Great how to video. Looks easy enough and the price for these is way better than the Polaris product. Tusk products are great. Will definitely add these to my 22” G4.
@@mxracer317 get them and take your time they’re pretty good and the fit isn’t quite perfect in some spots but it’s way better than not having. Been out a couple times with my kids and I’ve had to roll the window part down cause it got hot then I had to remove my front windshield cause it got super hot. I did the front after work and the rears after work the following day. Mounting them was quick getting the doors adjusted and the latch and I had to bend the frames of the uppers slightly in towards the cab to get it to seal up against the roll cage that took some time I wanna say I spent 3-4 hrs adjusting the front two and the same for the rear but I really tried to get them to fit as best as possible. When I get off of work today I can try and post a vid of how they came out for me if I remember lol
I have spent two days attempting to get these doors to fit on my 2022 General XP 4 1000. The issue is that the back door panel is not wide enough to reach to the center post and create a seal. I have attempted, with three other individuals to come up with a solution. So far we have not been able to fix the problem. When you watch the installation video from Rocky Mtn, the rear door panel is almost touching the front door panel on the center post. My rear panel will not even reach to the center post. I have measured the opening and it is wider than the panel by at least 3/8". I read in the instructions that it might be necessary to adjust the door position by loosening the door hinges. This brought me virtually no closer, due to hitting the door latch. From what I see, these rear panels are defective, they need to be at least 3/4" wider that what they are to be able to seal on the center post. I sent Rocky Mtn pics and explanations in an email on 3/15/23. So far no one has contacted me. I was told I would receive an email within two days. Not really sure how an email is going to address my concerns. Speaking with a technician who has installed these would be a good place to start. Monday might be box up and return day. Then I can try and figure out how to plug the holes.
Hello, sorry to hear about your frustration. Do you have the email you messaged? Have you filled out this form? www.rockymountainatvmc.com/Product-Support We want to get you taken care so please respond back and we'll help get this worked out. Thank you.
Hopefully this video helps but if you're still having trouble please email us some pictures to tech@rockymountainatv.com and we'd be happy to see what's going on.
I don’t understand why these won’t fit on a 2017 general 4 seater. When I open up my door panels everything looks identical except for mine has latch rods and not cable, I don’t believe the rods would be an issue though. Has anyone attempted to install these on a 2017?
I have a set I'm putting on my polaris general 1000 4 seater and passenger side drilll template x is way off to one side is it supposed to be like that cause I think when I drill with 1/2" drill bit it will cut through through edge of door
![Polaris General Canvas Upper Doors Review || Soft UTV Doors [Polaris General 4 1000 Side by Side]](http://i.ytimg.com/vi/vKOOOTmEcBM/mqdefault.jpg)
![Polaris General Canvas Upper Doors Review || Soft UTV Doors [Polaris General 4 1000 Side by Side]](/img/tr.png)
Great how to video. Looks easy enough and the price for these is way better than the Polaris product. Tusk products are great. Will definitely add these to my 22” G4.
This channel should get more views. Great job!
Thanks, I'm glad it's helpful! -Charles
Hopefully mine goes this smooth and look that great! They’re getting delivered today
How long did the install take you? I’m looking at picking some up ASAP
@@mxracer317 get them and take your time they’re pretty good and the fit isn’t quite perfect in some spots but it’s way better than not having. Been out a couple times with my kids and I’ve had to roll the window part down cause it got hot then I had to remove my front windshield cause it got super hot. I did the front after work and the rears after work the following day. Mounting them was quick getting the doors adjusted and the latch and I had to bend the frames of the uppers slightly in towards the cab to get it to seal up against the roll cage that took some time I wanna say I spent 3-4 hrs adjusting the front two and the same for the rear but I really tried to get them to fit as best as possible. When I get off of work today I can try and post a vid of how they came out for me if I remember lol
@@brandon22333 Right on. Thanks!
I have spent two days attempting to get these doors to fit on my 2022 General XP 4 1000. The issue is that the back door panel is not wide enough to reach to the center post and create a seal. I have attempted, with three other individuals to come up with a solution. So far we have not been able to fix the problem. When you watch the installation video from Rocky Mtn, the rear door panel is almost touching the front door panel on the center post. My rear panel will not even reach to the center post. I have measured the opening and it is wider than the panel by at least 3/8". I read in the instructions that it might be necessary to adjust the door position by loosening the door hinges. This brought me virtually no closer, due to hitting the door latch. From what I see, these rear panels are defective, they need to be at least 3/4" wider that what they are to be able to seal on the center post. I sent Rocky Mtn pics and explanations in an email on 3/15/23. So far no one has contacted me. I was told I would receive an email within two days. Not really sure how an email is going to address my concerns. Speaking with a technician who has installed these would be a good place to start. Monday might be box up and return day. Then I can try and figure out how to plug the holes.
Hello, sorry to hear about your frustration. Do you have the email you messaged? Have you filled out this form? www.rockymountainatvmc.com/Product-Support
We want to get you taken care so please respond back and we'll help get this worked out. Thank you.
Can’t wait to get mine installed , what phone mount
Is that ???
Will these fit a 2017 General with the recall doors? Is there much modifications you need to do to get them mounted?
Any ideas
Can you please do a video on the Polaris sportsman 110
I'm not sure if we'll do one on that. Do you need help with accessories or what information are you looking for? -Charles
Bought these but I’m having an issue with it not fitting in the front massive gaps
Hopefully this video helps but if you're still having trouble please email us some pictures to tech@rockymountainatv.com and we'd be happy to see what's going on.
Anyone know why there are not compatible with the 2017 1000 four seater ?
I don’t understand why these won’t fit on a 2017 general 4 seater. When I open up my door panels everything looks identical except for mine has latch rods and not cable, I don’t believe the rods would be an issue though. Has anyone attempted to install these on a 2017?
I have a set I'm putting on my polaris general 1000 4 seater and passenger side drilll template x is way off to one side is it supposed to be like that cause I think when I drill with 1/2" drill bit it will cut through through edge of door