How to Replace Window Regulator 00-07 Ford Focus

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024
  • Buy Now!
    New Window Regulator from 1AAuto.com 1aau.to/ia/1AWR...
    1A Auto shows you how to repair, install, fix, change or replace a slow, stuck, cracked or damaged window regulator. This video is applicable to 2000-2007 Ford Focus models.
    🔧 List of tools used:
    • Flat Blade Screwdriver 1aau.to/oZ7/1AX...
    • 10mm Socket 1aau.to/oJ7/1AX...
    • 6mm Socket 1aau.to/oJ7/1AX...
    • 7mm Socket 1aau.to/oJ7/1AX...
    • 8mm Socket 1aau.to/oJ7/1AX...
    • T20 Driver 1aau.to/onz/1AX...
    • Ratchet 1aau.to/o3q/1AX...
    • Socket Extensions 1aau.to/oQn/1AX...
    For More Info visit us at 1aau.to/h/aLx/
    ⚠ DISCLAIMER:
    While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии • 123

  • @1AAuto
    @1AAuto  3 года назад

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
    √ *Do it Yourself*
    √ *Save Money*

  • @benisplayin
    @benisplayin 3 года назад +2

    Just purchased the part for my Mother in laws car. I am a contractor not an auto tech. Doesn't mater with accurate instructions. Nicely done boys. Thank you.

  • @vidyou1212
    @vidyou1212 2 года назад +4

    Great video, very helpful. Rather than removing the glass, I used a piece of duct tape to secure the glass in place. I put the duct tape over the top of the door frame to keep the window from falling into the door. Hoping this small tip helps.

  • @GallagherPreach
    @GallagherPreach 5 лет назад +5

    Excellent video. My son (age 12) and I replaced the window motor and regulator just a few moments ago. It was the driver's side on a 2000 Ford Focus. The video went perfectly step by step. Also, I ordered the part through your company and the service was excellent. Not only was the service excellent, but the cost was less expensive than other places. Thank you for the assistance.

  • @ejay26
    @ejay26 11 лет назад +3

    Many thanks from the UK for your tutorial - it saved me paying garage labour rates!
    I found that I didn't have to remove the glass completely.
    Once I released it from the holders, I simply pushed it up in the frame a few inches and wedged a piece of card between the glass and rubber channel to stop it slipping back down. I also added a strip of Duct tape from the glass to top of door frame for extra support!

  • @tinytimnashville
    @tinytimnashville 8 лет назад +3

    Just finished installing my regulator in my 2004 wagon. What a breeze! They have come a long way since I changed out my 1976 Gremlin regulator. One thing Mike didn't cover (or I missed), there is a plastic hold down & the plastic tab (Mike calls it) that holds down the cable cross to the center of the door. They need to be transferred to the new piece. Other than that, it's as simple as the video. I may add, to reattach your window buttons & lock switches once you have the regulator tightened down and the window in and give it a few test runs before you put it back together. Happy Motoring! Thanks 1AAuto.

  • @stevebonfiglio23
    @stevebonfiglio23 6 месяцев назад

    This was an extremely helpful, well-made, video with slow, careful explanations. Gonna get my next parts at A1 Auto...thx guys!

  • @vladi41thbirtday
    @vladi41thbirtday Год назад

    Great video. Worked magically and was able to get the it done in half an hour! Great job❤

  • @royallenfields5883
    @royallenfields5883 10 месяцев назад

    Your video was very helpful. Was able to tackle the job myself and saved me some bucks. Thank you very much. Greatly appreciated!! 👍

  • @RockandGameUSA
    @RockandGameUSA 9 лет назад +3

    Thank you for this video, it helped me replace my mothers window regulator. This video was exactly the process done with my mothers 2004 focus. THANKS!!!

    • @1AAuto
      @1AAuto  9 лет назад

      RockandGameUSA We're glad the video helped you out. Thanks for watching. 1aauto.com 866-403-3393

  • @gsampaio
    @gsampaio 9 лет назад +7

    Hi. Great video. My window is stuck fully up. How do I lower it to release the grips on the glass?

  • @whatgoesaroundcomesaround1376
    @whatgoesaroundcomesaround1376 4 года назад

    Thank you @1A Auto for this vid. It took me a little bit longer than 12 minutes to change out the regulator on my 2002 SE ;-) but between the vid and my Haynes manual everything went pretty smoothly.
    Removing & replacing the regulator itself was not that big of a deal, except that one of the M6 bolts that mount the reg. to the door frame stripped out when I was removing the old reg. Fortunately I found a short M6 bolt in my "bucket o' bolts". The bolt I found is a Phillips drive instead of a hex drive, but hey, it works!
    The most challenging part of the job was removing & replacing the interior trim and what not. I invented some new words (!) while dealing with that!

    • @1AAuto
      @1AAuto  4 года назад

      +WhatGoesAroundComesAround Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

  • @crispinw59
    @crispinw59 7 лет назад

    Didn't have time to get the part ordered from y'all. Was nervous about having to do this task and this video made it stupid simple. I was done in an hour. Thank you!

  • @rodsmolter5046
    @rodsmolter5046 5 лет назад

    Every window that I've had break, which is up to 5 or 6 now, has not been the cable. It's been those white plastic clips that attach the window to the rails. Unfortunately you can't replace just the clips. If you get a better quality regulator like the 10 year warranty 1 from am auto, you will notice that these plastic clips have a thick metal wire through the middle to reinforce them. The cheap one's don't and those clips will snap again. I had that happen once a week after I replaced the old one. After the first couple, I got tired of spending $100+ to have them replaced and learned how to do it myself thanks to videos like this. Now it costs me $46 and an hour or so of my time.

  • @bonnieglass1386
    @bonnieglass1386 8 лет назад

    Good Afternoon, Just wanted to Thank You for the great step by step video, I was able to remove an install my 2007 Ford focus driver side window regulator easily myself, a 54 woman. Keep the videos going

    • @1AAuto
      @1AAuto  8 лет назад

      +Bonnie glass That’s great to hear! Glad we could help and thanks for watching 1aauto.com 866-403-3393

  • @ScrantonPiper
    @ScrantonPiper 7 лет назад

    It was a BIG help to have this video. I ordered the part from you. This video saved me a lot of $$$ and was not terribly difficult to do if you go step by step with the video and take your time. Thanks!

    • @1AAuto
      @1AAuto  7 лет назад

      +ScrantonPiper Thank you for your order. We're glad to hear that you were able to complete the repair! If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY

  • @seanryan715
    @seanryan715 11 лет назад

    Major Thank You, for this video. It was very helpful. I had the job done in an hour and a half and saved a fortune as I brought the part online the whole job only cost me €132. Again thank You.

  • @jtjaelonkeinad5023
    @jtjaelonkeinad5023 3 года назад

    It really helps, and thanks a lot.

  • @hi-filuggage13
    @hi-filuggage13 11 лет назад +1

    THANK YOU THANK YOU THANK YOU!! This work on my 2005 ZX4 Focus. Paid $128 for the complete OEM regulator. Took a few hours. Could do it again in 30 min. I really appreciate the time you spent on doing this video. You're instructions worked like a charm.
    Quick question, do you recommend greasing anything up? When I removed the original regulator, there was a little bit of grease in random parts.

  • @alchemist4883
    @alchemist4883 8 лет назад

    Great video instructions...could not have been more clear. I did a 2000 focus and ran into one issue. The motor on the new part was a bit offset from the original and the wiring harness that is clipped to the door was in the way. I had to drive out the clip and run it a little above the motor on the new part. Still was nice and tight against the inner for frame but wire tied it back just in case. Thanks for the fantastic videos, I have used them before!

    • @1AAuto
      @1AAuto  8 лет назад

      +Al Chemist We love to hear that our videos are helping people get the repair done! That's our main goal. Great work, and thanks for checking us out. For anyone else who might be doing this job, we carry the parts shown in the video on our website. Order from us and we'll cover the shipping. Here's a link: www.1aauto.com/1A/WindowRegulators/Ford/Focus/1AWRG00397?RUclips&CTA%20Comment&ATony

  • @daisyshah
    @daisyshah 9 лет назад

    Thank you for this video! I bought the part through your e-store and just repaired my window. Super easy fix. I will be replacing both rear window regulators now.

    • @1AAuto
      @1AAuto  9 лет назад

      You’re welcome! Glad to hear the repair went well. Thanks for watching 1aauto.com 866-403-3393

  • @inkdvessel9425
    @inkdvessel9425 8 лет назад +1

    Followed the instructions, worked perfectly. Thanks for upping this video!

    • @1AAuto
      @1AAuto  8 лет назад

      We're glad the video helped you out. Thanks for watching. 1aauto.com 866-403-3393

  • @1AAuto
    @1AAuto  11 лет назад +1

    Yes it will be the same as the Ford Focus shown in the video.

  • @jaypruiett2026
    @jaypruiett2026 7 лет назад

    Thank you for this video! Went to the junk yard and got the part because I needed it fixed fast. In the future, I hope to buy from 1-A auto. Your youtube how-to videos are awesome!!!

    • @1AAuto
      @1AAuto  7 лет назад

      +Jay Pruiett Thanks for watching! If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them: www.1aauto.com/1A/WindowRegulators/Ford/Focus/1AWRG00397?RUclips&CTA+Comment&JIM3ss-jos

  • @bunkphenomenon
    @bunkphenomenon 8 лет назад +1

    Great video!! Last night, just like you said, I heard a POP from my girlfriends '02 Ford Focus drivers side window, and sure enough the window wouldnt roll up or down. Found your video this morning and it really helped me as Ive never replaced a window regulator before!
    I was going to go to the junk yard to pick up a used regulator, but figured that an additional 60 dollars for a new one with a lifetime warranty was worth the extra money and time it wouldve taken me to uninstall one from the junk yard.
    Installing the regulator was really easy I surprised myself.
    Again thanks for this video!!!

    • @1AAuto
      @1AAuto  8 лет назад

      +bunkphenomenon You're welcome! We're glad to hear that we were able to help you save some cash and get the job done yourself. That's exactly why we make these videos. For anyone else looking to repair their window regulator, 1A Auto offers the item here: www.1aauto.com/1A/WindowRegulators/Ford/Focus/1AWRG00397?RUclips&CTA%20Comment&ATony

  • @devincutter_
    @devincutter_ 26 дней назад

    Thank you!

  • @1AAuto
    @1AAuto  11 лет назад +1

    If you are having issues getting the window to come up and down, you should attempt to remove the motor, if you cannot access the motor bolts, you will have to cut the metal cable to free up the window so it can slide up and down.

  • @jaybetaylor
    @jaybetaylor 10 лет назад

    massive thank you just saved me from a restless night with my window stuck on down

    • @1AAuto
      @1AAuto  10 лет назад

      Awesome! Thanks for watching. Have a great holiday season. 1aauto.com 888-844-3393

  • @danhladki8277
    @danhladki8277 10 лет назад +1

    You guys are great. Just saved me a bunch of money. Thanks so much!!

    • @1AAuto
      @1AAuto  10 лет назад

      Thank you for watching.
      1aauto.com 888-844-3393

  • @andyshaw2800
    @andyshaw2800 9 лет назад

    1aaauto thank you for the instructional video on replacing the window regulator. It was first class and helped me enourmously abd saved me £££££££s lost of money doing it myself. Keep up the good work.

    • @1AAuto
      @1AAuto  9 лет назад

      +Andy Shaw No problem. Glad to hear it helped you out. 1aauto.com 866-403-3393

  • @CmdrGendoIkari
    @CmdrGendoIkari 8 лет назад +4

    Thanks for glossing over how to get the door handle assembly off. Luckily I didn't break it.
    :-P

    • @williamfripp623
      @williamfripp623 4 года назад

      CmdrGendoIkari yeah, that’s where I’m stuck. Thanks for revealing the trick! Lol

  • @zydzior64
    @zydzior64 3 года назад

    Thank you for help

  • @tonyrodriguez2543
    @tonyrodriguez2543 11 лет назад

    The tutorial is indeed excellent, it would have saved me some brain-work if I had watched it first. However, the way to release the handle cover is through and access hole under the handle. Stick a small screwdriver through the hole and pry the cover off. This will prevent scratching up the door handle.

  • @cidibi8108
    @cidibi8108 11 лет назад

    Many thanks for the complete tutorial.
    I wish you all the best.
    cidibi
    Italy

  • @slopecutter9859
    @slopecutter9859 4 года назад

    Thanks for the vid, made the job super fast and easy

  • @1AAuto
    @1AAuto  11 лет назад +1

    There should be a couple of screws on the end of the door that hold it in place, you would also need to disconnect any rods or cables from it on the inside of the door. 1aauto.com 888-844-3393

  • @jairogil5236
    @jairogil5236 10 лет назад

    thanks to you guys I could replace my front window , but now I need to fix the rear one but I cant find a video for this

    • @1AAuto
      @1AAuto  10 лет назад

      Thank you for watching. Unfortunately we do not currently have a video for the rear doors but will keep that in mind for the future.
      1aauto.com 888-844-3393

  • @kevpointer5627
    @kevpointer5627 7 лет назад +1

    Great video, thank you for sharing. Now to tackle the window on my sons car :-)

  • @tombrayton4412
    @tombrayton4412 3 года назад

    What is the car.next to the focus you are working on NOW THATS A VIDEO WORTHY CAR

  • @cjbaltzley
    @cjbaltzley 10 лет назад

    Very helpful. I could not have done it with you.

  • @s.z.7895
    @s.z.7895 7 лет назад

    Best video! Thanks a lot, finished my door in 30 min. 👍

    • @1AAuto
      @1AAuto  7 лет назад +1

      +S. Z. Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/WindowRegulators/Ford/Focus/1AWRG00397?RUclips&CTA+Comment&JIM3ss-jos

    • @s.z.7895
      @s.z.7895 7 лет назад

      I paid for my more than $ 100,

  • @1AAuto
    @1AAuto  11 лет назад

    Thanks for watching Sean

  • @chrisrayf
    @chrisrayf 10 лет назад

    I want to thank you for helping me with this info. I have 2004 ford focus and yesterday, my window in the driver seat was not working. I came across your video and really help me out on taking apart the side of the door. It turn out that that the window regulator was no good. But I bought a new one and with your video, it helped me put it together. Can you make a video on how to fix the ac in the ford focus. I already put a couple of cans of freon and it lasted only a couple of weeks. Can you you tell me what is wrong with my car?

    • @1AAuto
      @1AAuto  10 лет назад

      You may want to have a leak test done on it. They'll put dye in the Freon that should show you where the leak is coming from.

  • @MrBradleyTatum
    @MrBradleyTatum 10 лет назад

    This video helped a lot, thanks!

    • @1AAuto
      @1AAuto  10 лет назад

      Thanks for watching. Have a great day! 1aauto.com 888-844-3393

  • @raisedinsin
    @raisedinsin 10 лет назад

    Hey guys I love this video big help! Question though, my brother was driving my 2007 Ford Focus, attempted to throw some Tea out the window, apparently it got all over the window. He rolled it all the way down, when he got it back 30 minutes later the window does not come back up. There's no cracking or popping but you hear the motor trying. Can I just clean the motor in some way?

  • @JubbaheyChannel
    @JubbaheyChannel 4 года назад

    Hi guys, thanks for the vid. Is the disassembly pretty much the same for the rear seat window, its loose and kinda jammed half way down so Im thinking (from watching your vid here) its popped out of the clamps. The window was frosted/iced up and my son wound the rear instead of the front down and there was a big clunk.
    I've watched a number of your vids, they are really helpful, thanks again.

    • @1AAuto
      @1AAuto  4 года назад

      +Jesus Almoriandolococo Thanks for checking us out! 1AAuto.com

  • @1AAuto
    @1AAuto  11 лет назад

    The video will show you how to detach them from the regulator.

  • @DannytheTiger6562
    @DannytheTiger6562 11 лет назад

    Thanks. That video was very helpful.

  • @1AAuto
    @1AAuto  11 лет назад

    You may need to remove the door panel to unlock the door from the inside, or if you have a remote you could try to pop the locks open using that. Our sales staff could help you out with replacement parts. Our toll free number is 888-844-3393 1aauto.com FREE SHIPPING in the lower 48 states.

  • @bigdave5810
    @bigdave5810 5 лет назад

    Great video thanks so much.

    • @1AAuto
      @1AAuto  5 лет назад

      +Big Dave Thank you for your feedback!

  • @ariesfranhens4326
    @ariesfranhens4326 9 лет назад

    I love you guys' videos! they are very helpful! I saved like 200 dlls thanks to this video! keep up the great job guys! thank you so much!!!

    • @1AAuto
      @1AAuto  9 лет назад

      Thank you for watching! Glad to be of help. Please let us know how the repair turns out. 1aauto.com 888-844-3393

    • @ariesfranhens4326
      @ariesfranhens4326 9 лет назад

      +1A Auto Parts do ya think this will be the same process for a 2001 ford focus?

  • @marcboardman1187
    @marcboardman1187 8 лет назад

    Great instruction. Thank you!

  • @tonedcos
    @tonedcos 7 лет назад

    Thanks for the vids. Better than a haynes manual ;)

    • @1AAuto
      @1AAuto  7 лет назад +1

      +tonedcos Thank you for watching! The Haynes' manual is often vague and does not provide other tips/tricks to performing the work. 1aauto.com

  • @Angel-uw4yy
    @Angel-uw4yy 7 лет назад

    thank you so much finished my door in 45 min

    • @1AAuto
      @1AAuto  7 лет назад

      +Angel c Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them: www.1aauto.com/1A/WindowRegulators/Ford/Focus/1AWRG00397?RUclips&CTA+Comment&JIM3ss-jos

  • @scotchboutique1
    @scotchboutique1 11 лет назад

    Is the left rear nearly the same process? I didn't find a video for it. Thanks!

  • @1AAuto
    @1AAuto  11 лет назад

    it's the same procedure. Thanks for watching. 1aauto.com 888-844-3393

  • @realsickclown
    @realsickclown 5 лет назад

    Is the fusion sel 2012 similar in design inside? Or do you have a video for that? 2012 fusion sel.

  • @dbe471
    @dbe471 8 лет назад

    You also need a T30 torx if you want to take the motor off the regulator and put it on the new one.

  • @dtiydr
    @dtiydr 11 лет назад

    I have a Ford Focus -01 1.6l motor where the window regulator all of a sudden didn´t worked when i pushed the button. No grinding sound or anything at all, it just happened. I can hear a klicking from a relay, which seem to be inside the dorr, when i push the button but nothing happens so im clueless, maybe the motor?
    Will the panel with screws and such be pretty much exactly the same for my car then for the car in the video?

  • @Handlin916
    @Handlin916 11 лет назад

    Hey 1A, thanks for ur vid, I have an issue that wasnt covered in the video.My window was pulled out of its clips and fell inside the door. I got my door open and inside it I found that the clips that hold the window(shown at 4:58)were broken off and laying on the bottom of the door.I dont think my regulator is broken since the holders arent in to hold it up. It looks like the plastic pieces that hold them are broken. Is there a way to replace those parts and reattach the clips to the bars again?

  • @dtiydr
    @dtiydr 11 лет назад

    Thanks a lot!

  • @Ricky-km7hy
    @Ricky-km7hy 10 лет назад

    Thanks 4 giving me a Gide on how 2 do my ford mondeo .

    • @1AAuto
      @1AAuto  10 лет назад

      Thanks for watching. Have a great day! 1aauto.com 888-844-3393

  • @DevinBrewer100
    @DevinBrewer100 9 лет назад

    Thank you

    • @1AAuto
      @1AAuto  9 лет назад

      Thank you for watching! Glad to be of help. Please let us know how the repair turns out. 1aauto.com 888-844-3393

  • @1AAuto
    @1AAuto  11 лет назад

    The dealer may carry replacement ones. 1aauto.com 888-844-3393

  • @joehyundaitech7961
    @joehyundaitech7961 4 года назад

    mike i have the same car but the wagon model. this popping sound just started but it is only once in a while. and only once in a while the window wont come down think its time for a new regulator or could it be the switch ?

    • @1AAuto
      @1AAuto  4 года назад

      +JOE Hyundai Tech Thanks for checking us out! We wouldn't be able to tell you exactly the cause but it sounds like there is an issue perhaps with the motor starting to go.

  • @joebullard9841
    @joebullard9841 11 лет назад

    Hi i'm having trouble moving the window down by hand as it is stuck in its highest postion, any help would be appreciated please?

  • @supersnake151
    @supersnake151 8 лет назад

    Great video. My only problem is the window is stuck down

    • @1AAuto
      @1AAuto  8 лет назад

      +supersnake151 As an expedient solution for security and weather, you should be able to open the interior door panel and prop the window up with a 2x4 piece of wood. 1A Auto does offer this window regulator at the following link: www.1aauto.com/1A/WindowRegulators/Ford/Focus/1AWRG00397?RUclips&CTA%20Comment&ATony

  • @Martiinii5
    @Martiinii5 10 лет назад

    hey i need some help over here ... I try to install elecitric side mirrors on my Ford Fusion ( its look like this focus) but the problem is I do not have the cables to the switch and the mirror, I know that I need to replace the entire cable harness ... wonder if there is another way or you could add a clip on youtube ??

    • @1AAuto
      @1AAuto  10 лет назад

      We currently do not have an auto repair video on this application. We'll keep this request in mind in the event that we need to make this repair in the future.

  • @BigCrzyRdNeck
    @BigCrzyRdNeck 11 лет назад

    I have a 2 door focus is the same regulator for it as well?

  • @justinclewis86
    @justinclewis86 10 лет назад

    I got as far as pulling back the water shield after taking the door panel off, but now I have a new issue. The plastic that lines the shield is completely melted onto the metal. Is it time to take it into a shop or is this something I can fix?

    • @1AAuto
      @1AAuto  10 лет назад

      Thank you for watching. You may be able to take care of it yourself. Peel it back and see if you can re stick it or you can use some tape to re attachment. It is just a barrier to keep dirt from getting inside the window track and does not need to be perfect. Hope this helps!
      888-844-3393

  • @jj8995
    @jj8995 6 лет назад

    Should I use WD-40 or grease anywhere when putting it all back together. Thanks

    • @1AAuto
      @1AAuto  6 лет назад

      +Rudyard F Our window regulators come pre-lubed, you shouldn't have to put anything else on it. Here is a link to the replacement window regulator shown in this video. www.1aauto.com/1A/WindowRegulators/Ford/Focus/1AWRG00397?RUclips&CTA+Comment&JIM3ss-jos

  • @elliottministries
    @elliottministries 11 лет назад

    How do you replace the front door handle latch?

  • @1AAuto
    @1AAuto  9 лет назад

    +Cristina Staggs Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393

  • @1AAuto
    @1AAuto  11 лет назад

    Yours would be different. We carry a great variety of new window regulators for your Ford focus on our website 1aauto.com 888-844-3393

  • @LarkspeedNL
    @LarkspeedNL 4 года назад

    I wonder why the US models are using a bunch of different sized bolts in the door when the MK1 european models use philips head screws so you just need a screwdriver to get the panel off

    • @1AAuto
      @1AAuto  4 года назад

      +Zaphod Gaming Thanks for checking us out! 1AAuto.com

  • @DJMilsen
    @DJMilsen 10 лет назад

    Hey 1A Auto,
    I just got problem again with my Ford focus 2000. Passenger side window stopped working, without cracking, or anything. The day before was working and the other day, nothing, pressing that switch and nothing even sound or cracks. What could it be? My car stays outside could it be from the rain that we have these days in my country?
    Thanks in advance, I hope for an answer from you :)

    • @1AAuto
      @1AAuto  10 лет назад +1

      Thank you for watching! It could be the motor or the switch. To verify the door panel will need to come off. You then disconnect the electrical connector for the motor and put a test light/multi meter to the vehicles side. You should have power at the connector when a activating the switch. If you have power in both the up and down positions then its most likely the motor. If you find you have power in one direction but not the other then you know it is the switch. Hope this helps!
      888-844-3393

    • @DJMilsen
      @DJMilsen 10 лет назад

      1A Auto Parts Thanks for your answer 1A Auto, you never let me down. Yesterday I red some "bro tip" from a guy that had this problem. Turns out that if I click on the switch button and hold it, while slam the door it got it work again. Now it works without problem. Do I need to clean the motor for this not happen again (some WD40 or..)?
      Thanks man and cheers :)

    • @1AAuto
      @1AAuto  10 лет назад

      Milan N.
      You can use a spray White Lithium grease, it is tackier than WD40 and will stay in the tack.
      888-844-3393

  • @1AAuto
    @1AAuto  11 лет назад

    Thanks for watching. Have a great day! 1aauto.com 888-844-3393

  • @flunder099
    @flunder099 11 лет назад

    How did you remove the windows ?

  • @Mattdotnfo
    @Mattdotnfo 4 года назад

    Thanks, broke all the clips off the fucking door handle

  • @1AAuto
    @1AAuto  11 лет назад

    You're welcome. 1aauto.com 888-844-3393

  • @xESPplayer500x
    @xESPplayer500x 4 года назад

    Hard to stay focused with that pink cadillac(?) to the side

  • @roldanalarilla649
    @roldanalarilla649 5 лет назад

    hello sir how are you i need this parts power widow regulator to my car ford focus 2004 driver side how to order on line im living saudi arabia

    • @1AAuto
      @1AAuto  5 лет назад

      +Roldan Alarilla You are more than welcome to order the part from our eBay store!

  • @aaronhiler6733
    @aaronhiler6733 7 лет назад

    there's no video on how to replace the actual glass on f150

    • @1AAuto
      @1AAuto  7 лет назад

      +Aaron Hiler We currently do not have an auto repair video on that particular repair. We'll keep this request in mind in the event that we need to make this repair. 1aauto.com

  • @dopemanricky7196
    @dopemanricky7196 5 лет назад

    Just put my passenger side in and theres no power 🙄