2020 DIRT JUMP BIKE CHECK PLUS UPGRADES!!
HTML-код
- Опубликовано: 16 окт 2024
- Here's my 2020 dirt jump MTB which I've ridden all year so far. The Marin Alcatraz hardtail is the dream. This would have been the bike I raced speed and style at Crankworx Rotorua where the slopestyle contest just went down! I love this bike so much, riding it and talking about all the key little features. But it's time for some upgrades!! So help me choose what new parts to add to this custom jump bike ready for some huge tricks coming up soon!
The most humble pro rider out there. Legend.
Just a living ad
I want to upvote this but it's at 69 amd it's the law not to
@Jack Wood gotta get it to 420 now
Have u ever seen loic bruni Sam Hill Aron gwin or can zinc
Cam mccaul*
Since you have done a couple of dream bike build would you ever consider doing a budget DJ build, going out finding good cheap parts to build a budget friendly DJ bike?
Would not make sense for this chanel i think
It would be great I reken
@@andrisvelmeris I think it would make a load of sense
I'd like to see that
MJ: puts a clunker together for about 100 quid, then says "let's just see what it can do at the skatepark"
Also MJ: does 720 and massive flair at first attempt.
Me: Sells jump bike. I need to find a new sport to get into...
Just wanna say that you're the person who's inspired me the most to get into mountain biking.
Hope blue back brake and try get that ohlins fork, everything else keep it the same.
He could be really fancy and get a purple like lever and a blue rear calliper you go with the frame
Joel Hazlett yes! That would look mint, love the customization options with hope and their quality is unmatchable just wish there products would be a bit cheaper.
It would be mint
the hope reach and bitepoint knobs are kinda sharp, if one ends up grabbing the lever body I think it would hurt more than other models.
Hope breaks are not good for dj cause of the bleed and tabs and hen u bar u break ur finger
Fork: Ohlïns RXF 36 coil 100mm travel
Brake: Shimano XTR
Cranks: Rotor inpower MTB DM 165mm
You don't want a coil fork on a dirt jump bike
Geko he has a coil on there now, it’s a fox with plush internals which means a coil conversion...
When is ur red bull project being released?
Ohlins would be sick with 100mm, would look sick matched w a gold hope brake too
32 (front tooth count)÷13(rear tooth count) × 26" wheel diameter = 64 gear inches. That is a hard heavy fast gear that will actually slow you down in reaching top speed. Most BMX racers, either 20" or 24" cruisers like to be in the area of 55 gear inches. Right now, I ride 60 gear inches and I find it just easy-er enough to get up to top end more quickly, and maintain top end longer without burning my self out. Being with dirt jumping, you're relying on your pump mostly, you might find dropping two teeth in front, putting you dead on 60 gear inches will be beneficial. You get up to top end quicker, with less effort. In case, you case or something.
This needs more attention since Matt did mention pedaling.
And what about when he needs little pedaling inbetween jumps(pump wouldn’t give him that)
But he has an oval chainring so the dead zone is about 60
Matt just start a sponsorship with öhlins
Yeeessssss
That would be sick
probably in the pipe lines. Spoke to them about building a DJ fork and they said they could not as a pro rider would need to ride them first aka Matt. I know i would buy one if they released one coming from a motorsport background would tie my two passions together
Umm u a time traveller or something
Aight lemme just pick the lightest parts I can think of
Brake: magura mt8 carbon
Cranks: raceface next sl(like the sixc but lighter)
Fork: rockshox pike DJ
When r y going to be working on ur backyard Matt. I can’t wait to see what u do with it
Probably when it starts getting dry in England
Fork: definitely team up with Öhlins, Fox is second-best if you can't. Brake: Trickstuff Piccola is super light, get the Trixer hose thing for barspins. Cranks: keep the current ones bc you can't get much lighter, or maybe do the custom colours on Raceface's Next cranks. Bar: if Gusset does a carbon bar, get that to save some weight.
We think alike.
You may want to look into Profile for a few different crank options. There are a lot of trail riders that use the Profile Elite crank sets with 22mm Ti spindle and Ti spindle bolts. They are spline drive and I believe come in a 168mm leangth. They use a 104bcd 4 Bolt spline drive spider with color options or a 5 bolt (I forget the bcd on that) also with color options. Options for crank arms colors are black or chrome. The crank arms are hollow cr-mo. Light, stiff and strong with the Ti options
Don't know if you have already looked into this, but if you do want to run a mechanical gyro you try using TRP's HY/RD caliper which is a hydraulic conversation caliper, it is kind of the best of both worlds. Ive run a pair on a CX bike and they were surprisingly, awesome! I may even put one on my Alcatraz...
Magura brakes are really light. I have mt7 and mt5 and they're both a composite carbon lever and master cylinder. It feels like plastic to touch but great power and modulation in the one kit. For a DJ set up, you may want to look at the mt4(?), the cross country calliper.
Really nice bike and explained perfectly in all details! I think "racesport" version of all continental tires are not tubeless ready... only "protection" ones are tubeless ready accordingly to conti
The pike DJ is very light and feels amazing and hope brakes are just the best easy to bleed work insane look factory!
Definitely go with the öhlins. Extremely well made with high swedish quality.
Totally right about the brake bro. You don't even need a hydro. I run a avid bb7 mechanical. There's a mtb and a road version. If you get the road calipers you can run a bmx lever, which are cool. But dont try and use the mtb caliper with bmx lever.
I would rethink the tubolito tubes. At crankworx this weekend you could see a couple of tire blow offs, and all of them had these tubes.
I'd rather run maxxis welter weight tubes bit stronger and almost as light
thats only because all the riders use them so they are the only ones that can blow up there lol
Valentin Maissen that’s why cushcore and tubeless is the way to go...allows you land way more sketchy...I use it on my la bomba and I only ride park and street
I’ve been waiting for Matt to be sponsored by ohlins for ages actually would be sick 🤘
For brakes you should go with Hope components. I am using them and they are awesome and you can choose about million different colors.
Can you run less spokes in front tire as the “triangle” in the front rim is bigger and also titanium chain if haven’t already got it 🤨
I use Profile elite hubs, single speed and no brake tab front. The hubs are laced to Loaded AMX rims. I weigh 250 lbs and have had no issues even with some hard landings.
Formula 6 bolt 160mm disc rotor claims 95g, and absolute black (same specs) claims 82g
Titanium cog if it exists? Just replace steel with titanium, and use aluminium with titanium when safe (excluding Gusset, although custom Gusset composite pedals for the pin placement?). What's the seat post clamp bolt made of? Does the steerer tube need to be that long? Lighter spokes and nipples if possible, safe, and allowed by Halo
That would be sick an Ohlins dj fork and also the Trickstuff Trickster might be worth looking into with a Sram G2 ultimate maybe? Also, the Sram XO1 dh cranks have a grippy pattern on them which could help with catching tailwhips which could be beneficial.
How an oval chainring works single speed I don't know but fair play you have managed it!!! Peace
I'm wondering the same 🤔
Hey Matt I honestly would just find the smallest and lightest brake out there, since power isn't a big deal with dirt jumpers but weight is.
it would be awesome if you could run öhlins on there, cuz no one else does that, and im sweedish; so that would be even cooler for me...
Jona Nolåkers szymon godziek does
Jona Nolåkers öhlins don't do 100mm
@@Trad_IsRad they could do a custom setup??
@@jjwood3929 Spoke to them about it and they would not talk to me saying they are working with their riders on it. I know i would buy one cause im a motorsport mechanic student
Yes finally a bike check please do more of these
Ohlins fork would be sick, remember to puts the decals on the wheels, get a hope brake in blue, cranks get whatever is light.
Hope blue brake and rotor with pink bolts and reservoir cap, Ohlins or rockshox pike DJ fork, Hope cranks. Maybe a fabric magic 50 to 01 saddest aswell. Keep up the quality videos!
Why are you and sam pilgrim every time together 😂
Maybe because the hours they post at work the best. To get the most of your audience watching the video you know, kind of youtube algorithm sort of thing
Basically Matt copied Sam when he saw his vids doing well
@@saints146able Sam thinks hes the fuckin pope or some shit with that stupid ass last name, toothless bandit
Hey Matt Jones! You can get below 10kg by keeping that hi rise handlebar and cutting the steer tube and ditching the top spacer! Ride ride ride!
you can remove paint off the fork's knobs to save 3g :)) you can also try an old avid xo brake cuz it's pretty light and powerful
Ohlins would be sick just for something different but obviously awesome performance too
You have the best intros just "hey people" best outro too "legends"
I’m running an Magura MT4 on my dirtjump und I’m super stoked with the performance und power. Could be worth a try
Matt I was sad to see you did not make it to Rotorua. I was looking forward to see you compete and complete an event at Rotorua.😀
you should defiantly put some scooter grips on the side without the break leaver they are very long and very comfy, ethic scooters have the most comfortable grips and a little tip most Australians like me do is put your grips in some hot water for 10-15 minutes then give them a good stretch and the slide them on your bars makes your grips longer and softer
The öhlins would be sick but it will definitely be heavier than what you’re running now and if you run it at max pressure as I’m sure you do with jumps why even bother?
You could try some sram xo1 dh cranks or descendant cranks, they’re pretty light in weight and if you get a smaller chainring but also downsize the sprocket in the rear to maintain the same gearing, possibly a 28 up front with a 9 in the rear it will save weight.
A carbon seatpost maybe?
Odyssey hollow pin key chain!! They’re gonna stop making them and you can take the pin out with an alen key! it’s strong and light
I think that custom öhlins would be sick as no other dj rider rides öhlins. For the brakes I think you should go for some brake force one h2o brakes as the lever is very discreet also they use water instead of brake fluid which is very cool.
Maybe consider BMX cranks? Profile cranks come in all lengths (including 160mm), and then you can get appropriate titanium axles. Would look sick in chrome on an alloy frame, and pretty different. Might need a signature Oval ring though!
Forks: 36 chassis is pretty much perfect, as you know, but its the inside of the forks that counts! Maybe look into some smaller companies that could tune how you want? Vorsprung? MRP? Andreani? Push?
Custom Hope single lever disc brake, a merge between the Race Evo X2 and Odyssey Monolever
RNC Ti 3 piece cranks are back on the market, they come as small as 155mm
I'd love to see a blacked out for such as the rockshox pike dj with oil slick decals as well as maybe a oil slick bmx style crankset and I love the idea of either a blue hope brake or a sram brake with the sram oil slick bolts🤣🤣
Go for a hope stealth X2 in custom purple and blue parts, would look very trick, and custom online fork are rad, arguably hope rotor to match
Hey Matt, you coud try one of those trikstuff hidraulic gyros
Matt could u maybe add links for every part u use on your bikes, so that newbie mtbikers like me can delve deeper and understand better what u are talking about?
Holins would be sick!
Magura brakes to match the green logos on the "inside" of the frame. Or trickstuff brakes to save some weight.
CRANK MUST TRY
You should really try out a set of Rotor R-Hawk 165mm cranks with 32T O-Ring.
I'd rate them stiff as Saint's but better weight, SUPER custom build, insane quality. They are just like Shimano - Fit'n forget.
If it was mine I’d get chrome hope parts I.e. headset spacers, brakes, maybe pedals, and seat clamp. Then I’d get silver halo stickers for the rims, and a full set of silver titanium bolts. Also a silver ab oval chainring and chain. And then finally a silver rockshox pike ultimate fork.
Shimano Deore XT brake 4 pot, either an Ohlins for or the new Marzocchi DJ fork spotted on Max Fredrikssons bike and hope cranks in blue
Black marzochi fork, Magura mt7 brake, xx1 cranks
as another fellow car guy, this was a great video like always! i like specs and details, keep it up.
You should try out Onyx Vespyr hubs. Quiet bikes are sick! And insanely quick with zero drag and instant engagement
Black Magura brakes would be the dream🔥👌🏼
Hard to argue with the pedigree of the Swedish suspension brand, but I'd quite like to see a Manitou Circus fork.
Hi Matt. Have a look at Hope tech Trial Zone and maybe a 140 floating rotor as they come in colours too. Maybe some Hope crankset too
Maybe worth looking at Ti spokes too. Oh and gusset oil slick chain
Matt get a trickstuff hydraulic giro those are pretty cool
you might want to check out their brakes as well for your enduro bike
Tip: I ride with a hope enduro 4 rim at the back, and front i ride with a Carbon dt swiss rim, Use a carbon rim up front to get it under 10kg
The saddle is sooooo sweet need to see more super seat grabs or decades on slowmo to show off that super saddle
you should use the RockShox SID Ultimate Carbon RLC3 forks and the SRAM X01 DH Crankset - BB3083 these are both carbon ans should get that weight down, for the brake you should use the Shimano XTR M9020 Trail Hydraulic Disc Brake Set this has a carbon lever and is a cross country brake so wont have too much power.
If you have the opportunity to run Öhlins - do it!
Brake and Cranks - Shimano XTR.
Absolutely awesome 😎 colors
Oil slick hardware SRAM level ultimates are the business in terms of lightweight brakes.
Marzocchi bomber fork, and a magura brake, hope cranks
Get Magura MT7 PRO may be a bit overkill but I can say with ease it’s the best brake I’ve ever owned
Lg1r cranks and Magura brakes. (Highlighter yellow they’d pop with the bike)
Very much 1080!!! When do we get a bagjump clip, if anyone can pull it you can just spot the jems 💎
Ohlins with pink ohlins decals if you can get them would look wicked or even a custom painted set of zebra print ohlins forks to match your DJ bike pink chain ring would look mental too
Hope is my shout for brakes but for weight Magura is right up there.
Interesting to see how few parts are available nowadays. Been out of riding for years, picked up a 26” frame to find it a pretty dead industry. Kinda sad really, really hope it returns to its former glory! Can’t even find many decent new 26” sus forks or wheelsets...
When are the frames avalible to buy love it very interested in getting one to try love the slammed look and the geometry
That hub though 🔥😍
I'd say that if you can get the Öhlins forks to work, you should do that, if not, well, many guys on the tour seem to run the Pike dj forks. Maybe see how they work for you?
Magura brakes are pretty cool. Some are carbon brakes so they are very light.
You should try rockshox pike dj so good for dirt jumping / slopstyle
it’d be rad if Absolute Black made you a chainring in the same yellow colour as the Marin lettering!
Im tempted to order that frame and build a dirt jumper over the next year
A trickstuff piccola would be a nice brake. Maybe they'll even sponsor you.
But i think it's havier
@@felixpbmx the piccola is the XC brake, i think it's lighter, but you could be right.
Get roxshock pike or lyric front fork
Get a bmx style chain ring that's light as it has less teeth it should he lighter
And I think that you should go for that xtr or maybe a magura because Sam seems to be doing good on them
I am riding the magura mt5 and its perfect on my dirt jump
Would you ride a slopestyle bike instead of your dirt jump on the massive jumps u do
Ohlins up front but why boost if wait is a consideration and pilgrims been using a gyro for ages with no probs??
Tubolito tubes save load of weight
Hope floating rotor in blue to match the frame sort of
Can you get blue or pink pins for the S2 pedals?
Hard to beat the race face cranks, hope cranks are nice but they would add weight
Helfare sticker🤘
Tie die dyed bro colour way
Hope seat clamp in blue?
Muc off pink valve caps
Even without out upgrade the current setup is🔥
That is such a sick bike! I wonder what the final bill for it is as it sits now. Matt is a great guy, love these videos! And he's incredible at riding!
I've got the same chaos wheel set on my Alcatraz and super drive it pisses my non bike mates of😂
Which one is he riding on?
MT SS with fat tooth cog? or DJD with threaded cog?
Riding a magura mt8 raceline on my dj bike and it's awesome! But of course you don't need that much of a brake on it I got it cause i was lucky!
Xtr are awesome they still ride out like cable
I reckon Cup 2s in 325mm would be good for rear tires
If you don't mind me asking, what is your headset?
Try dvo forks or deff olins but try some bmx cranks they deff make smaller ones just not sure if they would fit either out trying diff kind of bearings an go for a half link chain really strong an really good looking
Magura MT Sport brake, SRAM carbon cranks and Ohlins forks is a good setup I think
Rockshox pike please! It's lighter and with pink decals it would look sick!
SOO SICK BIKE !!!!!🤩😍
marzocchi did a Z1 DJ for max fredrickson, should try one if you can get your hands on one
Hey Matt have you ever considered DVO suspension?
james silveria please not
@@benediktbuhler9500 why?
Ohlins Forks - get it done!
Bomb proof halo combats
love ur vids keep it up