Great Vidéo - Now I know how to do. But I still don't know what type of oil I need : 5W-30W or 5W-40W for my FORD Transit 260-85 of 2006 Diesel (gasoil) thanks a lot 💖🤗
I've changed my filter numerous times and it leaks. Nothing I can do will stop it. Also put a new sump plug and seal on and that leaks. Any suggestions? (both torqued up correctly)
hello, i have a question: problem on my ford transit 2005 (85t260). I have a coolant leak from the "oil cooler". I have the spare part, the question being: do I have to change the oil? or can I replace the part first and then replace the oil later?
@@HaynesManuals Thanks you there is an oil cooler leak (hole / crack) near the bottom screw. I wanted to replace the part to be able to move to a friend who has a pit and finally change the oil. Do you think this is possible?
![How to change the engine radiator on the FORD TRANSIT MK7 [AUTODOC TUTORIAL]](http://i.ytimg.com/vi/FNxnPmQfwrI/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Great Vidéo - Now I know how to do. But I still don't know what type of oil I need : 5W-30W or 5W-40W for my FORD Transit 260-85 of 2006 Diesel (gasoil)
thanks a lot 💖🤗
OK found the type of oil in the comments 5W - 30W synthetic
Thankyou Haynes
You're welcome!
What size socket do you need to remove the oil filter case?
I need to know this as well
36mm
36 mm is correct, the drainplug is 13 mm
@@Max-bm5xj is the washer also 13mm?
I've changed my filter numerous times and it leaks. Nothing I can do will stop it. Also put a new sump plug and seal on and that leaks. Any suggestions? (both torqued up correctly)
Is there a trick to get the filter out of the housing, I used a lot of effort pulling it out and broke the spring and plastic thing in the middle ?
True. Just looking for some tips cause that's the only tricky part of the whole operation and not a word about it
hello, i have a question: problem on my ford transit 2005 (85t260).
I have a coolant leak from the "oil cooler". I have the spare part, the question being: do I have to change the oil? or can I replace the part first and then replace the oil later?
If there's a possibility that coolant has mixed with the engine oil, changing the oil is essential.
@@HaynesManuals Thanks you
there is an oil cooler leak (hole / crack) near the bottom screw.
I wanted to replace the part to be able to move to a friend who has a pit and finally change the oil.
Do you think this is possible?
It depends on how much coolant is in the engine oil. Pull out the dipstick and check - any coolant should be floating on top of the oil.
can i use aluminium washers as crush washers?
Yes, as long as they don't leak
which type of engine oil is best ?
5 w 30 preconised
5 /30 fully synthetic
would be nice if you add the the tools need such as size ... otherwise great apresentation.
If this is for non experts I would expect suggestion- do changing of oil with warm / hot engine (don't do it with cold engine)
Good point - the full procedure is given in our manuals.
I agree the oil drains better when the engine is warmed up