No doubt I’m getting it. Too bad LEGO decided to delay it, so now we have to wait longer! And yes, it is the greatest Ep. III set, although you could make an argument for Palpatines Arrest!
this set is so close to being perfect, but it need just a few changes before it’s perfect, but it’s crazy we actually got P2 Cody within the same 30 years as P2 Rex!
The fact that it holds 9 troopers, (7 interior seats, 1 gunner, and 1 driver) and the set comes with 5, means that if I pair it with my Utapau battle pack from 2014, I can fill the whole thing with 212th troopers which is awesome. Works out perfectly.
@@4747jst if your paying for a premium product than you should get a premium product it doesn’t matter if it will only be in a couple sets as “only the best is good enough “ if the prices keep going up so should the quality.
Its a shame it got delayed.. It more of a a shame if it got delayed TWICE! Fun Fact: The Republic Dropship can carry this AT TE if you remove the handle of the AT TE and replace it with the one that attaches to the Dropship.
@@optimised120Yes he's complimented The set and many other several times but You can tell when he complains he complains like a baby in his ATTE comparison video he went on a rant about how the orange tip of the clone trooper printing in this set is slightly cut off by that black line saying and I quote "something LEGO should offer free replacements for" when it's something very minor that has no real effect on the quality of the set and at the end of the day this is just plastic that will soon have no value in the far future. I also personally think he uses Lego's slogan of 'Only the best is good enough' as a crutch to yell his complaints and have some merit of without sounding annoying or obnoxious whether he's right about his opinion or seriously nitpicking
Just that it is a normal gunner, not a heavy gunner.And gunners uses normal P2 helmet, and they never use Antennas or Rangefinders or Sunvisors, so those holes are completely useless and bad looking.
I personally love that they’re adding the helmet holes again. It allows for a lot more customization when making custom clones which has been rather difficult lately without them.
Can I just mention this is the most clone legions in a wave since the mid 2010s? We had the 41st, 212th, shock, wolf pack, 501st, and a few others in the mid 2010s. Now, we have the 501st and 212th again, the P1 clone bois, the 187th, and the Bad Batch. It looks and feels good.
@@kennysfdg471 they aren't clones but they're still troops part of the Republic who came in a battle pack in 2015 Heck I'm pretty sure there's still something I'm forgetting about
A perfect minifigs pack would be 2 regular 212th and a 212th airborn trooper, with a crab droid for the side build. Fingers crossed for the 2023 january sets wave !
I can't believe that in 2022, they release a set with MORE minifigures than they ever have included before. Also it has the best balance between the Separatists and the Clones that I think I have ever seen.
After getting this set in hand, I really don’t think the helmet holes are that bad. They have not been distracting at all the antennae also looks nice where they placed it
@@chilltrooper9423 he sure is. He’s been buying Star Wars sets since the very beginning. I have the manual for the first Star Wars sets like the x wing and darth mauls ship, the old battle packs. All the old sets and newer ones. But now they are all stored in these giant bins we have and we have at least 20,000 Lego pieces, MAYBE.
What I really like about the different weapons racks being detachable is that you can just remove all of those and have four more spots to place Clones.
I think that the option to leave out the jet pack and print it is a pretty good choice because it allows for him to sit in the model. Obviously you could take it off but personally I prefer without it.
If I’m seeing this properly, the printing on the tops of all the helmets appear to differ from what it shown on the box. The 212th trooper is pretty obvious because of the missing point, but I believe Cody’s and the gunner’s printing on top is a bit wider and more spread out than what is on the box. The prints should be closer to the middle than they actually are. I wonder if there is some sort of printing issue with the new helmet, or if Lego just changed the design sometime after rendering the images.
@@MandRproductions what really triggers me with these clones is that on the box the print wraps from on side to the other but irl its squished and makes the clones look like they stubbed their toe.
I have 3 Walmarts in my town. With the new merch coming out in March, I figured it would be a good time to check on clearance sales. One WM still had this @ $140. The other two had reduced it to $112. Both WM that reduced it , put it on clearance. $98 at one, and $83 at the other. I could not resist and had to pick it up for $83
I think a 212th Battle Pack to add to this is likely, especially since they made a new-style Airborne Trooper in 2020 and it's not present here. Maybe they didn't include the Crab Droid here because they're saving it for that set, like how the 2014 212th battle pack had the Tri-Droid?
It really looks like the best Episode 3 set ever to me. Except the missing Palpatine hologram but damn that's a really cool one. I kinda liked the interior of the last sets that came out (the AT-AT playset and its 3 seats cabin), for example for Episode 3 the last AT-AP with its 2 seats and wide target screen was really good. I don't even talk about the last Millenium Falcon that has...Too much space inside ! xD I think Lego finally realized that our little minifigures need a ride and gave them some place inside vehicles. But I really prefered the last clone helmet molds. They were more accurate. These ones look bulky on the forehead sides and the mouth print is quite small.
Its so refreshing to see that LEGO really listened to the customers (for once) and actually used the interior space unlike what we got in the AT-TE before that
Taking a look at 1:42 I'm more and more convinced that 2017 helmet just looks overall way better: better cheek shadows, no holes, more sleek profile and firstly better visor and mouth print!
There are two words I have to say here. HELL YEAH! I actually like this AT-TE because of the return of Commander Cody and the 212th troopers. I don't own the previous AT-TEs (most notably the 2013 version) so this should be a great set I would get and give it a review. I like it!
While the clones don’t use the accessories on the box, they still have them included in the set if you want to use them. Fan service. I guess they can’t please everyone though
I could fill up the whole atte with Obi Wan, the 3 212th clones, the 212th Airborne clone, Commander Cody and the gunner, I could also use it for the Empire! This is the perfect set
I’ve never been more satisfied with a Lego purchase than the UCS AT-AT I love that thing it’s the first UCS set I’ve ever had it’s just amazing to look at in my room and the amount of detail in it and the red visor just everything about it. Well worth the payment
Man I can’t wait for this set. Yeah Cody’s visor is a bit off, but you can always get an accurate visor from CAC (if it fits of course)! Other than that this set is hands down my favorite for the august wave. Obi’s starfighter as well
The buildable figure of Cody was huge so having a dual mold helmet made sense. In my opinion, a dual molded helmet for the Cody minifigure would be hard because of how small the helmet is.
Maybe they went with the clone wars box stripe to drive more attention to the fact that there are clones in the set and maybe that will give the set the attention it needs to sell for all the casual lego consumers out there (people who don't pay attention to accuracy but rather need visual hints to sell them on the set).
Thank you Ryan, after watching your reviews I realized I should only watch your videos! After you release your videos, I have noticed 95% of all other RUclipsrs say exactly what you say like you’re writing the script for them! Your reviews are honest and well done it’s a shame people steal from you! Your content should be your content lol
Great review, Ryan. I’m psyched for this set. Loads of clones and a really nice AT-TE. If they don’t recreate P2 Cody, this set should be worth a ton in a few years. Obviously depending on how long the run is.
I just got this set, and it's a big improvement over the old 2013 model, much more going on in the interior, and it comes with 5 clones instead of a mere 1 that the old one had.
One issue with the set I know which will happen is that it'll be out of stock for months on end. Army building is an aspect of the LEGO Community I dislike as it does make sets impossible to get
Greatest overall! Really wish we’d also gotten a 212th airborne trooper. I know we got one in the Grievous starfighter. But I really love the airborne troopers. Also Ryan as a heads up the Movie had the AT-TE’s scaling cliffs in Teth. Ryloth was at the end of season 1.
If we’re talking inaccuracies, one major inaccurate detail i don’t see mentioned a lot is the cannon in the at-te. The entire cannon is supposed to move up and down, not just the barrel.
@@aleksiniko But it could still be accurate without that piece or even commander Cody for that matter. That’s something you and I would have wanted but it’s not an objective inaccuracy like the cannon, which is something they’ve even done right before. Just because a set lacks a figure, a piece, or even a build, does not make it inaccurate. However when a figure design or build is objective wrong or incorrect to how it’s portrayed in the source material, that is inaccurate. it is a blatantly inaccurate design of the at-te to have the cannon barrel go up and down and not the cannon as a whole.
9,75/10 from me so far (based on this review, I dont own it yet), extremely minor details aside I basically don't see a way they could have done it better, unlike previous at-te's there's just nothing wrong with it, the stuff you and I have problem with is only in context of the past at-tes and that little hole on the helmet.
Man, this AT-TE was an awesome return and upgrade from 2013. I don’t know why the Republic Gunship had to go backwards and not have any small builds for the interior spaces.
I just bought mine 2 days ago. Not done building yet but so far so good. I'm a truck driver and not home much so I buy these when I'm on the road and when the roads are closed cause of snow or I'm waiting 2 days for a load,Legos is what I work on usually
Sadly I don't think they'll be fixing the clone printing anytime soon. Or ever. The Mando helmet has the same issue that the visor is shown higher up but the actual fig is lowered and has been since release. We are stuck with this design which baffles me cause the old print (even shown on your old 212th CW fig) was way better in comparison. "We are supposed to go up, not down" - Obi-Wan Kenobi
This is so awesome I've been collecting funko and hot wheels for about 2 years now Use to collect star wars legos up til 2011 Our house burned down n lost it all Just had a few minifigures that survived cause they were in my backpack at the time I still have my og captain Rex Hope to find some of these new sets to add to my new lego collection Really wanna build up my troopers again Had about 150 back then My grandparents then when they were alive use to always buy me 2 of each Now with twin sons it's gunna be a epic ride to build up this new collection
1:10 No phase II gunner clones do exist. They manned the turbo tanks guns on Kashyyk in Revenge of the Sith. I have an old Star Wars figure of one and you can see them inside the Turbo Tank in the Star Wars Episode III complete cross sections book.
At 10:57 when the clone gunner gets jumpy I replaced the 2 by 3 gray tile he sits on with a 2 by 3 gray plate so he stays in place when I move him around.
The 2014 style p2 clone troopers looked so much better, I still want these clones but they look awful compared to the 2014 ones. The part I hate the most is the cheek part on the helmet along with the eye visor part is not as stretched out.
Bought this set at the beginning of the month on Amazon. Set arrived last night and it love it. Yeah, the helmet holes not being filled in is annoying, there’s an inaccurate print on top of the helmet, and there should’ve been a crab droid, but those are the only real flaws. And NONE of them are about the AT-TE build itself. I’d probably also give the set a 9/10 but it was a really fun build and looks so cool on display
there is enough room, if you have the 501st battle pack, to fill the at-te with the 501st and 212th figures. I'm excited for this set. Out of the 10+ years of collecting, I haven't gotten one and in the beginning of this year I was hoping one would come out, and it did. Feel like we should of gotten an actual episode III Kenobi, like what we should of gotten with General Grievous' starfighter.
Same. I'm honestly pretty disappointed that we got a phase 2 Cody now and not in the future whenever LEGO realises that the new Clone style is trash and goes back to the 2014 one. I still can't believe they actually approved the ugly design for the 501st troopers.
Agreed. I also would have wanted LEGO to make brand new helmet mold for Cody. I didn't expect them to make just holes in the sides. But still I love like the concept and the armor printing. Very nice figure to be added in to my collection.
So, I’ve never been a big army builder, however, the excitement around this and phase 2 Cody inspired me to go out and get a 501st battlepack to test the waters, and my wallet is sad to say that I’m now hooked.😂 I’m already planning to buy more 501st, and I plan to buy this as soon as possible. Please pray that I don’t convince myself to buy a second one, my wallet can’t take it🤣
This will be available for a couple of years so no need to rush to buy a second one. Maybe get one now and wait to see if there's a battlepack that comes out.
@@DarthMalaks_Missing_Lower_Jaw Probably not where I live. The 501st has been in stores since late 2020/early 2021. So if that’s any indication, it’ll be a few months before it shows up in stores, but I think it’ll be pretty well stocked at my local targets by February
After 6 years of being broke, I’m now 19 with a part time job and full time education. With that said, I have finally bought one of my dream sets, which is this ATTE that is coming to my doorstep next week.
@@aleksiniko I feel like battlepacks shouldn't include named characters because they're used as army builders and if someone buys a bunch of battlepacks they'll have a lot of duplicates of that named character, so a microfighter would make more sense for Commander Cody.
@@Bealls68 yes. But it is likely that Lego would quit making new micro fighter sets. And if that's so then it is likely that lego would either make a battle pack or a 40 dollar set that contains Commander Cody. Lego said that making expensive sets that contain hard to get Minifigures is not right. That's why they made the clone fighter tank and ph 1 clone trooper battle station sets.
The stripe nitpick is… quite the nitpick. I honestly quite like the orange stripe, it fits the color palette of the box art as well as the theme (212th) of the set. A blue stripe would’ve stuck out like a sore thumb. I’m not sure this is the reasoning for the orange stripe I’m satisfied nonetheless.
Just got the set. Really cool, but one issue. One of the clone helmets is heavily misprinted. Only one of the two grey things on the side actually has grey printing, the other is the black outline but it’s just white there. And the grey decay printing on the helmet is absent. I’m assuming that this is because they ran out of grey ink like halfway through printing it. Very disappointed, but I have other 212th troopers so I swapped out the helmet. Overall 10/10 build, but very disappointing minifigures for £140. I’d recommend the build, but you might wanna buy some spare 212th parts to swap out, as there’s a high chance one- or more of the clones will be misprinted.
Is this the BEST LEGO Episode 3 set ever? Will you be copping? BUY IT NOW: amzn.to/3d2yhxZ (Affiliate Link)
Maybe the best, but my favorite is Palpatine’s arrest
Definitely!!
No doubt I’m getting it. Too bad LEGO decided to delay it, so now we have to wait longer! And yes, it is the greatest Ep. III set, although you could make an argument for Palpatines Arrest!
Not at $140. It’s a good set. But not good enough for $140.
I think it’s pretty close but palpitnes arrest is a bit better for me
this set is so close to being perfect, but it need just a few changes before it’s perfect, but it’s crazy we actually got P2 Cody within the same 30 years as P2 Rex!
@Jοe Biden When you have a set as close to perfection as this one, the nitpicks are more obvious
@Jοe Biden thank you for your input, mr. Former Vice President.
@@KadeStro90 He’s the incumbent President tho lol.
@Jοe Biden but the helmet holes look atrocious and why on earth didn’t they include a crab droid
Rex Y wing would be perfect
Anyone else think that this would have been the perfect set to reintroduce the super battle droid?
(Raises hand)
You're not alone
Why not leave this set alone as a dedicated clone set, and put the SB2 in a set dedicated to CIS droids?
@@bluehero-96 See, "only the best is good enough" only applies when they say it does.
If they had a wearable design that didnt have the legs snap
The fact that it holds 9 troopers,
(7 interior seats, 1 gunner, and 1 driver)
and the set comes with 5, means that if I pair it with my Utapau battle pack from 2014, I can fill the whole thing with 212th troopers which is awesome. Works out perfectly.
I have that same pack as well lol. thanks for the idea
I had this exact idea yesterday! I have the battle pack too so I’m rlly excited to be able to fit my entire 212th Battalion inside the walker
I have two of them so if i end up getting 2 of these i can fill up both
Just recently bought 2 212th battlepacks off ebay in preparation for this set, can't wait!
🤣
The clone trooper vibrating violently in the gunner's seat is one of the funniest things I've seen this year.
💀💀
Same thing happened back with the 2013 model
It seems like the stud shooters are placed really well. It’s not super distracting and I think it works
I'll still remove them but yeah i agree
@@kuj2209 when there not loaded it looks decent but still prob take it off
It helps that they blend in really well with the design and the studs don't stick out like on the old stud shooter
I think if they removed the lower bump on the side of the clone helmet it would make the accessory holes significantly less awkward
it would have been better if they just made the bump higher
@@4747jst no they just shouldn’t have cheaped out and made a new visor mould
@@omarbaba9892 that wouldnt really be worth it since its for 1 figure thats probably never going to come out in another set in the next few years
@@4747jst if your paying for a premium product than you should get a premium product it doesn’t matter if it will only be in a couple sets as “only the best is good enough “ if the prices keep going up so should the quality.
@@4747jst "only the best is good enough"
Its a shame it got delayed.. It more of a a shame if it got delayed TWICE!
Fun Fact: The Republic Dropship can carry this AT TE if you remove the handle of the AT TE and replace it with the one that attaches to the Dropship.
Lol yes if you modify the set to work with the other set it will work with the set it doesn’t work with!
@@MandRproductions that was a mouthful
If only we could get a Remastered dropship with AT OT
@@BlessMichael411 agreed
@@BlessMichael411 it would be like 800$ bruh
5:30 you failed to mention they included his scar, a very visible way to distinguish Cody from other clones
Yes
I put the blade hair on my Cody figure so he has his short hair when he's unmasked
Yeah, that would require praising lego for something, all MandR knows how to do is whine
@@MothbeanHe complimented the set many many times throughout the video 😂
@@optimised120Yes he's complimented The set and many other several times but You can tell when he complains he complains like a baby in his ATTE comparison video he went on a rant about how the orange tip of the clone trooper printing in this set is slightly cut off by that black line saying and I quote "something LEGO should offer free replacements for" when it's something very minor that has no real effect on the quality of the set and at the end of the day this is just plastic that will soon have no value in the far future. I also personally think he uses Lego's slogan of 'Only the best is good enough' as a crutch to yell his complaints and have some merit of without sounding annoying or obnoxious whether he's right about his opinion or seriously nitpicking
Honestly the gunner Looks good with the holes from the front because it makes it look bulky and like a real heavy gunner
True.
Just that it is a normal gunner, not a heavy gunner.And gunners uses normal P2 helmet, and they never use Antennas or Rangefinders or Sunvisors, so those holes are completely useless and bad looking.
Especially if you put a grey visor on him
@@noahmaldonado5461 yeah to punch the canon and GAR in the face once again..
@@fenyx044 hey I'm just taking advantage of a feature Lego gave us
I personally love that they’re adding the helmet holes again. It allows for a lot more customization when making custom clones which has been rather difficult lately without them.
But the way they implemented then looks awful
Can I just mention this is the most clone legions in a wave since the mid 2010s? We had the 41st, 212th, shock, wolf pack, 501st, and a few others in the mid 2010s. Now, we have the 501st and 212th again, the P1 clone bois, the 187th, and the Bad Batch. It looks and feels good.
Senate commandoes, even p2 geonosis troops which I'm not even sure if they're cannon
@@noahmaldonado5461 Technically the Senate commandos were not clones, but I see where you're going.
@@kennysfdg471 they aren't clones but they're still troops part of the Republic who came in a battle pack in 2015
Heck I'm pretty sure there's still something I'm forgetting about
@@noahmaldonado5461 Does Commander Neo count from the 91st? I feel like he's one we're forgetting.
A perfect minifigs pack would be 2 regular 212th and a 212th airborn trooper, with a crab droid for the side build. Fingers crossed for the 2023 january sets wave !
I think that would be perfect as a remake of the 2014 212th battle pack
Genuis right here
I’d put another clone in there
absolutely
@@eliminator1472 but LEGO wouldn't
I can't believe that in 2022, they release a set with MORE minifigures than they ever have included before. Also it has the best balance between the Separatists and the Clones that I think I have ever seen.
After getting this set in hand, I really don’t think the helmet holes are that bad. They have not been distracting at all the antennae also looks nice where they placed it
Great set, definitely could've included an airborne trooper and crab droid to make it 10/10 but other than that it's amazing
Maybe also Palpatine hologram piece for Cody
Airborne would be so much better than the gunner
My dad bought like 8 212th battle packs from like 2015 when I was young so I have more than enough troopers to fill this beast when I get it.
@@JamesGames3 your dad is the best
@@chilltrooper9423 he sure is. He’s been buying Star Wars sets since the very beginning. I have the manual for the first Star Wars sets like the x wing and darth mauls ship, the old battle packs. All the old sets and newer ones. But now they are all stored in these giant bins we have and we have at least 20,000 Lego pieces, MAYBE.
What I really like about the different weapons racks being detachable is that you can just remove all of those and have four more spots to place Clones.
Oh thats true
I think that the option to leave out the jet pack and print it is a pretty good choice because it allows for him to sit in the model. Obviously you could take it off but personally I prefer without it.
But why would you put such an amazing character inside the at-te and not have it out on display
@@Verdun16Because kids play with it
If I’m seeing this properly, the printing on the tops of all the helmets appear to differ from what it shown on the box. The 212th trooper is pretty obvious because of the missing point, but I believe Cody’s and the gunner’s printing on top is a bit wider and more spread out than what is on the box. The prints should be closer to the middle than they actually are. I wonder if there is some sort of printing issue with the new helmet, or if Lego just changed the design sometime after rendering the images.
That too, it’s super spaced out from the fin.
I think they are gonna fix it like the print error on obi Wan in the Vader vs kenobi set for reviewers
Lego seems to have massive problems with alignment on anything that is curved in more than one direction.
@@MandRproductions what really triggers me with these clones is that on the box the print wraps from on side to the other but irl its squished and makes the clones look like they stubbed their toe.
The most hyped set of the year is here! 🔥 What’s next after Phase 2 Cody I wonder…
P2 Rex I would hope
@@gorillatube3363 yep
YOU ARE EVERYWHERE AND IS DRIVING ME CRAZY
Slave Leia 4th edition!
@@Jumpyyyyyyyyyyyyyyyyyyyy that means he is a Lego fan
I built this set yesterday, i 100% agree it is so good and very fun to play with
I didn’t expect the AT-TE to be as flourished as it is, it’s generally a solid build with pretty great figs. Def the best set of this wave.
We finally got a Phase 2 Commander Cody. That's all that matters to me
I have 3 Walmarts in my town. With the new merch coming out in March, I figured it would be a good time to check on clearance sales. One WM still had this @ $140. The other two had reduced it to $112. Both WM that reduced it , put it on clearance. $98 at one, and $83 at the other. I could not resist and had to pick it up for $83
The climbing at the wall was not at Ryloth, but at Teth.
Wierd how such a CW simp made that error
🤓
This set is just about perfect. By far my favorite set and I’d been wanting an AT-TE forever when it released. Great job Lego!
I think a 212th Battle Pack to add to this is likely, especially since they made a new-style Airborne Trooper in 2020 and it's not present here. Maybe they didn't include the Crab Droid here because they're saving it for that set, like how the 2014 212th battle pack had the Tri-Droid?
This set will make a fine addition to my collection when i'll actually be able to get it.
It really looks like the best Episode 3 set ever to me. Except the missing Palpatine hologram but damn that's a really cool one.
I kinda liked the interior of the last sets that came out (the AT-AT playset and its 3 seats cabin), for example for Episode 3 the last AT-AP with its 2 seats and wide target screen was really good. I don't even talk about the last Millenium Falcon that has...Too much space inside ! xD
I think Lego finally realized that our little minifigures need a ride and gave them some place inside vehicles.
But I really prefered the last clone helmet molds. They were more accurate. These ones look bulky on the forehead sides and the mouth print is quite small.
Yh the interior is great but I can’t believe they flopped so hard with th justifier interior
@@heisenberg6142 i didn't buy this set yet, quite expensive for me even if it's quite a big boy.
I'm quite amazed by the Scythe interior though.
Its so refreshing to see that LEGO really listened to the customers (for once) and actually used the interior space unlike what we got in the AT-TE before that
Taking a look at 1:42 I'm more and more convinced that 2017 helmet just looks overall way better: better cheek shadows, no holes, more sleek profile and firstly better visor and mouth print!
Yeah! I dislike the newest mouth print. I think it should be thinner but still I like the whole minifigure.
There are two words I have to say here. HELL YEAH! I actually like this AT-TE because of the return of Commander Cody and the 212th troopers. I don't own the previous AT-TEs (most notably the 2013 version) so this should be a great set I would get and give it a review. I like it!
I like how the gunner jumps around while turning the cannon because it looks a bit like recoil from the cannon
Too funny I had the same thought
Can’t wait to get my hands on this set. The three battle droids look awesome 😎
Such a good army builder for my battle droid army!
Yes and this set is amazing its perfectly and the minifigs are balanced
When i looked at the box art and realized the helmet prints are different than what we go i thought i was going crazy
While the clones don’t use the accessories on the box, they still have them included in the set if you want to use them. Fan service. I guess they can’t please everyone though
This is my DREAM lego set. Probably might get it for Christmas or my birthday
This set is a true master piece , can't wait to get one myself .
I could fill up the whole atte with Obi Wan, the 3 212th clones, the 212th Airborne clone, Commander Cody and the gunner, I could also use it for the Empire! This is the perfect set
I'm not a prequel guy myself, but this set looks pretty awesome and something I'd actually want from that trilogy!!!
Episode 3 is great. The other two are kinda mid
I think that this is actually a perfect set! Although of the printing quality issue, it’s really worth it, both minifigures, and the At te itself.
It looks ok but the front looks really old school for a new set.
I’ve never been more satisfied with a Lego purchase than the UCS AT-AT I love that thing it’s the first UCS set I’ve ever had it’s just amazing to look at in my room and the amount of detail in it and the red visor just everything about it. Well worth the payment
Man I can’t wait for this set. Yeah Cody’s visor is a bit off, but you can always get an accurate visor from CAC (if it fits of course)!
Other than that this set is hands down my favorite for the august wave. Obi’s starfighter as well
The buildable figure of Cody was huge so having a dual mold helmet made sense. In my opinion, a dual molded helmet for the Cody minifigure would be hard because of how small the helmet is.
Drinking game: take a shot every time Ryan says “in years past”
Maybe they went with the clone wars box stripe to drive more attention to the fact that there are clones in the set and maybe that will give the set the attention it needs to sell for all the casual lego consumers out there (people who don't pay attention to accuracy but rather need visual hints to sell them on the set).
"...and then some caution, or like, I'm an AT-TE watch out...lights, I guess."
that was so funny, don't ever change, Ryan, I love you bro
i wonder if the handle on top will be used for a new LAAT gunship to carry it and drop into the battle
Thank you Ryan, after watching your reviews I realized I should only watch your videos! After you release your videos, I have noticed 95% of all other RUclipsrs say exactly what you say like you’re writing the script for them! Your reviews are honest and well done it’s a shame people steal from you! Your content should be your content lol
This is now my favorite SW set and I’ll be trying to get it the day it releases! That interior is just so good and I can’t wait for the comparison!
I love this new AT-TE walker, all of the minifigures are amazing and I like the spiderdroid
Great review, Ryan. I’m psyched for this set. Loads of clones and a really nice AT-TE. If they don’t recreate P2 Cody, this set should be worth a ton in a few years. Obviously depending on how long the run is.
Ack! That darn spider droid again! If only we had a crab droid… So close!
I just got this set, and it's a big improvement over the old 2013 model, much more going on in the interior, and it comes with 5 clones instead of a mere 1 that the old one had.
I got this Lego set for Christmas and I loved it. But it took me 5 hours to build...
One issue with the set I know which will happen is that it'll be out of stock for months on end.
Army building is an aspect of the LEGO Community I dislike as it does make sets impossible to get
That’s why I’m staying up until midnight here in the uk! 18 minutes to go!
The battle that has AT-TEs scaleing a cliff is not the battle of Ryloth, rather the battle of Teth.
Greatest overall! Really wish we’d also gotten a 212th airborne trooper. I know we got one in the Grievous starfighter. But I really love the airborne troopers. Also Ryan as a heads up the Movie had the AT-TE’s scaling cliffs in Teth. Ryloth was at the end of season 1.
Finally ordered mine! Can't wait. Kid-me inside is screaming with joy! This was one I always wanted but never got growing up.
If we’re talking inaccuracies, one major inaccurate detail i don’t see mentioned a lot is the cannon in the at-te. The entire cannon is supposed to move up and down, not just the barrel.
Yeah that was my main issue with the 2013 set. Shame they didn't fix it here.
I think it's fine. The order 66 scene can be made with only the barrel moving up. But still Lego should have put a palpatine hologram into the set.
@@aleksiniko But it could still be accurate without that piece or even commander Cody for that matter. That’s something you and I would have wanted but it’s not an objective inaccuracy like the cannon, which is something they’ve even done right before. Just because a set lacks a figure, a piece, or even a build, does not make it inaccurate. However when a figure design or build is objective wrong or incorrect to how it’s portrayed in the source material, that is inaccurate. it is a blatantly inaccurate design of the at-te to have the cannon barrel go up and down and not the cannon as a whole.
This is going to be a certified hood classic set in 2 years because of Cody
9,75/10 from me so far (based on this review, I dont own it yet), extremely minor details aside I basically don't see a way they could have done it better, unlike previous at-te's there's just nothing wrong with it, the stuff you and I have problem with is only in context of the past at-tes and that little hole on the helmet.
The amount of times Ryan says “in years past” is impressive
I got this for Christmas and im so excited about it. Its awesome!
The visors (imo) have the ability to completely kill a named clone like VGHn he looks so average and is hard to separate from a regular trooper
Who else thinks it should have been a crab droid
Me
Man, this AT-TE was an awesome return and upgrade from 2013. I don’t know why the Republic Gunship had to go backwards and not have any small builds for the interior spaces.
I'm so glad that your review is out!! I'm so excited for Cody! But those helmet holes 💀
Tbh, I don’t take much issue with the clones, I think they look fine
But the placing of the attachment port is a little distracting
The 2008 one could be propped up on its hind legs, but the two grey slope pieces on the back panel would usually break off
I just bought mine 2 days ago. Not done building yet but so far so good. I'm a truck driver and not home much so I buy these when I'm on the road and when the roads are closed cause of snow or I'm waiting 2 days for a load,Legos is what I work on usually
Sadly I don't think they'll be fixing the clone printing anytime soon. Or ever. The Mando helmet has the same issue that the visor is shown higher up but the actual fig is lowered and has been since release. We are stuck with this design which baffles me cause the old print (even shown on your old 212th CW fig) was way better in comparison.
"We are supposed to go up, not down" - Obi-Wan Kenobi
its a lego set at the end of the day
This is so awesome
I've been collecting funko and hot wheels for about 2 years now
Use to collect star wars legos up til 2011
Our house burned down n lost it all
Just had a few minifigures that survived cause they were in my backpack at the time
I still have my og captain Rex
Hope to find some of these new sets to add to my new lego collection
Really wanna build up my troopers again
Had about 150 back then
My grandparents then when they were alive use to always buy me 2 of each
Now with twin sons it's gunna be a epic ride to build up this new collection
Man, if they keep Cody exclusive to this set…. Retirement will go REALLY WELL for this set
1:10 No phase II gunner clones do exist. They manned the turbo tanks guns on Kashyyk in Revenge of the Sith. I have an old Star Wars figure of one and you can see them inside the Turbo Tank in the Star Wars Episode III complete cross sections book.
imagine we get a drop ship + an at-ot (even if they are seperate) next year and your able to use the drop ship with the at te too. would be amazing
I see gunner shaking in chair as a cool Play featire. Like he is getting whole magazine at once go and gun recoil is shaking whole seat
I'm nine years old and I am trying to get this set! I already have 102$ 😃
1. That’s so amazing, keep saving!
2. If you’re nine, you shouldn’t have a YT channel (I think RUclips terms of service says you need to be 13)
My brother said this on my account haha I am 13 and he is 9. He actually brought the set and is so happy with it
You could get it in England for 88.99£
At 10:57 when the clone gunner gets jumpy I replaced the 2 by 3 gray tile he sits on with a 2 by 3 gray plate so he stays in place when I move him around.
The 2014 style p2 clone troopers looked so much better, I still want these clones but they look awful compared to the 2014 ones. The part I hate the most is the cheek part on the helmet along with the eye visor part is not as stretched out.
Am I the only person who noticed the front left side sticker was upside down? I had too look multiple times to make sure I wasn’t seeing things.
How did u make a 6 minute review of just the Mnifigures
Lego investors trying not to get mad at figures for being slightly inaccurate
Bought this set at the beginning of the month on Amazon. Set arrived last night and it love it. Yeah, the helmet holes not being filled in is annoying, there’s an inaccurate print on top of the helmet, and there should’ve been a crab droid, but those are the only real flaws. And NONE of them are about the AT-TE build itself.
I’d probably also give the set a 9/10 but it was a really fun build and looks so cool on display
there is enough room, if you have the 501st battle pack, to fill the at-te with the 501st and 212th figures. I'm excited for this set. Out of the 10+ years of collecting, I haven't gotten one and in the beginning of this year I was hoping one would come out, and it did. Feel like we should of gotten an actual episode III Kenobi, like what we should of gotten with General Grievous' starfighter.
God damn daddy,you don't know how much I waited for this review
I am all for clone troopers, but I still think the 2014 version of the phase II clones looks waaaay better 🥲
Same. I'm honestly pretty disappointed that we got a phase 2 Cody now and not in the future whenever LEGO realises that the new Clone style is trash and goes back to the 2014 one.
I still can't believe they actually approved the ugly design for the 501st troopers.
Finally someone said the Helmets print error 🙌 👏 about Time! All other reviews were trying to avoid the subject. Thanks M&R 👌
This is the most hyped set this year! Hopefully now after Phase 2 Commander Cody they can make a new and updated Phase 2 Captain Rex!
Yes! I would love to get Captain Rex next. Maybe Commander Fox after Rex!
@@aleksiniko Yeah! That sounds like it would be amazing!
The best Lego set ever released
I think, this is the best clone set we got in 4 years, but i also think that the Helmet holes could be better.
Agreed. I also would have wanted LEGO to make brand new helmet mold for Cody. I didn't expect them to make just holes in the sides. But still I love like the concept and the armor printing. Very nice figure to be added in to my collection.
I’ve been saving since I first saw this I need it in my collection set is immaculate and it has my favorite clone legion I’m so hyped
So, I’ve never been a big army builder, however, the excitement around this and phase 2 Cody inspired me to go out and get a 501st battlepack to test the waters, and my wallet is sad to say that I’m now hooked.😂 I’m already planning to buy more 501st, and I plan to buy this as soon as possible. Please pray that I don’t convince myself to buy a second one, my wallet can’t take it🤣
This will be available for a couple of years so no need to rush to buy a second one. Maybe get one now and wait to see if there's a battlepack that comes out.
@@DarthMalaks_Missing_Lower_Jaw they’d be stupid not to release a 212th legion/battlepack set to go with this at-te
@@DarthMalaks_Missing_Lower_Jaw Probably not where I live. The 501st has been in stores since late 2020/early 2021. So if that’s any indication, it’ll be a few months before it shows up in stores, but I think it’ll be pretty well stocked at my local targets by February
@@DarthMalaks_Missing_Lower_Jaw does it mean i do not have to worry about the at te being sold out, where Can i find out when particular sets retire?
After 6 years of being broke, I’m now 19 with a part time job and full time education. With that said, I have finally bought one of my dream sets, which is this ATTE that is coming to my doorstep next week.
I absolutely love the 212th troopers. One of my favorite clone legions and I'm excited to make an army and use them in my Mocs.
What I do dislike about the figures is that they are more clone wars accurate than they are episode 3 accurate.
Agreed. I wish they'd bring back the 2014 style of Clones.
I hope phase 2 Cody comes in something cheaper like a micro-fighter down the line.
Lego might make a 212th trooper battlepack that contains airborne trooper or Commander Cody.
@@aleksiniko I feel like battlepacks shouldn't include named characters because they're used as army builders and if someone buys a bunch of battlepacks they'll have a lot of duplicates of that named character, so a microfighter would make more sense for Commander Cody.
@@Bealls68 yes. But it is likely that Lego would quit making new micro fighter sets. And if that's so then it is likely that lego would either make a battle pack or a 40 dollar set that contains Commander Cody. Lego said that making expensive sets that contain hard to get Minifigures is not right. That's why they made the clone fighter tank and ph 1 clone trooper battle station sets.
Man for the most part I've lost out on those clone wars sets but having the coruscant guard gunship and this really helps to fill that void in my soul
The stripe nitpick is… quite the nitpick. I honestly quite like the orange stripe, it fits the color palette of the box art as well as the theme (212th) of the set. A blue stripe would’ve stuck out like a sore thumb. I’m not sure this is the reasoning for the orange stripe I’m satisfied nonetheless.
A nitpicks are valid flaws... and for 140 dollars, there shouldn't be printing errors and/or false advertising to this magnitude
@@timewarpdrive77 Yeah, but it's lego, what do you expect?
@@jawajuice31 I expect them to make a quality product... which is an expectation thats regularly subverted
@@timewarpdrive77 OK, you have a point
@@jawajuice31 “OnLy ThE bEsT iS gOoD eNoUgH”
Just got the set. Really cool, but one issue. One of the clone helmets is heavily misprinted. Only one of the two grey things on the side actually has grey printing, the other is the black outline but it’s just white there. And the grey decay printing on the helmet is absent. I’m assuming that this is because they ran out of grey ink like halfway through printing it. Very disappointed, but I have other 212th troopers so I swapped out the helmet. Overall 10/10 build, but very disappointing minifigures for £140. I’d recommend the build, but you might wanna buy some spare 212th parts to swap out, as there’s a high chance one- or more of the clones will be misprinted.
I can’t wait for this set! Too bad LEGO decided to screw us over and delay it without telling anyone!
How'd you get screwed over, I'd love to try and help