BMW E46 318i: M43 Engine Temperature Sensor Replacement
HTML-код
- Опубликовано: 8 сен 2024
- The engine temperature gauge has been showing red even from a cold motor so I suspected the engine temperature sensor has failed. In this video I go through the steps to replace the sensor.
Note: My videos are not a tutorial/how to. I am not a qualified mechanic so please refer to your workshop manual with your work. Do not use the content on my channel as a replacement for a workshop manual or mechanic.
Hi Robert, my name is Mario Great video! I’m an e46 318i owner from Sydney... I really appreciate your work.. there aren’t many videos out there working on this BMW model, most are on 325 or 330, but this is, I think, is the only Chanel on this 4 cylinders M43 engine... please keep posting, I would really appreciate it.. thanks for your time and effort.
Thanks Mario. I noticed that too, nothing really on these smaller engines do did figure my vids may be of use. Cheers,
Ps - my name is Carlos ;)
@@rovertasmania7033 11.ddd
Indeed. The mighty 23 year old m43tu in my e46 thanks you aswell 😬
Hi, you Sir are a lifesaver! I have just bought the same car, it's 25 years old with only 66340 miles on it. Following you I am doing the full service changing all the fluids gear box included I would be stuck without you. You are my hero, thank you. 😁🤟✅
Thanks but remember these videos are how I do things, im not a mechanic. So of course always refer to the manual ;)
Thank You for excellent video! This is actually so far the best instructional video for removing upper intake manifold on M43TU E46.
Thanks for the video. I fixed the same problem with your help today. Needed about 1.5 hours for that job.
Thanks so much for this video! This seems to be the only one out there. I appreciate you taking the time to show everyone how it’s done. I think it’s relatively the same process for the M44. At least I hope lol! Thanks for the help man! Can’t wait to replace mine
Thanks for your comment, great to know it can be of help. Good luck with yours.
Merhaba sorun tam olarak neydi neden ısı müşürünü değiştiniz
Thanks for the video. Seeing other people work on their car always gives me more confidence to work on my own. Keep up the good work
Thanks Douglas. I am the same, im a visual learner so use youtube to learn new things, like framing a house at the moment :)
Thanks the tutorial worked like a charm! I used 22mm 1/2 to remove the sensor.
The video was great! I fixed the same problem and followed your video. Very helpful. Thank you.
Fantastic to hear you fixed it... glad the vid helped.
Detailed and clear video . The best
Thanks for sharing your knowledge on this engine, I did not know about that particular sensor before watching this video, also there you showed how to replace an air pipe that I have to, and you just pulled it off in the intake dismounting process, well done, you also taught me how to change that pipe , thank you! awesome !
Thanks for your comment, glad my vid helped you.
i did not know about the temperature gauge until now thanks for the video
You're welcome.
Thank you. Still helping people 👌🏻
Only paying it forward as others helped me on RUclips too 👍
Chears Mate...thanks from Greece!!!
AHHH I LOVE YOU i searched so long for this fu**er and i couldn’t find it
Thanks sir, i'm live in vietnam and i change finish thanks
👍👍
Thanks man, what a god damn job just for a sensor. Nice video
Yep sure was a pita! Cheers
Thanks a lot !
Solo a los ingenieros de bmw se les ocurre poner un sensor de temperatura relativamente incomodo de cambiar, algo tan importante como eso debería de estar mas accesible como en todos los carros
Hello!! thank you for the video.can i move my car with this problem???
Very nice video ! 잘 감상하게되어 감사합니다
Subbed great video
I need it done but looks a nightmare 😫
Yep it is hut well worth it of course. Also can do by taking off intake manifold.
Thank you for this excellent video Mr. Robert. I myself own a 518i E34 with a similar M43 engine and might just have to replace my coolant temperature sensor too.
I had one question in mind; Is it crucial to know the exact Nm when tightening the upper intake back again?
I just usually check to see if there are torque specs, but usually small bolts are not so use correct judgement to determine how tight.
Hey man, great video. I wanna ask, can i still use the car when the ect sensor is still fail? Thanks
hello dear sir , i just wanted to ask you i have the same problem in my car and i want to order this sensor the question is .
is it called oil temp sensor or coolant temp sensor ?
thanks for your hard work ❤
I'm wondering if the sensor can be accessed from under the car.
thank you for the tutorial, what are the symptoms of bad temp sensor ?
The temp gauge needle went to RED when engine is cold.
@Dr. Fill Gut It could be, just disconnect and try it out.
Thanks man for your help till next time i have enjoy the way you show how to fix that promblem
Thanks for your comment, I appreciate it.
Nice video dude.
My e46 320d keeps the engine fan on all the time and the temp goes to red as soon as I start the car .
What sensor shout I replace?
Sounds like the same temp sender. Look up realoem.com for parts listings.
you r my god thank you!
🤣🤣 thanks
Hey man, can you tell us the names of the tools we need to do this?
So I can google them to buy them locally.
What size spanner is needed to open the sensor? Please help me. Tq sir.
شكرآ على الفيديو الرائع ولكن كيف أضبط حراره المحرك في المناخ الساخن مثل صحراء أفريقيا
Hi,i have the same problem but i change this sensor and now the water stay in the same position on red.what can i do?
Have you tried clearing the codes? On mine, i turned the ignition on but not started the motor. The gauge needle slowly went back to cold as it was a cold engine.
Hello can you tell me if your 318i have to fans. Thanks
Muchas gracias
De nada loco :)
How were u able to unscrew that thing??? I have literally no acces to it
Unless you have the engine codes to that I would go to flushing the radiator first oil change catalytic converter blockage then the sensor
nice job ,im about to do the same , can you tell me if there is new gasket needed for the intake manifold reassemble?
I didnt remove the manifold at all, just squeezed my hand inside after I removed the coolant hose elbow (as in my vid). If your going to remove the manifold, then I would think there is a gasket, check realoem.com for parts needed.
@@rovertasmania7033 ok thanks for the answer, did it yesterday, new gasket was not needed ;)
Thanks. What error code is shown on the scanner if this sensor went defective? In my case the ect sensor was replaced against code p0116, but the error code remains and engine doesn't start intermittently. Probably I was wrong.
Cant remember what the code was sorry. I generally look at the codes as a potential guide, but don't trust them. I just diagnose the issue, guess I'm old school.
Some of the most beautiful cars in the world.. but such a pain in the ass to fix even the dumbest problems!
100% agree, but then again they never engineered them to last this long, pitty really.
Hey mate, mine does similar but doesn't have any problems starting or driving. Could mine possibly be only the one on the radiator hose that needs replacing?
The one in the radiator hose is to trigger the thermo fans for the aircon, or turn off the aircon after certain heat (cant remember). Your problem could also be something else, perhaps a faulty gauge or other issue... need to check your codes.
@@rovertasmania7033 how do I check them?
LARYNX OFFICIAL u
You need a code reader. Look them up, they are cheap nowadays.
The sensor you took out looked slightly different to the one you put back in is that fine ?
Thank you I was not aware of the Engine temp sensor. Great job.👍
Merhaba sorun tam olarak neydi neden ısı müşürünü değiştirdiniz
Hello :) I have that same problem but a cant start engine. Temperature gauge going max. I must make several time ignition switch and i can engine start. Many people in internet was sayd its DDE problem. I dont know everything i checked.
Replace this sensor and it may be resolved. I had similar problem, when sensor was bad it was hard to start the car after stopping for a while, engine still warm but needed several cranks to start. Now in have no problems, so first change the sensor then see if the problem persists.
Hello
I chanfe the sensor, but water temo goes on red,and car not start. Not conect whith on obd...can you help me.
did you have to drain any coolant?
No, i didn't touch it at all and checked the level, made sure no air was in system afterwards.
@@rovertasmania7033 oh thanks.
Temperature gauge slowly reaches to normal operating temperature but never goes to red I suspect it's my thermostat can you tell me what sensor control the on the cluster
That sounds like normal operating temperature, why would you think it goes to Red? Mine jumped to Red even when engine cold, and to max needle position. Your scenario sounds different.
@@rovertasmania7033 well I have p0117 code engine coolant temperature changes between 99 C to 94 c am using app call torque and have pending code
Hi Robert. There is no need to drain out cooling fluid?
No, mine didn't loose coolant. Carlos is my name, lol I think Rover gets confusing with Robert.
What causes low input my ect
Very good video ! But not need to drain coolant before ?
Thanks. I didn't drain and no coolant leaked out for me.
did the machine run normally before replacing the sensor
Yes, except on start up when cold it sometimes took a bit to start.
And some people say Series Land Rovers are tricky to work on..... 🙄
Heya rusty. Yep give me old car any day!
👍🏻👍🏻
Is it reachible from underneath ?
No, only from the top.
I did it thanks with the right tools
Tools more then €100,-
Sensor €20,- / €30,-
ok, and what do i need for diagnostics other than computer 🥺
Just buy the obdc tool to read codes and clear them.
i have a problem when cold start .... the rpm drop from 1000 to 400 and then going up back to 800 after the ac kick in .... then the rpm slowly rising up to 1000 and after few minit it stablize back to 800 ..... some ppl said it was a sluggish rpm because of the fuel filter is bad but i have replace it and still same .... is it posibble the cause was this sensor and i dont have any problem with the temperature needle and crank ..... the only problem is the rpm drop for a while and it looks like this sensor is not sending the right signal to the ecu for the right fuel ratio to the chamber and perform auto choke crank .... im afraid if the rpm is low it will cause the engine dont get the proper lubrication during the cold start ...
This is complex, many possible issues. Are you getting any codes? I have intermittent low idle sometimes, also fixed with turning air con on. I haven't looked at it closely as its not bad.
Pls help was the code p0116 ?
Cant remember, BUT if you have the temp gauge showing red and the engine isn't, then this is the sender unit to replace. No its only accessible from the top.
Rover Tasmania thank you so much 👍🏻
++++++++++++++++