I did this and it worked. Cleaned the connector even tho it looked perfectly clean. Honestly can’t tell from the vid or from looking at mine what exactly was misaligned. Must just be finicky as taking it apart and putting back together solved the error 15 issue for me. Thanks.
Man, thank you very much, I took it to the repair shop 3 times and they told me that no defect was found, so I found you and it helped me right after the first video, thank you very much
I don’t even have a Xiaomi, I got some generic branded scooter and this worked! I didn’t know what I was doing, some of the parts were slightly different.I just took it apart and put it together again and the error went away 😂 Thanks bro
Thanks very much. I was just about to order a new battery then see this video. I noted you need to have the magnet the correct way around or the scooter thinks the brake is engaged and applies motor breaking. I also had to super glue the magnet back in place to keep mine functioning correctly. All in all a great free fix.
Thanks for the video. I couldn't see an alignment problem but testing showed that it was the magnet sensor that caused the error. I pumped the brake lever several times roughly and eventually the error went away. Hopefully this works and if not I'll simply get a new lever.
I really appreciate this post, my grand daughters scooter stopped working after she came off. I tried just taking the sensor out as many posts suggested. I luckily came across yours which clearly explained the way it worked, just as you said the magnet had been displaced. Once replaced, it worked, so thanks again.
Check motherboard (controller) if you have another scooter of similar model you can try replacing it (at least to check if it is controller) and see if the issue is really there.
Hi, I opened my brake but I’m not sure if I lost a piece as the level is moving toward sides a bit, and the scooter stops suddenly without error or slow the speed down. Could you help me please?
Lo he conseguido arreglar, pero no entiendo porque ahora el gas no funciona y se frena como la rueda delantera. La luz roja no deja de parpadear a noser que pulse el freno, lo contrario vamos
As far as I know - once it is activated - the cruise control is getting deactivated automatically and the recuperation of energy will start - the front wheel does have a break through giving the power back to the batteries.
I did this and it worked. Cleaned the connector even tho it looked perfectly clean. Honestly can’t tell from the vid or from looking at mine what exactly was misaligned. Must just be finicky as taking it apart and putting back together solved the error 15 issue for me. Thanks.
Glad it helped
Opened up the brake as per your instructions , put it all back and the error has gone 🎉 if you are ever in Bratislava I will buy you a beer.
I am gonna change my mi 1s pro then i found Amazing Man, your video save my scooter and perfectly solve my scooter issues once again thank 💓💓 Man
Man, thank you very much, I took it to the repair shop 3 times and they told me that no defect was found, so I found you and it helped me right after the first video, thank you very much
Great. Thanks
I don’t even have a Xiaomi, I got some generic branded scooter and this worked! I didn’t know what I was doing, some of the parts were slightly different.I just took it apart and put it together again and the error went away 😂
Thanks bro
I ll try the same hope it works haha😂
Thanks for a quick stress free solution!
Thank you. Great that it helped you
Best tutorial video ever, thanks! 🎉🎉🎉
Great. Thank you
Ur the man u just saved me £400
Glad to hear that from you. Thank you for your feedback
Thanks very much. I was just about to order a new battery then see this video. I noted you need to have the magnet the correct way around or the scooter thinks the brake is engaged and applies motor breaking. I also had to super glue the magnet back in place to keep mine functioning correctly. All in all a great free fix.
Thanks man. Great it helped you
Thanks man you help me to solute my problem very quickly😊
Thanks a lot it works within 10 to 15 minutes
Thanks from Italy…. Grazie mille fratello
Glad it helped. Thank you. 🤝
Thank you, worked like a charm!
Great it helped. Thank you
Thanks for the video. I couldn't see an alignment problem but testing showed that it was the magnet sensor that caused the error. I pumped the brake lever several times roughly and eventually the error went away. Hopefully this works and if not I'll simply get a new lever.
Hello Vincent, great video. I have this model scooter. Love the accent too. Love and light from Bonnie Scotland.❤
Dzięki, dzięki tobie naprawiłem hulajnogę po upadku, odpadł magnes
I really appreciate this post, my grand daughters scooter stopped working after she came off. I tried just taking the sensor out as many posts suggested. I luckily came across yours which clearly explained the way it worked, just as you said the magnet had been displaced. Once replaced, it worked, so thanks again.
Glad it helped. Thank you
Followed the video, Fixed ! Thanks
Glad it helped🤝
You are boss man, u saved my life😅❤
Glad to hear it from you
Just fixed the problem following your video, thanks a lot and greetings from France.
Hi, thank you for your video it solved the problem with my scooter.😀
Very helpful and useful to know. Thank you Sir.
Glad it helped
I cleaned up with contact cleaner without opening working perfect 🎉
Thank you man, my problem is solved
Great
ty man, really helped me out
Great. Glad it helped
it's done so good bro thank you for teaching that
Thank you
Dziękuję, udało się 😊
Thank you so much this really solved my problem
Thank you 😊😊
You're welcome 😊
Great video…. Thank you 🙏
Thanks you saved me ❤
Thanks!!!! This worked
Glad it helped. Thank you
Very useful video thank you! I fixed my scooter 🛴
Great. Glad it helped
Best of the best..❤
Thanks, good video
Thank you
Thanks man, in my case all it took was to squeeze the hand brake a few times and the error reset it self.
Great. Sometimes it is just a connection between wires (where it is plugged in)
Thank you bro ❤️
Thanks so much!!
Thank you
hi did you change the magnet of the hand break ?
if you found the previous one - just glue it with the right side. If not - then is better to replace the handle with a new one
Thank you!
This error occured in my xiaomi mi 1s after I hit a curb... I tried what you did in the video but it didnt help what else could be damaged?
Try the connection of the wires, where the plug from break connects to the socket going to display board
Or change the break lever to a new one. Just order a new break lever
@@vincentcyprus Thanks Imma try it tomorrow!
@@vincentcyprus I checked it one of the brakes wires got smashed on the impact thanks for help!
Thanks
Thanks bro
Thanks
Thank you.
thank you
my scoot is error 16 do you have any idea how to fix it? i already check the motor wires and controler but nothings happen still error 16😥
Check motherboard (controller) if you have another scooter of similar model you can try replacing it (at least to check if it is controller) and see if the issue is really there.
Hi, I opened my brake but I’m not sure if I lost a piece as the level is moving toward sides a bit, and the scooter stops suddenly without error or slow the speed down. Could you help me please?
Check the spring. It should be located on the bolt
What parts are needed for this procedure
for me personally that problem was caused because i had a flat tire see if you your tire is a bit flat and just pump her up
pull the break, turn on the scooter, release the break and the error will be gone. Thats how I did it.
Hello, will this process resolve the jolting issue when accelerating?
I don't think so. This is related to breaks only.
Thank you man,works perfectly
Спасибо! Пыль была, я раскрутил и смазал спиртом датчик и ошибка исчезла
Супер. )
I have placed a 48v battery and now I have the problem that when I press the brake it accelerates any idea what it could be?
thanks bro you are the best😁
Thank you
What should we do if our sensor cable is broken and we don't have a spare part?
To buy a new break lever
I have seem to be getting this error when I turn the controller it sounds like the motor spins butturn
Lo he conseguido arreglar, pero no entiendo porque ahora el gas no funciona y se frena como la rueda delantera.
La luz roja no deja de parpadear a noser que pulse el freno, lo contrario vamos
I’ve got this problem but I’ve got wires that come out ! Please help me
I replaced the brake but it stills shows error 15 idk what to do now
thx it worked but it does not accelerate after i fixed it it wont accelerate
Please I have a problem with my charging system
This is the common issue when the battery get old and each next charge it will be harder to charge it.
What does the magnet sensor do
As far as I know - once it is activated - the cruise control is getting deactivated automatically and the recuperation of energy will start - the front wheel does have a break through giving the power back to the batteries.
nice jkob make better
How to fix Error E1 and E2?
Svp E4
Ёр инглиш пёфект, май инглиш ис чикин
Найс ту хеар ю. Хэв э лавли Дэй:)
Почему по русски-то не рассказал?
Thank u bro, its i what i need. When i want bin my scooter i find your movie, 5 min and its work again. 🫡
Thank you. Great to hear it from you.
Thanks you