I am getting an error at 18:53. The problem occurs when I add a sketch to the Guides section. The error is "A guide does not intersect one profile (or section)"
Sir that was an amazing tutorial! But just wanted to know what is the difference between the sketch tool that we normally use and the positioned sketch?....just wanted a bit clarity and the advantages in opting for the positioned sketch option.
Hey, that was an excellent tutorial. However, I find GSD still quite complicated. Maybe you could walk us through all of the Sweep possibilities for example and some other construction features in the GSD environment? Just an idea, you've done amazing job otherwise :)
Regards, I follow all of your tutorials on youtube, and every time I thrilled with your knowledge. Do you have any manual or tutorial for advanced users in your release?
Herr Walden, Ich habe eine Frage: Wozu braucht man die diversen lilla/blau Knopfe in GSD? Ich meine, die jenigen, mit "Volume...etwas". Hab noch keine Video gesehen, wo man die benutzt. Ich denke, solche gleiche operationen macht man mit dem Flächen eher im "Part design"?
Hello Wolfgang, Can you tell me how to set up workbench bar you have at the top of your page that allows you to pick colors and line thickness, etc. I do not have that feature and would like to know how to activate it if possible. Thank you .
Hello Mr. Walden, when doing the step on 17:21min the coincident line to the point of the symmetry surface recently created I just can't do it because when i get back to the sketch4 the symmetry surface recently created disappears. How can I make it stay there when i get back into sketch4? The next question I have, What does the extract function does (sound pretty silly due to the word meaning)? What are we extracting when we select the edges and Why? I really appreciate your time an effort,
+Orl Esp Extracting the edges - a new element is created and it is selectable in the tree. And you should not use the boundaries of a surface directly. Why your symmetry surface is disappering - I can´t tell without your catpart, sorry.
+Wolfgang Walden Thanks for the answer regarding the extracting the edges. It is disappearing because the sketch4 was created before the symmetry surface, so when i get back to sketch4, it shows is as if the symmetry hasn't been created yet. and i do not know how to edit the tree so i can move the sketch4 after the symmetry. for now, I just created a new sketch (after the symmetry). I appreciate your comments.
heyy , I got the same problem too but I found out that you can reorder the features by right clicking on them right click on sketch4 > sketch4.object>reorder>aftersymmetry.4
I Mr. Walden. How could you make appear sketches, curves, lines, constraints, etc... on the tree but in blocs? I mean, a bloc of planes, a bloc of curves, a bloc of lines.
Mr. Warden can you please do a few tutorials,where you explain various aspects and definitions of the terms used in sweep and daft command in CATIA GSD?? I like your tutorials,but I am unable to understand as to why you entered 90 degree as an angle or what is it meant by "limit curve" and tangency surface".When I use CATIA GSD I am confused by all these parameters,so everytime I start a new project in GSD and if I want to use these commands I have to use the iterative approach,where I experiment will all the commands and don't get desired results.It would be really helpful if you do a few vids on this.
Hi sir, I am learning many techniques from Ur tutorials.. Whenever u use "law" command in CATIA v5 .. I feel unclarity .. Will u make a special tutorial particularly on the command regarding its uses , purpose, the logic behind the command.. with basic examples . plz sir
Thanks for this great tutorial. Where could be possible to find video tutorials regarding rework from isolated solids and then extract surfaces + untrim and redesigning new concepts? I think this kind of tutorials should be nice also for designing tools . Example: Molding tools or Werkzeuge Kind Regards , Toni
Wolfgang Walden Thanks, I have a look to your list. The typical examples are always reenginering with point clouds or from scanned surfaces. Best Regards
Great video, but for some reason i don't have the geometrical sets you have in the Tree. Do you automatically add them through Insert? If so, why is that important?
+snotool Hi, in shape design you have to organize your features yourself in the tree. So it is easier to find errors and to change the model. You have to insert it yourself and give them a proper name.
Wolfgang Walden thanks! But I'm having problem after doing that. I had create the geometrical set, but when I have one selected I'm not able to see the others. I already checked the hide/show option and they are in show. How can I fix that?
Brother, thank you very much for your videos, can you tell me how you make the tree like sketches, curves and surfaces? apart from that your tutorials are working perfectly with me. waiting for your reply
Sir, i see that you already hideyour plane. But what is that lining on the beginning of your drawing? can u teach me how to get that? i can't follow your video becuase i missed the part where you get that line
question outside of subject. Can youe explain why are additional axis are used in automotive and give maybe any tutorial when it's needed and when you using it ?
Hi, you could copy the sketch - just select it, right-click - copy, switch to the new part, select the body and plane - right-click - paste and select the missing external references. You could also go for a powercopy.
actually sir, i want to copy profiled face only rest of the body will be a cuboid....so that the profiled component should rest on my new part in assembly...
hello sir I am try in pattern but I think this type surface not possible in pattern . please see video last time sent you in proe possible by variational sweep & circle section variable by relation I think same possibly in nx but how to do cicle control by in expression
+H K VERMA I see, yes ion NX you need for example for a helix an expression, it is odd I know. Take a look here: ruclips.net/video/lWNVcZbexl8/видео.html
@@wolfgang.walden.cad.training hello sir When i do define in work project to the curves , the circle is not showing or indicating which is i already created in sketches ......is it any customize settings prbm ..?
I suppose, only the body/set which is in work is shown. There is a switch in the bottom toolbar to enable/disable - 3 rectangular boxes above one another - disabled / one rectangular box in orange colour - enabled.
I see when you are setting constraints, your constraint button is always active. Did you do that with a shortcut or is it a higher version of Catia then i have (Catia V5 r17)???
+Wolfgang Walden Also, since I have your attention, can you point me to some tips and tricks for Catia(like this one)? Things that are considered trivial but speed up the modeling process and also what to do and what not to do or how to approach modeling in Catia? I have been using Solidworks for most of my engineering life but now I see I have been using the wrong CAD package since Catia is so much more powerful then Solid. I'm really keen on learning as much as possible so anything you can tell me is much appreciated! Again, thank you very much dear sir!
+makrofocus Hi, just watch all my videos, especially the basics. If you have any question, feel free to ask. Solidworks has its own advantages. But anyway Catia is still my favourite software.
I got some idea in proe by you tube in proe this type model creating by variational sweep section control by relation tool. I think i nx possible by expression but confusion is how to do
Sir my components are same so I am thinking is it possible that I link a drafting drawing to another part which has nearly same dimensions and shape in catia. So that I do not have to do whole drafting again. If this could happen then I can save lot of time.
Hi Wolfgang Walden, Your videos are really helpfull. Can you please give me some Reverse engineering(Flächenrückführung) video or upload it..Better in English.. Danke..!!
hi, there are already some videos in my channel which show the basics - use a sweep and a helix as path. -if you need something special - please mail me drawing.
Sorry, what do you mean by "loud xyz axes"? - Tools->options->infrastructure->part infrastructure->register display there is a slider for the size of the axis.
Das war eine hervorrangende Übung. Vielen Dank, dass Sie Ihre Kentnisse und Erfahrung mit uns teilen.
Danke fürs Lob :)
Hello Wolfgang. I just finished this Ringspanner tutorial and wanted to thank you for taking the time to post this, Cheers!!
You´re welcome :)
Vielen lieben Dank für die Tutorials! Sie sind einfach der Beste, den ich kenne! Grüße aus Mexiko!
Bitteschön :) Grüße aus Bayern.
Thank you for the video!
I am a student and designing a mechanism.
I find the video is really helpful and inspiring.
+Nabil Imran Great :) - you´re welcome.
Herr Walden, thank you for the video. Your videos are incredible.
+Nicholai Dmetrivech Steinberg Thanks, you´re welcome.
Thanks for the great videos, I am planning to watch the whole playlist.
Great, you´re welcome
I'm from Viet Nam, your tutorials are amazing.
Thanks :)
Thank you for all your effort!.. your presentations are very clear!
Thanks for your praise :)
in this equation dia is section circle dia & trajpar is guide curve & slot is no of section &you know what is amplitude
Nice Video on SPLIT Surface, Blend, Multisection with use of 3 guide curves
Thanks :)
I am getting an error at 18:53. The problem occurs when I add a sketch to the Guides section. The error is "A guide does not intersect one profile (or section)"
The error message tells you exactly what your problem is: one of the guide curves doesn´t intersect/touch one of the profiles/sections
Sir that was an amazing tutorial!
But just wanted to know what is the difference between the sketch tool that we normally use and the positioned sketch?....just wanted a bit clarity and the advantages in opting for the positioned sketch option.
Please watch my Catia v5 Basic Videos - you can control the orientation of sketch axis and sketch origin.
@@wolfgang.walden.cad.training For sure i'll watch it sir...thank you for the quick reply!
Fantastic! Loved your totorial!
Great :) you ´re welcome.
Hey, that was an excellent tutorial. However, I find GSD still quite complicated. Maybe you could walk us through all of the Sweep possibilities for example and some other construction features in the GSD environment? Just an idea, you've done amazing job otherwise :)
Thanks. There is one especially regarding sweeps : ruclips.net/video/DcXAfps6l_o/видео.html I will do a remake in HD with audio soon.
in proe by this equation -dia*sin(trajpar*360*slot)*amplitude
Please, I want the download link for the models in the videos
Live is no wish concert. I want a lot of thing, as well. And it doesn´t help to spam!
Regards, I follow all of your tutorials on youtube, and every time I thrilled with your knowledge.
Do you have any manual or tutorial for advanced users in your release?
Thx :) - what are you interested in?
Herr Walden, Ich habe eine Frage: Wozu braucht man die diversen lilla/blau Knopfe in GSD? Ich meine, die jenigen, mit "Volume...etwas". Hab noch keine Video gesehen, wo man die benutzt. Ich denke, solche gleiche operationen macht man mit dem Flächen eher im "Part design"?
Hi, diese "Volume" Features, verwendet niemand den ich kenne, deswegen gibt es auch nichts Wissenswertes dazu.
Vielen Dank. Habe ich mich immer gefragt und gewundert. Aber ist besser so :)
Hello Wolfgang, Can you tell me how to set up workbench bar you have at the top of your page that allows you to pick colors and line thickness, etc. I do not have that feature and would like to know how to activate it if possible. Thank you .
VIEW->TOOLBARS->GRAPHICAL PROPERTIES
Très bien, j'aime beaucoup son tutorial...Merci
Merci beaucoup
because section are sweep on along curve or guide
Hello Mr. Walden, when doing the step on 17:21min the coincident line to the point of the symmetry surface recently created I just can't do it because when i get back to the sketch4 the symmetry surface recently created disappears. How can I make it stay there when i get back into sketch4?
The next question I have, What does the extract function does (sound pretty silly due to the word meaning)? What are we extracting when we select the edges and Why?
I really appreciate your time an effort,
+Orl Esp Extracting the edges - a new element is created and it is selectable in the tree. And you should not use the boundaries of a surface directly. Why your symmetry surface is disappering - I can´t tell without your catpart, sorry.
+Wolfgang Walden Thanks for the answer regarding the extracting the edges.
It is disappearing because the sketch4 was created before the symmetry surface, so when i get back to sketch4, it shows is as if the symmetry hasn't been created yet. and i do not know how to edit the tree so i can move the sketch4 after the symmetry. for now, I just created a new sketch (after the symmetry).
I appreciate your comments.
+Orl Esp Seems to me that you are using ordered geometrical sets. You should use geometrical sets.
heyy , I got the same problem too but I found out that you can reorder the features by right clicking on them
right click on sketch4 > sketch4.object>reorder>aftersymmetry.4
In a geometrical set there is no historical order, just plain parent-child releations nothing else
How can i get the elements, prof?
Which elements?
I Mr. Walden. How could you make appear sketches, curves, lines, constraints, etc... on the tree but in blocs? I mean, a bloc of planes, a bloc of curves, a bloc of lines.
Hi, a bloc? You mean a geometrical set?
Yeah, that's right.
@@fernandorodriguezespinoza4649 ->INSERT->Geometrical Set. You could watch my GSD videos ;)
@@wolfgang.walden.cad.training Thank you a lot. Regards from México.
Can you provide any link for the engineering drawing of this ring spanner?
I'm from Brazil, your tutorials are amazing... Ich sprache Deutsch auch...
Thx :). you´re welcome.
but in nx problem how to set this parameters by expression & what is use for guide curve
Mr. Warden can you please do a few tutorials,where you explain various aspects and definitions of the terms used in sweep and daft command in CATIA GSD?? I like your tutorials,but I am unable to understand as to why you entered 90 degree as an angle or what is it meant by "limit curve" and tangency surface".When I use CATIA GSD I am confused by all these parameters,so everytime I start a new project in GSD and if I want to use these commands I have to use the iterative approach,where I experiment will all the commands and don't get desired results.It would be really helpful if you do a few vids on this.
Hi, you know it is all about getting surfaces which are continous at least in tangency.
I will see what I can do.
Wolfgang Walden Ok sir!! :)
Hi sir,
I am learning many techniques from Ur tutorials..
Whenever u use "law" command in CATIA v5 .. I feel unclarity ..
Will u make a special tutorial particularly on the command regarding its uses , purpose, the logic behind the command.. with basic examples .
plz sir
Maybe you should watch the videos in the knowledgeware playlist first?
yes it is flexible geometry model
Thanks for this great tutorial.
Where could be possible to find video tutorials regarding rework from isolated solids and then extract surfaces + untrim and redesigning new concepts? I think this kind of tutorials should be nice also for designing tools . Example: Molding tools or Werkzeuge Kind Regards , Toni
Hi, thx. You mean "reengineering" - I made some short ones. Playlist "catia v5 methodik" - Maybe I can do some. Otherwise try GOOGLE ;)
Wolfgang Walden Thanks, I have a look to your list. The typical examples are always reenginering with point clouds or from scanned surfaces. Best Regards
Great video, but for some reason i don't have the geometrical sets you have in the Tree.
Do you automatically add them through Insert? If so, why is that important?
+snotool Hi, in shape design you have to organize your features yourself in the tree. So it is easier to find errors and to change the model. You have to insert it yourself and give them a proper name.
Great thank you!
Excellent!
One question, how can I create the divisions: reference_elements; sketchs; curves and surfaces?
Thanks, go to->INSERT->GEOMETRICAL SET
Wolfgang Walden thanks! But I'm having problem after doing that. I had create the geometrical set, but when I have one selected I'm not able to see the others. I already checked the hide/show option and they are in show. How can I fix that?
Seems "only current body" is turned on - it is the symbol on the left side of the catalogue/book symbol.
Exact. Thanks!
You´re welcome
in model end point circle sketch along curve normal and sweep by expression
Brother, thank you very much for your videos, can you tell me how you make the tree like sketches, curves and surfaces?
apart from that your tutorials are working perfectly with me. waiting for your reply
"insert geometrical set" ;)
thanks sir, i got it in your videos. Insert>Geometrical set. thanks for the quick reply
You´re welcome.
excellent tutorial
+Rogerio Bernardes Thanks, you´re welcome.
Sir, i see that you already hideyour plane. But what is that lining on the beginning of your drawing? can u teach me how to get that? i can't follow your video becuase i missed the part where you get that line
Please watch my catia v5 basics videos!
question outside of subject. Can youe explain why are additional axis are used in automotive and give maybe any tutorial when it's needed and when you using it ?
+motivated Hi, I ´m not quite sure which additional axis you mean, could you explain please.
Hello Mr. Walden. I am facing one problem while drafting .. the dimensions lines are getting grey colour can You help me out of this
Seems your drawing is not updated. Or you made your dimensioning wrong and lost the references.
thanks sooo much Mr. walden ..i understood my mistake what i did while designing
You´re welcome.
how to organize a tree like this sketch/surfaces/curves....
Just ->insert->geometrical set, insert as many as you want
@wolfgang.walden.cad.training Vielen Dank und ein frohes neues Jahr
sir,how to copy the profile of other part and insert it in some other part...please help me with this....
Hi, you could copy the sketch - just select it, right-click - copy, switch to the new part, select the body and plane - right-click - paste and select the missing external references. You could also go for a powercopy.
i'm getting trouble in splitting....
In splitting? What do you want to split?
actually sir, i want to copy profiled face only rest of the body will be a cuboid....so that the profiled component should rest on my new part in assembly...
THANKS SIR, I GOT IT HOW TO DO IT.....THANKS A LOT
hello sir I am try in pattern but I think this type surface not possible in pattern . please see video last time sent you in proe possible by variational sweep & circle section variable by relation I think same possibly in nx but how to do cicle control by in expression
+H K VERMA I see, yes ion NX you need for example for a helix an expression, it is odd I know. Take a look here: ruclips.net/video/lWNVcZbexl8/видео.html
very nice boss
Thanks :)
When i define to curves the sketch part is missing which is circle 35 dia ?? How to overcome this one...
Hi again, sorry what is your problem?
@@wolfgang.walden.cad.training hello sir
When i do define in work project to the curves , the circle is not showing or indicating which is i already created in sketches ......is it any customize settings prbm ..?
I suppose, only the body/set which is in work is shown. There is a switch in the bottom toolbar to enable/disable - 3 rectangular boxes above one another - disabled / one rectangular box in orange colour - enabled.
@@wolfgang.walden.cad.training thank u sir i got it
@@wolfgang.walden.cad.training i want to ask u one more question sir
upto how much high salary we will get on catia design engg..In india
why don't anyone show the dimensional drawing of the GSD?
Because those drawings look kind of strange
You have mentioned "simple version" this tutorial is in part design module or in GSD?
It is in both of them.
@@wolfgang.walden.cad.training But when u start the tutorial, it is with pard design?
No in the beginning it is the GSD workbench, but it doesn´t really matter, you can switch between those two workbenches effortless.
IM FROM IRAN ....Loved your totorial.THANK you
Great - you´re welcome.
can you make it anchor in generative shape design?
There is already something similar there : ruclips.net/video/MDYNvzTxCHw/видео.html
Thank you so much
You´re welcome
I see when you are setting constraints, your constraint button is always active. Did you do that with a shortcut or is it a higher version of Catia then i have (Catia V5 r17)???
+makrofocus Certain commands can stay active - just activate it with a double klick :)
+Wolfgang Walden HA! Great! This really helps alot! Vielen Dank Herr Walden! :)
+Wolfgang Walden Also, since I have your attention, can you point me to some tips and tricks for Catia(like this one)? Things that are considered trivial but speed up the modeling process and also what to do and what not to do or how to approach modeling in Catia? I have been using Solidworks for most of my engineering life but now I see I have been using the wrong CAD package since Catia is so much more powerful then Solid. I'm really keen on learning as much as possible so anything you can tell me is much appreciated! Again, thank you very much dear sir!
+makrofocus Bitteschön !
+makrofocus Hi, just watch all my videos, especially the basics. If you have any question, feel free to ask. Solidworks has its own advantages. But anyway Catia is still my favourite software.
in proe guide called trajpar this word linked by relation but in nx I am confused
Perfect
Thanks 🙂
hello sir I need some help how to create flexible corrugated pipe model in nx 10 by expression. please help me step by step
+H K VERMA Sorry, I haven´t done pipe modelling in nx yet.
OK sir thanks to reply
I got some idea in proe by you tube in proe this type model creating by variational sweep section control by relation tool. I think i nx possible by expression but confusion is how to do
+H K VERMA If you want to do a sweep - maybe you should consider one of the sections - take a look here: ruclips.net/video/wNcWlJ5qNuI/видео.html
excellent!
+fjavier serna Thx :)
Hello sir I have one doubt to ask??
Please reply.
You should ask, not ask if you can ask ;)
Sir my components are same so I am thinking is it possible that I link a drafting drawing to another part which has nearly same dimensions and shape in catia. So that I do not have to do whole drafting again.
If this could happen then I can save lot of time.
Sorry, that is not possible.
Ok thanks sir.
One more thing your tutorial is more than awesome. I learned lot about CATIA by your tutorial.
Thanks for making useful tutorials.
How to find devloped length for conic hopper
Hi, what the hell is a conic hopper?
Simply think it as frustrum sir
There is no length - if you unfold such an item it would have at least 3 lengths not just one length.
sir please help me this time iam confuse how to do please send a video tips step by step
+H K VERMA Okay, you want it to be flexible, right? I understand your problem now. I will try to make a video.
thank you so much. great
You ´re welcome. I´ve done the SW model as well, video maybe tomorrow.
Wolfgang Walden ok great thanks
thank you!
+두성을 꿈꾸는 용수스 You´re welcome!
Hi Wolfgang Walden, Your videos are really helpfull. Can you please give me some Reverse engineering(Flächenrückführung) video or upload it..Better in English.. Danke..!!
Hi, right now I´m very busy, but I will see if I can do a video, but it will take a while for sure.
sir would u help me teach how to design a pet bottle cap insife threading
hi, there are already some videos in my channel which show the basics - use a sweep and a helix as path. -if you need something special - please mail me drawing.
ok sir thanku
hello.making loud xyz axes ? thanhk you very much
Sorry, what do you mean by "loud xyz axes"? - Tools->options->infrastructure->part infrastructure->register display there is a slider for the size of the axis.
Hello sir can u teach for freshers in simple way
Hi, go to my blog www.walden-wolfgang.de and do the basic training first.
NICE
Thanks :)
great
thx again
please provide me link of catia software crack version sir..
Sorry I don´t have a "crack".
my problem like this model
+H K VERMA That is just an ordinary pattern along a curve - not a sweep.
OK but how to do
+H K VERMA Ok, I will do a video :)
it's model look like helix but actually not a helix shape
+H K VERMA I know, it is similar - look for : archimedic spiral.
You could have increased your voice.. It's very irritating wen it is not audible.
It happens sometimes with the upload to youtube. With my headset it was quite loud.
ok
it's not helix
look like helik