I’m looking into buying a VRod Muscle and i’m planning on installing a body kit. I haven’t found any videos on how to install as you noted as well. Thank you so much for your two videos, they were very helpful in understanding how to install a kit. Great job man, really appreciate your videos. Your bike looks great! Have a great summer and stay safe bro. Ben
Yes sir! You’re very welcome. I’m glad you found it useful. I felt like everyone love vrod and want to own a custom vrod but so hesitated to do it since there are no one willing to share it !
For the rear brake reservoir, I bought a small one from Amazon (round) and with a round bracket in the frame, just bolted. I can send you pics. Maybe on the exhaust video that I have you can see it
One more question, my speedometer doesn’t really fit properly in the new air box cover. It’s the same as yours. I have a 2016 v rod night rod. When it clamps down does it fit well or did you have to shave some of the fibre glass on the inside?
you are right. It won't fit perfectly. there will be a gap between cover and odometer. I spoke with seller and that probably the best they can do. each body kit maybe lightly different. for the gap, you probably have to seal it up after installation or you can leave it like that and make sure no water get into it. Don't ride the bike in the rain or wash the bike the way you wash your car. after custom the bike need to be treat like a show bike, lol real gentle =D
Thank you rider brother! Muscle already got the aggressive looking! I think you can convert to night Rod special rear fender if it’s what you’re looking for 😀
I have a 2017 VRod Muscle. I’m looking into changing the body style. Total, what was the amount of the kit? So I can have some what if an idea. Your bike looks great.
Thank you for visiting my channel! Depends on where you buy the kit, my is around $1200 unpainted. You will have to do all the work yourself. Watch my part 1 installation video. I have the link and more info about it :). If you order the kit from them. Tell them you got referred by Tu Nguyen (DIY Corner ) enjoy your vrod
@@DIY_Corner253 amazing thank you!! One more thing, for the air box cover, you didn’t show how you drilled the 2 holes in the front to keep it in place. I bought the exact same kit so wondering how you did that v your video is great
Hi, I am also installing this kit and was also wondering with the sensor. Because there is a company which make new cover for the airbox pan for airbox cover with integrated odometer. But you say we don't really need that and can fix the sensor somewhere inside the pan? Thanks in advance
Hi, you can find another container and transfer the fluid over but then you need to bleeding it! What I did was mount it up side down with a couple of zip tire on the side without extending the hose. Just paint the cap black. It the quickest way. You can see in other video I made with the bike
Hi I did custom rear fender on different VRod . Not this one. I didn’t have a chance to make video for it since it was little messy to install. But I plan to make a video in the future
Hi, you bike looks awesome, could you please tell me the kit name and price!!! I just bought a Vrod I’m new in this world !!! Thank you and keep doing nice videos like there! Success…
AggAuto Universal 40"x13" Car Grill Mesh - Aluminum Alloy Automotive Grille Insert Bumper 6x12mm Rhombic Hole, One of the Most Multifunctional Shape Grids 100x33cm Black a.co/d/dwqhEJy
@@johnnylee3750 sorry! unfortunately I don’t have the link. I got it at work and cut it off to the correct length. I think You should be able to buy at local hardware store
Hi! Do you have a v rod or you have different bike? I only do v rod. And if you have Facebook, you can get in touch with me at “Tu Hoang Kha Nguyen” for easy communication
I’m looking into buying a VRod Muscle and i’m planning on installing a body kit.
I haven’t found any videos on how to install as you noted as well.
Thank you so much for your two videos, they were very helpful in understanding how to install a kit.
Great job man, really appreciate your videos.
Your bike looks great!
Have a great summer and stay safe bro.
Ben
Yes sir! You’re very welcome. I’m glad you found it useful. I felt like everyone love vrod and want to own a custom vrod but so hesitated to do it since there are no one willing to share it !
Nice job! I hope you keep doing more with your Vrod or any Vrod for that matter. Congratulations
Thanks for your support! Will try to make more video
Thank you for this video! Needed to see how it was done.
Hi! You’re welcome
Beautiful bike brother, absolutely love it. Ride safe and keep it real 💯
Hi! Thanks brother! Wish you Nice rides out there
Thank you for the videos 🫡😎
You’re welcome rider 👍
Nice video bro! Keep up the good work!
Thank you very much for watching and subscribe for my channel! 😀
Thank you so much,, keep the VRod service there no many videos about it..
Thank you for this ! I’m going to follow this video and put a body kit on my 2016 NRS
Cheers 🍻
@DIY_Corner253 can you please drop a link to the exhaust and the body kit you put on.
@@Arsh-bv2ij link for body kit is in part 1 installation video. Exhaust is Akrapovic 2 to 1
Me 2
Thank you
Such a good video bro, hardly any stupid music throughout the whole thing
Hey! Thank you 😄🙏. Pretty concentrated and No music for this particular video lol
I like vrod👍👍
🤘🏻😃 welcome in
bon boulot
For the rear brake reservoir, I bought a small one from Amazon (round) and with a round bracket in the frame, just bolted. I can send you pics. Maybe on the exhaust video that I have you can see it
Hi, thank you brother. I ended up find a better spot for it already:)
@@DIY_Corner253where did you ended putting it?
@@jermaroemerencia2551 hey brother! I ended up mount it right under and parallel with the master cylinder.
can't see it on the video. so it seats behind the radiator Shroud ?
One more question, my speedometer doesn’t really fit properly in the new air box cover. It’s the same as yours. I have a 2016 v rod night rod. When it clamps down does it fit well or did you have to shave some of the fibre glass on the inside?
you are right. It won't fit perfectly. there will be a gap between cover and odometer. I spoke with seller and that probably the best they can do. each body kit maybe lightly different. for the gap, you probably have to seal it up after installation or you can leave it like that and make sure no water get into it. Don't ride the bike in the rain or wash the bike the way you wash your car. after custom the bike need to be treat like a show bike, lol real gentle =D
Great video! Love the rear fenders, tail section....I am leaving the tank stock,, that's the reason I bought mine. Muscle lol?
Thank you rider brother! Muscle already got the aggressive looking! I think you can convert to night Rod special rear fender if it’s what you’re looking for 😀
Do you have a link for the air filter cover bolt? I can’t find the right size I know is m6 but I can’t find like the one you have installed
I didn’t have to order it. You will have to order a long one and cut it down. I believe it’s around 5.5” long
I have a 2017 VRod Muscle. I’m looking into changing the body style. Total, what was the amount of the kit? So I can have some what if an idea. Your bike looks great.
Thank you for visiting my channel! Depends on where you buy the kit, my is around $1200 unpainted. You will have to do all the work yourself. Watch my part 1 installation video. I have the link and more info about it :). If you order the kit from them. Tell them you got referred by Tu Nguyen (DIY Corner ) enjoy your vrod
What did you do about the handlebars after removing the speedometer? How did you hold the handlebars down?
Removing the odometer doesn’t make any change to the bar, I just make a metal plate to cover on top to make it look nicer.
Thanks
Could rivets have been used on the sides of the radiator?
I recommend using plastic fastener. It will be easier
Hey, there is an IAT sensor in the black air box cover that you removed that isn’t in the video. Where did you put that after switching the body kit?
You just need to drill a hole on top of the plat top cover and mount it on there or mount it on the inside wall of the air box pan
@@DIY_Corner253 amazing thank you!! One more thing, for the air box cover, you didn’t show how you drilled the 2 holes in the front to keep it in place. I bought the exact same kit so wondering how you did that v your video is great
@@cdomenico27 I showed it from minute 5:25 in the video. Pretty straight forward brother
Hi, I am also installing this kit and was also wondering with the sensor. Because there is a company which make new cover for the airbox pan for airbox cover with integrated odometer. But you say we don't really need that and can fix the sensor somewhere inside the pan? Thanks in advance
I’m running into the same issue with the rear brake reservoir: it won’t fit in the radiator cover. Did you find a cover for it?
Hi! I will make a short video about that soon ! Stay with me
@@DIY_Corner253 Thanks!!!
Hi, you can find another container and transfer the fluid over but then you need to bleeding it! What I did was mount it up side down with a couple of zip tire on the side without extending the hose. Just paint the cap black. It the quickest way. You can see in other video I made with the bike
Did you ever end up putting the rear? I’d love to buy a Harley and do this, but I would love the have the rear also
Does that need cutting?
Hi I did custom rear fender on different VRod . Not this one. I didn’t have a chance to make video for it since it was little messy to install. But I plan to make a video in the future
@@DIY_Corner253 is it hard to do the rear? Does it require cutting?
@@albertolariosmarque I took the rear frame off so no cutting on the bike, just trim the fender
Hi, you bike looks awesome, could you please tell me the kit name and price!!!
I just bought a Vrod I’m new in this world !!!
Thank you and keep doing nice videos like there!
Success…
Hi friend! Thanks for visiting! Check out my installation part 1 video in my channel! I have the link in there
Hi! Do you have the Amazon link to radiator mesh?
AggAuto Universal 40"x13" Car Grill Mesh - Aluminum Alloy Automotive Grille Insert Bumper 6x12mm Rhombic Hole, One of the Most Multifunctional Shape Grids 100x33cm Black a.co/d/dwqhEJy
What is the size of the bolt you use for the air filter??
Hi! I think it is M8 metric
I bought a 2007 vroad and I have the kit to modify it but I would like to know if you can help me with that job,$
Hi! Where are you located? I’m in Spring Texas
I live n Conroe tx
How long is the New m6 bolt
Cut to where it got about an inch left from flat top filter cover. Sorry I don’t have the exact measurements
@@DIY_Corner253 where did you get the M6 bolt? can you post a link?
@@johnnylee3750 sorry! unfortunately I don’t have the link. I got it at work and cut it off to the correct length. I think You should be able to buy at local hardware store
How much Dollar will be required for the body part
Around $1200 for the body kit
Around $1200 for the body kit
How much did the whole body kit cost you and would you do that for me if I wanted a body kit on my Harley, Davison I live in HARLINGEN Texas
Hi! Do you have a v rod or you have different bike? I only do v rod. And if you have Facebook, you can get in touch with me at “Tu Hoang Kha Nguyen” for easy communication
Great job anh. Anh co instagram ko?
:) cảm ơn bạn mình chưa lập instagram cho VRod. Maybe create one pretty soon