GGC - 61 - How To Build The Perfect Camper Van Table
HTML-код
- Опубликовано: 23 авг 2016
- We've received a lot of comments regarding the table we built in our camper van. So, we've finally put together a video which explains how it works, and exactly how we built it. If you have any questions, please let us know!
Thee most UNDERsold thing i have ever seen on YT. You Cannot improve that idea, in terms of functions. Soo well thought through. YOU SIR, KICK ASS!
Nice and simple. Great! One possible improvement: a bicycle seat locking device to adjust height.
Yes please do more how to videos on your builds. Also you have a very soothing voice and should be a book narrator.
I've been looking at the lagun table leg for awhile, but really didn't want to spend $200+ on it. Happened upon your video and just finished it up in my van. Love it!
Same!
Genius! I looked for something like that. I will build that table in 2024 ;)
Thank you!
So cool! I'm adapting this to make a bed table for an elderly person. I've been searching for this! Thanks!
100% the solution I've been after for my build, you've no idea how many different ideas I've looked at for this. I owe you man, thanks!!
Good video and project! The parts are easy, the challenge is locating the leg. A lot of videos show the mistakes (and holes) people make while they experiment and try to figure out the location because of how it moves. People have to do this part slowly, figure where they will sit, if it needs to swing in a circle or not, where it rests, what it hits on the way, etc.
In van life everything should have dual purpose and that 26" pipe doubles as van/house defense.
Great vid dude!
I just made this ! It is the project I am most proud of! Thank you so very much for sharing this video and explaining how to make it in terms that everyone can understand
I am so glad you found it helpful. And even more happy to hear that the table worked for you! Thanks for letting us know! :)
I came here from exploring alternatives and I love their build and love yours as well! Thanks for sharing an amazing design with the rest of us 🤗🤗
Enjoyed the video very much. Possibly one of the best DIY vlog on youtube. Well edited and so informative, you got natural talent in front of the camera.
Costs a bit more now for the parts in 2022 ($74) but still way less then a Lagun table. I did end up using 1" pipe as it was the only way to find all parts that would fit together at least at one store. Seems quite sturdy enough but my table top is a little smaller, too. Easy to assemble and works great! Thanks all these years later :)
Great idea and so well explained and demonstrated! I will be using your design in my van in Oz!
I am 72 sold land, pond, house and headaches like weedeating, mowing, taxes, water and electric bills. I purchased a used RV and moved to a park where water..electricity are included in monthly rent!! I live alone and removed the built in dining table bed combo and crappy fold out couch. Took out the built in bed and turned that room into closet-laundry. The only problem "WAS" my dining table. But your video has put the finishing touch I needed to complete my retirement home! I looked at all the options, but if RV, camper are mentioned when shopping the cost is increased. Your design is great and cost effective. The options I looked at for manufactured devices would have needed altering to fit my needs..dining and bed side table combo.. Your video is the best I have seen as I use utube for all my info on the projects or repairs I tackle! THANK YOU... If any one is considering full time RV life at a permanent address, I would do what I can to help.
So elegant in its simplicity and functionality - I love this table! Thank you for sharing.
Love the simplicity and brilliance of the design.
hard to believe you're the only one to do a DIY Lagun table; well done
I made this for my Skoolie thanks to your clear directions!!
So glad I found this video. This is what I have been looking for this for months. Simple & easy to follow for us newbs. LOVE IT!
I was thinking of a way to improve your design. Don't get me wrong, it is amazing, but imagine if you could leave the foot in place.
If you drill a horizontal hole in the bottom of the ABS pipe, about 5 inches from the bottom with a diameter of a pin/screw.
This way, if you pull the pin out, the leg would drop lower than the bed height and can stay in place. Lift it up, insert the pin and you can use it as you currently do.
Thanks for this comment. I was trying to figure out how not to allow mine to swivel while I’m traveling or just not wanting it to move. I will just insert a hole through all of it and put like a cotter pin.
Yes please do the van build video. I really love all your videos and I'm excited about the new adventures with your homestead too!
Very clever design and thoughtful execution. In the end, simple perfection.
I think that a huge benefit is that you can leave it installed by rotating it over the seat at night and the bed during the day.
Love it! How simple and creative. Thank you for explaining all parts, sizes and assembly instructions. I always love campervan modification ideas, keep'em coming.
Awesome idea! Sorry for the 25 haters. But still many Likes. Thanks for sharing.
Built and installed today. My wife and I love it. Great design, simple and strong. Thanks a bunch.
Genius. Absolutely the best reproduction of the old Westy pivoting table that I have ever seen.
This is so perfect. I will be building this weekend. Thank you for the careful and detailed direction. You just made my van life a whole lot better. Blessings!!
your table is brilliant, prefectly explained. I did miss the lovely Miss Paula.
The best solution to the wobbly pedestal leg that comes in many campers, like my truck camper. Pure genius! Thanks for sharing.
Not only was the design genius, but the video was as well! 🙏
Absolutely brilliant...simple to build, excellent use of space. Very cleverly designed. Thanks a million. I'm remodeling a 1999 Rialta and I have a spot where that will work perfectly.
Thanks for the very clear, simple, and straightforward explanation of how you both used and built this table. Thanks for sharing the knowledge!
Thank you for, getting to the point of the video, not having loud time wasting intro, explaining the problem and the thought process to get where you got to and a very affordable solution. And yea, good speaking voice.
Would love to see the rebuild of the van. Have followed your journey and hope you continue to do some travel again. The new property especially the garden method was great. Told a friend who is starting a new garden on very soil about your garden. Again thanks.
Thanks, that was enormously helpful! I really enjoy these how-to videos, especially since you take the effort to explain each step and piece so carefully, so I hope you make more them.
Efficient and well edited piece of video. Pretty sure you've solved one of the major problems of my planned build. Many thanks!
FINALLY!!! A perfect and easy, cheap solution to my head scratching over making my table. Thanks so much for posting 🤗👍🤩
Love it! I'm in the process of converting a school bus and used your design to build two tables. Thank you so much!
Was so happy to find this video. I did this using your youtube video. I took the old table out from my bench seat area which had legs that were a trip hazard, but didn't want to lose the bed platform. So, I made a table top with the pipe function you showed to be my rotating table and then cut another piece to fill in the back side that could be used to make it more of a booth concept (sitting in back and on sides). This back piece also can serve as a place to put like your phone or purse or something if there are only 1-2 people in the camper. The rotating table top can be unscrewed from the pipe and then I can completely remove the pipe and put it under the seat. The table top then slides onto the two supports on the bench seats and then the extra cushion along with a cushion made for the back piece are put in place to still make a bed. Genius. Thanks for sharing your build. In addition, I added a hole all the way through my pipe and the PVC holder at the bottom of the pipe so I could put a cotter type pin through it to stop it from rotating while travelling on road.
best explanation ever! 👏🏻😄thank you so much ! 🙌🏻
Thanks so much for sharing this! We've been looking for alternatives to the Lagun mount and this looks like a great solution!
Perfect! Was looking for a inexpensive version of a Lagun Table to store behind the driver seat and you nailed it! Thank you!
Love it.. Thank You for sharing..
So far, this seems like the best, diverse option.
Perfect idea! I will use this in my build as the table was the last piece i couldn't figure out where to place. I wish the UK DIY stores had such a service a we see in this video. Thanks muchly and enjoy your van guys :-)
I am going to use your
Very clear table to make one for my tiny home.
Thank you so much.
Grtz from holland
Derrick, thank you so much for this very clear tutorial. Love this table and hope to put something similar in my minivan.
excellent, Elegant Solution to a Tricky Challenge. Bloody Well Done Mate.😃
I am very glad I found you and your advice. This is perfect for what I need. Perfect in its simplicity. Again, I'm so glad I found your video. Thank you
Hi again. Ray here. I have finally finished my swing-out table. It works perfectly. The difference with mine is that it is in my little trailer. I had very little room to maneuver. Perhaps less than you have in the van. I had to put it further out as our bed is a Queen size convertible to a smaller bed with seats on each side. The only problem I had is that I had to use PVC for the upright, and I couldn't find screws that fit properly. I had to use #14 X 1" and grind the tip off so it wouldn't go through the formica table top. #16 X 3/4" screws would be perfect. But after all that I have finally finished. I love it. Thank you so much for sharing this for us.
Supremely well done! I really enjoyed your video. I can't get enough of your camper van videos. Merry Christmas and be blessed, Michael
Thank you a MILLION.. I am very limited in space since I am running a expediter van. I really wanted a table but all I could find were drop down leafs. This is PERFECT as I truly wanted a table for the bed and for the kitchen. I can't wait to make it.
Absolutely brilliant idea and such a well explained video. I read the title and thought you were probably overselling this idea. How wrong was I? I'm so glad I found your video. I'm aware you posted this 4 years ago, so please accept my apologies for such a late comment, but only now contemplating a van conversion in the UK. You have helped me realise the table is now going to be so easy to install. Thanks again! 👍🏻
Brilliant! So much more economical than the commercial alternative. Thanks for sharing!
Absolutely awesome table. Many thanks for sharing this.
2020 and you’re still helping people! Thank you 😊
2021 here! Thank you!
You are amazing and you have saved me over $300. I was looking at a Lagun table system but now I know that I can do it myself. Thank you.
Following your direction gave us an amazing table. Thanks so much for making this video!!
I've been looking for "swiveling table legs" forever and you just saved me hundreds of dollars with your design! Thank you!! Simple design, great video, easy to follow... I'm off to home depot!
That's wonderful. Let us know how it works for you. :)
Truly excellent video! That is the table fitting that I was looking for, very pleased to find this DIY video, many thanks! I need this in my RV.
Perfect functionality. I have been looking for this for months!
I love your idea! so handy and yet so simple to build!
I am modifying my Class B to have a similar type bed to replace the rear sofa. I haven't used the table that came with the RV since I bought it. (5 years) It was too big, heavy and cumbersome. This will fit the bill perfectly for me and my needs. Thanks for sharing.
AWSOME! Thanks for sharing. God Bless America and your family! Love Uncle Jeff!
Really like the table design. Pretty ingenious. I think I will use the idea in my van but modified to suit my purposes. Thanks for the video.
Great video and would love to see more of your designs explained! Thanks for sharing!
You have made me very, very happy. Thank you!!!!
Pure gold. A fantastic idea. Thanks mate.
Thank you for sharing. Very ingenuous. Looking forward to more videos.
Hey Derrick, just sorted a converted peugeot boxer, and desperately needed a solution for the desk. You're a wizard, thanks for this demonstration!
Love this video. Converting a Sprinter van shortly and I love this table idea
Thank you so much for sharing this table assembly. Best wishes and blessings in all you do!
Perfect plan for a table. Thank You!
That's a great table,functional and easy to make,now I wished I had a van to build one for😁
Love the way you explained it very thoroughly. Thank you!
We really enjoyed this video thank you so Much it has given us alot of idea's on how to build the camper table the right way and store it
Fantastic! Thanks so much. Great idea. We plan to use it in our conversion trailer.
Thank you so much for sharing this design and the wonderful instructions! Looks sturdier than a $250 ‘Lagan ’ table leg!
Simply beautiful. Thanks kindly
Great table and VERY helpful video, thanks!
Excellent design! Even the tabletop is easily made with some plywood and Formica if you don't have one to re-purpose. I'm a fan of plywood and Formica for countertops and tables in RVs. Light, durable, and easy to work with.
One of the best instructional videos I have seen.
Thank You for posting this! Great idea.
Looking forward to more videos. Hope you are enjoying the cabin!
Thanks Marla! We are, for sure! :)
Totally awesome design. Many thanks
Absolutely brilliant! Thanks for sharing this idea 👍
Fabulous! Very ingenious! Will do this. Thanks.
Great work on making a functional table and save space. Please post more.
Thank you! Awesome video and idea. We’re going to build this into our van.
Great video! I'm in the UK and I need a swing out table I can fix to the B pillar behind the front passenger seat. I could buy one, with the 'cranked' leg, but they're very expensive, so now I know how to make my own! Thank you for passing on your idea's and expertise. Oh and I'm loving the Hugelkultur video's. Another inspiration for me :) Peace. Much love to you both. :)
Great video. I followed your instructions and built the same table with no problems. Love it. Keep posting please.
Awesome! I'm really glad it worked for you!
Great design! We are seriously considering this for our van. Thanks for sharing!
This is amazing. Thank you so much! I can't wait to make something extremely similar in our ambulance conversion.
One of the very best diy videos I've seen on RUclips !
Great idea! Simple yet functional
That's such a cool table. Im going to build one for my astro van conversion. thanks for the advice!
This is such a helpful tutorial. Thank you!
So glad I saw your video. I was about to try to make something similar with conduit. Thanks for sharing!!! This is perfect
Awesome. Exactly what I was looking for. Thanks so much!
Wow. Excellent. Very well presented and thought out.