Looking good. Large difference between the 30's and the 30's, haha. Should do a weight comparison between the two different setups. Would be interesting to see the difference.
The tires look good. I came out and rode with you boys in the summer I had the other Can am 1000. ITP KFI ride. now that you have some use out of those tires, how do you like them ? I was looking at getting these as I'm just running silverbacks at the moment. thanks take care. thanks again for the ride it was a blast!
when putting wheels on I just use my smaller impact and give it two uggaduggas, only has a max of 50ftlbs with a good clean bolt and thread so it should be close to 40 haha. Only thing i do that for, definitely will not have the same process for my truck.
You should throw the factory take offs from the XMR on the Brute, I believe they are the same bolt pattern. Also the new rims look great!! no need for sunburst yellow, black looks bad ass
When ever mounting a tire on a rim, start with the side of the rim closest to the inner valley. That way you don't have to stretch the tire to get it on. You used the wrong side of the rim and struggled to get the tire on. Makes work much easier too.
Power modz I need your help I just got a set 27 10 14 cryptids I'm no armature at mounting tries but I can not mount these for the life of me tire has no flex non bead lock. Any tips??
Dylan Doss the 30x10x14 how are they did you loose a lot of power and do they rub? I'm also intrested in buying those tires but I'm in between the 9 inch wides or 10s
I couldn't tell a change but i also have a programmed hmf. As far as rubbing goes they do with out a lift kit. i have 1.5 inch spring spacers and trimed some and i still rub at a full turn.
They fit on a stock bike no lift or spacers ? I'm looking into these interco boggers www.intercotire.com/tire/500 27-10-14 for a stock outlander max xt 650 2020, do you think it will fit knowing stock tires are 26-8-14 itp terra-cross?
Right on, sweet rims
Love them Rims.
Looks great Louis! Love the all black beadlocks. Those 30x10 is what the XMR should have came with.
XMARGH no they come with 30x9x14...measure in at 29.1
I know that Louis, that's why I said "should have came with" ;)
Looks good great video guys 🤯
Awesome show buddy 👊😆
Thanks for the visit
You need a set of plastic coated (rim saver) sockets for taking off and putting rims back on. Very handy, no marring.
Looking good. Large difference between the 30's and the 30's, haha. Should do a weight comparison between the two different setups. Would be interesting to see the difference.
NOS Atvs 1 inch! ill check the weights. much larger footprint though...tryung tomorrow! head this way on the weekend to cristen the new trails
The 30x10x14 weight
43.8 and the 30X9X14 42.2 it's a 1.6 lbs diffence per tire
Love it PowerModZ
Looks good bud!
Nice unit👍🔥🔥
The tires look good. I came out and rode with you boys in the summer I had the other Can am 1000. ITP KFI ride. now that you have some use out of those tires, how do you like them ? I was looking at getting these as I'm just running silverbacks at the moment. thanks take care. thanks again for the ride it was a blast!
Been following along, mentioned a clutch and belt upgrade but I can’t seem to find that video.
when putting wheels on I just use my smaller impact and give it two uggaduggas, only has a max of 50ftlbs with a good clean bolt and thread so it should be close to 40 haha. Only thing i do that for, definitely will not have the same process for my truck.
You should throw the factory take offs from the XMR on the Brute, I believe they are the same bolt pattern. Also the new rims look great!! no need for sunburst yellow, black looks bad ass
naw they are a different pattern unfortunately...but we still might change things up!
holy shit 30inches wide omg 0:40
I now right! lol
I have the same wheels, I love them but they are expensive. Probably overkill but you can run a tire even if its completely flat.
Bad 2 Tha Bone! 🍻
Essas rodas são lindas! Estou doido para ver elas montadas com meus pneus Malibu
Just picked up a new to me 2017 can am xmr 1000r with the ITP cryptid's. What tire pressure would you recommend on stock rims?
When ever mounting a tire on a rim, start with the side of the rim closest to the inner valley. That way you don't have to stretch the tire to get it on. You used the wrong side of the rim and struggled to get the tire on. Makes work much easier too.
U noticed
Power modz I need your help I just got a set 27 10 14 cryptids I'm no armature at mounting tries but I can not mount these for the life of me tire has no flex non bead lock. Any tips??
what is the bolt pattern on the XMR when ordering the ITP wheels
did u rezolv the issue whit the wiggle in tha handlebar ??? please tell me how ?
Quick question do you have to do clutch work on the tires on my 85Xt outlander
Did you ever sell the stock rims and tires
how wide are the front and rear rims?
What TIRES ARE YOU RECOMENDING IF YOU RIDE IT IN THE STREET?
What skid plates you running? It looks like they come up around the foot rest and would stop that front piece from cracking
Twisted Axles they are rival skid plates we sell them let me know if interested. they offer great protection.
Is that a snorkelyouratv kit ?
What's the offset on those bead lock wheels? Are they 14x8 wheels with a 4x4 offset?
I have the same tires on my 650 and they are amazing
Dylan Doss the 30x10x14 how are they did you loose a lot of power and do they rub? I'm also intrested in buying those tires but I'm in between the 9 inch wides or 10s
I couldn't tell a change but i also have a programmed hmf. As far as rubbing goes they do with out a lift kit. i have 1.5 inch spring spacers and trimed some and i still rub at a full turn.
Dylan Doss cool thanks for letting me know are you running 10 wides or 9s?
i opted for the 10 wide
@@dylandoss2157 i have the 850xmr and have the 10's ordered. Was hoping i didnt need a lift or spacers. Is your bike a xmr?
They fit on a stock bike no lift or spacers ? I'm looking into these interco boggers www.intercotire.com/tire/500 27-10-14 for a stock outlander max xt 650 2020, do you think it will fit knowing stock tires are 26-8-14 itp terra-cross?
Forget the torque wrench.....tighten down to three uga dugas with the impact driver😂
Looks like a serious and very large mud machine. It would be nice to see a running total $ for all these mods.
Robert DeMilo no no never add things up...very bad idea.
What’s the rim size
Looks good. What happen to the 860? Did she give you some mod sled karma
gentile joshsaved shes all ready to go...just need snow!
PowerModz
No shit you run them on snow.
I'd love to help you on all these projects even though you probably never need help.
i hope they are not 30 in wide.
How much is the price ?
Hey I’m getting a defender at the same dealer you got your XMR. If you still have those oem wheels and cryptid tires I would buy them off you
I have them! PM me. or contact me through my website - im in the Pembroke area all the time.
PowerModz youtu.be/addme/x8mx1xtUQaLDaq65iJhyMm6ct8YZxQ
Hey did you notice a big difference ?
yes for sure.
Have you got the mega mayhem’s on the brute yet?
Ryan Volk yes should be trying tomorrow
Had a set on my grizzly and loved em
Sell me the stock tires and rims that came with your Outlander
poor ITP XTR's reduced to jack stands. 😂
30/10 floot ridiculously I thought
Narrow 30 in. Width LMAO!
“Bike” 🤔
Cody Piscitelli yup atv quad wheeler bike fourwheeler
Yes google quad bike. Anything with handle bars and wheels.
J Lord Bike = 2 wheels. It’s literally the definition
@@digit975 "Quad..Bike"...
@@digit975 Google, Quad bike. It's a real definition
..if you do all 4 tires like this youre done..:- ()
30' inch wide????.....what!!!!....nice edit >>facepalm
Too much going on in my brain....
When are u gonna stop messing around and just get a set of terminators...
I’m not a fan of these tires not impressed at all with them on my 850
the 30x9 x 14 or 30x10x14?
30x9x14 I find they are too hard they don’t catch like a mud tire should
Is that a snorkelyouratv kit ?