We really appreciate you taking the time to check out the MOD1! It means a lot to us that you dive into the details and share your honest experience. Your feedback helps us and the community so much-thank you!
@@AndrewDasilvaPLT Dude these are nowhere near overgassed. Geissele is upfront about their gas port sizes and they're not particularly large. They're smaller than *most* companies. The only way you're really going to get smaller gas ports is if you buy a barrel that has a port drilled for suppressed use *only*. The 16" has a .075" but its also a proprietary length that puts it inbetween midlength and rifle length. Keep in mind the further out the gas block is usually you have to open up the port a bit more because the pressures start dropping. Conversely with short barrels like 10.3 or 11.5 you'll start wanting a smaller port. For example their 11.5" is .067" which is basically the sweet spot. It'll run unsuppressed but also be pleasant with a suppressor. I have a 12.5" barrel from them with a .070" port and even that is very soft shooting. It's *significantly* less gassy than my Criterion 11.5" and usually 12.5"s are a little more punchy than 11.5" because of the added dwell time. I just don't see in what world you would say that looked overgassed. He was getting 4 o'clock ejection lmao.
I don't have many firearms but by far the nicest is the 11.5" URGI i got for 950 bucks on black Friday last year. Super42, REBCG, airborne CH all included. Incredible value. Paired with any run of the mill lower and an SSA-E is perfection.
The 10.5 BRN416 just beat it with over 1700 rounds. But the geissele is one of the best rifles on the market. I own two and can attest to their reliability.
@kevinjoseph3183 could you possibly be referring to iv8888 and the self changing pof that went from full auto to 3 round burst/bolt action when it was reaching a critical failure point😂😂??
Accuracy of a rifle is such a subjective thing. I can attest, this rifle is absolutely sub MOA capable. Look at 9 hole reviews. They consistently fired a 9-10 shot group in 1MOA. Depends on the shooter, ammo, weather, your connection to the rifle. So many things. Just wanted to come here and clarify that. Happy thanksgiving yall!
@ considering it’s not a lmg and I’d say so, I’ve never fired over a thousand continuous rounds through my rifle in the span of half a hour, but I have burnt out my 240 barrel, if you are in the military or the civilian world and you need to shoot a thousand rounds through your rifle on continuous automatic in a short time span then you probably have bigger issues then your rifle failing and probably aren’t long for this world
Geissele is just so bad ass. Last time I’m was in the ole parts store I had a DD7 and a GSD setting side by side on the glass ( I obviously made the right decision) The Dang trigger is just so sweet.
Sadly, DD is just getting left behind. Better customer service, but far less quality and reliability. Many DDs even have a great amount of lower and upper wobble. The newest DDs are proving to be a reliability nightmare.
@@derekmclv I've always thought that they were overrated anyways. But I'm even hearing about accuracy issues with BCM too. Right now I'm looking at the Mod 1, a LWRC DI, or the ADM Mod 2.
I completely forgot they had that finish. They just bought a Mod 1 stripped receiver/rail combo second hand and was surprised how smooth it felt. Too bad my lower is a well used, dry looking Aero 😂
I really like the super 42 buffer and spring. The braided spring really dampens the harmonics and gets rid of the twang when the gun cycles. I got it for the durability, but I enjoy it for that small creature comfort.
I just picked this exact rifle for G$$ for $1470 and bought the Caracal 816a2 earlier this year also. I bought the 816 from watching Chris’s video from a while back. Im a big fan of it
These were 970 as complete blem rifles in July. You aren't going to find a better deal for an AR15. People are buying Smith and wesson sport 3s for 600.... I thank all of you that do that so I can get these at 970 with free shipping
Got it like 3 weeks ago from Primary Arms. It was on sale for $1,599. I was debating between this and the DDM4 V7 but the better specs of this out of the box is what led me to choose it in the end. Better flash hider and trigger out of the box and the cold hammer forged bolt was a plus. If there was anything I like better with the DDM4 it was the balance of the gun. It's not front heavy like the Super Duty and balances much better when you're shouldering it. This is a little overgassed compared to my Colt EPR but shoots great. Beautiful rifle too.
Happy thanksgiving! Love all my Geissele triggers,buffer springs and just got an airborne charging handle to try. I’m like Chris,I wanna sticker for my safe. Emailed them asking for just one sticker,within a few days they sent me a big pack of every one.😊
Love this configuration! Accurate, super reliable, only gripe is on balancing, a bit front heavy esp compared to BCM or DD lw barrel contour. Handguard QD spot interferes with top P rail, I placed one at 9
A green with the Keystone Cerakoted red as a homage to the 28th Infantry Division for the 80th anniversary of the Battle of the Bulge. Would be pretty special, Heroes of Hosingen edition.
That Geissele bolt doesn't break. Ask any of the multiple LE agencies , or any others, using them with multi thousand round counts. Any LE related responses to this comment is code for you liking men and BLM. This bolt is what you upgrade to, and I bet it is as durable as the never in stock and overpriced LMT (although i still love almost everything LMT). PS - I love the B5/LMT clone stock, and i don't think you mentioned the "bombproof" gas tube assembly of the Super Duty. Lastly, the Nano coating is a breeze to clean, saving tons of time.
My LMT enhanced BCG and bolt is the crown jewel of my AR. But man are you right on it. Took me a year to get it. I first had to save, then it was weekly/daily checking on the inter webs. Valhalla Tactical for the win on my birthday last year was the ticket. Very worth it however. Not only is the bolt the bees nanners the BCG while suppressed on my block 2 upper is very nice. The gassing is just great, and the fully seated bolt is also a great thing.
We don’t need hard data when we have an aggregate in the tens of thousands. Not one person can show a broken RE bolt. People jump on $G any chance they can, yet we don’t have one example of a broken one.
If anyone is in the market for a Super Duty, a little bird told me they will have some great deals for Black Friday later today 😉 they always send out an email when the deals go live, if you’re signed up for their newsletter.
@4:45 so have they changed to a thick profile barrel?? I have a SD CHF 14.5 barrel tapered barrel, the weight in front is much better as well as a bit more material close to the chamber area. Is this a new improved barrel? The picture looks very similar to an HBAR barrel.
The REBCG that comes in the super duty has a proprietary, directional cam pin that can only be run in the Super Duty upper. When you buy the REBCG as a separate part it comes with a standard cam pin that can be used in either the Super Duty or a standard upper. Just thought Id throw that info out there. Thanks Chris!
I've wanted a complete geissele for YEARS now but sadly I live in Maryland and we're forced to have an HBAR barrel in any rifle 16"+. What's silly is the second you step below 16" and the build becomes a "pistol" I can now purchase practically anything so long as I register it as a pistol..... Ended up going with my first LWRC, the M6IC with mlok rail.
Hot take, but Geissele makes better rifles than Knights Armament. Geissele has slowly progressed to first place in the AR-15 world. Probably some of the best barrels on the market as well. (Don’t destroy me Knight’s boys)
Appreciate the review. Thorough as usual. Will you ever do one on the stag model 8 piston? There are not many, and whenever I show mine to people they are shocked at the cmmg piston system style stag used
Built my upper with MI Nightfighter rail, DD (14.5) with pinned low profile gas block, added BCM BCG and radian charging handle. I'll match it up against this one any day of the week. Oh yeah, cost me less...
Hey Chris, could you tell me where you found this picture at 4:45 of the barrel Geissele is putting in the Super Duty Mod 1? It looks like they updated the taper profile of their barrels for the Mod 1's but I can't find any info on it. Thanks!
doesn't the upper & rail have a special tab to eliminate any chance of rotation? the rail is the male and the upper is the female, so the optic mount may have hidden it from view. also isn't that a 1-10 power optic. Happy Thanksgiving.
I have tried for years to get a new production ArmaLite rifle. Never had the chance to look at one. I wont recommend equipment I don’t have experience with
From what I could find, the barrel material is 4140 not 4150. If you could elaborate on the barrel material it would be much appreciated. I’m sure you have more information on this than I would.
@@cassidybronson6891 Yea I was waiting for some info on that too. Tbh most shooters will probably never see a difference in barrel life, but with 4150CMV as an almost universal standard these days it would be nice to know why they went that route.
I was thinking FN in Columbia SC or maybe even DD made their barrels. Great to know they have CHF machinery. I'm a big Geissele fan. I only run their triggers in my ARs.
Thanks Chris. Great vid, but could you please comment on the Gas System? Dont the 16" Supers have a proprietary "Geissele" gas system length that is somewhere between Midlength and Rifle length? Any noticebale effect on recoil? If this was in there and i missed it im sorry.
Only have 2 complaints with my super duty 1. the stock the one that comes with it is the worst design ever in order to use the storage compartments is to remove the stock to remove the plugs 2 the sling mount on the hand guard is to close to the top rail and prevents the sling swivel from rotating 360 this is me just complaining the rifle is one of the best rifles I have ever carried it was the super duty or a LMT
Wait a second, standard TDP AR-15 bolts aren't forged? I just always assumed.... The receiver is forged, why not the bolt? I recall a few years ago when I was overseas, arfcom was blowing up with issues with the Geissele Super, I believe it was related to the barrel. Any commentary on this?
Can anyone tell me why I’m having such a hard time finding a good lower? BCM seems to only sell parts kits. I tried to buy one from aero, but they won’t ship it to me and I have them on a fraud investigation. I’ve got a BCM upper with no damn lower! Any recommendations of where to get a good deal on a better than PSA complete lower?
To think that I have my CAR 15 from the good old Viet Nam conflict. Full auto and never once let me down. Geissele????/ How about COLT or BUSHMASTER like every Marine carries??
We really appreciate you taking the time to check out the MOD1! It means a lot to us that you dive into the details and share your honest experience. Your feedback helps us and the community so much-thank you!
Just ordered this exact rifle during yalls Black Friday. Lets go guys and get that thing shipped lol
@@PeasantKing-od5lg Why do you say that?
I missed that black Friday sale... still might get one this month if I find a good deal 🤔
My Super Duty is my favorite rifle. Light, accurate, reliable, it would be the first rifle I grab.
10:22 the lack of gas out of the CH/rear receiver is impressive. The G rifle and Huxwerx seems like a real winner. Thank you Chris and Heather.
Ejection port appeared over gassed. Would have liked to of seen an adjustable gas block.
@@AndrewDasilvaPLT Dude these are nowhere near overgassed. Geissele is upfront about their gas port sizes and they're not particularly large. They're smaller than *most* companies. The only way you're really going to get smaller gas ports is if you buy a barrel that has a port drilled for suppressed use *only*. The 16" has a .075" but its also a proprietary length that puts it inbetween midlength and rifle length. Keep in mind the further out the gas block is usually you have to open up the port a bit more because the pressures start dropping. Conversely with short barrels like 10.3 or 11.5 you'll start wanting a smaller port. For example their 11.5" is .067" which is basically the sweet spot. It'll run unsuppressed but also be pleasant with a suppressor. I have a 12.5" barrel from them with a .070" port and even that is very soft shooting. It's *significantly* less gassy than my Criterion 11.5" and usually 12.5"s are a little more punchy than 11.5" because of the added dwell time.
I just don't see in what world you would say that looked overgassed. He was getting 4 o'clock ejection lmao.
@@AndrewDasilvaPLT It's not over gassed at all
I don't have many firearms but by far the nicest is the 11.5" URGI i got for 950 bucks on black Friday last year. Super42, REBCG, airborne CH all included. Incredible value. Paired with any run of the mill lower and an SSA-E is perfection.
My 11,5 inch SD is one of my absolute favorite rifles that I own! Anybody considering this, and that can afford it, should get it sooner than later :)
Been running an 11.5 super duty mod 1 with a Hux 7.62 Ti for a bit now. Absolutely love it!
Walk, Don't Run
@@timrobinson6573😂😂😂 happy thanksgiving 🦃
Have the same and love it..
I think the Super Duty is still the king of the burndowns, probably will stay that way.
The 10.5 BRN416 just beat it with over 1700 rounds. But the geissele is one of the best rifles on the market. I own two and can attest to their reliability.
POF does not agree
@kevinjoseph3183 i guess that's good since we dont care what Shit Tier manufacturers agree with.
@kevinjoseph3183 could you possibly be referring to iv8888 and the self changing pof that went from full auto to 3 round burst/bolt action when it was reaching a critical failure point😂😂??
Accuracy of a rifle is such a subjective thing. I can attest, this rifle is absolutely sub MOA capable. Look at 9 hole reviews. They consistently fired a 9-10 shot group in 1MOA. Depends on the shooter, ammo, weather, your connection to the rifle. So many things. Just wanted to come here and clarify that. Happy thanksgiving yall!
Golden Webb did a burn down of one, impressive, quite impressive
didn't even break a 1000....... real impressive
@ considering it’s not a lmg and I’d say so, I’ve never fired over a thousand continuous rounds through my rifle in the span of half a hour, but I have burnt out my 240 barrel, if you are in the military or the civilian world and you need to shoot a thousand rounds through your rifle on continuous automatic in a short time span then you probably have bigger issues then your rifle failing and probably aren’t long for this world
Geissele is just so bad ass.
Last time I’m was in the ole parts store I had a DD7 and a GSD setting side by side on the glass ( I obviously made the right decision)
The Dang trigger is just so sweet.
Sadly, DD is just getting left behind. Better customer service, but far less quality and reliability. Many DDs even have a great amount of lower and upper wobble. The newest DDs are proving to be a reliability nightmare.
@@derekmclv I've always thought that they were overrated anyways. But I'm even hearing about accuracy issues with BCM too.
Right now I'm looking at the Mod 1, a LWRC DI, or the ADM Mod 2.
@Vladpryde Geissele are MOA. Keep their upper and get a Radian or ADM lower.
Luna Black!
I completely forgot they had that finish. They just bought a Mod 1 stripped receiver/rail combo second hand and was surprised how smooth it felt. Too bad my lower is a well used, dry looking Aero 😂
I really like the super 42 buffer and spring. The braided spring really dampens the harmonics and gets rid of the twang when the gun cycles. I got it for the durability, but I enjoy it for that small creature comfort.
Love my Blemula Mod 1 in OD green. For God and Country 🇺🇸 🦅
No way, I need blem parts odg
Geiselle super duty mod 1 and the new Caracal 816a2 are my go to weapons. Excellent quality
I just picked this exact rifle for G$$ for $1470 and bought the Caracal 816a2 earlier this year also. I bought the 816 from watching Chris’s video from a while back. Im a big fan of it
@@HB-kp6rl What website? I'd love to get this for that price. Or was it Black Friday only?
I may be a unicorn, but I don't think Ambi is that great. I prefer less buttons to snag and/or accidentally push at the exact wrong moment.
These were 970 as complete blem rifles in July. You aren't going to find a better deal for an AR15. People are buying Smith and wesson sport 3s for 600.... I thank all of you that do that so I can get these at 970 with free shipping
This is my exact setup minus the MBUS. 1-10 Swampfox goes perfectly with this
Happy Thanksgiving to Heather and Chris and Family. Thanks for all of the great information over the years.
I always enjoy your videos, first class, never disappointed with Mr. Chris show and tell.
The barrel on these is one of the few well-gassed ones out of the box, in my experience
Awesome rifle! Just ordered my second one a couple hours ago
Got it like 3 weeks ago from Primary Arms. It was on sale for $1,599. I was debating between this and the DDM4 V7 but the better specs of this out of the box is what led me to choose it in the end. Better flash hider and trigger out of the box and the cold hammer forged bolt was a plus. If there was anything I like better with the DDM4 it was the balance of the gun. It's not front heavy like the Super Duty and balances much better when you're shouldering it. This is a little overgassed compared to my Colt EPR but shoots great. Beautiful rifle too.
Happy thanksgiving! Love all my Geissele triggers,buffer springs and just got an airborne charging handle to try. I’m like Chris,I wanna sticker for my safe. Emailed them asking for just one sticker,within a few days they sent me a big pack of every one.😊
Great channel 👏 I picked up a M+M M10X+ because your video gave me some faith. Its been a wonderful rifle so far. THANKS!
Love this configuration! Accurate, super reliable, only gripe is on balancing, a bit front heavy esp compared to BCM or DD lw barrel contour. Handguard QD spot interferes with top P rail, I placed one at 9
A green with the Keystone Cerakoted red as a homage to the 28th Infantry Division for the 80th anniversary of the Battle of the Bulge. Would be pretty special, Heroes of Hosingen edition.
Geissele rifles are under rated !
Overrated
@ nah dude good to go ! I got one for $1300, great rifle !
@@scubasteve743 No, that's DD.
Happy Thanksgiving brother
That Geissele bolt doesn't break. Ask any of the multiple LE agencies , or any others, using them with multi thousand round counts. Any LE related responses to this comment is code for you liking men and BLM.
This bolt is what you upgrade to, and I bet it is as durable as the never in stock and overpriced LMT (although i still love almost everything LMT). PS - I love the B5/LMT clone stock, and i don't think you mentioned the "bombproof" gas tube assembly of the Super Duty. Lastly, the Nano coating is a breeze to clean, saving tons of time.
My LMT enhanced BCG and bolt is the crown jewel of my AR. But man are you right on it. Took me a year to get it. I first had to save, then it was weekly/daily checking on the inter webs. Valhalla Tactical for the win on my birthday last year was the ticket. Very worth it however. Not only is the bolt the bees nanners the BCG while suppressed on my block 2 upper is very nice. The gassing is just great, and the fully seated bolt is also a great thing.
LE are the last people you want to ask about guns.
@@WalterLitwinko Many simply shoot a lot and/or are former military - that's it.
I would love to see hard data on the service life of this bolt.
We don’t need hard data when we have an aggregate in the tens of thousands. Not one person can show a broken RE bolt. People jump on $G any chance they can, yet we don’t have one example of a broken one.
Beautiful rifle, good info. Thanks
Happy Thanksgiving!💪🤙🇺🇲
Good morning 🌞
You forgot to mention how the handguard is keyed to the upper receiver. Solid lock up and will not rotate
If thats a 16” super duty it has the “Geissele length” gas system. Midlength is on the 14.5”.
Happy Thanksgiving, don't forget me at Christmas time.
If anyone is in the market for a Super Duty, a little bird told me they will have some great deals for Black Friday later today 😉 they always send out an email when the deals go live, if you’re signed up for their newsletter.
Just in time for black Friday
Happy Thanksgiving Chris & Heather Thanks For This Awesome Turkey Day Review 😇😀😇 I Love The Super Duty 😀
Aaaaand Black Friday geissele super duty sale right now $1350
Thank you. 👍
@4:45 so have they changed to a thick profile barrel?? I have a SD CHF 14.5 barrel tapered barrel, the weight in front is much better as well as a bit more material close to the chamber area. Is this a new improved barrel? The picture looks very similar to an HBAR barrel.
My favorite rifles
The REBCG that comes in the super duty has a proprietary, directional cam pin that can only be run in the Super Duty upper. When you buy the REBCG as a separate part it comes with a standard cam pin that can be used in either the Super Duty or a standard upper. Just thought Id throw that info out there. Thanks Chris!
@@chiefro7 Really? I'm surprised that wasn't mentioned. Good to know!
@ yeah you can tell the proprietary cam pin because its kind of keystone shaped instead of perfectly rectangular.
Use too not anymore
@@Redbusser40 Since when? We just got a SD in the shop last seek that has it.
Must protect this HOUSE !
I've wanted a complete geissele for YEARS now but sadly I live in Maryland and we're forced to have an HBAR barrel in any rifle 16"+. What's silly is the second you step below 16" and the build becomes a "pistol" I can now purchase practically anything so long as I register it as a pistol..... Ended up going with my first LWRC, the M6IC with mlok rail.
Hot take, but Geissele makes better rifles than Knights Armament. Geissele has slowly progressed to first place in the AR-15 world. Probably some of the best barrels on the market as well. (Don’t destroy me Knight’s boys)
Not a hot take at all, very agreeable. And far better parts availability + and manufacturer support.
POF Base models would give this gun a run for the money.
PERFECT GUN,,THAT AND THE LWRC
happy thanksgiving!
HAPPY THANKSGIVING DAY 🦃
Appreciate the review. Thorough as usual. Will you ever do one on the stag model 8 piston? There are not many, and whenever I show mine to people they are shocked at the cmmg piston system style stag used
At 8:24. It is not a mid-length gas system. It's unfortunately a prorietary "geissele Gaslengt".
Built my upper with MI Nightfighter rail, DD (14.5) with pinned low profile gas block, added BCM BCG and radian charging handle. I'll match it up against this one any day of the week. Oh yeah, cost me less...
Buy Geissele parts on sale. Build cheap.
Hey Chris, could you tell me where you found this picture at 4:45 of the barrel Geissele is putting in the Super Duty Mod 1? It looks like they updated the taper profile of their barrels for the Mod 1's but I can't find any info on it. Thanks!
doesn't the upper & rail have a special tab to eliminate any chance of rotation? the rail is the male and the upper is the female, so the optic mount may have hidden it from view. also isn't that a 1-10 power optic. Happy Thanksgiving.
Should be 25% off this weekend.
Psa has the armalite M153GN18 for 899$ right now best deal on that rifle I've ever seen
I have tried for years to get a new production ArmaLite rifle. Never had the chance to look at one. I wont recommend equipment I don’t have experience with
@SmallArmsSolutions I'd say try it out if you can it's awesome
If one becomes ever available i will
From what I could find, the barrel material is 4140 not 4150. If you could elaborate on the barrel material it would be much appreciated. I’m sure you have more information on this than I would.
@@cassidybronson6891 Yea I was waiting for some info on that too. Tbh most shooters will probably never see a difference in barrel life, but with 4150CMV as an almost universal standard these days it would be nice to know why they went that route.
Chris, does Geissele make their own barrels?
Yes, they CHF them in-house. They make excellent (and accurate) barrels.
I was thinking FN in Columbia SC or maybe even DD made their barrels. Great to know they have CHF machinery.
I'm a big Geissele fan. I only run their triggers in my ARs.
These are legit rifles
Now do Larue
how would you compare the Geissele Super Duty MOD1 to the LWRC IC DI?
Chris are the lowers M-16 cut or are they just considered a low shelf? I’ve recently read there’s a difference between the two.
They are M16 cut.
@@JR15A2
Thanks!
Was this model number 08-395B?
Thanks Chris. Great vid, but could you please comment on the Gas System? Dont the 16" Supers have a proprietary "Geissele" gas system length that is somewhere between Midlength and Rifle length? Any noticebale effect on recoil? If this was in there and i missed it im sorry.
Only have 2 complaints with my super duty 1. the stock the one that comes with it is the worst design ever in order to use the storage compartments is to remove the stock to remove the plugs 2 the sling mount on the hand guard is to close to the top rail and prevents the sling swivel from rotating 360 this is me just complaining the rifle is one of the best rifles I have ever carried it was the super duty or a LMT
Are you going to reach out to geiselle to get the new heavy barrel?
Nah. Of no use to me.
@@SmallArmsSolutionsStill prefer the Centurion Socom Barrel?
How about a Geissele URGI review.
Is that the Luna black model ? It’s not on their website any longer.
Wait a second, standard TDP AR-15 bolts aren't forged? I just always assumed.... The receiver is forged, why not the bolt?
I recall a few years ago when I was overseas, arfcom was blowing up with issues with the Geissele Super, I believe it was related to the barrel. Any commentary on this?
Aluminum parts and FSB are forged on US govt guns. Not any other part
Do you prefer di or piston driven guns?
Why'd you go with the 16" over the 14.5" barrel?
More reliable, higher velocity and you are not married to a pinned device/sbr limitations
Just asking how is the longer barrel (16) more reliable than a 14.7 thanx. FYI I have the 14.7 no problems.
Nfa laws. That's a complete rifle
Best overall performance
@@jonathanhoup9988 Not if it's pinned and welded like it said in the specifications chart that was posted around the 1:34 time frame of the video.
Why does Geissele deliver their semi auto rifles with H2 buffers?
Whats difference between this and their URGI rifle ?
I missed it, what gas system carbine or mid length?
14.5” is midlength, 16” is “geissele length”. (longer than mid, shorter than rifle)
Can anyone tell me why I’m having such a hard time finding a good lower? BCM seems to only sell parts kits. I tried to buy one from aero, but they won’t ship it to me and I have them on a fraud investigation. I’ve got a BCM upper with no damn lower! Any recommendations of where to get a good deal on a better than PSA complete lower?
Vltor complete lower with A5 buffer system, completely ambi, LWRC make the best complete lowers imo and also radian.
Nice
Another video by chris, my day couldn't be any better❤
You quit uploading to rumble?
Finest rifles ever made, and that braided buffer spring is the best single improvement to the AR in the last 20+ years ☝️
Lmaoooo
They put a qd cup in the handguard, screwed on a new grip and muscle device on, and call it a mod 1. So nothing has changed lol
Hand guard is different as well.
@jakesnyder4199 they added a qd socket that you can other side put on for $15, that's not really a change.
To think that I have my CAR 15 from the good old Viet Nam conflict. Full auto and never once let me down. Geissele????/ How about COLT or BUSHMASTER like every Marine carries??
No US soldier ever carried a Bushmaster
Omg
When will there be a review on 6mm ARC ?
I have great difficulty getting the ammo. I would like to though.
a
geiselle is ridiculous not adding ambi features
In before the rails start bending.
??
@ old reference to G rails bending when dropped.
@@UFPTX that was related to USASOC using MK12 gas blocks that were too large. Not a Geiselle issue.
@@TheTorchredz06 rofl- nope. Also the way Bill G handled it by trying to bury the issue comes to mind.
hickok45 sent me👍