Your fortunate to have several wheels available to you, as much as this might suck. Your not the guy that can just barely afford 1 wheel and then have this happen. Glad your sharing your experience though. If the problem is ever diagnosed I'm sure you'll post it.
I personally love the fact you give us updates and impressions as they happen. I have a T4 v3 and my wheel has been okay but I feel much better knowing what issues you had so I can watch for them. I think it sucks when reviewers spew sunshine and rainbows out their ass. Most wheels have the potential for issues due to Chinese quality and I think being informed on the good and bad makes for a more savvy community. Thank you and keep it up!
Bruh I NEVER go in the garage for that long and where I put the timer requires a step stool haha I was like NO WAY I'm redoing this video because that stupid light! Thank you for watching, stay beautiful! P.S. I know you follow a lot of my videos, I appreciate you!
Ya my biggest issue is I know the manufacturer will take away your demo rights if you trash talk any new wheel so with that in mind ANYONE who gets a demo wheel has potential to be bias because if they are not they'd lose that awesome ability of trying every new wheel. I not only but the wheels but also pay air freight and end up spending more than the wheels cost to try and help the community understand the wheels performance, comfort, potential and any issues. Thank you for watching, stay beautiful!
Someone's gotta do it... To many demo wheels out there. If you get demo wheels you are not going to trash talk it or you'd never get that luxury again from these manufacturers so it's really hard to take most new wheel videos without a grain of salt.
Great video, your straight forwardness is refreshing and so sorry for the frustration. Hope dinner put you in a better frame. Please keep up your great content. 6 pac Gord
I appreciate your honesty in all your videos. I know since you buy your wheels, you gonna tell it like it is. Had a chance to get a Extreme someone ordered and got hurt, so didn't want anymore, supposed to be here Monday, little nervous after seeing this vid. I guess i was 1st one to pre-order it from Alien rides.
I've never personally had a cutout on any wheel and I've owned A LOT lol I respect the boundaries of the wheel. This is a issue that has ONLY to do with the killswitch (if you want to park it simply turn the wheel off instead) so it wouldn't be likely for it to fail like this with you on it, not to say it can't but most cutouts are due to negligent riders. Ride safe and enjoy that wheel!
Not sure about this model but I know the EX-30 and master with the new firmware if you use the kill spin button it fries the board. No update after that happens will do anything besides a new board
Do you enjoy the ride of the patton or the extreme bull mini more? Im inbetween these two and i think im leaning towards the patton just because of begodes reliability.
If I knew the mini was going to be as stiff as it is AND if they were the same price tag I would 100% get the Patton all day every day. My sherm S is my favorite wheel of all time no question. The Patton is $3200? Normal dealer price but through James (Next Gen Mobility) it's $2900. Meanwhile the cp mini is $2299 on eucdeals.com right now. And since the biggest issue I personally have is the suspension (EB is sending softer shocks for me to try) I'd get the Mini. If you are a speed rider the cp mini has greater speed and can sustain higher speeds for longer. If you aren't a speed rider and have the cash get a Patton. The Patton you'll also get a better display, on board controls and leaperkim's quality.
Hope they resolve it for you, was really looking forward to this wheel and now getting worried. I wonder if you just had a bad luck with a dud or whether this will happen more due to quality issues
Thanks for keeping it 💯 and sharing the good and the bad. If manufacturers don't want people to post things like this, get the damn bugs out before they go into production. This is one hell of a weird issue and I am sorry this happened to you. Thanks for sharing 👍
Thank you! All the manufacturers keep pushing to have the best wheels and it has definitely brought some amazing wheels into the picture within the last year but QC 100% needs to be stepped up from all.
@@EUCWayOfLifeThis is the result of human error and your unrelenting know it all behavior that prevented you from reading other people's posts and recognizing that every current generation commander wheel in circulation had this issue. If you paid attention, you would have known not to put it in spin kill and turned it off instead in lieu of firmware update. You chose to be your consistently ignorant self and continue on your "I know everything" path and now you have a very expensive paperweight.
So when you pushed the kill switch and put it down, then came back after a few mins, did you then push the kill switch and bring it back up? or just bring it back up without hitting the kill switch?
Lem (EUC Underground). He's getting it taken care of but as always as soon as I throw a fuss (for good reason) Begode typically reaches out to me first.
@@EUCWayOfLife Not surprised, they don't want to take responsibility for anything that goes bad. Seriously like when your wheel blows up in a Train Station in Korea, you've got problems
Your fortunate to have several wheels available to you, as much as this might suck. Your not the guy that can just barely afford 1 wheel and then have this happen. Glad your sharing your experience though. If the problem is ever diagnosed I'm sure you'll post it.
Thanks for disclosing this. But who is James?
I can literally see the gasket. It's not a gasket that goes around the lip, there's a very small channel and I can see that it is present.
Good update 👍
PS - dont for get to set timer on garage light motion sensor longer🤣
I personally love the fact you give us updates and impressions as they happen. I have a T4 v3 and my wheel has been okay but I feel much better knowing what issues you had so I can watch for them. I think it sucks when reviewers spew sunshine and rainbows out their ass. Most wheels have the potential for issues due to Chinese quality and I think being informed on the good and bad makes for a more savvy community.
Thank you and keep it up!
Bruh I NEVER go in the garage for that long and where I put the timer requires a step stool haha I was like NO WAY I'm redoing this video because that stupid light!
Thank you for watching, stay beautiful!
P.S. I know you follow a lot of my videos, I appreciate you!
Ya my biggest issue is I know the manufacturer will take away your demo rights if you trash talk any new wheel so with that in mind ANYONE who gets a demo wheel has potential to be bias because if they are not they'd lose that awesome ability of trying every new wheel.
I not only but the wheels but also pay air freight and end up spending more than the wheels cost to try and help the community understand the wheels performance, comfort, potential and any issues.
Thank you for watching, stay beautiful!
Dang! Sucks to have issues with your EUC. Glad you're documenting it and sharing it with the community, though.
Appreciate your dedication and honesty.
Someone's gotta do it... To many demo wheels out there. If you get demo wheels you are not going to trash talk it or you'd never get that luxury again from these manufacturers so it's really hard to take most new wheel videos without a grain of salt.
Great video, your straight forwardness is refreshing and so sorry for the frustration. Hope dinner put you in a better frame. Please keep up your great content. 6 pac Gord
I appreciate your honesty in all your videos. I know since you buy your wheels, you gonna tell it like it is. Had a chance to get a Extreme someone ordered and got hurt, so didn't want anymore, supposed to be here Monday, little nervous after seeing this vid. I guess i was 1st one to pre-order it from Alien rides.
I've never personally had a cutout on any wheel and I've owned A LOT lol I respect the boundaries of the wheel. This is a issue that has ONLY to do with the killswitch (if you want to park it simply turn the wheel off instead) so it wouldn't be likely for it to fail like this with you on it, not to say it can't but most cutouts are due to negligent riders.
Ride safe and enjoy that wheel!
This sucks sorry you're going through this.
Thanks brother!!🙏
Not sure about this model but I know the EX-30 and master with the new firmware if you use the kill spin button it fries the board. No update after that happens will do anything besides a new board
Do you enjoy the ride of the patton or the extreme bull mini more? Im inbetween these two and i think im leaning towards the patton just because of begodes reliability.
If I knew the mini was going to be as stiff as it is AND if they were the same price tag I would 100% get the Patton all day every day. My sherm S is my favorite wheel of all time no question.
The Patton is $3200? Normal dealer price but through James (Next Gen Mobility) it's $2900. Meanwhile the cp mini is $2299 on eucdeals.com right now. And since the biggest issue I personally have is the suspension (EB is sending softer shocks for me to try) I'd get the Mini.
If you are a speed rider the cp mini has greater speed and can sustain higher speeds for longer. If you aren't a speed rider and have the cash get a Patton.
The Patton you'll also get a better display, on board controls and leaperkim's quality.
Hope they resolve it for you, was really looking forward to this wheel and now getting worried. I wonder if you just had a bad luck with a dud or whether this will happen more due to quality issues
Thanks for keeping it 💯 and sharing the good and the bad. If manufacturers don't want people to post things like this, get the damn bugs out before they go into production. This is one hell of a weird issue and I am sorry this happened to you.
Thanks for sharing 👍
Thank you! All the manufacturers keep pushing to have the best wheels and it has definitely brought some amazing wheels into the picture within the last year but QC 100% needs to be stepped up from all.
@@EUCWayOfLifeThis is the result of human error and your unrelenting know it all behavior that prevented you from reading other people's posts and recognizing that every current generation commander wheel in circulation had this issue. If you paid attention, you would have known not to put it in spin kill and turned it off instead in lieu of firmware update. You chose to be your consistently ignorant self and continue on your "I know everything" path and now you have a very expensive paperweight.
So when you pushed the kill switch and put it down, then came back after a few mins, did you then push the kill switch and bring it back up? or just bring it back up without hitting the kill switch?
Sounds like shorted mosfet.
Where was this wheel purchased from?
Lem (EUC Underground). He's getting it taken care of but as always as soon as I throw a fuss (for good reason) Begode typically reaches out to me first.
@@EUCWayOfLife Not surprised, they don't want to take responsibility for anything that goes bad. Seriously like when your wheel blows up in a Train Station in Korea, you've got problems
its a common problem