I just received a Dc5 version 1.2 and have the template for version 1.1. I went to your site as suggested and can not find an updated “downloadable” template anywhere.
@@stephanbijl8628 I fixed it by cutting out a piece of paper the size of the template, putting it over the screwholes in the DC5 and puncture the holes through the paper with a pencil. Then i taped the paper on the original template to make it more firm and drilled the holes in the board. Easy fix. Good luck!
The 1.1 template fits the 1.2 dc5 screw holes. At least mine does. Punch through the holes of the 1.1 template and place it over the 1.2 to see if they line up.
I have de DC7 and I'm pretty happy with it. But I wonder whether it would fit in a nano+ the way the DC5 does. I hope it does, can you please confirm? Very useful videos by the way. Thanks!
Two questions: 1) Why do you supply 2 screws when there are 4 holes? I can't believe the damn screw is that expensive to supply 4 of them. 2) Where I can find this drill guides? There's no link on the official page, and google gives a link to 404 page.
You'll only need 2 screws. If you use 4 of them, two of them will be to close to the edge of the board. He explains it at 2:40. I dont' know why he then procedes to place the screw so close to the edge. Slightly misleading. There is no 1.2 drill template, the 1.1 works fine for the 1.2 unit. Punch through the template holes and place the template over the unit and you'll most likely see that they lineup with the screw holes. I'm just answering to your comment because i was asking myself exactly the same questions.
Great video! But I can not find the drill templates/guides on the website? Where can I find them?
Thanks very much, this is a great help, worked perfectly
I just received a Dc5 version 1.2 and have the template for version 1.1. I went to your site as suggested and can not find an updated “downloadable” template anywhere.
Yep, same here. I google searched for it and leads to a 404 page.
Same here!!
i am having this issue at this very moment
@@stephanbijl8628 I fixed it by cutting out a piece of paper the size of the template, putting it over the screwholes in the DC5 and puncture the holes through the paper with a pencil. Then i taped the paper on the original template to make it more firm and drilled the holes in the board. Easy fix. Good luck!
The 1.1 template fits the 1.2 dc5 screw holes. At least mine does. Punch through the holes of the 1.1 template and place it over the 1.2 to see if they line up.
The template is not available to download and your support does not respond
I have de DC7 and I'm pretty happy with it. But I wonder whether it would fit in a nano+ the way the DC5 does. I hope it does, can you please confirm? Very useful videos by the way.
Thanks!
Did you get your answer? I wanna do the same.
@@bshilkitus I didn't get any answer, but still bought the Nano+ taking my chances. DC7 fits like a charm, luckily. Go for it!
Hi CIOKS. May I know what screw size you used to mount the Schizophrenic? Thanks
have you got the same sheet for shizophrenic one?
Does it fit a daddario xpnd1?
Two questions:
1) Why do you supply 2 screws when there are 4 holes? I can't believe the damn screw is that expensive to supply 4 of them.
2) Where I can find this drill guides? There's no link on the official page, and google gives a link to 404 page.
You'll only need 2 screws. If you use 4 of them, two of them will be to close to the edge of the board. He explains it at 2:40. I dont' know why he then procedes to place the screw so close to the edge. Slightly misleading.
There is no 1.2 drill template, the 1.1 works fine for the 1.2 unit. Punch through the template holes and place the template over the unit and you'll most likely see that they lineup with the screw holes.
I'm just answering to your comment because i was asking myself exactly the same questions.
there is no download for the dc5 version 1.2 drill template. And you are not responding on posts here about it
will it fit under my pedaltrain mini?
I have been told that it will. Mine will be arriving soon and I'll let you know.
Why didn't they supply flat screws..... Common Sense
Here's a no comment unboxing: ruclips.net/video/VtBGU6Vg-uo/видео.html
Bullshit! The diagram is nowhere to be found on the website and support doesn't respond. Terrible customer service
Would a dc7 fit?