How to Cut Left Hand 60° Threads by the Use of Lathe Machine (External)
HTML-код
- Опубликовано: 9 сен 2024
- In this video we will be learning about:
- How to distinguish a left hand 60° thread from fight hand 60° thread.
- Major set ups for left hand thread toolbit used for left hand 60° thread.
Link for:
Setting Up the Lathe for Cutting 60 degrees Threads
• Setting Up the Lathe f...
Commonly Used Shapes of Tool bits and Their Uses
• Commonly Used Shapes o...
Setting Up the Lathe for Cutting 60 degrees Threads
• Setting Up the Lathe f...
For any suggestions please comment down below 😊
Don't forget to support me by clicking the like and subscribe buttons.
And don't forget to share! 😁
#lathe
#lathe_machine
#threading
#threadingtutorial
#threading_operation
Clear and Concise, I appreciate how it gets straight to the point without unnecessary fluff.
Thanks for the positive comments.
The video is super organized! It takes you step by step through everything in a clear and easy-to-follow way.
Glad to hear that! Thank you!
This shows how prof johnnny breaks convention as he threads from the left side and not the right.This shows exceptional machining skills and expertise
So glad to hear that! Thank you!
Thank you, Prof. Johnny, for such a detailed tutorial! Your guidance really makes tackling projects like this much more manageable 💗
You're very welcome!
I appreciate your clear explanations in the lathe machine videos, Prof. Johnny. Looking forward to more insightful tutorials!
Glad to hear that
Thank you very much!
Mahusay Prof Johnny! Pinamalas mo nanaman ang iyong kaalaman at expertise dito. Salamat sa mga tutorial mo at patuloy mo lang po ito salamat po!
Thanks to hear that, Gian.
Thank you so much Prof Johnny for this tutorial video!
You're very welcome!
This video is informative for me. It’s new knowledge for me about threading because you thread the workpiece from left to right! Very detailed explanation!
Good to know! Thank you!
the tutorial is very insightful and helps me understand the process clearly
Glad to hear that. Many thanks.
detailed explanation about cutting left hand 60 deg thread. the feed movement from left to right is fascinating because the usual feed movement showed in other videos are froom right to left.
You got it! Thank you.
Having this video makes me more knowledgeable. Thank you so much Sir!!
So nice of you
Great video Sir, madami ang makakapulot ng aral sa bawat video mo po.
Glad to hear that
Thank you.
As always... Perfect explanation. Thanks teacher.😀
No, thank you! What keeps this channel going is the time and effort you put into learning from it! It is because of you, as one of my students, that I continue to fulfill the position of teacher, so thank you!
I was able to understand the difference of this process to the right hand process. Thank you for this video po💓
You’re welcome 😊
In this video I understand it and easy to follow it step by step
Glad to hear that. Thanks.
This tutorial video is helpful. I was able to learn set ups for left hand thread tool bit and the step by step procedure
Glad it helped! Thank you!
This video is helps me alot because it's explain very detailed and also perfect explanation from prof johnny and give me more knowledge about threading the threads start to left to right
Glad to hear that! Thank you.
Thankyou for this video tutorial, Prof Johnny. It is a new knowledge for me that I will apply to myself when the time comes that I will actual on it.
You are very welcome
CENTENO BSME1C
Highly informative, and great visual guide. Great source lopit. GREAT JOB PROF JOHNNY
Glad you liked it!
Thank you for this very informative video Prof Johnny. What a nice!!
My pleasure! Thank you too.
Well said, prof jhonny!!!
Thank you, Adrian.
Very informative video, Sir.
This video is good. thanks prof johnny!
Thank you too!
Thank you again prof johhny. Mabuhay po kayo!
Thank you so much sir for this tutorial
You're very welcome!
it was smart to color the outer diameter of the thread ,makes it alot easier to see
Thank you for your encouraging remarks Matias. God bless!
Nice video!
Thanks for the visit
Very informative! Iba talaga ang passion ni prof pag dating sa machining.. prof johnny baka pede naman tutorial for gear hobbing 😁
Sir ako yung kausap sa cp kanina nag inquire about LATHE MACHINE TRNG..
Prof Johnny gawa ka naman ng double threads
Sure Revilo, may be next week. thank you for watching and subscribing. God bless!
How to set 29 degrees of compound rest? Like when we use a degree set compound rest for taper cutting? Plz advice 🙏
Nice explaination prof...
Thank you MC JEMZ for such an encouraging remarks! Thank you also for subscribing. God Bless!
Pa shot out sir..from shell
Hi sir. Saan po ang assesment and training center nyo s pinas. Salamat po
Ho skylargray! Dito lang sa GOODWILL TRAINING AND ASSESSMENT CENTER INC. Blk 48 Lot 14 Justice St., Goodwill Homes 1 San Bartolome, Novaliches Quezon City. Thank for watching and subscribing. God Bless!
CAN WE CUT THE THREAD WITHOUT MAKING A GROOVE ON THE LEFT SIDE??
Hi Zlomo,
Yes, you can perform threading operation even without a groove on the left side of the workpiece. You just need to cut the thread with one starting point only in order to obtain the required length of thread with good quality and appearance. Thank you for watching and subscribing. God bless!
@@profjohnny8624 so basically we'll have to manually adjust the toolpost while thread cutting continuously on automatic?? If you didn't understand my question then please will you post a video about this matter?? Because i always cut threads from the right side and if its left handed thread then i cut the thread like shown in this video with a groove but I've always wondered how to cut thread without a groove??
@@profjohnny8624 I meant if i put it on automatic from the left then will i have to adjust the depth while the toolpost is moving from left to right if i don't have the groove??
Sir ano po ang sira kapag hindi po maadjust ang speed ng lathe nka low speed lang po kasi palagi salamat po sna matulongan nyu q
Hi Kath, kelangan mabuksan ang headstock upang makita ang dahilan ng stock up ng swifting lever ng high and low speed. Maaring may nabaluktot sa loob kaya hindi magalaw o kaya naman ay may naputol kung kaya ay hindi nalilipat ang gear sa iba nyang mating gear. Thanks for watching at balikan mo lang ako kung may katanungan ka pa.
pano po mag enroll dyan sir?
Wow that looks like sht. That 29.5 degree is bs just square up your tool is. Square and use your cross slide way less is complicated
Sir jhonny penge po contact num
09166580548