Good morning. I have xerox 7970 and i always replacing the fuser unt due to fuser error. When i checked the error history it says the fuser motor is bad. Can you show us in a video what is the fuser motor
@360prank Hi, Xerox 7970 is a machine from 2014, so it is hard to find. I don't know if I will have the opportunity to have one. But replacing the engine is trivially easy, because the bigger the machine, the easier it is to disassemble and replace parts.
tu video esta increible, precisamente tengo una xerox 7775 y estoy batallando porque me esta atorando el papel grueso pero en la entrada del fusor donde esta los rodillos, los dobla al inicio, espero me ayude esto para revisarla a fondo, perfecto tu video, esta genial 🏆🏆🏆🏆🏆🏆
Excellent video. Xerox c70 here... That sleeve you slid off that has all the black crud on it, is that normal? Did you replace that sleeve with a new one when putting it back together? If so, do you happen to know the part number?
Witam. po wymianie wałka teflonowego i termicznego jest problem z dogrzaniem czarnego tonera, ma Pan wiedzę, czy programowo przez NVM Read Write można zmienić prędkość przesuwu papieru lub podnieść temperaturę utrwalania ?
Znam ten problem. Oznacza to że zastosowany wałek grzejny jest złej jakości i trzeba poszukać innego dostawcy jesli wcześniej było dobrze. Wiem że wałki Katun są w tym wypadku słabe.
No właśnie w tym jest problem. Dostępność dobrych Wałków. Chyba masz niezły problem, ale z pewnością coś wymyślisz. Napisz jak znajdziesz rozwiązanie. Pozdrowionka pozdrawiam
Ale zbieg okoliczności. Właśnie zrobiliśmy zdjęcia do sklepu kompletnych nowych oryginalnych fuserów 008R12989 czyli do XEROX DC240 DC250 WC7655. Czy w moich Fuserach nie ma takich samych wałków i folii grzejnej jak w twoim? To by ci pomogło. Mam 4 sztuki, wielkie to jak diabeł :)
If you must do this, replace the heaters. After replacing the lamps, you can install to the copier. RUclips SUPPORT: ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin PATREON: www.patreon.com/CopyExpertMovieStudio PATRONITE: www.patronite.pl/1796
HELLO WE HAVE A PROBLEM with the xerox 5330 photocopiers all the copies with different caliber rolls we ask for help from the consultant to solve this problem we think that the problem is the temperature of the oven
What tools do you use, I have paper stuck in C60 fuser. I'm trying to open the fuser with 2.4 precession screwdriver, but some screw at the bottom is so tight. Can you guide me how to fix it.
Remember that any metal screw can be heated with a burner if you cannot unscrew it. Since you use WD40, I assume that you are not a technician, so I will tell you a secret: In every photocopier, there are several screws that have a left-hand thread, i.e. they unscrew the other way. Maybe it's one of those screws?
@@MrRicoh Found a instruction guide of Partsdrop, that was also helpful. The WD40 still made it easier, but I now understand that hex 5.5 also can be used for the other screws. I'm not a technician indeed, but I fixed the paper jam. Hope the pressure tower screw should be 2 centimeter, because unfortunately I did not measure it. Still need to test the fuser.
You have to replace Fuser Unit Best regards from Poland and good luck. Części do kopiarek www.copy-expert.pl/ Facebook: facebook.com/Copy-Expert-113431678801597/ Części używane www.copy-expert.com/ #RICOH #COPIER #PRINTER #DRUM #TUTORIAL #PHOTOCOPIER #TRANSFER #COPIERPARTS #COPYEXPERT #JEMIOŁEK
You didn't write me the mistake. I can't help you without this information. Części do kopiarek www.copy-expert.pl/ Facebook: facebook.com/Copy-Expert-113431678801597/ Części używane www.copy-expert.com/ #RICOH #COPIER #PRINTER #DRUM #TUTORIAL #PHOTOCOPIER #TRANSFER #COPIERPARTS #COPYEXPERT #JEMIOŁEK
Description: Reading unit communication error Insufficient insertion of the reading unit connector Remedy: Disconnect and then connect the flexible cable. Replace the flexible cable
First, disassemble the heating unit and check how the shafts and thermistors look like, then clean the dirty elements. If that does not help, replace the fusing unit.
Description Optional second paper feeder communication problem • Communication fails five times successively. Causes Paper feeder installed incorrectly. Defective main PCB or drawer main PCB. Remedy Check the installation state of the paper feeder and adjust it if it is not properly installed. Replace the main PCB or drawer main PCB and check for correct operation.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
very important video i see it again and again.
Thanks for your comment. I like such opinions. I am glad that my videos on printers and copiers are helpful for you. Greetings.
Thanks again, master. You saved me.👍🏼
Thank You
Good morning.
I have xerox 7970 and i always replacing the fuser unt due to fuser error. When i checked the error history it says the fuser motor is bad. Can you show us in a video what is the fuser motor
@360prank Hi, Xerox 7970 is a machine from 2014, so it is hard to find. I don't know if I will have the opportunity to have one. But replacing the engine is trivially easy, because the bigger the machine, the easier it is to disassemble and replace parts.
tu video esta increible, precisamente tengo una xerox 7775 y estoy batallando porque me esta atorando el papel grueso pero en la entrada del fusor donde esta los rodillos, los dobla al inicio, espero me ayude esto para revisarla a fondo, perfecto tu video, esta genial 🏆🏆🏆🏆🏆🏆
@yuliogomez9040 Muchas gracias por tu comentario. Le deseo una reparación exitosa. No olvides suscribirte a mi canal y darle me gusta al vídeo.
Excellent video. Xerox c70 here... That sleeve you slid off that has all the black crud on it, is that normal? Did you replace that sleeve with a new one when putting it back together? If so, do you happen to know the part number?
Yes, I installed new parts but I don't have catalog numbers because there are no such machines in my country.
Witam. po wymianie wałka teflonowego i termicznego jest problem z dogrzaniem czarnego tonera, ma Pan wiedzę, czy programowo przez NVM Read Write można zmienić prędkość przesuwu papieru lub podnieść temperaturę utrwalania ?
Znam ten problem. Oznacza to że zastosowany wałek grzejny jest złej jakości i trzeba poszukać innego dostawcy jesli wcześniej było dobrze. Wiem że wałki Katun są w tym wypadku słabe.
@@MrRicoh Probowalem kilka wałków zawsze ten sam problem, a oryginalnego raczej ciężko kupić.
No właśnie w tym jest problem. Dostępność dobrych Wałków. Chyba masz niezły problem, ale z pewnością coś wymyślisz. Napisz jak znajdziesz rozwiązanie. Pozdrowionka pozdrawiam
@@MrRicoh A te wałki które masz w sprzedaży to są sprawdzone i działają ? Do C560 ? Jeśli tak to chętnie kupię
Ale zbieg okoliczności. Właśnie zrobiliśmy zdjęcia do sklepu kompletnych nowych oryginalnych fuserów 008R12989 czyli do XEROX DC240 DC250 WC7655. Czy w moich Fuserach nie ma takich samych wałków i folii grzejnej jak w twoim? To by ci pomogło. Mam 4 sztuki, wielkie to jak diabeł :)
Can I put 220v light into a Xerox dc 252 110v fuser unit
If you must do this, replace the heaters. After replacing the lamps, you can install to the copier.
RUclips SUPPORT: ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin
PATREON: www.patreon.com/CopyExpertMovieStudio
PATRONITE: www.patronite.pl/1796
@@MrRicoh thanx man ur the best
@@ac25767021 It's been a while, but tell me if the repair was successful?
HELLO WE HAVE A PROBLEM with the xerox 5330 photocopiers all the copies with different caliber rolls we ask for help from the consultant to solve this problem we think that the problem is the temperature of the oven
🔥🔥 Get access to support bonuses RUclips MEMBERSHIP: ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin
Don't forget to subscribe to my channel.
@AgriToro Has the temperature issue been resolved? What did you replace?
Can i help me sir how to chnge fuser roller for fuji xerox M455df
This component cannot be replaced, the entire FUSER UNIT must be replaced.
@rheatapia9828 Should I change the roller? Does the machine work?
How to identify wc 7545 mcu board and wc 7535 mcu board
There are other markings on PCBs
@aashasahu4736 Were you able to fix this photocopier?
What tools do you use, I have paper stuck in C60 fuser. I'm trying to open the fuser with 2.4 precession screwdriver, but some screw at the bottom is so tight. Can you guide me how to fix it.
Pour on the WD-40 screw and it will surely unscrew.
@@MrRicoh Tried it three times putting WD-40 on the screw, doesn't work. The screw is underneath fuser next to the stickers JFU-1, and some barcodes.
Remember that any metal screw can be heated with a burner if you cannot unscrew it. Since you use WD40, I assume that you are not a technician, so I will tell you a secret: In every photocopier, there are several screws that have a left-hand thread, i.e. they unscrew the other way. Maybe it's one of those screws?
@@MrRicoh Found a instruction guide of Partsdrop, that was also helpful. The WD40 still made it easier, but I now understand that hex 5.5 also can be used for the other screws. I'm not a technician indeed, but I fixed the paper jam. Hope the pressure tower screw should be 2 centimeter, because unfortunately I did not measure it. Still need to test the fuser.
Hello I have a Workcentre M24, Error 102-319, can it be caused by the fuser unit? I know it's time to replace it.
Yes you have to start by replacing FUSER. We will not explain anything without this action.
Ok, tks.
@wallanfcc Do you have any information for me? Were you able to fix this copier?
is there any help for we 7530 fused roller replacement
You have to replace Fuser Unit
Best regards from Poland and good luck.
Części do kopiarek www.copy-expert.pl/
Facebook: facebook.com/Copy-Expert-113431678801597/
Części używane www.copy-expert.com/
#RICOH #COPIER #PRINTER #DRUM #TUTORIAL #PHOTOCOPIER #TRANSFER #COPIERPARTS #COPYEXPERT #JEMIOŁEK
Hi!
Thanks for the help, first of all!
please tell me the code for fuser
driving gear at xerox wc 5945.
thanks!
HI,
Fuser Drive Gear Kit Mfr Part #: Xerox 607K27781, 607K27780, 655N00612 cost: 150-200$
@@MrRicoh thank you !
Regards and I am glad that I could help you.
@@bripserv It's been a while, but tell me if the repair was successful?
Yes, I changed the pinion and it has been working since then. Thanks for your help!
i have xerox workcentre 5745 in display only showing configration Error and display not allow me to operate.......how can i fix this plz tell me
You didn't write me the mistake. I can't help you without this information.
Części do kopiarek www.copy-expert.pl/
Facebook: facebook.com/Copy-Expert-113431678801597/
Części używane www.copy-expert.com/
#RICOH #COPIER #PRINTER #DRUM #TUTORIAL #PHOTOCOPIER #TRANSFER #COPIERPARTS #COPYEXPERT #JEMIOŁEK
@ayeshaprinters2073 Were you able to fix this photocopier?
Sir help me I can replace IH Driver board wc 7545 to wc 7535
Are you my subscriber?
@@MrRicoh ok sir
Please help me
@aashasahu4736 Were you able to fix this photocopier?
sir canon 3225 error code code E000280-0003...plz help....xerox se print nikal rahe hai but zerox nhi nikal rahi
Description: Reading unit communication error
Insufficient insertion of the reading unit connector
Remedy: Disconnect and then connect the flexible cable. Replace the flexible cable
@prashantsaraswat4803 Were you able to fix this photocopier?
Sir i have error 310.382.00 on my xerox 7545 how do i fix it
Hi look this: www.copytechnet.com/forums/xerox/96492-xerox-wc-7556-fuser-system-error-2.html
@madhakaa Were you able to fix this photocopier?
I have an error cf 010 kyocera 2030 if possible I want to know the component that poses a problem on the motherboard
I think this is Backup memory read / write problem (main PCB)
My xerox machine is fuji xerox docuprint M455df how to fix
But what do you want to fix? You didn't describe the problem.
Xerox Workcentre 3225 low heat error sir
First, disassemble the heating unit and check how the shafts and thermistors look like, then clean the dirty elements. If that does not help, replace the fusing unit.
@mullashaikjaveed7453 Were you able to fix this photocopier?
thanx man ur the best
I'm glad I helped
@hassanamghar7278 Were you able to fix this photocopier?
Your videos are quiye helpful
I have an error code C0150 in kyocera taskalfa 520i Could you upload another video to fix C0150 error.
Description
Optional second paper feeder communication problem
• Communication fails five times successively.
Causes
Paper feeder installed incorrectly. Defective main PCB or drawer main PCB.
Remedy
Check the installation state of the paper feeder and adjust it if
it is not properly installed. Replace the main PCB or drawer main PCB
and check for correct operation.
@sudenshrestha4356 Were you able to fix this photocopier?
you just disassemble the fuser not fixing, wrong title.
Fuser and fixing and fusing is the same.
@caloygabrianebe5410 Sometimes people want to know what's inside the unit.