Again Manny thanks it's just so helpful to ask someone who is knowledgeable and are willing to help if they can. Do you know why the immobiliser chip is soldered on to the board...I have been searching for a answer to this. Sorry if I have taken up too much of your time. Hope your day has been good.
I ran into a problem. I wanted to program 2 extra keys for my 2002 Jeep Grand Cherokee for a total of 3 keys. When the SSB asked how many keys I wanted to program, I input 2. Then followed the directions on the screen. Only one of the keys would program, after testing. I then tried again, on the key that would not program, this time directing the SSB to program just one, but it would not do it. I am wondering if it is just a defective FOB, or if I did something wrong?
I read that with firmware update and TD232 cable will work on newer until you get to the PIN but my newest automobile is an 05 so I won't have that problem
Hi Steve thank you for the video ! Do you know if the SBB will program a 2009 ford ranger with no chip keys ( I have a regular key that is cut right and 2 blank new chip keys ... also which model would you recommend ) Cheers Derek
Hi Steve! Is SBB pro 46.02 work on older Honda models? I have Prelude Base 2000 and Civic XL 2003, and my daughter got CR-V 2005! I have purchased SBB Pro2 48.99, and it didn’t work on the civic and prelude! Could not connect with the civic ECU! With the Prelude gave me only one option : “Replace IMMO ECU”, and I did not go any further;-)! It connected with my sons Toyota Camry 02 with options to add Master and Valley keys, but I did not have blanks to try it all the way to the end! I got in touch with people in China from the factory, and being told V48.99 will not work on older Honda models! They said I will need V46.02 for my cars! Since You have V46.02, did You program successful any Honda from my Hondas generation! As far as I know the key chips from that generation are all “Megamos 13l Thanks for Your Help, and Kind Regards!
All the sbb you buy on eBay or Amazon are cheap Chinese copies it really only do Fords good most other vehicles the program won't say failed to communicate but the genuine SBB or TKO made by Elko will do all the Hondas I recommend buying the X100 pad to this will do what you want to do is a little more expensive thanks Steve
steves locksmith 211 steves locksmith 211 thanks for You quick replay! :-) I know it is cheap Chinese copy! :-) In the last 20 years or so, I have purchased many cheap Chinese products, and none of them was perfect! But with some effort on my side, 8 out of 10 did the job and saved to me a lot of expenses! The good thing is I can return them! If seller is shipping from US, they take them back and in many cases they even give You a prepaid return label! In some cases I have payed return shipping to address in US, but I always got my money back! I think it’s worth the try, and learning something always comes with some cost;-) I will try and let You know of my experience! If it doesn’t work, I will return it and get X100! Are there any cheap fakes of x100 too?
steves locksmith 211 steves locksmith 211 Is that what I’m looking for to do my Hondas? rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F323103523802
I am looking to get this for my 2002 grand cherokee, but don't know if it will support a 99-04 Grand Cherokee. do you know if that is in the Jeep drop down menu?
2002 Grand Cherokee uses a pin code type 2 system in order to program that car you will have to have the four digit PIN code or obtain it from a locksmith that is registered or dealer going to the parts department with your VIN number and tell them you need the PIN code the programmer I would use would be the x100 it runs about $300 it would be able to program that but it will require a PIN code
Thx...very helpful info. Did you return it? I also buy ebay assurance protection on it like 5-10 bucks more in case the seller plays ball? Can you recommend other tools that will do 'all keys lost' for newer cars ? Had anyone order SBB pro2 - I just did?
Interesting...my friend has the ssb33 the compatibility list for Honda civic says up to 2005 I have 2006 would it work would I mess it up if I try. (Do you know why) or can it be software update. Any information would be appreciated. I am in the UK. Thanks for your video. John
Most of the SBB on the market are Chinese copies the original cost around 7 Grand the Chinese copies aren't updatable the only run about $100 most of the software on them do not work the only time I got mine to work correctly was what I used with older Fords the programmer that you could buy that would work good would be the X100 Pad 2 that would have no problem for over in that car have a great day
Hello! Which one do you recommend for Dodge and Chryslers 2005-2009? I have the XPad, but I don’t how to read the pin or sometimes it doesn’t read it. Thank you!!
Older Chrysler's the programmers will not pull the pin code you'll have to get it right from the dealer newer Chrysler's program will pull the pin code the one I prefer is the X100 Pad 2 that's what I try first
@@steveslocksmith211steveslo8 can i do the 05 civic ex new ignition same immobilizer saying csnt find ecu after i put the new key that needs programmed in
unfortunately I found your video too late I also bought A1 and it doesn't do my 2012 Dodge Charger proximity remote so do you think that ck100 will do a Gen 4 proximity key for Dodge Charger
Hi Steve, does the 33 version program GM keys? I know you can on-board program GM, but I’m looking for a cheap Chinese machine that can reduce the programming time from 30 min to 12 min. I have the Smartbox, which can do that, but it costs me $10 every time I use it. Can this machine, or any other Chinese machine reduce GM programming time down to 12 min?
Mr. E I haven't done a GM with that programmer in a while but if I remember right I did do a Avalanche round a 2006 with it and it worked it does have a count down. Similar to a Ford I think it's I forgot how many minutes it is a sprite around 10 minutes 5 remember correctly another programmer we might want to look at it would be the CK 100 and the version 46.2 that's a newer version than this and I think it would cover more vehicles for you if you're looking for a cheap programmer so hopefully that helps you
Frank Torres all of these programmers program a key without having one that's what they're made to do is for locksmiths when people lose the keys for their car we come out and program a new key so they can go on their way some programmers do some cars good and some programmers do not do some cars good depends on the type of car hopefully this helps you think Steve
Thanks Steve for info. All of the videos i've seen always says input original key, then the key you want to program. I just need one for the Honda Accord 98-02 models. Any suggestion on a machine that works on them pretty good?
I'm not sure if it will work on that or not it is in the programmer but that doesn't necessarily mean it will work for this is a Chinese clone some stuff in there and does not work if I recall back I think I have programmed a Nissan but this programmer will not convert the PIN code you will have to order a pin code calculator there is an app you can download to do this you'll have to pull the BCM code first and convert that to a pin code before it allow you to program a key a programmer that will work would be the X100 pad2 this programmer is pretty decent programmer and should perform the procedure no problem it also has a built-in pin code calculator so you won't have to play pay for that app hopefully this helps Steve
@@steveslocksmith211steveslo8 hi, Steve, I got Chrysler pt cruiser 2007. Please let me know which unit will be able to read a pin code in order to add a second key for the car?
Ryan Guess no you will have to used a x100 pro programer this will pull the pin code and program the key or the ck100 will program the key it will no pull pin code . the sbb will not program any Chrysler cars. Thanks steve
I can't recall if I ever program that car with this programmer if you came into my shop I would probably use the xpad 2 100 or skp 100 the only thing this programmer does good is older Fords it may be in the menu but it doesn't mean that it would actually program it good luck thanks steve
Before I go on a job a check to AutoPro app on my phone and it tells me which programmer works the best for that vehicle it's app is provided by American Key Supply you just have to be registered with them a lot of use the app
The only one I know for sure would be a X100 Pad 2 but the skp900 might also do it but not sure I'll have to look in the menus of my real cheap ones to see if it has it but that doesn't mean it will do it but I'll let you know
Uriel Lopez no this programmer will not work for a 2015 that's a hundred twenty bit chip you will have to use the MVP Pro or a skp-900 to program that key thanks Steve
mr. fix it I'm not sure what you're talking about lock mode what kind of car and what model are you specifically talking about maybe I can help you thanks Steve
As far as I know the SBB is older technology and will only do Ford's older than 2010 if you'd wanted do newer cars you're going to have to get a tablet base programmer the one I prefer is X100 Pad 2
Hi, this item you have doesn’t represent all v46 trust me you’ve been robbed. The one I purchased doesn’t have a blue screen it has a green screen just like the v33... your tablet has blank software ours has the software. I think you bought a half chip or some alibaba one.
![[DRAGON BALL LEGENDS REVEALS ＆ STUFF] LEGENDS FESTIVAL 2024 Special Edition Part 2](http://i.ytimg.com/vi/af0phKxitX8/mqdefault.jpg)
Again Manny thanks it's just so helpful to ask someone who is knowledgeable and are willing to help if they can. Do you know why the immobiliser chip is soldered on to the board...I have been searching for a answer to this. Sorry if I have taken up too much of your time. Hope your day has been good.
I ran into a problem. I wanted to program 2 extra keys for my 2002 Jeep Grand Cherokee for a total of 3 keys. When the SSB asked how many keys I wanted to program, I input 2. Then followed the directions on the screen. Only one of the keys would program, after testing.
I then tried again, on the key that would not program, this time directing the SSB to program just one, but it would not do it.
I am wondering if it is just a defective FOB, or if I did something wrong?
I read that with firmware update and TD232 cable will work on newer until you get to the PIN but my newest automobile is an 05 so I won't have that problem
hey Steve you think this programmer would work for my 2010 jaguar xf
i have a version 48.99 have not used it yet. i bought mine on Ebay so i can return it if it does not work.
Hi Steve thank you for the video !
Do you know if the SBB will program a 2009 ford ranger with no chip keys ( I have a regular key that is cut right and 2 blank new chip keys ... also which model would you recommend )
Cheers Derek
Yes
Sir, can you help check if that unit can work on 2017 Mitsubishi Pajero Sport in Asia! TIA!
Hi Steve!
Is SBB pro 46.02 work on older Honda models?
I have Prelude Base 2000 and Civic XL 2003, and my daughter got CR-V 2005!
I have purchased SBB Pro2 48.99, and it didn’t work on the civic and prelude!
Could not connect with the civic ECU!
With the Prelude gave me only one option : “Replace IMMO ECU”, and I did not go any further;-)!
It connected with my sons Toyota Camry 02 with options to add Master and Valley keys, but I did not have blanks to try it all the way to the end!
I got in touch with people in China from the factory, and being told V48.99 will not work on older Honda models!
They said I will need V46.02 for my cars!
Since You have V46.02, did You program successful any Honda from my Hondas generation!
As far as I know the key chips from that generation are all “Megamos 13l
Thanks for Your Help, and Kind Regards!
All the sbb you buy on eBay or Amazon are cheap Chinese copies it really only do Fords good most other vehicles the program won't say failed to communicate but the genuine SBB or TKO made by Elko will do all the Hondas I recommend buying the X100 pad to this will do what you want to do is a little more expensive thanks Steve
steves locksmith 211 steves locksmith 211 thanks for You quick replay!
:-)
I know it is cheap Chinese copy!
:-)
In the last 20 years or so, I have purchased many cheap Chinese products, and none of them was perfect!
But with some effort on my side, 8 out of 10 did the job and saved to me a lot of expenses!
The good thing is I can return them!
If seller is shipping from US, they take them back and in many cases they even give You a prepaid return label!
In some cases I have payed return shipping to address in US, but I always got my money back!
I think it’s worth the try, and learning something always comes with some cost;-)
I will try and let You know of my experience!
If it doesn’t work, I will return it and get X100!
Are there any cheap fakes of x100 too?
steves locksmith 211 steves locksmith 211
Is that what I’m looking for to do my Hondas?
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F323103523802
I am looking to get this for my 2002 grand cherokee, but don't know if it will support a 99-04 Grand Cherokee. do you know if that is in the Jeep drop down menu?
2002 Grand Cherokee uses a pin code type 2 system in order to program that car you will have to have the four digit PIN code or obtain it from a locksmith that is registered or dealer going to the parts department with your VIN number and tell them you need the PIN code the programmer I would use would be the x100 it runs about $300 it would be able to program that but it will require a PIN code
Will it do a 2008 Mazda cx7
Where do you find a X100 Pad 2?
Thx...very helpful info. Did you return it? I also buy ebay assurance protection on it like 5-10 bucks more in case the seller plays ball?
Can you recommend other tools that will do 'all keys lost' for newer cars ?
Had anyone order SBB pro2 - I just did?
Did you tried SBB pro2 and hows your experience
Interesting...my friend has the ssb33 the compatibility list for Honda civic says up to 2005 I have 2006 would it work would I mess it up if I try. (Do you know why) or can it be software update.
Any information would be appreciated. I am in the UK.
Thanks for your video.
John
Most of the SBB on the market are Chinese copies the original cost around 7 Grand the Chinese copies aren't updatable the only run about $100 most of the software on them do not work the only time I got mine to work correctly was what I used with older Fords the programmer that you could buy that would work good would be the X100 Pad 2 that would have no problem for over in that car have a great day
Can it do 2010 Mazda 3
Thank for the quick reply. Would it mess it up if I try it with ssb 33 what chip is in the Honda civic 2006 you have a great day too
From my experience no it would not mess it up it just wouldn't work it would say failure to connect and just not work if it wasn't going to work
This work for 04 toyota higlander?
Hay Steve does the unit do a 2010 ford transit Australian van?
Hello! Which one do you recommend for Dodge and Chryslers 2005-2009? I have the XPad, but I don’t how to read the pin or sometimes it doesn’t read it. Thank you!!
Older Chrysler's the programmers will not pull the pin code you'll have to get it right from the dealer newer Chrysler's program will pull the pin code the one I prefer is the X100 Pad 2 that's what I try first
May i ask if it will program immobilizer for honda crv 2007? Thank you sir
Looking for a programmer that will program all keys list on Honda’s 03-07. Will this do it?
Only Honda Civic program that will do all Hondas X100 Pad 2 thanks Steve
steves locksmith 211 steves locksmith 211 thanks
@@steveslocksmith211steveslo8 can i do the 05 civic ex new ignition same immobilizer saying csnt find ecu after i put the new key that needs programmed in
unfortunately I found your video too late I also bought A1 and it doesn't do my 2012 Dodge Charger proximity remote so do you think that ck100 will do a Gen 4 proximity key for Dodge Charger
Larry Nance no you want to use the skp 100 this will do your prox remote for the Dodge
Hi Steve, does the 33 version program GM keys? I know you can on-board program GM, but I’m looking for a cheap Chinese machine that can reduce the programming time from 30 min to 12 min. I have the Smartbox, which can do that, but it costs me $10 every time I use it. Can this machine, or any other Chinese machine reduce GM programming time down to 12 min?
Mr. E I haven't done a GM with that programmer in a while but if I remember right I did do a Avalanche round a 2006 with it and it worked it does have a count down. Similar to a Ford I think it's I forgot how many minutes it is a sprite around 10 minutes 5 remember correctly another programmer we might want to look at it would be the CK 100 and the version 46.2 that's a newer version than this and I think it would cover more vehicles for you if you're looking for a cheap programmer so hopefully that helps you
Thankyou for the video.
I keep my 33.xx unid.
Do any of these models allow you to program a transponder without the original key?
Frank Torres all of these programmers program a key without having one that's what they're made to do is for locksmiths when people lose the keys for their car we come out and program a new key so they can go on their way some programmers do some cars good and some programmers do not do some cars good depends on the type of car hopefully this helps you think Steve
Thanks Steve for info. All of the videos i've seen always says input original key, then the key you want to program. I just need one for the Honda Accord 98-02 models. Any suggestion on a machine that works on them pretty good?
hello, is this device working well for European cars?
Will it work for 2001 Nissan Maxima for key programming?
I'm not sure if it will work on that or not it is in the programmer but that doesn't necessarily mean it will work for this is a Chinese clone some stuff in there and does not work if I recall back I think I have programmed a Nissan but this programmer will not convert the PIN code you will have to order a pin code calculator there is an app you can download to do this you'll have to pull the BCM code first and convert that to a pin code before it allow you to program a key a programmer that will work would be the X100 pad2 this programmer is pretty decent programmer and should perform the procedure no problem it also has a built-in pin code calculator so you won't have to play pay for that app hopefully this helps Steve
Everyone asking if it will work for their cars... jeez just buy one and find out like he did lol
will it work on a remote for 2002 Hyundai Santa Fe?
48.8 does reomtes on my 2013 Santat Fe, but wont do the immobilizer.
Hey Steve will this program an 2001 honda civic ex?
Andrew Owen I’ll let you know. I just got mine after 21 days.....gonna see if it works tomorrow. I’m trying with all keys lost and a factory cut key.
Justin Wilson did u try all keys lost?
@@justinwilson4286 hey did this work im trying 05 civic ex new ignition switch same immobilzer keeps saying ecu not found what am i doing wrong
Hello! Will this work on a 2003 Ford Explorer? (v46.2)
Ray Rivers 👍 yes
does it do the 2002 jeep grand Cherokee Laredo?
Anthony Aguilar no you will have to buy an X pro 100 that will do Chryslers just fine thanks Steve
@@steveslocksmith211steveslo8 hi, Steve,
I got Chrysler pt cruiser 2007. Please let me know which unit will be able to read a pin code in order to add a second key for the car?
So the 33 doesn't do dodge??
Can the SBB v33 program keys for a 07 Dodge Nitro of does it give the error of non existing function I'm wondering before I buy one and can't use it
Ryan Guess no you will have to used a x100 pro programer this will pull the pin code and program the key or the ck100 will program the key it will no pull pin code . the sbb will not program any Chrysler cars. Thanks steve
steves locksmith 211 thank you very much Steve I'm trying to avoid getting shafted by the dealer and was looking for a cheaper route
Ryan Guess just go to your local locksmith and have them program your key it should only cost about $45.00 if you go to the and provide the key
steves locksmith 211 Thank you again Steve I will give it a shot and see where I get
Will it work on a 2005 Hyundai Elantra?
I can't recall if I ever program that car with this programmer if you came into my shop I would probably use the xpad 2 100 or skp 100 the only thing this programmer does good is older Fords it may be in the menu but it doesn't mean that it would actually program it good luck thanks steve
I need one that will work on 04 rover
Before I go on a job a check to AutoPro app on my phone and it tells me which programmer works the best for that vehicle it's app is provided by American Key Supply you just have to be registered with them a lot of use the app
Dear Sir, what is the cheapest (chinese?) key programmer I can use to program my ix35/2012 proximity key. Thanks in advance.
The only one I know for sure would be a X100 Pad 2 but the skp900 might also do it but not sure I'll have to look in the menus of my real cheap ones to see if it has it but that doesn't mean it will do it but I'll let you know
Thank you
Even thought I bought SBB the one at the bottom and it’s bad sorry am actually upset about it
But am gonna return it back NOT EVEN WORTH IT
Do you think that work for 2015 f150
Uriel Lopez no this programmer will not work for a 2015 that's a hundred twenty bit chip you will have to use the MVP Pro or a skp-900 to program that key thanks Steve
Will either of these take a car out of lock mode?
mr. fix it I'm not sure what you're talking about lock mode what kind of car and what model are you specifically talking about maybe I can help you thanks Steve
steves locksmith 211 steves locksmith 211 ..... 03 3.5 altima p1610
mr. fix it the programmer that will do what you need is called skp900 that will unlock the car and program the keys hopefully this helps you
I have a Ford Edge 2012 and when I try to program the key it won't let me. It keeps saying "unexisting function" this is a new SBB 48.88 2018
As far as I know the SBB is older technology and will only do Ford's older than 2010 if you'd wanted do newer cars you're going to have to get a tablet base programmer the one I prefer is X100 Pad 2
Hi, this item you have doesn’t represent all v46 trust me you’ve been robbed. The one I purchased doesn’t have a blue screen it has a green screen just like the v33... your tablet has blank software ours has the software. I think you bought a half chip or some alibaba one.
Ebay second, where can I get a v46 version? Who can I buy it from? Is there a way to tell what one I am purchasing?