Yes! You would have to put on backing plate, install impeller, set clearance then disassemble and start installing seal. For a closed face impeller clearance might need to be checked while removing pump for maintenance, or checked with casing for new installation.
É muito bom e facio quando temos em mãos o planejamentos da tarefa e as ferramentas corretas isso deixa com uma probabilidade de acerto do serviço e confiabilidade
I have to ask just because i do this for a living to we don't use oil because the pump is for drinking water or to water food we use soap but i was told it is so you don't role the seal and chance a leak because the seal will garb the shaft and role.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
Improper handling & installation process of mech'l seal. Where are the extra cares needed in handling, reassembling, & installation? -proper positioning to its proper location is quite unclear. - the way he projects & carried out the installation is way out of professional, journeyman way. The way he tightened the stuffing box cover, may cause uneven contact(tilt) on matting surface of stationary & rotating sealing face.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
I was working as Mechanical seals technician. HiFab Mechanical seals Bombay.
What are you doing now?
Sir, Servicing Cooling tower.
@@sudarshanbolar6761 woooooow ... So you started your own? Like service of all Industrial cooling tower?... Could you give me your mail ID?
sudarshan@himgiricooling.com
अच्छा कार्य है मै इस से भी आसान तरीका से असेंबल कर रहा हूं।
aap kaha se hai sir
mai bhi seal banata hu from mumbai
You work way to ruff with that seal!!! And where is your Grease?!
He said it was for demonstration purposes
@@ghostdog662 well...bad demonstration then.
Hello from Atlanta tx
Good job sir
What about impeller clearance doesn’t that need to be set before seal is installed and locked down?
Daniel Keller sunil
Yes needs before seal installation check impeller clearance and shaft run out check etc..
Yes! You would have to put on backing plate, install impeller, set clearance then disassemble and start installing seal. For a closed face impeller clearance might need to be checked while removing pump for maintenance, or checked with casing for new installation.
Yea but he doesn’t need to if he is just leaving the imp and ob case off for the sake of the video
Is this pump from Sumit
É muito bom e facio quando temos em mãos o planejamentos da tarefa e as ferramentas corretas isso deixa com uma probabilidade de acerto do serviço e confiabilidade
www.mechsealeng.com
Thank you for this video I want your opinion in this pump
The pump is the chemical process pump , ANSI B73.1M or others ?
Very informative.
waoo is the best job
Good idea
Uma forma prática
Parabéns obrigada¡!
If we apply tenson of sleeve can O ring change postion?
EL AJUSTE SIEMPRE EN CRUS POR QUE SINO DESBALANSEAS LA TAPA EL TOPE DEL SELLO TIENES QUE MEDIR EXACTO O TERMINARAS POR RONPER
I have to ask just because i do this for a living to we don't use oil because the pump is for drinking water or to water food we use soap but i was told it is so you don't role the seal and chance a leak because the seal will garb the shaft and role.
There is a chance to roll the o-ring in the seal while sliding it on the shaft or shaft sleeve, im guessing that is where you use soap.
You can use dishwashing liquid which will wash away.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
Gracias en planta tengo 4 bombas similares de mucha ayuda
Very nice sir
wow so very good more video
Mill write Fitter ho kya bhai
@@rajuthakur9437 mai seal banata hu
I like this job and I doing long know
Very interesting
Nice and help full
good video
Super sir
Please kindly your advice, what kind mechanical seal face which suit using heating oil? Operating temp. Is up to 210 celcius
Honggo Aditya we have solutions for high temperature sealing. contact me if you are still interested.
Tungsten carbide or ceramic. Stay away from carbon seal faces for high temps.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
What do you clean the carbon face with before installing?
Because any small martial part on face seal is leaking needs to clean face?
Crc lectra clean is very good.
펌프 와 모터 사이 연결 최소 연결 길면 요동 심함 고장 높임
사람 팔 길게 펴다 A
사람 팔 짧게 펴다 B
어느것 편안
Very nice
Thainks
Thanks for demo
Hey Peter, turn on channel nine...
Ha! Sounds just like it!
very nice
Mill write fitter ho kya
good video I like
Thank you Sir.Jay Hind.
thank you
How much is the loading . Free length and working length.
Please reply
Depends on the seals
Single spring?
Multi spring?
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
Excellent work
Mill write fitter hai kya aap
Kon si pump he
NICE
nice
si no regulaste y ubicaste el impulsor primero ,todo esta mal-
Vari information
"Installation process"? Why isn't it just an "installation"?
Please subscrib chanel
ruclips.net/channel/UCAV_AEWCJJVUSX41tstrY6Q
Love the video but you to ruff 😂😂🤦🏻♂️ Gaul Central
Boss pwede po ba akong makabili ng mechanical seal ng submersible pump
I asked for a quote my name ste Gardner l think i stated that the shaft size was 1/516 it should have said 1/15/16.sorry for the mistake.
خیلی خوب
Good
goodstuff
Like how he says oil
Still a dynamic seal!! Spring will get chloride stress corrosion!! Rubber bellows will fail due to movement.
Who said rubber bellows? And what’s the alternative to a “dynamic” mechanical seal?
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
thanks bhai
👌
Nyc
Fitter ho kya
amyzing
Improper handling & installation process of mech'l seal.
Where are the extra cares needed in handling, reassembling, & installation?
-proper positioning to its proper location is quite unclear.
- the way he projects & carried out the installation is way out of professional, journeyman way.
The way he tightened the stuffing box cover, may cause uneven contact(tilt) on matting surface of stationary & rotating sealing face.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
펌프 축 패킹 외부 에서 조립 용이 구조 일것
패킹 이 축 보다 먼저 마모 축이 마모 안 되게
그런제 축 마모 이 축 다시 가공
Please help me , I want to buy a house . So I want money.
Give me 1 lakh, i will give u 2 lakh
So simple
Mill write fitter ho kya
Do you need a bigger pump, take a look at our
simple
Confused
Pati bering
Hi
Plz explain Tamil
Pls Tamil la venum
Good night
Hi I want to buy mechanical seals how can I get it
@@jamesokechukwu9024 we r manufacturing mechanical seal from mumbai.
Tall me pls
Good
nice
👌
@@rajuthakur9437 yes
Kaha se hai
Mumbai
Salary kitni hai
20000