Hi Sir! I have an Apache RTR 180. It's currently on it's 18,000 Km. My bikes Service provider hasn't did any tapped clearance to my bike yet. Now, I can hear a noise like two metals collision inside the engine and I feel like bike start cuts off but it's automatically recovers from it and runs normal. This issue happens very rare. Could you guess the actual problem? Is it related to the tapped adjustment and should I adjust the tapped on my next service? Thank you.
I already taken the caliper off the wheel including the fluid hose. Is there a way to extract the pistons if both a closed? I tried that way the new brake fluid is not moving the pistons. Help me please
Just pump by pressing and depressing brake lever, that will push out the pistons. Or else remove air through purge hole then pump by brake lever, piston will come out
My RTR 160's Float Bowl leaks petrol while riding every morning. Any solution to this? A mechanic replaced a 'Fuel Assange Valve' in it. After 9 months again the leak happens.
My bike is fz s 2011(with kick) how can i adjust the tappet clearence in it bcoz my bike's tappets design appears different from apache as shown in above video
Hey my car engine is running lil rough/Shaking n turning off and making a tapping noise do u think it could be my tappets that's making it run rough n turn off
Brother..I have apache rte 160 2016 edition..noises are coming from the engine side as if I am driving a auto(3 wheeler).. it's too distracting..please suggest me..
brother i need you help....i have bought a new NS200 and it is giving noise in engine so the mechanic suggest me to adjust the tappet....my bike reached 2200 KM jst now so....will it be good to adjust tappet or it could creat the problem after adjuating tappet on 2200 km? pls anwer me quickly....iam sick of this
Bhai, Mare pass Apache 180 hai bs4 (2018), (41000km running) Bhai o 20-25 km aram se chalti hai, Engine garam hone ke bad bike off ho jati hai 2/3 minutes ke bad start hoti hai, fir 1/2 Kilometres chalti hai fir start off jati hai, Kya problem hai, please
hi i have apache 150 cc so far 60k kms done while driving single pick up was gud but in double bike jerks very low pick up very hard to touch 50kmph can u help me
This video was really helpful!
Thank you!! 👍
Is this same for rtr 160 fi 2009?
Super information
Hi Sir!
I have an Apache RTR 180. It's currently on it's 18,000 Km.
My bikes Service provider hasn't did any tapped clearance to my bike yet. Now, I can hear a noise like two metals collision inside the engine and I feel like bike start cuts off but it's automatically recovers from it and runs normal.
This issue happens very rare.
Could you guess the actual problem? Is it related to the tapped adjustment and should I adjust the tapped on my next service?
Thank you.
I already taken the caliper off the wheel including the fluid hose. Is there a way to extract the pistons if both a closed? I tried that way the new brake fluid is not moving the pistons. Help me please
Just pump by pressing and depressing brake lever, that will push out the pistons.
Or else remove air through purge hole then pump by brake lever, piston will come out
can I adjust my rtr 180 2016 model the same inlet 0.08mm and ehaust 0.11mm
What's the tappet clearance for rtr 160 bs4 model ??
My RTR 160's Float Bowl leaks petrol while riding every morning. Any solution to this?
A mechanic replaced a 'Fuel Assange Valve' in it. After 9 months again the leak happens.
Me too facing the same problem. Do you got solution please share with me. I am losing lot of fuel because of this problem.
My Apache tank got leakage due to rust. After fitting another tank and cleaning the bowl the leaking has stopped
My bike is fz s 2011(with kick)
how can i adjust the tappet clearence in it
bcoz my bike's tappets design appears different from apache as shown in above video
great video! very detailed!! thanks a lot!
My apache 160 ka tapped timeing is chaged what i do nw plz tel me ...
Hey my car engine is running lil rough/Shaking n turning off and making a tapping noise do u think it could be my tappets that's making it run rough n turn off
great video.. tnx for sharing.
Brother..I have apache rte 160 2016 edition..noises are coming from the engine side as if I am driving a auto(3 wheeler).. it's too distracting..please suggest me..
Sir without plug compression can created
Hi, no need to create compression, just finding compression stroke
@@mohanr2748 OK...thanks sir
How many km tappet tuning? My bikes Apache 160 2 years old and 8500 km run.
Brother....would u please tell me the size of clearances?
inlet size & exhaust size...
i have apache rtr180. 3rd gear act as neutral. what could be the reason
robie singh change the gear spring
brother i need you help....i have bought a new NS200 and it is giving noise in engine so the mechanic suggest me to adjust the tappet....my bike reached 2200 KM jst now so....will it be good to adjust tappet or it could creat the problem after adjuating tappet on 2200 km? pls anwer me quickly....iam sick of this
Also vibration and slow pick up what i do....
Hello sir Apache 180 ka adjusting kitna hona chahiye or adjusting gej miter kha mil payega
Sir what is clearance of TVS Victor 2003 model
whats value of tvs victor 110cc tapped
sir my apache 160 bike has gone 600km but a sound is comming out from engine ..is there is any problem in the engine ?
Bhai mere pass tvs Apache rtr180 hai Bhai meri bike splendor bike jaisi sound kar rahi h Bhai ..plz help
Bhai, Mare pass Apache 180 hai bs4 (2018), (41000km running)
Bhai o 20-25 km aram se chalti hai, Engine garam hone ke bad bike off ho jati hai 2/3 minutes ke bad start hoti hai, fir 1/2 Kilometres chalti hai fir start off jati hai, Kya problem hai, please
Apache rtr 160 new model tapet intake and exhausted clearance size what?
apache 160......what is the price of new bore
How much time taken to ready
Hello ...sir ..
Meri pass apache 180 hai .jismein engine ki voice kuch jyada aa rahi hai ..
Toh hum kya kare aur kar kar kar ki voice aa rahi hai
what happens once adjusting it.
ما هي أسباب رشة الموتسكل 180 اسناء السرعه
Bhiya mere apache ka engain ka voice badal gaya h Kay karu
I am listening a tack tack sound in my apache rtr 160 when rear wheel is moving. What is the problem?
How to identify intake value and exhaust valve while adjusting tapper clearance
Brother, Where are you from?
Rtr 200 ka kaya hai
great!
Thanks
For RTR 180, standart values are 0.06mm - 0.08mm. And service limits are 0.08 - 0.10mm.
For RTR 150, what are the values?
So which setting will be best
0.07 in inlet and 0.11 in exhaust
@@pronaysaha2953 I only have metric quide. Not the inch one. So, I do 0.05mm and 0.10mm which are closer to these. It works...
any questions relative apache you can ask
hi i have apache 150 cc so far 60k kms done while driving single pick up was gud but in double bike jerks very low pick up very hard to touch 50kmph can u help me
check,clean and adjust the carburettor,check and change/replace spark plug
over vibration also there while in doubles
How to stop the noise of head
inlet 0.6mm and outlet 0.8mm
I Agree With You
0.06 and 0.08 right?
Shahrukh Khan
Agjost.8 inlet.6
Explain it in hindi bro
Brother....would u please tell me the size of clearances?
inlet size & exhaust size...
I have kept clearance of 0.08 for inlet valve and 0.11 for exhaust valve
What Is The CC of your bike?