are you doing plumbing with that because that's the only time where that might make sense With electrical stuff never in hell should you bring salt and acid near it, far too much damage to save nothing
@@WalyJimenez-cq9mqо мой бог, живëм в век интернета и "что это за кислота?" Ортофосфорная 75%, для пайки меди, аллюминия, нержавеющие стали, цветных и чëрных металлов.
@@Eliectron а пассивный только не даёт появляться оксиду на поверхности после прогрева. Так что ничего ни с жалом, ни с изделием плохого не делает. Активным - алюминий паяют, например, потому что нужно и старую оксидную плёнку на поверхности снять и новая чтобы не образуовалась на воздухе пока греется место спайки.
@@Görkem-x5hand by simply adding some solder to the tip of the iron when you are done and ready to put the iron away, you can easily replace the zink coating to preserve the tip.
Most or all soldering wire comes with Flux already. Though if you're soldering with wire or metal without the embedded flux that would help. Or if you're trying to undo soldering jobs.
Although flux is important. It isnt 100% needed. However the type of solder makes a huge difference. Just like you used two different solder composition. Don't know why people can't just demonstrate something without doing some janky shenanigans. 😮💨
pour beaucoup de soudures on l'utilise. de nos jours il est même incorporé dans le centre du fil de soudure (ce qui crée un dépôt brun-noir) il a fait exprès de faire des blobs de soudure tout prêts et les nettoiyer du flux qu'ils avaient sinon sa démo n'aurait pas bien fonctionné.
The opposite is true, that's what flux is for. It cleans corrosion and fat from the surface so the solder can bond to the metal instead of sitting on the dirt. Also the flux spreads the heat before the solder melts and keep everything from forming an oxide coating that would prevent everything from sticking together. It can help to melt the solder quick and easy. Fiddling around for too long can spread heat to things you don't want to heat up and also form an oxide layer on surfaces that are not covered in flux, so quick soldering is good practice. For some soldering techniques, like when soldering SMD components, you pretty much flood he whole area of your component with flux, so that everything will heat up evenly and nothing oxidizes. Flux is also used to clean up heavily and corroded or broken terminals and routes prior to the actual repair. Soldering without flux is in almost all cases like driving a car without tires....basically possible but pure lunacy.
Firstly the part youre soldering to was warmed up after the first try soldering to and secondly if you use fresh soldering wire it got flix in it already its flux cored wire
Depending on what you are doing the flux from the core can be way too few and/or evaporate way too fast. Also there are a lot of different types of flux and they usually don't mix well so it might be better to get fluxless wire to combine it with the flux from your collection, instead of having collections of both.
من سازنده ویدیو نیستم و از ایران جواب به سوال شما رو دادم .بله جوهر نمک رقیق +پوسته فلزی باطری های 1/5V استفاده شده از این هم بهتر هستش فقط موقع انداختن پوستهای فلزی داخل جوهر نمک در فضای باز این کار را انجام بدید چون بخار دارد بعد حتما در داخل ظرف شیشه ای اینکار انجام بدید چون در زمان واکنش گرم میشود بعداز حل شدن بی خطر هستش و به داخل ظرف پلاستیکی یا قطره چکان انتقال دهید
اسید رقیق یا جوهر نمک +پوسته باطری های استفاده شده از این روغن فلکسی مخلوط با اسید و نمک حتما بهتر و ارازانتر است فقط موقع مخلوط کردن و دروست کردنش باید مواظب بخار حاصله بود چون بخارش کمی خطرناک هستش
Скорее всего это они залудили алюминий, где можно в место флюса изпользовать каплю масло, чтобы перекрыть доступ кислорода. Чтобы алюминий не покрывался оксидной плёнкой.
То чувство что у тебя есть много видов флюса и ими ты пользуешься всеми Например: кислоту для закисших проводов , а смолу для паяльника, а пастообразные флюсы для плат (Но если они не справляются я использую кислоту НО ЭТО ОЧЕНЬ ОПАСНО)
Но коробочку для припоя и канифолю лучше делать из дюрали. Эта точно не залудится. А ещё лучше из тефлона, как у меня... а нержавейка лудится без проблем.
Also having the blade warmed from melting the first puddle of solder helps. Having a surface closer to the soldering temp will have it flow better and have a better joint
I have never heard anyone call flux a lotion in all my years of soldering.
Puts the lotion on its pcb
Deve ser perfumado! 😂😂😂
Fine, what would you like to call it?
@@prashanth105 Flux
@@prashanth105Lötflussmittel! 😂
Just be like us germans and make it more complicated
"It takes the flux lotion, and puts the flux lotion on the spatula!"
How its made
😂😂
Or else it get’s the tin beads again.
Slapablejerk?
🐐🐐🐐🐐🐐
But why you changed solder wire 😂😂😂
😊
Сплав Розе или Вуду
the stupid question in the world..
if you don't know anything about electronics..better you shut your big mouth,bro..and just be calm..
@@Hotang398 then "smart man" explain us why he changed soldering wire?
@@endershadow1912that has nothing to do with it kid
Citric acid + salt + water.....1:1 water to dissolve sufficiently, its works for me
Do make sure you wash this off after
@@camforman yes, because it makes iron rust faster
are you doing plumbing with that because that's the only time where that might make sense
With electrical stuff never in hell should you bring salt and acid near it, far too much damage to save nothing
@@MaxC_1 You can rub it with cotton wool on the area where the tin will be applied, this will reduce damage to the unwanted area
does that work for watch batteries, If I wanna solder onto them instead of spot weld them.
Чудо, спустя 50 лет они узнали что такое паяльная кислота и флюсы!!!
🤣🤣🤣
El milagro es que soldo estaño en acero
@@WalyJimenez-cq9mq тут ключевое слово "кислота", а с ней всë спаять можно. 🤗☝👍
@@Kentak_Gaikala gran pregunta es ,que tipo de acido es?
@@WalyJimenez-cq9mqо мой бог, живëм в век интернета и "что это за кислота?"
Ортофосфорная 75%, для пайки меди, аллюминия, нержавеющие стали, цветных и чëрных металлов.
Это даже не Капитан очевидность, это Адмирал ясен х*й😂
Адмирал Какого хуйа
Чел буквально показал как использовать флюс, при том что это и так то что знает любой человек которому надо что-то припаять
нафига она бесполезную железку залудила?
Не берет если да же флюс, бери кислоту, если нет бери аспирин!
@@YURA-или ацетил
Yeah a PCB is probably the best choice as an underlay.
I was waiting for “haan yehaan kadam kadam par lakho hasina hain ” 😂😂😂😂
Same 😂😂
Me 2😂
This shit probably funny asf 😂😂
Mai toh gane lag gya tha bhai 😂😂
Simplest short to show the main application of Flux 💯
Soldering flux name..? Please
Liquid flux
Flux Brand and model? Reference?
Power soildering leqeuid pest
rosin flux
go learn spelling 🗿@@amitkhan6350
Everyone else: “What is this sorcery?!”
EE’s: 🤨
see comments, it's closer to "no one" actually.
@@666neoselen Seems like there are just no EEs here, only DIY blobb producers
Me waiting for :
Haa yaha kadam kadam meey!😂😂
Флюс миру открыл, как мы без этого то жили.. Гений
active flux spoils the zinc coating of the soldering iron.
А пассивный?
@@Eliectron а пассивный только не даёт появляться оксиду на поверхности после прогрева.
Так что ничего ни с жалом, ни с изделием плохого не делает.
Активным - алюминий паяют, например, потому что нужно и старую оксидную плёнку на поверхности снять и новая чтобы не образуовалась на воздухе пока греется место спайки.
soldering tip is a consumeable so it is ok.
@@Görkem-x5hand by simply adding some solder to the tip of the iron when you are done and ready to put the iron away, you can easily replace the zink coating to preserve the tip.
@@Görkem-x5hу него просто нет столько денег.И на припой и на флюс и на электричество для паяльника 😂
Why didn’t you use the same bead of solder though 🤨 makes me wonder if the second bead is a better solder or something
Most or all soldering wire comes with Flux already. Though if you're soldering with wire or metal without the embedded flux that would help. Or if you're trying to undo soldering jobs.
Although flux is important. It isnt 100% needed. However the type of solder makes a huge difference. Just like you used two different solder composition. Don't know why people can't just demonstrate something without doing some janky shenanigans. 😮💨
They gotta harvest some extra awe points to help them feel more relevant than they really are.
The forbidden Ice Cream Spoon 😅
भाई ने गाने की याद दिला दी 👉👉👉👉
👉हां यहां कदम कदम पर लाखों हसीनाएं हैं😅
What name of flux?
I don’t care about this video I just like the little arrow that says “SMD” pointing at the guy
Very good display of why flux is needed during soldering.
Which flux is used ??
Flux name please?
En carrosserie on utilisait également du flux mais en pâte, pour preparer la tôle à l'etamage, qui est un excellent antirouille
pour beaucoup de soudures on l'utilise. de nos jours il est même incorporé dans le centre du fil de soudure (ce qui crée un dépôt brun-noir) il a fait exprès de faire des blobs de soudure tout prêts et les nettoiyer du flux qu'ils avaient sinon sa démo n'aurait pas bien fonctionné.
А обязательно на плате это все делать?
請問這是什麼?看起來不像焊錫膏,是一樣的東西嗎?
what is name of this please
А вот провод так лучше не залуживать, а то от кислоты он меньше прослужит.
What soldering iron tip are you using?
Does the flux etch the surface how does it make it stick honestly
Please what is the name/brand name for it
Почистить наждачной для сцепления?????
Já utilizo isso a muito tempo, chama se gota mágica tem no mercado livre, Aliexpress e Banggood.
Doesn’t give flux a more wors solder connection than a solder connection with only tempeture heated connection?
The opposite is true, that's what flux is for. It cleans corrosion and fat from the surface so the solder can bond to the metal instead of sitting on the dirt.
Also the flux spreads the heat before the solder melts and keep everything from forming an oxide coating that would prevent everything from sticking together. It can help to melt the solder quick and easy. Fiddling around for too long can spread heat to things you don't want to heat up and also form an oxide layer on surfaces that are not covered in flux, so quick soldering is good practice.
For some soldering techniques, like when soldering SMD components, you pretty much flood he whole area of your component with flux, so that everything will heat up evenly and nothing oxidizes.
Flux is also used to clean up heavily and corroded or broken terminals and routes prior to the actual repair.
Soldering without flux is in almost all cases like driving a car without tires....basically possible but pure lunacy.
Also using flux core solder helps.
Flux lotion name please?
The magic of flux
oh look! there is a magical potion called flux that helps tin to stick to things!
I use phosphoric acid for soldering to battery tabs.
Oh, didn't think I would find something that helpful here, thanks.
Haven't tried soldering batteries much, maybe I just didn't get them hot enough.
Is there a flux to soler aluminum at lower temp. Please suggest
you need a solder meant for aluminum. usually these have indium or bismuth
@@42468 can you send me a link for it please
What is the name of this flux
Firstly the part youre soldering to was warmed up after the first try soldering to and secondly if you use fresh soldering wire it got flix in it already its flux cored wire
Depending on what you are doing the flux from the core can be way too few and/or evaporate way too fast. Also there are a lot of different types of flux and they usually don't mix well so it might be better to get fluxless wire to combine it with the flux from your collection, instead of having collections of both.
Not saying, but I am, by using that second button it looks like you are using a different metal that flows easier.
Ok, but how does it taste?
Much like Elmer's white glue.
I was just soldering earlier and couldn't get it to stick for nothing in the world I need some of that stuff
Its just regular flux
We don't have flux in my country, is there any other alternative?
من سازنده ویدیو نیستم و از ایران جواب به سوال شما رو دادم .بله جوهر نمک رقیق +پوسته فلزی باطری های 1/5V استفاده شده از این هم بهتر هستش فقط موقع انداختن پوستهای فلزی داخل جوهر نمک در فضای باز این کار را انجام بدید چون بخار دارد بعد حتما در داخل ظرف شیشه ای اینکار انجام بدید چون در زمان واکنش گرم میشود بعداز حل شدن بی خطر هستش و به داخل ظرف پلاستیکی یا قطره چکان انتقال دهید
I find it really hard to solder on watch batteries will this special flux make that possible?
What are you using
What is the name of this oil?
Why not use the same soldering led?
Liquid rosin?
Can i have the name exactly of the soldering machine ?? And what about the hot gun can you reply ?
Кислотный флюс, возможно что ортофосфорная кислота. Жало паяльника придётся покупать новое
Yes 😂
Brother ! Low ph flux can damage your iron tip
it's puts the lotion on its solder joints or it gets the hose.
اسید رقیق یا جوهر نمک +پوسته باطری های استفاده شده از این روغن فلکسی مخلوط با اسید و نمک حتما بهتر و ارازانتر است فقط موقع مخلوط کردن و دروست کردنش باید مواظب بخار حاصله بود چون بخارش کمی خطرناک هستش
請問,那罐溶劑是甚麼呀?🤔🤔
Lotion?
what's that oil looking thing he added?
the flux i use is butter like and not cooking oil looking. I know that's flux.
Это очаровательно - наблюдать, как люди на ютубе раз за разом открывают для себя паяльные флюсы 😂
What is that? What is the name?
Lotion???
Que tipo de metal é utilizado nesse tipo de solda?
Kansa liquid hai
What is the point of putting solder on a pincer?
Solution made of muriatic acid and lead from a dry cell battery?
So the metal sticks better with this music playing?
what a products name soldering add, please
So where can I find these?
Product name?
Name music??
Levitating (feat. DaBaby), by Dua Lipa.
It sounds like an older song that I was looking for instead...
@@jamesdavis9462 , thanks, I also had this question )
Wch flux is tht ?
Must be good for the skin
Ahhhhhh no damn wonder my solderingbwas Shyte 😂😂😂😂needed flux....who knew❤
A few magic words could t hurt either.
What? So u have to use FLUX? CHIT! NO WAY! 😂 ME TOO
I want to buy online pls share link
Cheap AA batteries cover in acid makes flux.
howmach price
Скорее всего это они залудили алюминий, где можно в место флюса изпользовать каплю масло, чтобы перекрыть доступ кислорода. Чтобы алюминий не покрывался оксидной плёнкой.
ماهوا نوع السائل المستعمل
в серную кислоту кидаешь цинг до завершения реакции , вуаля - ортофосфорная кислота
I was waiting for :- ha yaha kadam kadam pe lakho hasinaye h😅😅😂
Comment s'appelle ce produit ?
То чувство что у тебя есть много видов флюса и ими ты пользуешься всеми
Например: кислоту для закисших проводов
, а смолу для паяльника, а пастообразные флюсы для плат
(Но если они не справляются я использую кислоту НО ЭТО ОЧЕНЬ ОПАСНО)
Solder works better with flux?? Im shocked.
Song name?
I also left a message
Kon sa chiz tha bro
What he use?...
The first pass created no metallurgic bond, the second pass with flux did. This proves one thing, solder flows to and bonds *where the heat is.* 😅💢
Love me some soldering lotion! ❤
What flux do
Good idea
Но коробочку для припоя и канифолю лучше делать из дюрали. Эта точно не залудится. А ещё лучше из тефлона, как у меня... а нержавейка лудится без проблем.
Pls tell the Name of the soldering flux name and image
Why is my flux hard?
flux is life of soldering
- Но, чёрт возми, как!? Холмс?
- Элементарно Ватсон
Moral of the story, use flux for soldering
Also having the blade warmed from melting the first puddle of solder helps. Having a surface closer to the soldering temp will have it flow better and have a better joint
Paste name please
Это ортофосфорная кислота?
Больше на подобие ТАГСа похоже