The problem with Epiphone no one tells you
HTML-код
- Опубликовано: 11 сен 2024
- Utkarsh Mohan on Music #13: Epiphone guitars have been on a roll lately. But there is a big problem that has plagued the brand for years, which is never talked about openly in the guitaring press. This is something Epiphone needs to fix if we want to remain competitive with the likes of PRS SE
RUclipsrs have am amazing quality of talking for many minutes and yet never moving any closer towards the point of the video
Great video. Its not just the fretwork, its the material they use for the frets. And yet ESP and Schecter are able to put stainless steel frets on their similairly priced models.
That's a very good point . Now that you mention it, the fret material does also feel cheaper
The idea that an Epiphone purchaser will wear the frets out with normal use is fundamentally bat crap cra cra. This is a case of elitists creating a problem for budget guitars that does not exist.
@@benburnett8109 You'd be surprised how much dedicated guitar players spend so much time woodshedding and wearing down frets. Some of them just have the one guitar that gets worn down.
@@gsauce132able In the movies yes. In real life, no. I"ve been in guitar repair for almost 35 years. Never had to do a fret job due to "worn" frets. AND none of this changes the fact that this YT poster is just here for clicks and drama. It is likely he can't even play a 1-4-5 progression.
@@benburnett8109 What "movies" have anyone wearing frets down? Are you on crack?
The root of the problem is...Epiphone is owned by Gibson.
💯
Exactly. Epi's are great, I have a few but they are Gibson authorized Chibsons.
This is why Gibson is raising Epi prices to make up for low Gibson sales. Epi's used to be more affordable but no more.
It's a push pull proposition.
That's not a problem. That is a good thing. Gibson ensures Epiphone's quality stays high for the buyers on budgets. Over the last 2 decades, Epiphone's quality has mirrored Gibson's strict design and manufacturing standards. Quality differences now are merely where they are manufactured along with some cosmetic manufacturing processes, weight, and lower cost electronics. The lower cost electronics now rival high cost competitors. I have a 300 dollar LP Studio that matches a Gibson 10 times higher in price in both visual quality and sound.
@@Gr8FriknApe We're talking about cost here. Epiphones have been made by numerous different Asian manufacturers over the years with varying results. I have a 2004 Epi LP Standard which I bought in 2006 because it was Korean made (in the Saein factory) and Epiphone had switched to being China made and in my opinion, far lower in quality (that has changed significantly). I wasn't really in the market for an LP at the time but felt if I was to get one I'd prefer the Korean made quality so bought it when it was available. I assume your LP Studio is an Epiphone. When the Gibson LP Studio premiered it was $600. What do they cost now??
Ten minutes for paraphrasing the fact, that Epiphones have "bad fretwork" and "bad switches", but I didn't understand what exactly is the problem with the frets (I have - among other guitars - an Epiphone LP for more than 20 years).
High frets, sharp edges. The finish work was not done properly.
Uneven and dead frets. He’s absolutely right. Most are hard work until a decent luthier gets hold of them. Then they’re great.
@@m00plank90 You're saying that you're incapable of doing a little work?
Epiphone fanboy is mad because someone dare speak facts about the shitty Chinese guitars.
@GenericUser833 the reason chinese guitars are shitty is because the money goes to the chinese communist party (ccp). Fuck a commie.
The quality can be amazing or shitty just like American guitars. Just watched a video about a chinese guitar that costs $2199. It looked kinda cheesy (dyed blue fretboard, bolt-on neck) but glen said the fit and finish was phenominal. Not for me though.
Like myself, most people are buying these guitars and upgrading them and still have a guitar that's way, way under what a gibson costs. Once you have learned to do fret work, these things can be awesome.
I've done that several times. It's an effective method to get a very close Gibson at half the cost, give or take.
Fully agree on the fret side. Takes me about 4 hours to remove all the sticky stuff from the fretboard and straighten and polish the frets. Depends on the material of the frets and wether any sticky stuff is ON the frets. Sometimes, it takes 3 or even 4 runs of full polish for them to stay shiny. What you can’t fix is the sticky paintjob.
As for the upgrading of the electrics: it’s only worth it if you keep that guitar forever. If you have to sell it at any point in time, KEEP THE ORIGINAL PARTS! For whatever reason, original is worth more than better. Don’t ask, people iz crazy
What’s the problem with the fretwork on epiphones? They don’t usually buzz. Maybe the ends are a little sharp. For me the epiphone finish is what I can’t get over. I absolutely hate an opaque 1/8” thick poly finish on guitars. Even the Gibson standards are way too thick, even though they’re nitro.
for the $$ they want these days theres ZERO excuse for the frets and setup to not be spot on- heck the 179 dollar baretta specials from indonesia come set up and fretwork very well done
@@Delboydunno for $500+ there shouldnr be sharp fre ends
I feel like with a lot of guitar brands recently it's been a roll of the dice as to whether the fret work will be decent. This is why when I find a guitar now that doesn't have fret buzz from uneven frets or sharp edged frets I make sure to keep hold of it because I'll know it's a keeper regardless of how much it cost.
I was very impressed with ESP especially when compared to epiphone. You’re definitely right about your experience and findings.
Schecter, too. Their Solo II IS is an outstanding take on the Les Paul. Comes equipped with excellent locking tuners, too. Ebony fretboard. Beautiful guitars. They feel just great in my hands, like a much more expensive guitar.
ESP is kinda owning Schecter so no wonder of their quality
Also, stainless steel frets…
@@spidgeb3292 I didn’t even know that they had that, I’ll need to take a look. I’m a big fan of ebony and the les Paul body style
I wont even compare Ltd with Epiphone. From my experience, esp is way above Gibson when it comes to many things. I would trade any day a lp standard over an e2 Eclipse.
It would be helpful if people mention where they bought their epiphone, what region, what manufacturing year, date of purchase, etc. Just to see if there’s been any patterns on where and when the problem epiphones are popping up.
I have a Korean Epi Les Paul and a Hamer Echotone Korean model 90s I guess. In both guitars, frets have come loose. I do live in the desert of Las Vegas though I do keep my house humidified in the winter.
I recently purchased an Epiphone Inspired by Gibson Firebird with a free Plek job from Sweetwater. It is awesome.
This x100. Get the PLEK done from Sweetwater. Made a world of difference on my Epi.
Every new guitar needs a set up. This video is a joke.
Sweetwater sets em up alright!
I got one of the Les Paul moderns from Sweetwater a couple of years ago and I still love it.
And "I" saved $200 on my car insurance!!!
the real problem is that it says, "Epiphone" on the headstock
I have two Epis, a 1990 Sheraton II and a budget Les Paul with a set neck, dot inlays and no binding -- some kind of Studio. Both were almost flawless. I did have to very gently file one note on one fret on the Sheraton. Otherwise, the fretwork and electronics are fine. Does Epiphone send their seconds to Singapore and reserve the better ones for the U.S. market? 😅
same here, acoustic and semi-hollow, both excellent in sound and finish
IMO it depends on when it was made. 90’s epiphones seem to hold up well. There’s a run from 2000-2015/17 where they only produced garbage. The quality has improved in recent years. I have not played a “bad” epiphone that was manufactured between 2018 and 2021.
You might laugh at the notion that Epiphone reserves the best stock for US, but I think that there is actually some truth in that for multiple brands. Can’t speak specifically to Epiphone but I have seen this happen with some brands, that save some of their best stock for either home markets or another market where they can charge a bit more of a premium.
Korean and Japanese made Epiphones are very good.
I had a 1985 Epiphone Sheraton, I miss it so much.
This is very quickly becoming one of my favourite guitar channels. You talk about important issues and it's clear that you're passionate about the subject matter but also give a very balanced overview of the topic. You're also a realist, and understand the reality of the guitar business - it's exhausting sometimes to hear people who either completely discount the need for budget instruments or the opposite, those who sneer at the idea that a brand or marketing can add any value to a product whatsoever. I was ready to chime in and say that it's not entirely fair to compare a Made in Japan ESP on discount to a full price Epiphone but you said everything yourself. (In saying that, it IS insane that those two instruments were even in the same ballpark and this is where I definitely lean towards the opinion that no brand name is going to add THAT much value, especially when ESP isn't exactly a no-name in the industry)
But yeah, you're 100% correct. Epiphone is 100% a pipeline to Gibson - if someone absolutely falls in love with their Epiphone then the logical step when it comes time for an upgrade is obvious. And it seems entirely logical that it's worth cutting a few percent off of the immediate profit in order for those instruments to feel great and be something that a beginner, working musician starting out or in a developing country can rely on. Otherwise they are looking at a future where less and less guitarists are growing up with Epiphone/Gibson as a brand they care about and not something they value and in 20 years the 'blues lawyers' of tomorrow aren't buying $50,000 Greenie reissues because they just don't care.
Anyway, great video. I'm excited when I see new uploads from you now.
Thank you. I really appreciate you watching and the kind words. This encourages me to put in the time to make these videos
Why buy a reasonably priced guitar with problems when you can save up and buy an expensive guitar with problems? 😂
You live in Japan and are not playing an Orvile old Ibanez Burny Tokai etc? I live in the USA and these guitars are superb
I tried a Burny LP and it was awsesome with low action and no buzz. Felt much better than the Gibson LP custom I had in the 90's .
Also Edwards.
You can take the boy out of corporate but you can't take the corporate out of the boy! The Jacket!
Yep, and when he mentioned he is in marketing and that almost justified the poor build quality, I knew where he was going. If you're willing to pay the _artist tax_ because of a philosophical belief in marketing then you deserve what you get. That's usually the first hurdle that players need to get over in order to get a good value for their money.
Disclaimer: I come from software development background so marketing generally ruins _most_ things for me.
His mistake is going with a white tee.
forgive him, he's just Indian😎
@@yargnad Unfortunately, our entire world is run by marketing now. It's basically the world you see in Wall-E. That was the only thing Gibson improved.
In trogly's unboxing of the 58 Flying V he discovered that the frets were magnetic. MAGNETIC??? How!? What are they using? Steel?
I actually love the sound of stainless steel frets, a lot of import guitars have been using them I think.
There is such a thing as magnetic stainless.
Most frets are magnetic, give it a try.
i dont know if i've just been lucky but i havent had these issues you mentioned with any of the epiphones ive had or played. I should add i have 50+ guitars in my collection and 6 or 7 are epiphones. Of the newest i have 3 of the matt heafy models. My oldest epiphone is from the mid 90s, its still all stock and frets are still all working great. That was my main gigging guitar for 10 years. But for years ive heard these complaints so there must be something to it, ive just managed to dodge the bad ones somehow.
99% of the people out there do not experience the problems that these elitists complain about. This is simply click bait material designed for views and clicks. so this guy bought a 600.00 epiphone and wants it to have fretwork from a 3k guitar built in the Heavens. Click-bait. Drama. Trust me when I tell you this............there is nothing to this. THis is a hit piece of clickbait material designed to sell "higher quality" guitars.
I agree. I borrow guitars from my friend. She has Epiphone electric and acoustics that range from $699-$899 (she paid less with dealer discounts/promos). So far, there’s been no issues. They are immaculate in every way, and punch well above their class in terms of quality, playability, and tone. I would love stainless frets, but the nickel ones really aren’t having any issues so far (and she and I both tend to dig in deep and are not gentle in the slightest, lol). I don’t know why people dog Epiphone guitars themselves - the only legit complaint these days is the pricing that’s skyrocketing especially on artist models. That’s unacceptable for guitars that aren’t much different (if at all) than the ones that are $599-$999 depending on the model when Epiphone became a budget brand since Gibson took over the company decades ago. Artists can still get paid royalties sub $1000 and Gibson will still earn a healthy profit, as will dealers. There are still artist models under $1000, so there’s no excuse. Honestly, the best electric guitar value is the Epiphone Modern line - the LP Modern Figured is an insanely high quality guitar with all kinds of tone options and amazing playability for $699 street price. I’ve also heard great things about the Emily Wolfe Sheraton. The Slash J-45 is killer for an acoustic.
Same, I think people get off on bashing a brand and comparing one guitar to a top end and expectations should be the same!, I've had several Les Paul that needed work as well I had an ESP that had wiring problems! Yeah truly tired of these " non judgemental" comparison that turn into a passive aggressive tone
The thing is, you can pick any Epiphone / Gibson and compare that with whatever you get from another brand for the same price and you'll typically get either, if not all: better finishes, better paint jobs, better frets, better bridges, better tuners, better electronics. You name it.
@@chipcaronte thats not true. i currently have a prs which is fairly expensive and 3 epiphones in the same price range and the prs is the one with issues. i collect guitars and im a luthier and lemme tell ya, no brand is safe from issues. especially if you come at the guitar with a bias, youll find a problem.
I just bought a new Gold Top. So many frets were out I had to stone down the whole fret board. Now it is has a fantastic action and is a joy to play.
any guitar ya get needs your own refining to adjust it for your needs that's part of the charm and fun!
Yes, this is a dumb post with no point.
Reasonable, knowledgeable and polite. Great video!
Thank you. Appreciate it
My local music shops have told me PRS (including SE) have been top notch when delivered followed by foreign guitars like Yamaha, ESP, Ibanez, then Jackson Schecter and they said Epiphone has improved but Fender and Squire show up lose strings and not setup and one of the store’s I mentioned are big Fender strat/tele fans and are upset with the issues with Fender. One customer ordered straight from Fender shop and the guitar showed up not setup and needed neck adjustment, frets addressed. I don’t know how long term Epiphone electronics hold up now.
I go poop in the morning. You should go poop as well.
Fender has been turning out some sub par work over the last 2 to 3 even 4 yrs.. It goes like that.. up and down.. (some are getting a little better lately..).. Really, it always comes down to the individual instrument.. Does it play well..? Does it "speak to you" or not..
I recently bought two Epi LP's, one LP Special, an SG, and a Flying V and have had to do fret work (Leveling and smoothing fret ends.) on all of them and change out a pot. But I was somewhat expecting that and now I love my Epi's. Yes so agree with you. Very informative video. Subscribed!
Exactly.
Spot on.. Bought a new BJA LP JR last year.. the wiring was awful and not even done correctly.. and the frets were atrocious.. needed a full level and recrown. I got it working great and it rips but it was hours and hours on the frets.
I'm not sure what you mean by fretwork not being good on Epiphone guitars. Can you elaborate?
Just to put it into context, I am a repair tech, so I see about 2,000 guitars every year, on my workbench.
I actually see many issues with Gibson fretwork. Gibson has issues with fretwork prior to the introduction of PLEK and now with PLEK-ing they have other issues.
The polishing of the frets is actually rougher on Gibson guitars, compared to Epiphone. But the frets are not always leveled on Epiphone guitars. Is that what you are referring to?
My bigger issue with Epiphone is the nut, i.e. the string slot height.
All that said, you are 100% correct about the switch. The cheap "import" switch in the Epiphone guitars can't compare to the solidly-built Switchcraft brand in a Gibson. They are like night and day, for sure.
Cheers...
Thanks for the question. I find that the higher frets on the epiphone feel like they aren't finished properly making it difficult to bend the strings without a scratchy feeling. Gibson's fretwork ain't perfect either but in a different league
as someone who has been playing on and off for about 25 years I think fretwork has gotten worse in general. I never had frets chew my hands up when I was younger, now I see it all the time, what the hell happened? I got a jackson two years ago that was so fucked up i got it replaced.
The cost of labor is going up, plus the labor force is getting lazier and sloppier over time because of the frustrations of the cost of living going up faster than wages.
@@RumpleStiltzkin-bu5he It's more a numbers game. There are far more guitars being produced today than ever before. That means the defect rates, even if they remained steady from 20 years ago, will result in many more duds entering the market. QC is not great on budget brands either. Couple that with the fact that many guitars are sold direct to customers, after sitting in a warehouse for months, and a local shop is NOT inspecting them and correcting for potential issues means that a good majority of those guitars make it into the hands of players without ever having been seen by a professional first.
@yargnad the professionals are supposed to be the manufacturer...
Still not an excuse. I dont care why its happening, it needs to just not happen at no extra cost.
I dont buy 9 eggs for the price of 12 because whatever egg farm issues...
yeah i got a harley benton i paid like 120 bucks for and the frets were pristine like what the hell@@RumpleStiltzkin-bu5he
@@RumpleStiltzkin-bu5he Eggs have the USDA looking out for them. Plus, eggs are eggs. They don't have a plethora of options that determine their pricing and they're sold in bulk.
There is no equivalent guitar regulatory body that ensures all guitars are held to a particular standard, no matter what the price or who's the manufacturer. I get your point, but there's a huge difference.
I have tried maybe a dozen Epiphones in various music stores over several years. They always feel wrong on the fret board, so I have never bought one. I used to think the contour on the back of the neck was the problem.
Yep, that's the square neck shape that some of the neck shapers churn out😂 it sucks so bad that any Epiphone with that neck shape sounded great but I just couldn't stand the neck so I never got one with a square neck shape. 😊 All of my Epiphone have the classics modern Gibson neck shape that is super comfortable and super consistent with all the guitar with this neck shape !
I've just sold my Les Paul copy and I was the same, I just couldn't get on with the neck, it just felt wrong. The guitar was well made and looked great but there was just something wrong with the neck.
@@peter7624i had an epiphone eb-0 bass that I just couldn't warm up to, because of the neck, something just felt off...saved up and replaced it with a gibson sg bass, problem solved
I bought an Epiphone Custom Pro Koa top Les Paul a little less than 2 years ago in 2022. Right out of the box , the guitar played well and also sounds very good. The action seemed a bit stiff to me at first, prompting me to contemplate having it in the shop for a set up. After playing it for a bit , I decided not to because to me , it feels fine. The only thing I might have done is to change the volume control pots because they are not as graduated as the ones on a Gibson. I could change all of the guts and still not spend as much as I would on a Gibson. I showed it to the luthier who does my work and he was impressed with the quality in relation to the price point. Gibson USA has made their guitars virtually unreachable with price tags over $3000. If I paid that much for a guitar, of course I would be convincing myself that I've got the best guitar on the market. Since I already own a Gibson ES 135 that I paid $1000 for brand new in 1994, I couldn't justify spending over $3000 when I was looking for a Les Paul. I bought my Epi and am quite glad that I did.
@@PhilipRichard1013 I understand, hit or miss with the switches and controls. Right now mine is ok . If something fails I'll replace it with original Gibson parts or high quality aftermarket parts.
Two years ago i bought a Sire L7. After playing it for about an hour, both my Epiphone LPs went up for sale. Same experience you had except the L7 was $700 USD. There are great alternatives that don’t break the bank if you seek a bit.
You're not wrong about their cheap switches. My epi prophecy V and Les Paul both had the switch go, after little playing. Never had that problem with another guitar (and PRS SEs are really quality guitars).
Sure you'd expect the frets to be done correctly but it's a simple fix. Not really a problem. And you can find really great switches that are really inexpensive. I don't see any problems here.
I agree that the prices of these high-end Epiphones are totally delusional. $1700 for an Epiphone is beyond a joke. There's an endless list of guitars that are better quality in that price range.
Honestly I'm really happy to hear this! I've loved Gibsons and own two really nice American made Gibsons, a J-200 and an S-1. I've always wanted to get a Les Paul and an SG but never really liked the Epiphone versions of these guitars.
I was recently looking to buy a semi hollow body guitar and everyone told me I should buy an Epiphone ES335. I went to Guitar Center and tried one out, side by side with a Gretsch G5622t and to me there was no comparison. I loved the Gretsch and didn't like playing the ES335 at all. It just seemed like a bad version of a Gibson. I'm anxiously awaiting the delivery of the Sapphire Blue Gretsch I pre-ordered.
I was at a vintage guitar show a couple of months ago and played an old Epiphone ES335 with a patched together broken neck and really liked it. I'd much rather have that one than the new one I played at Guitar Center.
The difference came completely into view when my cousin gave me an Affinity Squier Strat a couple of years ago. That guitar is a really nice instrument that quickly became my favorite, goto solid body. It was really good from the factory and made me want to put a bunch of money into upgrading it to perfection.
I got a Plek setup on it. I put in a Freeway switch 10 position pickup selector blade switch. I added a treble bleed pot to replace one of the tone pots. I gave it locking tuners too. I wouldn't have done that though, if I hadn't loved playing it first.
A lot of people that talk big about Epihpine being better than Gibson have simply never played them side by side. The Epiphones do feel like a cheap version of a Gibson. Just the overall feel is much more plastic and cheap feeling. I still like Epiphone but is ridiculous these days how people boast that they’re better then a Gibson
@@allstopblue5717 Gibsons are better IF you get a good one, Epiphone seems to have better quality control lately? Some say Gibson is improving.
I agree with the second complaint, the switches on Epiphones simply don't stand up over time. As far as the fret work, I bought a Epi Les Paul 60's Tribute Plus 8 years ago and the fret work is impeccable... I did upgrade all the switches less than 6 months after buying it, but the fretwork is flawless.
I'm so glad I found this video, I personally have been a Fender and Squire fan and yes Ibanez too. But I always loved my uncle's Gibson Les Paul, I'd never be able to afford one or at least not till I was his age anyway. So I made the call to purchase an Epiphone Les Paul Custom inspired by Gibson. I figured it is the closest I will probably ever go to getting a Gibson, unless I hit the lottery or something. Long story short I've had it for 2 weeks now and well it's beautiful, but the frets are sharp as hell. And it's not just the 15 string area either. The 3rd fret, the 8+9th fret and then the 15 and on. They all were a nightmare. I am uesto opening up my new guitar and playing a song or two. Not this time as I pulled it out of the box and managed to cut my hand on the frets. I've debated returning it as I was so mad. I paid more for that Epiphone than I've paid for all the Squire guitars I've got. And in fairness Epiphone and Squire are sister companies to better brands, but I open the Squire guitars and they are player ready out of the box. I know the 2 bigger brands are very different but that being said I expected a Gibson sister company to be better quality control that Fenders sister company Squire. In any event I opted to keep it as the restocking fee and shipping fee to return really makes it not feasible to me. So I have a guy I know who works on guitars coming over next week to fix all my fret markers and to do a once over and set up on this guitar so it will be playable and okay. But the quality issues will make it to where I will pass on the SG I was looking at. I'll stick to my other brands that have better quality control. And who knows maybe one day many years from now maybe I will get the Gibson SG to hopefully bypass the quality problems with Epiphone. Again thank you for doing this video.
Dude... pretty much all the new epiphones if it's not in their beginner model line come standard with CTS electronics and very high quality craftsmanship for the dollar. The 1959 model you mentioned as well as the other higher end epiphones come standard with Gibson USA pickups.
I own two epiphones as well as a PRS se custom 24 and two Fenders and I've never had any issues out of my epiphones.... and one was built in 2005.
I bought an e.s.339 Epiphone last year. I do my own setups.
I couldn't believe how low i can make the action with no fret buzzing. It is unbelievable. My Gibson L.P. couldn't get that low of action without fret buzz. It took me hours of adjusting the truss rod and raising and lowering the bridge. Not with the Epiphone. I had a great setup in under 15 mins. It could be maybe luck, idk. But i know the Epi has c.t.s. pots. So does my Gibson, but on a circuit board. My Epi was hand wired. Now, when i get some time, I'll have to pull the boards out and hand wire them myself. The board works fine, but i might want to change things around in the future. Dont get me wrong. I love my Gibson, but the Epiphone line inspired by Gibson, they are awesome. In my humble opinion.
I bought an Epiphone Classic two weeks ago. It needed fretwork all along the bottom of the neck. $600 for the guitar.
I bought a firefly strat a month before the Epi. $198 to my door. Impeccable, ball end frets. Custom shop level frets.
We're paying entirely to much for inferior work.
Man you NAILED it. The Epi inspired by Gibson have upgraded electronics, but the fret work is spotty at best. I have 8 or 9 Epi's right now. One was purchased used, the others all new. Every one of them has needed fret work.
I think most folks consider Epiphones a "beginner" guitar. And the fact that we don't expect good quality from "beginner guitars" is the problem.
I have a couple of Epis, and have had several in the past, even a n early 2000s DOT, and NONE of them, have/had these issues you speak of. The frets were all well dressed, and polished, with little to no fret sprout. And never had any electronic issues, and even though the switches aren't the highest quality, I've never had to replace them, over the past 10-15 years.
To add on what epiphone could do better: Don't discontinue certain models of guitars that are in high demand. I really wanted an explorer 1984 reisue with emg pickups, either white or black. And if you want one that is used, good luck finding one being under 1000 US dollars. Back when I was 18 years old, they cost under 500 euros.
I currently have about a dozen epi guitars, Les Pauls, Explorers, Flying V's, etc. Most of this herd was bought in pawn shops or private sales. The fret work is fine, the switches are fine, the guitars hold their own, play and sound great. With the manufacturing processes and equipment currently being employed these days guitars have come down in price, and up in quality. The big difference between the guitars of today are the names on the headstock and little else.
Great video! You hit it on the head. What I've Bern saying about both Gibson and Epiphone. In my opinion, if you are paying over $600 (USD) for a guitar, the frets and electronics should be flawless. Schecter and ESP/LTD have proven you can have excellent quality at even less than $600.
I've played a 1990 Gibson Les Paul Studio for over 30 years now.... It's not the best model but it's great in my opinion.... Along the way I've bought multiple Epiphone Les Pauls as a backup on stage. BUT, every Epi LP I've played felt like I was about to break it. It felt flimsy and like I was going to break it or something. It also didn't have the output of my LP Studio. So I quit buying the Epiphone Les Pauls and tried to Epiphone SG models. Same thing. They felt flimsy and the neck didn't feel like a Gibson SG. The neck on a Gibson SG is flat down by the heal of the neck. The Epi SG felt fat all the way down. And you are correct about the switches, etc.... they are cheap, not inexpensive, I mean CHEAP......
I love my Casino too, but you're right! The frets are not consistent especially closer to the body and my guitar suffered a problem with the bridge pickup connector too.
I bought a Epiphone 1959 Les Paul and it's beautiful and plays well, no sharp frets, and sounds great.
But there are one or two small issues that I wasn't expecting for a $1000 MSRP guitar. One of my knobs caps is very loose and falls off easily. I called Gibson support and they sent me a new knob, easy fix.
The second issue I had was that there is this very small leftover plastic residue on the guitar and on the case. It wasnt everywhere, just on a few spots, and I just rubbed it away and now everything is fine, but once again, it's not something you'd expect from a $1000 guitar.
If I had to pick between buying the new Epiphone 1959 with Gibson headstock and custombuckers for $1300 or the Gibson Les Paul Tribute for $1300, I say go with the Gibson Tribute.
Epiphone is good for buying cheapist guitars that look like real Gibsons Les Paul Standards, but as far as an instrument that is good enough to gig with and is reliable, you are better off going with the Tribute that plays and sounds like a Gibson, just doesnt have the binding (which is pointless on a solidbody electric) and doesnt have the sunburst finish. It's perfectly acceptable to cut cost for useless aesthetic things as long as the overall instrument is still quality and reliable.
Thank you for sharing to us the Honest Truth. And yes you are right Epiphone have all kinds of quality control issues and they never stay in tune.
I think the main problem with epiphone is actually resale value. When the guitars were $400 or $600, it would be less objectionable to take the monetary hit if you decide to resell. With the current price point, you stand to lose a substantial amount of money. IMHO, the solution with epiphones has always been to buy used, and let someone else eat the depreciation.
I bought the Epiphone 59 Standard a couple years ago, and it was fine right out of the box (I set it up with my strings and my particular set up, but that was it, and it's been great since. It came with CTS pots, a Switchcraft switch and jack, and has had zero problems. Sweetwater here in the states checks out everything before they send it, and I couldn't be happier with it. I am a Fender player, for the most part, but I got a bug to have a Les Paul, but wasn't about to spend money on a Gibson. So, I think a lot of what your saying might have some truth to it, but a reputable store will work out the bugs before you buy it. It's only half Epiphone's fault. Again, I couldn't be happier with mine.
You are correct about the high fret work being shoddy. On 3 of the 4 Epiphones I bought new, beyond the 15th fret any bent note would get choked due to unlevel frets. Some leveling and re-crowning remedied this. All 3 of them are 'Artist' models. I've never had an issue with fretwork on any Gibson I've owned.
I personally believe that the quality control on Epiphones is not the same as it used to be. I played an Epiphone Les Paul Custom that had a twisted neck from new! It's sad because I own an awesome Korean made 2003 Epiphone Goth Flying V that had no issues that I got used. I shall probably not buy another Epiphone without at least looking at it first.
I agree - certainly a few years back when I purchased a stripped (Lennon style) Casino Coupe new - there was an issue with a glue stain under the varnish, the frets were uneven (action set high on arrival to cover this) and the pots, bridge and tuners were cheap. The pots gave up after 9 months, crackling and dropping out... and so did I. I contemplated upgrading the parts but was kind of miffed that I would need to do this within 12 months to have a guitar that could stand up to gigging. And that was the last Epiphone for me.
In terms of alternatives, look also at Vintage which I believe are still influenced by Trevor Wilkinson (and use his parts) - a British company who have been manufacturing through Asia for over 40 years - they have the quality and QC down... for less than the cost of an Epiphone.
I agree with you whole hearted. I have 23 guitars. I have Epiphone, Gibson, Schecter, ESP, Ibanez and my own builds. I have learned alot and do my own fret work and such. When I got my Epiphone SG G400 I thought it was great, needed some fret work. Same with some of my others, even the new Gibson SG that I got. The ones I had no work to do on were: Schecter, ESP and Ibanez. They were perfect work right out the gate. Your statement at the end was dead on, what they are doing won't last forever. I even have a Chibson LP that I had them install stainless steel frets on and I had to do work on it also (burned out some diamond files doing that work), but the quality was still there. Had my own custom serial number done and I put the EMG 77's in there. Now it smokes most everything I got and stands toe to toe with the ESP.
I'd have to agree with some of the comments. I have ALWAYS upgraded electrics on my Epiphone collection. Have not had issues with last few, but if I were to buy another I'd focus on factory id "23" which denotes the Samick factory in Korea.
Great commentary, I agree with you on almost every point - I will say this though, the "1959" Les Paul's they released over the last few years did come with upgraded electronics -on many of them that included Gibson pickups and CTS pots and switches. My biggest complaint is still the inconsistent fretwork. I should not be feeling sharp fret ends on a new guitar - and it would be nice if they would do a better job polishing the fret. and why not switch to stainless steel frets - everyone else is doing it. I own several Epiphones and LTD's - there is a noticeable difference in quality between my Epi's and my only Gibson - not so much between an LTD and an ESP Eclipse, other than maybe the wood being used - the setup and fretwork are flawless and in most cases the electronics and hardware are the same. Epiphone should be focusing on getting the quality and consistency where it should be.
The fret material makes a world of difference. My now 14 year old shecter has great frets as they are stainless but electronics gave out. I have a Yamaha pacifica from a year after the shecter purchase that the frets are worn to buzz but the electronics held up. Its always a gamble until time shows whether the premium price is worth the rig. As with any long time player its what feels right to you, whether its price all the way down to materials. Oh also im now an Ibanez player so test the waters it never hurts.
I bought an
SG G-400 in 2007. The fretwork was really good. Ten years after the plug jack failed, so I did some soldering. Not a bad a deal at all, still rocks
Yeah there is no doubt the problems can be solved by someone handy
I had a SG that in my opinion made that thing scream, later played a Gibson SG, and thought for the price Epiphone nailed it. No regrets.
I bought an Epiphone Les Paul '59 for fun a couple years ago. Yes, the fret ends were sharp, but for another $100 I had the guitar set up and fret issues addressed. It plays like butter now. Another take on this model was the upgraded electronics which I have no issues with to date. What I think other companies like ESP or PRS do that Epiphone doesn't is just spend that little extra time working on the frets and electronic issues. Through my experience, it's almost expected with Epiphone that you're going to need a proper set up and fret job especially on a brand new purchase. The players who say, "My Epi plays great," in a lot of cases purchased it used where the former owner more than likely had the work done. All companies should spend that extra time, but in this mass-produced world manufacturers just spit out product and rely on brand name only as a selling point and of course BS marketing. Epis have been notorious with this for years, but sometimes you get lucky. But in the end, you're right Epi needs to better their product by addressing fret and electronic issues. I'd pay another $50-$100 just to have it right at the purchase and not having to bring it to a shop to correct after the fact.
100% agree. How hard can it be to pay a trained staff to properly dress frets all the way up the fretboard? It’s so basic and necessary in my opinion. I end up fixing it myself. I shouldn’t have to touch it.
Ive played Epiphone since I was 13 and I love them. First thing I always do is have them set up by a pro. Every time Ive bought one the intonation is out. Another thing I do, change the nut to a Tusq. It'll make the beautiful harmonix of your Les Paul stand out.
On another point, when doing your own string changes, make sure you tighten EVERTHING down. Espies in my opinion vibrate heavey. So they are bound to make shit come loose and that always sounds bad. I hate ESP. They feel clunky and cheep. I'd rather play a Squre than an ESP or a se prs. Glad to see some Epiphone lovers out there!!
I have played, owned, tried thousands of guitars starting around 1974 (when I was old enough to have the store salesperson take me seriously as a potential customer) So, this spans multiple guitar trend phases. For me, it's ALWAYS been the frets, specifically the fret FINISHING. Cheap(er) guitars ALWAYS had cheap or sharp or poorly fitting or "gritty" frets. I suspect that's because it's, by far, the most expensive, labor intensive, expert($) required process on any given guitar. I once had a "cheap" guitar refretted by my luthier. It cost a lot of money (I just kinda liked the oddball guitar in question) but it changed EVERYTHING. Guitars are all about straight neck and quality fretwork (for me). Everything else is swappable and cheap to change.
If a guitar has single coils or splittable humbuckers, then it should be fully shielded, both the audio cabling and the cavities. It is not that expensive to do at the factory. It is unforgivable for the manufacturer to deliver a guitar that is an antenna for EMI. Also there should not be gross defects on a guitar costing over 200 dollars. 1000 dollars is right out.
I only have one epi: a Dot Deluxe. I have not experienced the issues you describe with it. Thanks for your video.
I own 2 pro les Paul's, one a standard the other a custom. Both were built in Korea over 20 years ago and they both play and sound great! Have only had to replace the tone pots and the capacitor in the standard. Not bad for the amount of play they have seen over the years! Great guitars.🎸
I’m an acoustic player and epiphone has never let me down. But I have heard some bad things about a few electric models.
Brother, I could have fixed the fretwork on two Epiphones in the amount of time it took you to come out and say that the problem is the fretwork 😂
But you're right. I just got an Inspired By Gibson 335 and everything is perfect except the frets are rough as sandpaper
I bought an EB3 Bass back in 77. I got sold on it by the salesman who convinced me I could play everything from YES to Black Sabbath. I paid around $120 I think. It wasn't bad but I had to replace pots too often. I like to play soft at a higher volume but when I did it on my EB there were tonal issues. I never had that with my P-Bass, my Ricky or even my Ibanez bases. I still play it but not often.
I've owned two LP-style Epiphones, both made since 2020. One is the '59 Les Paul collaboration with the Gibson Custom Shop, the other is the TV Yellow LP Special. Neither of them have fretwork issues - they both compare favorably to my Gibson Les Paul. The pickups and electronics are Gibson on the '59. I had planned to replace the electronics on the TV Yellow Epi' but I didn't find it necessary. I did put locking tuners on both, and Faber hardware on the '59. Neither "feels like a cheap guitar" or falls short of my expectations in any way. I've been playing for 49 years. I respectfully disagree with the thesis of this video - I think he's wrong.
I purchased a China made Epiphone Casino last year at $699 US and while quite satisfied with the fretwork and playability saw the need to upgrade the electronics and hardware. A new Tonepros bridge, Lindy Fralin noise canceling P90s in chrome and a Toneman 50s wiring harness. I also cut some fairly dense foam pieces to put under the tailpiece and pickguard. After completing the upgrades myself the total cost was just under $1300. It is amazing the transformation this made to the guitar. It is silent at full volume, sounds unbelievable, plays even better since the notes now jump off the fretboard and has absolutely zero rattles. I would put this up against the $3500 american version everyday of the week. At less than half the price I am blown away at what can transform a "cheap guitar " with quality upgrades. Out of my 28 guitars the only one that was basically perfect when bought is my PRS 35th Anniversary Custom 24 that cost $4500. Not one under that price point was what I consider perfect and I have owned, played, customized and built guitars for the last 50 years!! FYI I am not a professional guitar tech just a person who wanted more guitars than I could afford to maintain and upgrade if possible. I learned guitar tech out of necessity and have become very adept at it over the years. You can too!!!
If they would just put in a good nut, good frets, and good tuners, Epiphone would kick serious ass. I have an Epiphone Les Paul Special I and am giving it the custom shop treatment because I know it can play better. I’ve given the frets a flawless recrowning, and they feel like a million bucks. But I hear you and you are SO RIGHT. If Epiphone could focus on providing quality instruments at their lower price for young, new players, the brand would absolutely explode.
Being a fifty plus year guitarist, Firefly is your answer. Better quality by far ( the ball end frets are a game changer), good electronics and a fretboard that Epiphone can only dream about.
I was completely blown away by how good the fretwork was on my ltd ec256. which was bought as a scratch and dent from Amazon. if you would've seen how bad the packaging was...? loose inside the box, and still fret work was immaculate and the set up was better that any epiphone I have ever played. that says something.
How would bad packaging affect the fret work???
@@benburnett8109 A string could cause a dent in a fret if banged.
@@benburnett8109 I was referring to how well the guitar endured being shipped across the country, all while being completely loose inside the box. Not that the packaging itself influences fretwork. And I was contrasting the guitar's apparent durability to others that arrived completely secure in their packaging.
The only problem I've had that is common to every Epiphone I've ever played is, the pots are completely non-linear. They're either on or off.
the 59 fixed that, granted when it came out it was the most expensive Les Paul from Epi.
Your observations are spot on… However cutting corners like “fit-&-finish” and cheap electronics is the only place for this price point guitar can make profit. The “bones” of these guitars are decent. Replace the electronics and have the fretboard “Fret-leveled and crowned” and move on down the road with a good guitar that would have cost three times the price. Beat and use their system. Or spend way more for the Gibson.
I used to think so too. Till I tried the latest batch of PRS SEs which are actually cheaper than Epiphones. The thing is Epiphone (or Gibson) is taking the easy way out by re-positioning and marketing existing products with cosmetic changes linked to nostalgia, instead of investing the time in actually improving their overseas factory production process, like PRS is doing
Yes I agree… However a PRS is not a Gibson or Fender style guitar either.
I absolutely agree with the fret work complaint. The electronics however, based on your explanation seems like standard switch wear and a soldering iron fix.
I did find it interesting that you kind of compared an EII ESP to a budget guitar because those are worlds apart in quality and price and should be expected.
That being said many LTD/ESP instruments are definitely better than Gibson and Epiphones by today’s standards.
I guess if you’re someone who loves Epiphones just spend an extra $12 on a switchcraft switch and have it installed to give you an added layer of confidence in the guitar. Make slight improvements over time if you cannot afford all at once?
Ever since guitars started coming from Korea, Indonesia, the Philippines, and China (especially china) I have had countless brand new and just passed warranty guitars in my shop that could not be setup well without fretwork, and not just all of the new brands made there, but well known brands "Alternatively priced" (so no way just the price) instruments! So far two of them were PRS's, one Hagstrom, and many Ibanez's, Epiphone's, Squire's... you name it. Not only is the fretwork all over the place, but they often have truss rods already maxed out and on edge of stripping out the treads, or installed too close to the fingerboard (one way rods) to where they are not very effective...
All that talk about "because they are made on CNC's they are more accurate" and that cheep guitars are just as good as expensive ones other than maybe spending $300 on new electronics and pickups. Well that's just a crock of shit, and always has been: No CNC machine can do jack about what can and will happen when you slap instruments together with woods that were not dried properly, truss rods that are made of weak alloys, and in necks that can't already hold most of the tension without one; A truss rod is not supposed to be a reinforcement of the neck itself, but an adjustment of the relief so they can handle different gauges of strings (different tensions). Once inspected, even if good, that is irrelevant, because the problems gradually start showing their ugly face, especially when they are shipped from the factories that are almost all in very humid areas (jungle climates), to much dryer areas in the world. BTW: Scheckter's and a few others are sent here to the US to dress frets and what not before sale, but even those have not had enough time to settle when you get them, they only have fewer problems out of the box; you just wait! The only thing a CNC can guaranty is faster and much easier production, so you need fewer people, and people with less skill, and even a poorly maintained CNC, bits that are not very sharp... can trow off the accuracy quite a bit too.
In the end many who ask me to install a few hundred bucks in new parts, add my time for the work, on their $300 guitar brings it up to a $600+ guitar, and that is just the least of their problems, because a fret level and re-crown can easily go over $250, so now the owners cost is ~$900 to $1000! I often can't even recommend doing fret work in knowing the instrument is still not stable, and needs another year or two to do so, and so even my own meticulous fret work can be in vain, as well as my reputation on the line, for being blamed for stuff completely out of my control. I had to greatly expand my service agreement to outline that these problems can be expected, and why I cannot be held responsible for them if you don't heed my warnings, and also log any of my findings as to expectable failures in the repair log so the customer has written record of it, and with it as juxtaposed to may warranty that covers my work, and not the shortcomings of instruments I didn't make!
I AGREE WITH YOU 100%. I BOUGHT 2 OF THE 58' KORINA EPI EXPLORERS YEARS AGO & BOTH OF THEM WERE USELESS TO PLAY ABOVE THE 14TH FRET. EVEN WITH TRUSS ROD ADJUSTMENT. HAD TO SET THE ACTION SO HIGH THAT THEY WERENT WORTH PLAYING. SAD DEAL.
I’ve had a few Epi’s over the years. Never had any issues with them.
I currently use a 2018 Epi SG Modern in trans black. I just love it. Can find no flaws. A fine instrument. I just don’t think modern Gibsons are worth the price tag although, I still love them.
I just ordered a 1979 Yamaha Studio Lord SL500 from Japan, I heard they were good quality so hoping for the best...shipping $170 guitar was $379.
I have no complaints about the frets or switches on my cheap Made in China Epiphone Les Paul Studio LT Heritage Cherry Sunburst I bought new at Guitar Center for $250 four years ago. I love that it weighs a lot less than the Gibson Les Pauls I tried at Guitar Center and sounds almost as good to my aging ears. I also love my two acoustic electric Epiphones--a Dove Pro $370 five years ago and an Excellente $1300 two years ago. They were both made in Indonesia (like my PRS Silver Sky SE John Mayer--about as good as my Fender American Original 60s Stratocaster for half the money), where I think the craftsmanship tends to be better than in China. The fretwork is fine on them and the electronics are solid. They look and sound almost as good as my Martin, Alvarez, Maton, and Zager guitars that cost me two to five times as much.
I have an Epiphone Les Paul; it was made in Korea by Samik plant in 2002 before production was transferred. The factory bought Valley Arts Guitars; I believe. The action is sublime, and it stays in tune incredibly well and no fret problems. Very nice instrument well made.
Samick are a class act.
Love your channel man, I’ve owned several epiphones and agree with the QC issues. I had two LP standards that I basically ripped apart and replace all the electronics, hardware and had to do full blown fret jobs on each Epi I owned. I loved them… eventually but I also learned how to do setups, fret leveling, soldering etc just to get it playable for gigs. New players don’t know how to do all of that and it’s a usually a big ask especially for the price point that Epiphone has been charging recently. I agree that there are other quality brands selling guitars at similar or cheaper prices putting out a quality product.
Great video. You are 110% correct! I got the 59 Les Paul with the Gibson burstbuckers. It had to go to the luthier to fix the fretwork. It now plays perfect but it was costly. However it is currently a better guitar than the Gibson Les Paul tribute at the same price. Sounds wise it is more Les Paul then the PRS SE DGT and having tried the DGT, I found an issue with the tone pods, instead of being a smooth transition it almost jumps in levels, whereas the 59 Epiphone is much more smooth. With the burst buckers on the Epi you can go from clean to roar crunch just using the tone pods if coupled with a good tube amp. In my books this is how a Les Paul should behave. All in all I just did not get the "Les Paul" feel with the PRS. Out of the box the build quality is much better but, it's just not a Les Paul, it's different.
Youre 100% correct about everything i heard you say.
Thanks. Appreciate the kind words
@ministryofguitar i dont get to say them often, so youre welcome.
The prices of import guitars is out of fricken control.
I recently bought an Epiphone Les Paul 60s and it's the best guitar i've tried in that price range, nice finish, no sharp frets and didn't even need a setup.
I was thinking on some upgrades before i bought it but in my opinion it doesn't need any.
I've had this problem with a couple of Epiphones before but I learned to level frets and work on guitar electronics so doesn't bother me that much. The last 2 Epis ive bought are a 2020 and a 2023 and they have no issues.
My very first Epiphone guitar was a Casino 1963 what was i thinking when i sold that guitar never seen one again, but you my friend hit the nail on the head i have 3 right now 1 is a 2022 SG Muse bad fret work sounds great but bad fret work,#2 i have a 2010 SG 61 vershion again Fret work bad, last ly my 2000 epiphone LP 100 bad switch needs fret work o and my 2022 MUSE i had to do switch cleaning on it all the time,,,, my SG Muse is a go to guitar right now i can not beleave the sound of it thank you for your review
I went into this video not sure what you were going to talk about specifically but I had a hunch it was going to be about the frets on the Epiphones lol. I am actually a drummer who plays guitar and have always owned Fenders or Squiers. I recently bought a 2020 Epi Les Paul Custom brand new w/ the ebony fretboard from Sweetwater which did their "55 point inspection" and the frets were horrible on it. Within a few days of playing it I noticed I was getting metal shavings coming off the frets when I would do bends.. esp in the 12th fret "pentatonic box" region like you stated. You could actually see where I was mostly playing on the neck because certain frets were rounded then around the 12th fret they were completely flat and pitted. This was my first time ever owning a Epiphone and was not aware that this is an actual problem with Epiphones frets. I was told this when I brought to my local luthier to get it refretted. Im not even a gigging musician either, or a player who digs in hard when playing. I am a bedroom player who plays maybe 3+ hours or more a day esp during the pandemic I was playing a lot more. I bought the les paul brand new and I think it was around 800$? Its not the most expensive guitar but for that type of money I never wouldve thought the frets would wear out that fast. Within 6 months of playing the frets were already done. Im not even sure how long frets should last, but I still have my very first Squier strat I got back in 02 brand new for like 250$ that Ive played thousands of hours on and played countless shows on in high school and I've never had to change the frets.. and that is a entry level cheap squier lol.
Agreed with the band fret work and electronics. Also I have found the Epiphone stock pickups to not good. Can't put my finger on exactly what it is, but they just sound bad. Lacking a clarity you find in similarly price guitars.
They fixed the electronics concern on the Inspired by Gibson. My 2020 Epiphone Firebird was as good as any "real" Gibson Firebird on the wall at my local stores. I totally agree with you about the artist series fret work. I picked up a Greeny the other day. The neck was amazing. The pickups / electronics sounded good. However, fret work was garbage for the grossly high price. I picked up a $1,300.00 CAD PRS and it was great! No complaints & actually changed my mind about my previous thoughts of PRS (based on the one PRS guitar that I previously owned).
Gibson and Epiphone guitars almost 100% of the time have quirky frets where the neck and body are glued together. You'd think after all the years of feedback from customers they would address the problem.
BASS player here, I feel you man BUT as humans we have to know a minimum about our bodies to properly take care of our selves and as musicians the same. I got to do all the Luthier work on my bass since I'm 16, and on my guitar players instruments.
Lots of info on the net for basic tools and know how to make your instrument playable.
P.S. I'm 51 and the baby boomers all died in the 80's to the 90's, I AM GEN X, not a boomer.
Plenty of boomers still around. I'm in my 50s as well.
@@Scott__C My grand parents ARE boomers and have been dead for 30 years.
Anyone over 100 years old is a boomer.
The switch on my PRS SE Baritone just failed last week. Not a pass to epiphone as ive had the same issues but im just putting it out there.
it can happen for sure. also I don't like SE nut material
Instead of buying 5 mediocre guitars, buy one good one. 👍🏻
PRS SE fretwork and tonal quality in upper frets is to me the best I’ve found. I have played plenty of cheap-to-expensive, new-to-vintage guitars and they ALL are lacking in the bass-side wound upper frets, some more or less than satisfactory. But only one guitar in 40 years achieved unobtainium - a PRS SE CE24 from 2008 that I tried in a whim at GC because I had never gave PRS a real look before. It turned out to be a GC ‘exclusive’ with ebony fretboard!! And it was marked down to $650!! Amazing 😎
I have an Epiphone DC 90 Pro that a friend was selling with a hardshell case. I got it for $400
and I like it a lot. It plays very smooth, but there may be a glitch in the pickup switch. I tend to
just use the bridge pickup but sometimes I would prefer to have them both on, so the center position of the switch. It could be there's a problem with the neck humbucker but
I don't know.
I think Epiphone are inconsistent but if you got a good one. Great
I picked up a V in Korina, so far so good. Plays great and the electronics are easily better than my first Gibson Les Paul Studio. They actually work. I was scared I missed something with the title of the video.
New Classic Open Book Headstock on an Epiphone is pure perfection. Looks and feel and using Gibson's classic designs is what Epiphone should be focused on. Period.
I would expect some fretwork to be necessary on almost all new guitars below a certain price point. And in 16 or 17 years of doing set ups and repairs I've seen a few high end guitars which have needed something doing. If I couldn't do it myself I'd factor in the cost of a set up into the budget for a guitar. It's one way the factories keep costs down. Set ups and fret dressing is time consuming and hence expensive. And it's the single most important thing in whether or not you'll enjoy the guitar.
What exactly does he mean by bad fretwork? Wrong placement, wrong style frets, bad metals??? Have your frets polished and you'll fly.