BRO THANK YOU!!!!!!!!!!!!! legit gonna try all of this, my stock build doesn't sound bad at all but i definitely want more flex and a more consistent sound
Try to put all the stock foams instead of poly fill and put 3 layers of tape on the back of the PCB. It's even better, like freaking thoooooocky. But the flex is gone, so if you dont care about the flex (I dont understand the hype, I hate flex keyboard lol) then go for it.l@@tuborgselim876
Hmmmm... I did the same mods than you except for the PE sheet under the plate... my build sounds almost identical... I might go ahead and add more Poly-fil and the PE sheet to get the same sound profile as you! It sounds even more marbly than mine! Great video! :D
have u tried other popular or good stabilizer mods? Would it be better to use a different one because I'm not sure how long and efficive the holee mod lasts compared to other stab mods
have you ever tried keebtape or should i stick to normal masking tape for this, how would keebtape change the sound profile? For the PE foam and polyfill is there a specific place you get it from or anythingin particular i should dknow?
For me I kept the case foam. I didn't like how muted the poly fill made my m1 v3 sound, it was too muted. For some reason the case foam sounded louder. It may be that I used too much polyfill
yo im planning on building this exact same keyboard like how you did, but do you still recommend the yellow switches? or now something else 7 months later?
i'm pretty sure those teflon pads are meant to be used on the case instead of the stabilizers, the ones i received are properly shaped to fit around the screws.
Just waiting for my M1! did you let the stabilizers sit in the pe foam or did you cut it enough for them to sit on the included stabilizer pads with the foam around them? Also, is eva foam as good or better than pe or it doesn't really matter? I'm planing to do the same mods for mine thanks for the great video!
Did you ever tried another variant ? Like one eva foam + polyfill switch stab poron kdbfans + pe foam ? 3 layers tape mod ? In my mind he could dampen the sound a bit while making it still creamy. But he could destroy it aswell lmao.
Regarding the PE foam, do u simply just insert the switches through them and they’ll pierce through with no issues to the switch pins? Meaning I only need to cut out the stab holes?
@@giankeebs Thank you for taking the time to reply. I honestly appreciate it. One last question and I wont bother you further. The PE foam goes above or under the plate foam (might be a silly questions)
did the balancing off cam, just adjusted the wires a bit as they were really balanced even stock. You could use the stab pads I guess but the bandaid serves the same purpose, but people could go with the pads if they like, same thing.
BRO THANK YOU!!!!!!!!!!!!! legit gonna try all of this, my stock build doesn't sound bad at all but i definitely want more flex and a more consistent sound
i just tried this build and it came out exactly how it is in the video. Appreciate the content!
That is absolutely WONDERFUL to hear!!! Any tips??
I didn't believe it when I saw this comment and I did the same as these mods. It really was the same. I apologise for not believing it.
Try to put all the stock foams instead of poly fill and put 3 layers of tape on the back of the PCB. It's even better, like freaking thoooooocky. But the flex is gone, so if you dont care about the flex (I dont understand the hype, I hate flex keyboard lol) then go for it.l@@tuborgselim876
Loving the sound of this keeb! Great vid
Thanks the tape mod and polyfil changed my M1 for the better. Now the board has flex and a far better sound then with the two layers of foam.
I just did this build, apart from the stabs and man it sounds nice. Thank you!
The sound is delish 😋 🤤🤤🤤, great job!
Damn good sound. Thanks for the content!
You Sir, are a Legend!
Just finished rebuilding my M1 and it sounds so much more to my liking now ❤
niceee build bro
You’re so underrated, and you deserve more subs!
Well built!
Hmmmm... I did the same mods than you except for the PE sheet under the plate... my build sounds almost identical... I might go ahead and add more Poly-fil and the PE sheet to get the same sound profile as you! It sounds even more marbly than mine! Great video! :D
Magic bro!!
Thank you man
have u tried other popular or good stabilizer mods? Would it be better to use a different one because I'm not sure how long and efficive the holee mod lasts compared to other stab mods
Thank you!!!
thanks so so much
have you ever tried keebtape or should i stick to normal masking tape for this, how would keebtape change the sound profile? For the PE foam and polyfill is there a specific place you get it from or anythingin particular i should dknow?
For me I kept the case foam. I didn't like how muted the poly fill made my m1 v3 sound, it was too muted. For some reason the case foam sounded louder. It may be that I used too much polyfill
yo im planning on building this exact same keyboard like how you did, but do you still recommend the yellow switches? or now something else 7 months later?
I'm new to keyboard modding. Does it matter what kind of masking tape I use? Could you tell me what brand yours is of?
I just replaced the stock foam to poly fill today and man, my M1 sounded so good w it and each key has a balanced creamy poppy sound
was there a big diff between stock foam and polyfill?
@@rendomize3954 more like the sound profile is different, polyfill sounds poppier and creamier compared to stock foam
Hey can I ask if you use poly fill, will the keyboard be durable?
@@meanquaan965 no lol
@@fattyqueen0206 lmao r u still using M1 at the moment?
Delicious
do you recommend change the plate to pom plate??
Is it safe to use polyfill mod in the long run for wireless keyboards? An answer will be appreciated
i'm pretty sure those teflon pads are meant to be used on the case instead of the stabilizers, the ones i received are properly shaped to fit around the screws.
yes they are, but they can also double as padding for force break mod since they include a lot
Just waiting for my M1! did you let the stabilizers sit in the pe foam or did you cut it enough for them to sit on the included stabilizer pads with the foam around them? Also, is eva foam as good or better than pe or it doesn't really matter? I'm planing to do the same mods for mine thanks for the great video!
yes i cut the part where the stabs sit. Eva foam serves a different purpose than pe foam. Eva is for muted sound, pe is for marbly/poppy sound
@@giankeebs Awesome thanks! I like the idea of a more muted sound I have both forms of foam so I’ll try it, hope it fits as good as Pe
What keycaps you use ? it's orange text on keyboard ? please give me a link for buy.
Did you ever tried another variant ?
Like one eva foam + polyfill
switch stab poron kdbfans + pe foam ?
3 layers tape mod ?
In my mind he could dampen the sound a bit while making it still creamy. But he could destroy it aswell lmao.
havent yet as these were specifically requested by the clients but if i ever get the chance ill post it
@@giankeebs Great ! thanks for answer as always
may i know what screw driver is that, having a hard time unscrewing the pcb
did you remove all the foam or just the one at the bottom?
Regarding the PE foam, do u simply just insert the switches through them and they’ll pierce through with no issues to the switch pins? Meaning I only need to cut out the stab holes?
yes just stab through them, though i cant really guarantee that it will work for pe foam thicker than 1mm
@@giankeebs Thank you for taking the time to reply. I honestly appreciate it. One last question and I wont bother you further. The PE foam goes above or under the plate foam (might be a silly questions)
@@Jankylulu under the plate foam
regarding PE foam, did you switch out the included IXPE switch pad for the PE foam?
Did you find answer?
I'm a noob and I'm about to build my first keeb, but I think that PE foam works as a switch pad replacement.
Is tape mod safe? Sorry I'm new to this
so why not use the included sticker pad that you stick on the bottom of the alu frame? polyfil better?
not sure but i think that was for tape mod so i didnt include since i did the whole tape mod myself
for the pe foam, did you take the plate foam out and swap it for the pe foam, or are there 2 foams inside
both pe and plate foam are there
Your sure? because I can’t see the plate foam or you did it off camera? :)
@@Jankylulu Yes. Just not on camera but its there.
Do you find the polyfill to affect the sound or not really?
yes it dampens the sound compared to no polyfill
Tempest mod & polyfill together? For what?
sounds like hip cracked
What keycaps are you using?
did you replace the poron foam for the pe foam?
yes
Can i have the name of Keycap in this video ?
where do you get your PE foam?
on shopee, local sellers
Thocky
Where did you buy this? I wanna buy..
from shopee
whats your main keyboard?
mw65
I've done the same build and brought it to the office. Oh boy, how I wish I didn't do it.
Wait why?
@@DvineDragoon the sound profile stands out so much from the usual membrane kb to the point that it reverberates in the office.
@@ImInTheMakinggotta assert dominance over your boss
@@DvineDragoon I'm trying to entertain every questions my colleagues have related to mechanical keyboard to influence them in buying one lol
@@ImInTheMaking I just let them use my spare keebs lol
how does it sound with stock case foam?
Dull !
that's WOB SAL profile keycaps you used. Not the Black and Gold. I can tell cause I own them both.
These are black and gold as shown in the video. YELLOW legends in black and gray base. WoB is WHITE on BLACK base :)
Why does everyone do the holee mod. You dont need it if the stabilizer hoousing is not moving.
Your keychron q1 too ? Same 1mm pe foam??
yes
@@giankeebsThanks:) 0.5mm pe stock foam and 1mm pe very different??
@@user-gh2ww2kk4n not that different but you will hear the difference
mousepad??
The stab pad could also be used for forcebreak too and u didnt balance the wire yet….
did the balancing off cam, just adjusted the wires a bit as they were really balanced even stock. You could use the stab pads I guess but the bandaid serves the same purpose, but people could go with the pads if they like, same thing.
Ты бы еще сена туда напихал!
auto subscribe ka sakin lods.