Worked for me. Thank you very much. from South Africa
2 года назад+3
My tests have shown that "Fan NG" is rarely due to a defective fan! Rather, its cheap connector is responsible for this, as it loses contact with the pin on the motherboard over time and due to temperature fluctuations. This is especially noticeable with the blue cable, which transmits the signal of the fan control (or not, then see Fan NG). Here you can unplug the connector from the motherboard, clip the metal pins out of the connector with a fine slotted screwdriver and use a small pair of pliers to bend the very cheap metal back together a bit tighter so that it ultimately closes tighter around the pins of the motherboard again. Very simple solution to an insanely common problem.... Optionally, you could of course solder a standard fan connector on the motherboard and replace the fan accordingly, then should be even longer peace.
Hello Friend ! his technique was accurate, I just did it and it worked very well, I'm from Brazil, thank you very much for your knowledge, it helped me a lot !!
Lions Kingdom Lions Kingdom i tried but i don t find, my model is mx fs8000 , not mx hs 8000 but seems exactely the same. I search this pin 76 for a lot of time but i don t find, i tried to zoom on your video but nothing. I found the zone where is but i can t understand which is the exactely point
mano min de uma dica meu Samsung jiga sonud de 2600 vatis estar só xiando. é na tela dele aparece booting sound .isso aconteceu depois q eu coloquei á antena do rádio. é já tentei de tudo. reiniciei como você fez no vídeo mais nada adiantou
Hello, good afternoon. I have a mx-hs8500. I do that procedure and it does not solve. Well the problem with my computer is that it turns on and then says protect bye and turns off
If it says protect could be the AMP, POWER SUPPLY, OVER HEATING. With the unit unplugged and fully discharged. Measure the resistance between the negative and positive of each speaker output jack. It should read around 2.2K ohms. If it's way off then the problem is in the amp section.
I have a MX-HS8500 and it doesn’t turn on , it worked perfectly fine but then would turn on and then turn off by itself right away and now it doesn’t turn on at all.
Worked for me. Thank you very much. from South Africa
My tests have shown that "Fan NG" is rarely due to a defective fan! Rather, its cheap connector is responsible for this, as it loses contact with the pin on the motherboard over time and due to temperature fluctuations. This is especially noticeable with the blue cable, which transmits the signal of the fan control (or not, then see Fan NG). Here you can unplug the connector from the motherboard, clip the metal pins out of the connector with a fine slotted screwdriver and use a small pair of pliers to bend the very cheap metal back together a bit tighter so that it ultimately closes tighter around the pins of the motherboard again. Very simple solution to an insanely common problem.... Optionally, you could of course solder a standard fan connector on the motherboard and replace the fan accordingly, then should be even longer peace.
Fix my fan NG as per video works 100 percent Thanks so much saved me couple of Rands I'm from SA
Yes I just did it and it works thanks for share this helpful information
Hello Friend ! his technique was accurate, I just did it and it worked very well, I'm from Brazil, thank you very much for your knowledge, it helped me a lot !!
You're welcome friend..
Boa tarde Lucas tudo bem amigo tenho um som fxs 8000 dar certo esse champe. Tem como vc mandar a foto do champe no teu som.
@@claudemirchagas7458 ? english pls
I wanna try this, thanks a lot.
O meu MX fs8000 está mostrando Protec quando aumento o volume até 24 ele desliga
Estou com aviso de protect quando aumenta volume e desliga... pode me ajudar? Grato...
What gauge wire did you use?
Its a normal wire. You can use any kind of wire
@@Deepztech and how did you know the resistance of the wire to be 100 ohms?
@@sirvirgenprince8571 no need to measure the ohm, just use a normal wire
Mx hs 9000 goes into protect mode any suggestions?
Will this work for Samsung giga 4000 watt hi fi system ? I’m getting no sound to speakers on anything like the radio, Bluetooth aux or CD player
Whats the model number
Or do you know how to fix my issue
Is there a resistor I need to replace ?
It doesn’t play any sound at all
Mx-jjs9500
MX-JS9500
I’m not having any fan issues or codes
Only sound won’t play for any function
There are a lot of people with my problem for this model
But no one has given a solution Anywhere
From the video i didn t see well the right point. Thanks very much
Pin no. 76
Lions Kingdom Lions Kingdom i tried but i don t find, my model is mx fs8000 , not mx hs 8000 but seems exactely the same.
I search this pin 76 for a lot of time but i don t find, i tried to zoom on your video but nothing. I found the zone where is but i can t understand which is the exactely point
Send me an image
@@Deepztech please I have fs8000 and it'd same issue
@@engineernelson3732 chack the path
Hello can someone help me with my problem? My Samsung MX-FS9000 Giga Sound System doesn’t work. It says hello but eventually turns off.
try to turn on without your speakers
Oi. Eu tenho um desse. O meu. Ta se desligando sozinho q eu lg. I q pode ser. Vc pode mi ajuda
envie-me um videoclipe do seu problema (
se você pode usar inglês)
Eu estou com um som com esse mesmo problema oque poder ser?
check the path
Do you know how to reset the Bluetooth it just stays on wait and don’t go to ready
During “No Disc” Displayed, push the stop Button 5 seconds. After displayed ‘INITIALIZE’ set
will power off automatically
O display do sansung fs8ooo não mostra os nome apago mas a luz está acesa
En contraste el problema de tu samsumg gigga
Yo tengo el mismo problema
HOW TO FIX FAN NG ERROR mx-js9500 giga sound system
Can i you show how you exposed the motherboard?
i cant get you
Can you help my mx-ms8500 won't stay on
any error messages on the display?
Mano onde compro esse fio amarelo.?
contact me on facebook
Hi will this work on HTF6500
can u send me a picture of mainboard ? whatsapp +94771586656
How about for HT-J5500W?
mano min de uma dica meu Samsung jiga sonud de 2600 vatis estar só xiando. é na tela dele aparece booting sound .isso aconteceu depois q eu coloquei á antena do rádio. é já tentei de tudo. reiniciei como você fez no vídeo mais nada adiantou
aparece algum erro no visor?
Hello, good afternoon. I have a mx-hs8500. I do that procedure and it does not solve. Well the problem with my computer is that it turns on and then says protect bye and turns off
Was this issue ever resolved cause mine does that exact thing
What is the error code?
@@Deepztechprotect
Check amplifier side voltage is present or not
@@Deepztechwhat do I need to look for
What does it mean if it says protection then shuts off
If it says protect could be the AMP, POWER SUPPLY, OVER HEATING. With the unit unplugged and fully discharged. Measure the resistance between the negative and positive of each speaker output jack. It should read around 2.2K ohms. If it's way off then the problem is in the amp section.
Estou com ploplema com esse som alguém poderia me ajudar
so im try but not work
Check the fan
O meu Som tbm ta assim , como faço pra arrumar
explique mais
I have a MX-HS8500 and it doesn’t turn on , it worked perfectly fine but then would turn on and then turn off by itself right away and now it doesn’t turn on at all.
is it displays any error messages ?
Lions Kingdom it wouldn’t display any errors, it just turned off and it no longer turns on . It’s been off for I could say 2 years probably .
@@ricardomancera5968 Check your power supply output voltages all of fist.
Quanto é pra vc arrumar?
Eu sou do Sri Lanka
Tem como vc arrumar o meu
certo. Posso te ajudar
What is real power? 137w?
What do you mean by power? Power consumption or amplifier output wattage?
I have the same error in my model mx-fs9000 can you please help me with details
sure. contact me on WhatsApp +94771586656
Mx fs9000 looking for the resistor pin but not sure.
Can you help out?
@@Deepztech can you help me out with mx-fs9000
NO SIRVE ESTE EQUIPO NO ME DURO 4 MESES
i can't understand your language