The production value of this channel is actually mental-- I cannot believe you are not at a million subscribers, man. Keep it up, glad I found your channel.
That introduction went astronomically hard, I still forget that you're not a larger channel because of the insane production quality. Love the content bro please dont stop!
Another outstanding video brotha. Pieces of advice for ya 1. If that rifle position was uncomfortable then try minimizing the bipod to make your rifle sit lower. Or just rest the mag on the floor and flare your elbows out a bit more. Key part about distance shooting is staying cool calm and relaxed. May have also helped to put your support hand on the buffer tube under your cheek as if you were shooting a m249. 2. Ammo is everything and it's not just the grain. Some ammo perform better with 1:7, 1:8, or 1:9 twists so it's a bit of research to do in regards to what ammo to run for THAT setup. Glad you recognized that though!! 3. I'd recommend an actual zero target 🏴👌🏽 Other than that brotha sweet fucking shooting glad to see it.
@nickcarter5569 Thats if they can actually deliver longterm, we will have to wait to see. If they go out of business in 3-4 years like a lot of these new AR startups it won't mean much. I do hope it works out though, just to early to tell if that aspect is a "good deal".
@@ms542 , I doubt they will go out of business, they have a parent company that does government contract work, I believe it is in the aerospace sector, so they have all the high-precision CNC equipment paid for, this is likely a way for them to fill more time in on their CNC equipment, so overhead is minimal.
You are a good salesman on this one, buddy. I'm in love ❤️ gonna cop the whole build, I think. I appreciate you. Thanks for the video, I realize it's oldish, but I'm only now showing you the just deserved props. Great work.
I absolutely love the quality of your videos and how awesome your firearms look fully built. I would love to see you create a budget A.R. 15 for those of us that can’t afford a $3000 rifle and a $2000 LPVO scope
This channel has become probably my favorite gun channel. Its a cross between Garand thumb and any high end Tech channel with the very best videography. Don't change, because this channel is set apart from all the others out there.
I purchased Black Arch holsters for my carry guns with your code, initially learned about them through you and since getting them I’m very happy I went with Black Arch!
Bro i can watch your videos all day, i wish they were longer but honestly the vids are good asf so i can’t complain at all! Keep up the good work brotha ✊🏽
Your videos blow my mind. For the long range you will have a way easier time if you get a rear bag. Probably have to get a 10/20 round mag and lower the tripod way down but it makes all the difference.
Absolutely phenomenal Carbine and review bro. This looks like a bad ass rig . 1.7 Height Mount is the golden ticket IMO . Not too high but not to low . S&B Short Dot Dual CC 1-8 is IMO the absolute best LPVO . S&B , NF ATACR and PA PLX-C are my top LPVOs.. I'm partial to FCD Ambi STS and Colt Ambi . Best safety's ever made IMO. I'm also Partial to BCM SOPMOD 1 Stock , Mod 3 GFG and Short VFG..
Wow this was a really great video! I like the transparency and also - can you tell me what your ambient background music is for the majority of the talking during the video I love it
What’s with the new trend of riser scope mount. Always the competition tacticool dude who wants to reinvent the wheel. It used to be that we would pick the lowest scope ring possible still provide clearance for objective bell. The idea is so that you dont lose any vertical adjustment. Riser just a way to flex your cash while missing at distance. What about keeping your head down in trenches, that’s why no one survive long enough to tell story of them using riser in war zone.
The purpose of the higher mount isn't just for aesthetics, it allows for a more heads up style of shooting, which can lead for faster target acquisition. Although, It isn't necessarily the greatest option for shooting in the prone. Its a similar height to that of a red dot on top of a carry handle, which has been a thing since the late 90s, if not earlier
@@CavemanActual11 it’s may be fudd lore but you keep your head down when shooting from cover, trenches and prone position from concealed positions when people actually shoot backI only see risers with T. rex arms RUclips commandoes. Fast Target acquisition is fine and dandy only when target don’t shoot back
You have gained a subscriber today (sept 2, 2023) I am very interested in this rifle. I hope to one day have a property big enough to shoot 1760 yards, but it won’t be with 556/.223.
The production value of this channel is actually mental-- I cannot believe you are not at a million subscribers, man. Keep it up, glad I found your channel.
Don't worry, he will get there.
@@willl4219 same thing I said.
Facts
I wish I could wrap my mind around this algorithm because this is AMAZING!
That introduction went astronomically hard, I still forget that you're not a larger channel because of the insane production quality. Love the content bro please dont stop!
That intro is insane. That Trac in the back drop, icing 😎
Bro how does this guy don’t have more subs …he’s videos is amazing and the setup is clean and the video quality is top tier
Because his channel name makes him shadowbanned and rarely recommended.
@@user-dw4cv3xq5u So it's up to us to share GUNMEN
@@Scout339th yessir
@@Scout339th yessir
because this content is cringey red it stuff
The edits and quality of this video are so good! That and a great review! Definitely see that this channel is going to grow fast
3:31 That transition between FDE and black rifle while charging was dope! I see you, big homie.
I gotta say that the intro looks VERY good. I can't believe you only have this much subs. This channel is really underrated.
Another outstanding video brotha. Pieces of advice for ya
1. If that rifle position was uncomfortable then try minimizing the bipod to make your rifle sit lower. Or just rest the mag on the floor and flare your elbows out a bit more. Key part about distance shooting is staying cool calm and relaxed. May have also helped to put your support hand on the buffer tube under your cheek as if you were shooting a m249.
2. Ammo is everything and it's not just the grain. Some ammo perform better with 1:7, 1:8, or 1:9 twists so it's a bit of research to do in regards to what ammo to run for THAT setup. Glad you recognized that though!!
3. I'd recommend an actual zero target 🏴👌🏽
Other than that brotha sweet fucking shooting glad to see it.
HUGE tips bro thank you!! Love it!
@Najhon Cherry brah great piece of gems. You got your channel up? I think you will do great providing content. Give it some thought.
Your videos are fucking amazing. I've never commented on a video before but my god.. the effort you're putting into the videos is unmatched. Thank you
Haha bro🥹 thank you
Terrific editing and video in general!! Keep em coming🔥
That was the BADDEST intro I've ever seen! Absolute perfection. Love what you do.
You have one of the best gun pages out there.
So glad I found this channel, man is a hidden gem
I love the amount of research and effort you put into every detail, and still able and willing to learn new things. Your execution is outstanding dude
The rifle itself has an MSRP of $2500 for those wondering. That’s stock, with no accessories or optic
It's seems to fit in line with the other expensive brands. I do wish it was cheaper.
@@Widemouth1832 cheaper or less expensive?
When compared to other brands *especially with the free parts upgrades for life*. Totally worth it. I almost want to call it cheap. Just my opinion.
@nickcarter5569 Thats if they can actually deliver longterm, we will have to wait to see. If they go out of business in 3-4 years like a lot of these new AR startups it won't mean much. I do hope it works out though, just to early to tell if that aspect is a "good deal".
@@ms542 , I doubt they will go out of business, they have a parent company that does government contract work, I believe it is in the aerospace sector, so they have all the high-precision CNC equipment paid for, this is likely a way for them to fill more time in on their CNC equipment, so overhead is minimal.
#1 reason why you don’t piss off Tactical Ned Flanders in that intro 🤌🏻🤌🏻🤌🏻 love it haha this rifle is SICKKKKK homie! Great video dude 👏🏻
Dude, your reviews alone are Tier 1. Thanks for the work you do to put such information out. And this rifle gets the chef's kiss! Beautiful!
First video I’ve seen by you. Couldn’t believe the amazing quality. I was pretty sold on the light fighter. Now it’s a done deal! 🤙🏼
Awesome content. Suggestion for zeroing, bring paper targets, you can tape them below steel target to get more info on hits. “Paper never lies”.
Just the way you put these videos together made me subscribe
Man that’s a gorgeous rifle and I love the setup
the warranty system is pretty freaking cool. Love your content brother.
You are a good salesman on this one, buddy. I'm in love ❤️ gonna cop the whole build, I think. I appreciate you. Thanks for the video, I realize it's oldish, but I'm only now showing you the just deserved props. Great work.
Can't believe I missed the last couple of videos. I remembered to hit the bell icon this time.
I absolutely love the quality of your videos and how awesome your firearms look fully built. I would love to see you create a budget A.R. 15 for those of us that can’t afford a $3000 rifle and a $2000 LPVO scope
I remember watching this channel when it had 3k followers, and now it is pushing up to the 100k mark. I'm glad to see it!
The content of these videos is amazing! I swear you have to live in my development or near it.
Yeah I can’t describe the atmosphere I get from this channel but it’s awesome and different keep up the awesome work.
Dude the fact that you aren’t at a mil + subs is crazy. The production quality is amazing. Love it and keep it up!!
The quality of these videos is amazing. Nice intro. You're going to make it. Be patient. All of this work will pay off.
Shadow ban makes sense. Your production quality is next level. You should be at a million subscribers.
This channel has become probably my favorite gun channel. Its a cross between Garand thumb and any high end Tech channel with the very best videography. Don't change, because this channel is set apart from all the others out there.
Best intro hands down
love the video, keep it up. By far the best review and build channel.
Been following you since you got started. Your quality of work is beyond ridiculous, keep it up, we appreciate it.
Can’t wait to see this channel blow up and get the credit it deserves 👏🏼 great video.
Sweet video bro! Loving the channel
FIRE INTROOOOOO! 🔥🔥🔥 From start to finish, excellent review, good lawd 🥵
Very good job presenting this rifle. I look forward to Moore from you. Thaks
I purchased Black Arch holsters for my carry guns with your code, initially learned about them through you and since getting them I’m very happy I went with Black Arch!
Awesome video brother!
Dude.... your intros are killer!🔥
Great video man!
Bro i can watch your videos all day, i wish they were longer but honestly the vids are good asf so i can’t complain at all! Keep up the good work brotha ✊🏽
Your videos blow my mind. For the long range you will have a way easier time if you get a rear bag. Probably have to get a 10/20 round mag and lower the tripod way down but it makes all the difference.
Great content as always!!! Keep it up
This channel is criminally underrated.
Love your content man. Keep it up!
Top tier vid like always. Were you shooting without ear pro in some of those shots?
that intro goes hard when you fire the gun the same time as the beat
Your content sets such a high standard
Always like seeing an upload from this channel, great video as always. You deserve more subscribers man!
I love these Broll scenes you do 💯🤞🏽it’s like a action movie
Such a great video!
Great video!
Great review.
May I ask, what camera do you use on your drills as well as your tabletop reviews? Thank you. Also thank you for some of the best content on the tube!
Outstanding video!
You’re gonna be on top one day!
Already know this is gonna be a good watch by the intro
Absolutely phenomenal Carbine and review bro. This looks like a bad ass rig .
1.7 Height Mount is the golden ticket IMO . Not too high but not to low . S&B Short Dot Dual CC 1-8 is IMO the absolute best LPVO . S&B , NF ATACR and PA PLX-C are my top LPVOs..
I'm partial to FCD Ambi STS and Colt Ambi . Best safety's ever made IMO. I'm also Partial to BCM SOPMOD 1 Stock , Mod 3 GFG and Short VFG..
You are insane dude. This editing is next level. Make a movie, I’ll watch.
Keep the content coming!
Well done video. You take the time to set up the targets why not re-paint them so the bullet strikes can be seen?
Nice work!
Bro that intro was sick.
That intro was awesome!
Wow this was a really great video! I like the transparency and also - can you tell me what your ambient background music is for the majority of the talking during the video I love it
Keep them coming!!
Great rifle and great video…. Good channel as well…. Where did you get that rail cover from? I would like one for my sbr
Killing the videos!! Bro keep up the great work!
This is an incredible video
THE INTRO IS FIRE
20:55 bullet wheeze is absolutely crazy
ok, 1) SUPER good video man! and 2)....did I see you on Full Time Filmaker? XD No wonder why your camera work is amazing!
Quick question, love the video why is your rear offset so far forward when you have rail space behind the LPVO?
Great question! It actually doesn’t fit as well as I want it to behind the scope mount, so for ease of access I run it forward of the scope
appreciation comment for the charging handle transition to your build
🥹 thanks for noticing. Spent some time on that
Would love to see a review and comparison on the Blackout Quantum DTL
Video review is a👍 but this RUclipsr has a lot to learn about bullet drop and long range basics and not just reviews on company’s products
Great content man, keep at it! Luv from Ohio.
Great video! Will you be doing one for your Omega 36M?
I always love your content…. What was the name of that song cause this intro 🔥🔥🔥🔥
So sick thanks 🙏
What’s with the new trend of riser scope mount. Always the competition tacticool dude who wants to reinvent the wheel. It used to be that we would pick the lowest scope ring possible still provide clearance for objective bell. The idea is so that you dont lose any vertical adjustment. Riser just a way to flex your cash while missing at distance. What about keeping your head down in trenches, that’s why no one survive long enough to tell story of them using riser in war zone.
The purpose of the higher mount isn't just for aesthetics, it allows for a more heads up style of shooting, which can lead for faster target acquisition. Although, It isn't necessarily the greatest option for shooting in the prone. Its a similar height to that of a red dot on top of a carry handle, which has been a thing since the late 90s, if not earlier
@@CavemanActual11 it’s may be fudd lore but you keep your head down when shooting from cover, trenches and prone position from concealed positions when people actually shoot backI only see risers with T. rex arms RUclips commandoes. Fast Target acquisition is fine and dandy only when target don’t shoot back
intro alone deserves the like
Great video
Great video. Question how does the vortex 1-8 Strike eagle differ from the Nightforce you’re now using? Any points you’d like to share? Many thanks
Definitely getting shadow banned. Your work is top quality. Always look forward to your content!
Great video!!!
Great Build!
I love your videos your voice and break down of everything make the video for me idc if you miss the target or not lol
You have gained a subscriber today (sept 2, 2023) I am very interested in this rifle. I hope to one day have a property big enough to shoot 1760 yards, but it won’t be with 556/.223.
What tape are you using on the bipod?
What hoodie and coat are you wearing in this video? I’d actually like to buy those!
Would be great to see how well those gas modules hold up over time, that and the lack of pinning are my only reservations.
I’m definitely getting one now after watching this. You have a discount code or do you know if they do mil discount? TIA!
production quality go crazy
the sounds of Bullets flying by in the movies are actually true lmaoooo.😂😂😂😂
what do you do for work?
X2 is a go! You can't beat the warranty. I'm still in shock the company offer this. It's their (USP) unique selling proposition. 😎🤜🏼🤛🏾
Right? How do they afford this though!? It seems like they would go broke lol
Try the badger mount 1.70