I love seeing trash to treasure vidios and love to see things rebuilt and reused! Way to go! I'd love to hear them. It seems everyone only knows to throw away and get new but now a days built quality isn't worth a crap with most items, so yeah, wishing certain things
@@wmp0074 The Sony subs did have dual spiders and we’re probably built better but my original comment had nothing to do with performance just the looks
@@K-Effect I was just giving my opinion that the original cone looks better because of it's unique design compared to the round cone and thick surround. I did post another comment about not using 2 spiders but that wasn't direct towards you. Nobody is wrong though. You think it looks better and I don't. Just two different opinions :P
Those are excellent subs. Had them wired to a taramps 3000HD and it was freakin incredible. They never blew up and I drove them hard. Got them in a elite 2x12 box in my van now parralelled to 2 ohm and a small 250 watt amp and they still pound like nuts.
Nice reimagining, but: 1. The real working power is 300 W - attentive viewers saw this on their own sticker. This is the true maximum operating power at which the speakers will work and not burn out! 2. The boxes are too small for such speakers and you can't get a normal sound from them! 3. Painting for rust is a bad idea! Good luck! (=
19:27 I would have used a wire wheel on an angle grinder to that rust instead of sandpaper, It would have came out a whole lot nicer because you would have gotten rid of 100% of the rust down to the bare metal like you should have And then you should have primed the metal before you sprayed it. other than all that it came out pretty good. though I am a little bit disappointed that they are no longer Sony Xplōde subwoofers anymore😢
Gran trabajo pero para hacer los videos menos pesados creo que no es necesario mostrar como se lijan una por una cada una de las piezas de madera (minuto 7:18)
Excelente vídeo tutorial, lo que si recomiendo es, envovinarla bien. Por que sonaba con Rose, lo que significa que el centro magnético donde se coloca la bobina, estaba sucio en el momento de amarlo
Exactamente, yo por empezar corregiría muchas cosas, en la canasta del parlante ni siquiera le saco bien el óxido que quedó después de lijar y pinto sobre eso, en un tiempo se le despega el centrador y el cono juntos. El parlante de fabrica trajo doble centrador y el solamente puso uno pudiendo haber aprovechado el otro espacio y ponerle los dos, otra es que la bobina se queda muy chica para lo que es la suspención, y ya siendo un poquito más detallista, el cubre polvos ni siquiera está bien en el centro
As someone that has re-coned a great many woofers, 1,000 watt woofers do not come with stamped metal frames. It would be cast metal. Those vents under the bottom spider should be covered with cloth to prevent dust from constantly getting drawn into the magnet around the voice coil. If Sony didn't have air filters on those then it is a design flaw.
The rust on the baskets needed to be neutralised. You can’t just spray paint over the top. After making a nice cabinet you totally f’d up the driver restoration.
Good job Guy ;oP It would really be a plus if in the description you write the names of the products used and their references :o) Your Vlog would thus also become a tutorial ... ;o)
Нехватает нейлонових защит в переди штоб д намики прикрити немножки а так довольно не плохо ,когда впереди есть защита они виглядят более багаче елегантние 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
@@michaelrosenberg2420 , Glad you spoke up about the acetone. Do you have any idea what kind of adhesive he used when he was reassembling everything? I imagine there are a few different workable options.
I love seeing trash to treasure vidios and love to see things rebuilt and reused! Way to go! I'd love to hear them. It seems everyone only knows to throw away and get new but now a days built quality isn't worth a crap with most items, so yeah, wishing certain things
В пр роз
Great job. Only tip I would give is to secure the speaker wire terminals on the subwoofers better to where they are not moving. Thanks for the video
They look 10x better than the original Sony
Nicht wirklich.
Doesn't look better than the original pentagonal cones. Just looks like a generic chinese market subwoofer now.
@@wmp0074 The Sony subs did have dual spiders and we’re probably built better but my original comment had nothing to do with performance just the looks
@@K-Effect I was just giving my opinion that the original cone looks better because of it's unique design compared to the round cone and thick surround. I did post another comment about not using 2 spiders but that wasn't direct towards you. Nobody is wrong though. You think it looks better and I don't. Just two different opinions :P
@@wmp0074 I completely understand. I never met any disrespect, I can come across very blunt but I really don’t mean too
One of the real restoration video🙏👍👌
Bro Iam from India I like very much your restoration give you a big like and all the best .
Bravo suonatore vufer bassi ❤👍✔️
Those are excellent subs. Had them wired to a taramps 3000HD and it was freakin incredible. They never blew up and I drove them hard. Got them in a elite 2x12 box in my van now parralelled to 2 ohm and a small 250 watt amp and they still pound like nuts.
了~
、！
Sure. Coz real work power is 300W and PEAK power is 1100W just peak power!
Parabéns, excelente trabalho!
Jozz❤
Now I know what I should have been learning in school maybe I would have my own business now.
I am amazed that you can always get the replacement parts! As always, very well done.
Industry and concert poroducts get replacements, consumer stuff not so much
Wow totally rebuilding where u get the replacement pieces u literally destroyed the original parts it’s all new 🤔
Класса получилось продолжай также делать!!!
Excellent
This was incredibly satisfying to watch.
thank you
Супер сабвуфер Сони на 50вт
Скотч и упаковка дороже чем то что внутри :)
Согласен) ну там не 50w там рмс 300где то пик 600w
Niceley done. I didn't know those old sony's had a dual spider.
Amazing restoration 🎉🎉
SONY MAKES THEYRE OWN SUBWOOFERS, I HAD A PAIR, 100 WATTS EACH, MATCHED WITH MINI SPEAKERS, SOUNDED FANTASTIC, COULD SHAKE THE ROOF *
Thank you for leaving in the sound of the router at 11:25 - 13:30
I love this product ❤
These came out awesome 👍
Nice reimagining, but:
1. The real working power is 300 W - attentive viewers saw this on their own sticker. This is the true maximum operating power at which the speakers will work and not burn out!
2. The boxes are too small for such speakers and you can't get a normal sound from them!
3. Painting for rust is a bad idea!
Good luck! (=
I'm truly impressed! Good work!
A wire wheel would be so much easier than the sand paper. Great job though 👏
Evaporust
Good job brother 👍
Excelente trabalho. Parabéns.
Good job bro.i think you can make box nice finished with putty
Nice 👌 👍
That poor little green router still takin the abuse. Love it
19:27 I would have used a wire wheel on an angle grinder to that rust instead of sandpaper, It would have came out a whole lot nicer because you would have gotten rid of 100% of the rust down to the bare metal like you should have And then you should have primed the metal before you sprayed it. other than all that it came out pretty good.
though I am a little bit disappointed that they are no longer Sony Xplōde subwoofers anymore😢
Maybe 2 in 1 paint, or epoxy.
Nicely done
Gran trabajo pero para hacer los videos menos pesados creo que no es necesario mostrar como se lijan una por una cada una de las piezas de madera (minuto 7:18)
19:30，除锈，可以放入热水中，加柠檬酸（很便宜），煮沸
Super 😊
Very good job this music is great 👍👍
Good look better than Sony original speaker 🔊
Excelente vídeo tutorial, lo que si recomiendo es, envovinarla bien. Por que sonaba con Rose, lo que significa que el centro magnético donde se coloca la bobina, estaba sucio en el momento de amarlo
Exactamente, yo por empezar corregiría muchas cosas, en la canasta del parlante ni siquiera le saco bien el óxido que quedó después de lijar y pinto sobre eso, en un tiempo se le despega el centrador y el cono juntos. El parlante de fabrica trajo doble centrador y el solamente puso uno pudiendo haber aprovechado el otro espacio y ponerle los dos, otra es que la bobina se queda muy chica para lo que es la suspención, y ya siendo un poquito más detallista, el cubre polvos ni siquiera está bien en el centro
Better then they originally were lol
Bad ass man did a great job
ASMR repair😊
Man I wish I had those skills
Круто , подсоединение только , у меня денамик 250 ват там на пружинках
Nice 👍👌 02/02/2023 🇮🇳
Jabarjast
This was really cool! Thanks!
❤ great
Totally impressed
Hmm ? And where did you get a new membrane, because the old one was torn?
It's a rebuild kit. You buy it new. DiY cheaper than buying new subs. Also good way to design better subs from old junk.
As someone that has re-coned a great many woofers, 1,000 watt woofers do not come with stamped metal frames. It would be cast metal.
Those vents under the bottom spider should be covered with cloth to prevent dust from constantly getting drawn into the magnet around the voice coil. If Sony didn't have air filters on those then it is a design flaw.
Skar SVR and many other 1000- 2000 watt plus woofers come with stamped metal baskets.
Nominal power is just 300W.
@@pdr5926 svr not sdr
wow que lidos esos sorround krenwood no sabia que existian saludos desde argentina
If u use a standard paint roller you could save that spary paint and do it all in one step
Hay quá anh, anh có thể làm cho mình 1 vỏ thùng sub thô không?
4:30 brother what's that solution you're using? please let us know, subscribed
X2
The rust on the baskets needed to be neutralised. You can’t just spray paint over the top. After making a nice cabinet you totally f’d up the driver restoration.
hello what is the name of liquid you put to tear off the glue in the speakers?
Nice job and video thanks for sharing.
👍👍👍👍👍 bu cür təmir bizim ölkədə niyə yoxdu🇦🇿
Your cable too small will you...?
This subwoofer need 4 mm cable...!
use bigger cauge wires. Otherwise excellent job
Gostei muito , so um detalhe eum conselho , bota os fios mais grosso no alto falante so isso , bom trabalho ai
Quedaron espectaculares.
Thanks :) maybe I can have decent speakers now that I can repair my own.
just buy some 8inch DS18s or SKARs
Bravo a terrific job 👍
Ja com vocês no RUclips é rápido e prático, nem esquenta os componentes de tão rápido é a solda
Te quedaron muy bonitas
Very nice
They look pretty damn good 👍
Amazing yr 😍
Job well done, keep it up
Very nice bro 👍
❤❤👍👍
Nice job 👍 but I think it's just a replacement and repair not restoration...
Show ameizing
You forgot to doubled the speaker damper to make a hard bass.
Very nice work broo
Good job Guy ;oP
It would really be a plus if in the description you write the names of the products used and their references :o)
Your Vlog would thus also become a tutorial ... ;o)
Nice❤👍
kawał pięknej pracy
Supersatisfactorio Gracias
У нас разные понятия о реставрации.
У нас бы это назвали - рукожопство
Или колхоз.
@@78RSI не обижайте колхоз
Always use MDF boss.Always!
what is that liquid/solvent you are using to remove the cones / diaphragms etc ?
Tight 👍🏾
Did you replace with the original parts?
Ну лаадно, иии тааак сойдёт😁
Top!!!!!!!!🤗🤗🤗🤗🤗
Нехватает нейлонових защит в переди штоб д намики прикрити немножки а так довольно не плохо ,когда впереди есть защита они виглядят более багаче елегантние 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
Nice
What's the solution that remove paint
what are the drivers you have put on the top ? any links to them please?
0o0
Super!!!
Hello a.e cũng có loa rời như thế này mong a đóng lại e có được không
I need this but no money 😭😭😭😭🥺
Kitne chahiye buddy?
Thanks 🥺
Why only use one spider? The bottom one makes the voice coil more stabilized. Former will probably jump gap now.
The technical term is spider for the piece that supports the voice coil.
@@frankorandle Corrected, thanks! Now answer the question. lol
Bomba kimidi bu video baxsın hamı
recomendo um par de JVC full range 3" pra complementar as frequencias medias e agudas do sistema
Whats that liquid he uses dor the glue?
Nice job.
What you are using to peel off parts?
Prob gasoline
@@crxxpslvyr7887 Nope Acetone
@@michaelrosenberg2420 , Glad you spoke up about the acetone. Do you have any idea what kind of adhesive he used when he was reassembling everything? I imagine there are a few different workable options.
Any idea on where I can get parts to recone subs that are 2.5 inch voice coil and under?
Black karpet or black paint which is better ?