How to cut and sew trendy shift dress with front slit/opening and a lace yoke design with bias

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024

Комментарии • 49

  • @dibazdibaz6708
    @dibazdibaz6708 9 месяцев назад

    Thanks for this tutorial.Well illustrated…..please,what’s the length of the front slit?

    • @ijaysparksmade
      @ijaysparksmade  9 месяцев назад

      Uwc dear… As long as ur client want…but I used shoulder to 37 inches …cos my client isn’t tall

  • @ezuruikevalentine7913
    @ezuruikevalentine7913 2 месяца назад

    thanks for this..ma pls do u mean if i add 1.5 allow while closing d dress i can sew in by 1nch on both side?
    and if i added 2 inches allow while closing i can sew in by 1inc pm both side?
    pls clarify me i usually find it difficult after cutting such dress and i want to close to give such effect..

    • @ijaysparksmade
      @ijaysparksmade  2 месяца назад +1

      If you put a one inch sewing allowance that is what you will sew with… then you’d add ease (pending on how big you want your kaftan or bubu to be) hope I answered you

    • @ezuruikevalentine7913
      @ezuruikevalentine7913 19 дней назад

      ok thanks ma❤

  • @moyosoreogunjinrin5875
    @moyosoreogunjinrin5875 5 месяцев назад +1

    Welldone ma, but you didnt show us how you do the second slit

    • @ijaysparksmade
      @ijaysparksmade  5 месяцев назад

      Everything is in the video…the second slit was already hemmed in…then this other one was hemmed with the velvet bias to bring out the design

    • @moyosoreogunjinrin5875
      @moyosoreogunjinrin5875 5 месяцев назад

      @@ijaysparksmade Thanks ma

  • @onyiibest2825
    @onyiibest2825 4 месяца назад

    Thank you so much ma, more success

  • @elizabethjoshua6813
    @elizabethjoshua6813 9 месяцев назад

    Nice tutorial. Please what did you take for the front neck and back neck? Thanks!

    • @ijaysparksmade
      @ijaysparksmade  9 месяцев назад

      2.5 by 1 for the back and 2.5 by 4.5 for the front… after turning the neck it will dear at 3inches width ,since I didn’t use a pattern paper to draft it. I hope you understand

  • @SalametuKebiru
    @SalametuKebiru 8 месяцев назад

    Nice tutorial, pls how many inches the you join the pockets with, is there slit at the back? The Front slits is the two hemmed before placing bias on one? Thank you❤

    • @ijaysparksmade
      @ijaysparksmade  8 месяцев назад +2

      I came down from her shd to waistline to place the pocket…it was joined by half inch . No slit at the back …yes the two slits are hemmed before I placed my bias

    • @SalametuKebiru
      @SalametuKebiru 8 месяцев назад

      Thank you

  • @tunmiserosemary3451
    @tunmiserosemary3451 9 месяцев назад

    Thanks for the tutorial. But, am confuse o. You first said u stitched the front slit and you later said u don't want to stich the front and u now used hemming gum to hold it down. Please, can u throw more light in that area (Biko) bcos I want to sew it. I want to know if am to sew it or hemming gum. Thanks for your response.

    • @ijaysparksmade
      @ijaysparksmade  9 месяцев назад

      Uwc you can do the stitching or the hemming both will work just fine… so far it is bent in dear

    • @tunmiserosemary3451
      @tunmiserosemary3451 9 месяцев назад

      @@ijaysparksmade thanks

  • @evelynbriggs164
    @evelynbriggs164 4 месяца назад

    I have sewed my and i put my hemming gum as you just did before sewing on top of the velvet,but it looks as if i added elastic on it,the front is not straight as the velvet is on it,am just confused if i can remove the velvet.

    • @ijaysparksmade
      @ijaysparksmade  4 месяца назад

      Pls ma except your velvet bias squeezed while sewing it… you can try to press and then pin before sewing down

  • @gladmorischannel2634
    @gladmorischannel2634 9 месяцев назад

    Beautiful ❤️

  • @jenniferomorogiuwa2701
    @jenniferomorogiuwa2701 18 дней назад

    Can't I do it full lining

  • @seundami5035
    @seundami5035 3 месяца назад +1

    Please repeat this tutorials you are too fast,how many inches can i add if i want it lose fitted

  • @ajibadefunmifunmi5036
    @ajibadefunmifunmi5036 9 месяцев назад

    More knowledge ❤❤❤❤

  • @KesienaEmmanuel-fp4ru
    @KesienaEmmanuel-fp4ru 2 месяца назад

    How much do use for the up of the sleeves

  • @chinyeregift7549
    @chinyeregift7549 9 месяцев назад

    Beautiful 🥰 thank you

  • @tracynicetv4558
    @tracynicetv4558 6 месяцев назад

    Thanks

  • @user-qn8yi8yj2k
    @user-qn8yi8yj2k 7 месяцев назад

    Is there dart??

  • @ajiboyeboluwatife1466
    @ajiboyeboluwatife1466 9 месяцев назад

  • @elizabethclement5845
    @elizabethclement5845 9 месяцев назад

    Can’t find the tutorial 😢

  • @NgoziOgbooEzeibe
    @NgoziOgbooEzeibe 8 месяцев назад

    You are too fast .
    I can't understand what you are doing

  • @ifeomaconyedaka6253
    @ifeomaconyedaka6253 6 месяцев назад

    You're too fast n your tutorial is difficult to understand thanks❤

  • @DominicMaduko
    @DominicMaduko 3 месяца назад

    U are not telling us everything and you want PPL to subscribe