How To Measure AC Voltages Using ZMPT101B | AC Digital Volt Meter Using Arduino | PT

𝗭𝗠𝗣𝗧𝟭𝟬𝟭𝗕 is a voltage transformer used to measure AC voltage. You can measure AC voltages up to 250 volts by using this module. The output of this sensor is analog. if you change the input voltage, the output voltage will change as well.
🔴 Measure up to 250V AC accurately
🔴 Onboard micro-precision voltage transformer
🔴 Analog output corresponding quantity can be adjusted.
🔴 Good consistency, for voltage and power measurement
🔴 Very efficient and accuracy
=====================================
𝗟𝗮𝘁𝗲𝘀𝘁 𝗖𝗼𝗼𝗹 𝗣𝗿𝗼𝗷𝗲𝗰𝘁𝘀 𝗥𝗲𝗰𝗼𝗺𝗺𝗲𝗻𝗱𝗲𝗱
--------------------------------------------------------------------------
Smart Energy Meter Project Using Arduino
▶️ • Smart Energy Meter Pro...
-------------------------------------------------------------------------
𝗗𝗼𝘄𝗻𝗹𝗼𝗮𝗱 𝗛𝗲𝗿𝗲
----------------------------
Arduino Code ▶️ mega.nz/file/N...
--------------------------------------------------------------------------
𝗖𝗢𝗡𝗧𝗔𝗖𝗧 𝗜𝗡𝗙𝗢
Mail Us: 👉 [e-mail]
Instagram 👉 / the_electro_mentor
#ACVOLTMETER
#ARDUINO
#PT

[@mohdasim1028]

Very nice video
👍👌🧠
Sar VFD de ke bare mein jarur bataen

[@ElectroMentor]

Inshallah will cover VFD practically soon by the way simulation already uploaded there.

[@mohdasim1028]

@@ElectroMentor sar aapke channel per hai

[@ElectroMentor]

G

[@YILLTRONICS]

Excelente

[@ateebhassan4655]

Hello, thanks for this tutorial. I am curious to know that how can we use ZMPT101B in proteus for voltage measurement?

[@ElectroMentor]

I think there is no such as proteus library available so far about zmpt101b we need to construct our own circuit or we can build our own library about zmpt101b to find out AC/DC hight voltages ,by the way simulation based 4 videos are there on my channel i covered how to measure ac dc voltages you can check out there if needed.

[@ateebhassan4655]

@@ElectroMentor Thanks, I’ll go through them and will consult you in case of any difficulty. Thanks again.

[@ElectroMentor]

Sure you can approach me if needed 🙂

[@preetheshkumar227]

There have 4 terminal at output 1for vcc, middle for analog output ,other two gnd ,what is the analog output voltage max given by this board for audrino board.

[@ElectroMentor]

analog output voltage max given by the this board(zmpt101b) would be 5v for arduino

[@preetheshkumar227]

Sir if I use it for plc I need max analog output for 10V, so is it possible to increase vcc from 5V to 10V

[@ElectroMentor]

U can use step up transformer that would increase 5v to 10v or any other devices that follow linear voltages mean change in input effect on output also , 2nd option could be opp am amplifier LM385

[@ateebhassan4655]

Have you made tutorial on interfacing GSM module with Arduino on proteus to send sms in case of any condition? If yes, can you give me the link of that video. If no, then can you make a tutorial on that? I’ll be thankful to you.

[@ElectroMentor]

Inshallah will be uploading in 2 or 3 days here i have in my mind gsm module interfacing

[@ateebhassan4655]

@@ElectroMentor alright, waiting for it. Thanks

[@ateebhassan4655]

@@ElectroMentor can we send sms to GSM module in proteus? I am working on project and I want to turn the load on through GSM. For example, GSM will send SMS to user that (do you want to turn the fan?) and then user reply with "YES" to GSM module and then Arduino will read that message and turns the load on. Can we do that in proteus?

[@shankarnaik6418]

We are giving 230V input but output is not coming 5V.
How should we use potential meter?

[@lenslens7379]

I need to set calibration value every time
Or it's non volatile??
Thanks

[@ElectroMentor]

Please check operating voltages (vcc,gnd )of zmpt101b may be they are fluctuating you need stable operating voltages to get stable value try voltage regulator lm7805 or capacitor at vcc of zmpt

[@pgnetwork7445]

My lcd is showing onky 2.51 V
While it should be high

[@saffronthunder8853]

Bhaijaan i have mailed regarding aurduino smart traffic light project response dijiye us mail kaa us video ko like comment or share bhi kar diya hai

[@npslucknow9235]

can i measure 350V ac sir ?

[@skgaming914]

Please send the code

[@ajaylobo125]

Voltage kaisey calibration karey ?

[@ElectroMentor]

Using DMM

[@eeesolutionrakib3619]

bro can u give me code here ?? from the descripton i am trying to download this code , but i am failed , please can you give me code here i will pleased to you

[@ElectroMentor]

reach out mail box will forward to you : [e-mail]

[@hamzaalisyed1463]

Hello sir kindly share the code here I m failed to open code I m very pleased to you

[@shreyaskulkarni6910]

Can I use this for max 300V

[@ElectroMentor]

Yup i used to go for upto 600V

[@ambersatsangi8169]

Program?

[@ElectroMentor]

Dear Arduino program download link is available in description check out description please 🙂

[@dreamstudiodslr5139]

Bhi over under voltage protection bnaly

[@ElectroMentor]

Okay bhot juld upload kron ga

[@Gallardo6669]

Thumbs down: English title expect english language

[@ElectroMentor]

I selected native language , so why RUclips recommend to you not my fault 🙂

[@timgads1712]

@@ElectroMentor You made up an english language title.