 Pistol (HD)
HTML-код
- Опубликовано: 15 сен 2024
- I go over how to disassemble, clean, lubricate, and reassemble a H&K P30 handgun.
Breakfree CLP: amzn.to/2BCjS6F
Needle oil bottle: amzn.to/2CumY9L
Tipton Polymer Picks: amzn.to/2CvkVCa
Sign up for my email list here:
www.Mrgunsngear.com
1776 United Shirts link:
bit.ly/2rCn5PW
My Forged From Freedom Shirts:
goo.gl/QsLoK8
mrgunsngear
Mrgunsngear patches/stickers: patriotpatch.c...
www.amazon.com...
t.me/Mrgunsngear
parler.com/pro...
seniorgunsngear
mrgunsngear
Music by Machinima & Epidemic Sound
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including RUclips) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance I include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with intention of driving commentary and allowing freedom of speech.
Amazing that I'm looking at this 6 years later. Replacing the barrel with a threaded barrel and it's been awhile since I've broken this pistol down. Your videos just keep on giving. Thanks yet again, Mike.
Just a heads up you don't need to fully remove the slide lock lever to remove the slide. There is sort of a stopping point when you pull on it at the point your slide will come off with the pin/level still in place.
My exact thought
The variants I've seen actually have a red indicator when you have it pushed out far enough.
Great to see a P30 on the channel. I really like both of mine despite the long reset. They are great shooting pistols. Still IMO the best looking polymer framed pistol on planet earth.
it's sexy for sure
Any good affordable aftermarket triggers for it that will shorten up the reset?
@@it_is_finished I know its a late reply, but the Grey Guns short reset kit is what you want.
5 years late to the party and 2 weeks behind the last comment. But just to echo it, yea Gray Guns makes a trigger reset kit. I think it's like $80. I got it for my P30L. I'd damn near say its mandatory. Takes the reset from almost the entire length of the trigger pull down to like a millimeter. It's so night and day it almost doesn't even feel like the same gun.
@@jonesy9744
Yeh I’ve seen a couple reviews on the kit. Sounds like I need to get one.
Just purchased my first P30. Great video Mike. Thank you
Mr. G&G, thank you for the video. Received a P30L as an anniversary gift, had no clue on how to disassemble it. Gun and two mags with no paperwork. Unbelievable accurate firearm.
Awesome! I couldn't find a single video on how to clean and lube this particular pistol, so this really helps. Thanks!
EXCELLENT VIDEO!!!! Could NOT get it apart until I watched this particular video!!! THANK YOU!!!!!
A beautiful HK P30SK made its way into my collection a couple of weeks ago. I love it so much I'm starting to think I need more HK in my life. I went from Glocks to Sigs and now HK with a random Kimber mixed in. This is starting to become an expensive lifestyle. :)
Excellent video AS ALWAYS.
Just got the P30L in 40 last week shot it for the first time yesterday and it was a very sweet shooting 40 cal. Love this gun it is extremely accurate!
I just recently bought a P30 as my first firearm. Took it to the range a while ago. Great gun. Thanks for the video :)
First time cleaning my P30 using the Hoppes 9 .22-.50 kit and still cleaned up great. Definitely going to go get a cheap toothbrush to help that cleaning process go faster. Thanks for the Video.
I'm looking to buy this exact gun in the next couple of weeks
Just bought this gun. I’m doin as much research as possible. Cleaning guides, handling procedures, the works! I hope you’re enjoying yours! Lookin forward to getting mine!
Love the P30L Lem, still breaking her in with 147's and loving every range visit!
Pushing the slide catch lever all the way out can damage your trigger return spring. l use tooth picks to clean all the square inside corners and slots on the slide.
Glad I'm not the only one that noticed the round loaded backwards in the thumbnail.
Nice work! I'm considering purchasing an H&K P30L in .40Cal soon.
nice
Over 3000 rounds without a single malfunction! after 2000 rounds the trigger really smoothed out . Love mine ! and yeah I have a GLOCK
awesome
Thanks for making this video, I just picked up a P30L
Thanks for the links to cleaning equipment.
It's a little concerning that this video has been up for over 5 years considering it shows an incorrect field strip procedure. Yanking the slide lock all the way out of the frame is not correct, and can damage the trigger return spring. It's also not a particularly fun part to replace.
My favorite 9mm pistol! It's also like my favorite the HK45
Haha. Love the backwards rounds😄 H&K will never live that down.
kodiakcopilot, it's intentional, Google it for the backstory
Black Bullitt I know, that's why it's funny.
I have the P30L with the LEM trigger, love it.
P30L sales probably went through the roof after John Wick
Kyle Noir it should drop after jw 2 where he dumped HK for a glock…
Yeah but everyone and their brother already owns a Glock 34 or at least a 17. They're already featured in every TV show and movie.
CiTY_HuNTeR it was a sad moment in cinema history
That’s what got me on board.
All we can do is wait for JW chapter 3.
wait.. the slide release is captive. if you dont push up on the slide release while dissasembling it lets you remove the slide without having to fully remove the slide release lever. when it click you pushed it out far enough and it wont go out any farther.
Your Hk reviews aren’t long enough so I just come here to get a better look at the guns.
I think POV videos would be badass. That way viewers can get a feel for what it’s like to be behind the gun
Round loaded incorrectly in the mag, could this be related to the shot show incident with their catalog a few years back, I think so.
Kahrisma Thought the same thing.
Question: mine doesn’t have that polished area on the recoil spring, but mine is just black. Does that matter?
I just bought a p30 40sw with Lem trigger 649.00 NIB or about 300.00 less than I paid for the same gun in 2012 I think the go series slowed the sales greatly hence the price drops.
Thanks for the video. The P30 is a bit different than the Rex Zero 1. The takedown is different than every other pistol I've had, which is why I needed the video. The one thing about mine is that the slide locks do *not* come all the way out. Maybe you have a defective one, maybe they changed it, but mine just expands and does not entirely come off. That suits me fine. :)
yours should come all the way out; you may have to wiggle it but it does. Mine isn't defective nor have they changed it.
According to the manual, it's not supposed to come out.
Excellent, just what I was searching for. Thank you Mrgunsngear. Last weapon I cleaned was my M16A1 during Joint Guard/Joint Endeavor.
Bullet loaded backwards in the thumbnail 👀
Thank you for making this tutorial.
I want a HK P30L but I also want a Beretta M9a3 in sniper gray g model. I only want 1 or the other but Wich one is the best. I really like both but I tend to lean towards the HK even though I love the Beretta. Decisions decisions.
Damn, we both dropped P30L videos within a 12 hour period.
jinx!
DevilDolphin Faith
Your video title is VERY misleading. Almost clickbait. SHOULD BE: "How to Clean & Lubricate Guns Made by the Finest Firearm Manufacturer Known to Mankind". Love your work. Love your tips and knowledge.
ha
big questions please help. I took apart my HK for the first time and dont have the silver cylinder on my barrel spring just the plastic smaller piece. its a hk p30 not the p30L. ive test it and it fires what i would consider good, should i be worried?
Great video well presented. Thank you very helpful.
Great Vid Interesting how u pull Slide Release all the way out too each is own On my 40 I grab from L side just pop out slightly and good to go leaving it sandwiched Seems through time you will wear scratch Marks from swinging R leg out on the outer slide And wear pin & notch Also Noticed your little metal squirter In time running that metal to metal will wear scratches possibly? kind off like Using a Metal fork in a metal bowl scrambling eggs you will get metal in your food Not a big deal just an observation? I like using Pinky it does look handy for the spring wich never do but may start after every say 5th Clean? On the Slide Rails I like to put couple drops Mpro7 up by front sight leand up and let it run down towards rear on its own then clean barrel come back wipe the butt . Also using Pinky tap the body rail ears as well and Slap it back togather🤙🏼
Love the reference to the hk catalog cover goof up way back
The slide lock on the p30 is not intended to be removed. It pulls out just enough to allow the slide to be removed.
What gstea1 said. It's early 2019 when I bought mine. The slide stop on mine does NOT come off. You just push it out enough so that it clears the slide and you can see the red indicator on the lever. Then you can pull the slide off the pistol.
R C
If you don’t mind me asking, how much did you have to give for it?
buying one sunday cant wait to get it thanks for the video
Great video! very educational and lean. thumbs up.
Great instructions, thanks. I was a bit uncomfortable where to start on the P30
Timeless information!
new follower... love these videos!!!
I literally just bought a p30 last night. Wanted a vp9 but the p30 was super cheap and I have wanted one for years.
It was cheaper than the VP9??? Was it used?
dexm2010 yes it was used but it would pass for new and it was hundreds less than a VP9 with extra mags. People are trading them in for VP9s I was told, so they had several. Best deal on a gun I have ever got.
nice
i thought the slide catch was captured...its not supposed to come off
Plus 1. Why take it off?
UCprepperNJ My P30 is captive. I don't see how to take it out. But I don't have the L model. Mine is the normal slide length. So maybe their different?
And they're too :) auto correct
UCprepperNJ Me to???
i have the L and its captive...got mine back in 2009
mrgunsngear! latex gloves really help, and they are cheap from harbor freight!
Quick question please should I use a new tooth brush every cleaning or around how many times would you recommend using the same one if so, I clean the brush with a paper towel pretty good. Thank you
Thanks brother.
I love my P30L with compensator and extended Jarvis Customs barrel John Wick style
awesome tutorial even though I don't own one might have to rent one this weekend.
I just got a new p30, should I clean and lube it before firing it?
If I have a H&K USP, it should be pretty much the same cleaning process right? Your videos are awesome.
Much appreciated bud! 🤙🏿
enjoyed your video but I do have a question...how do you remove the guide rod spring from the guide rod?
Good news, VP9SK is coming!!!
Does taking the take down pin all the way out damage it??? I read it can and others say it's no biggie.
My P30L 9mm does not have same recoil reduction system ?
Doesn't HK recommend only using Unicorn tears to clean and lube their pistols? :)
Close. Unicorn tears with Viper semen. 2:1 ratio. Don't ask me how you are supposed to milk a viper for that.
Lmao
no reason to fully remove the takedown lever IMO
What would you guys say are the benefits or disadvantages when compared to the Long Barrel Version.
MrGunsngear do you think in the future you will do a review of the REX Zero 1 9mm pistol (either the full sized one, or the compact one?)
I think you don't have to take off the slide release to dissemble
Great video man. Thanks for all the details. Just went through my first 200 rounds with the p30L and love it! Your video really helped me break it down and clean it for the first time..... He's a dumb question... Do you put anything on the outside of the gun? Meaning do you ever put like like a coat of oil or something to keep the finish on the outside nice?
I have just started using G96 and it a) seems to burn off more slowly, referring to an AR BCG, b) is less irritating. My skin hates me and everything else but G96 is gtg.
interesting
Hi! What do u recommend for cleaning the outside of the slide??? Thanks awesome video!!!!!
Thanks for the video. I'm getting a brand new one in a few days. Any advice on cleaning before its first range trip?
Nice video!
Thanks.
I assume the SK version is the same?
The slide lock is captive you dont have to remove it fully when taking it down.
Do you have any “special care” recommendations for the HK P30 barrel? Should I solely stick to only running patches through the barrel?
no as I don't shoot lead bullets through mine
Mrgunsngear Channel So I would be safe to use nylon/brass bore brushes through the barrel?
Saw this vid and thought I would ask you if you know of anyone who might know where I can source an HK V1Lite LEM trigger kit for a USPc 9mm I bought in 2000. I have searched and cannot find anyone who has one. Your help would be most appreciated. Really like what you do. Keep up the good fight.
Is this also for Usp compact? Thanks
Gracias, el video me fue muy util
This video had a lot of useful information . Too Bad its for the P30L. I have a P30 and the slide lock mechanism to take the slide off is totally different from the P30L
It's not. They are identical. Neither one needs to have the slide lock removed. It's also a bad idea to oil internal springs that you can't get to. Oil attracts dirt. In fact you don't even need to oil the RSA, just wipe it clean and DRY it off before re-assembly.
do this for a 320? seems like it's going to just get more popular with the army contract.
great video man, keep em coming
The gun of John Wick--cool!
Honestly I thought that the US military switched to g96 clp specifically because break free ended up being crap. Please correct if wrong
The military changed the specifications from D to E, with new requirements. Breakfree no longer meets the specifications. I am not sure if they tried and failed to meet the specifications, or just gave up. At any rate, Breakfree is not an approved lube and G96 synthetic CLP is.
will you do a review of the Kriss Vector and clean and lube .
That recoil spring assembly is nuts. Is it a substantial improvement over other captured designs? Reason I ask is other than fit and finish of H&K guns, i'm always curious as to what r&d might cause the increase in pricing.
Chris Bartocci has an indepth view of the H&K pistols like the USP that has information pertaining to the recoil assembley. Check out his channel.
Joseph Decker the recoil assembly is a milled piece, the slide has more milling, it's a hammer fired gun, has interchangeable back and side panels, and comes with metal sights.
Awesome video!
Hey, I'm looking to put Talon Grips on my Walther PPQ, with which you supposedly shouldn't use CLP. Do you have any suggestions for alternatives?
AcoraZ3RO ballistol
really helpful, thanks
BEAUTIFUL BRO...
I APPRECIATE IT
Thank you
@@Mrgunsngear INDEED... IM BREAK MINES DOWN SOMETIME TOMORROW
Thanks alot!
Thanks help get my p30sk Cleaned
you're welcome
Would you do a cleaning video for the VP9?
hopefully if I get my hands on one
I like BF CLP, but nothing using it as a lubricant ever feels very smooth.
agreed
I wonder if any of the P30 parts are interchangeable with my VP9?
The magazines are
head over to hkparts the vast majority of the commonly upgraded/replaced internals are the same part number and listed as interchangable. and every part on that site says what firearm its usable on.,
Great high visibility sights, what are they?
Appreciate it Joe...
can you do one of these for the Desert Eagle. i know there are others out there, but i'd like to see your take. thanks. good video.
I don't have one currently
How often do you recommend cleaning?
Every time u shoot
Nice. Using my clp body spray lol.
That's what she said!! like... to the whole video, yep damn near everything ha
Do you have a review of this gun up?
Not yet
Is that the LEM trigger version?
no