Geberit CleanLine60 shower channel - Installation
HTML-код
- Опубликовано: 20 апр 2015
- Geberit CleanLine60 shower channel Installation
Geberit CleanLine60 Duschrinne
ID: 2048466
Please note: Videos do not replace installation manuals. For installation purposes, please use the respective Geberit installation manuals.
Imprint: www.geberit.com/en/meta/impres...
Disclaimer: www.geberit.com/en/meta/discla... 
Наука
Piece of cake. I will try this tomorrow
Eure duschrinnen sind wirklich das beste am Markt.
Nur mir hat noch keiner den eigentlichen Unterschied erklären können zwischen der Cleanline 20 und 60. ???? Der Preisunterschied allein wirds wohl nicht sein
Lg Danke
Bei den CleanLine Varianten unterscheiden sich die Profile sowie damit auch die Masse. Schau mal hier die Produktdaten der CleanLine20 catalog.geberit.de/de-DE/Geberit-Duschrinne-CleanLine20/PRO_170946.html Und hier die für die CleanLine60 catalog.geberit.de/de-DE/Geberit-Duschrinne-CleanLine60/PRO_170947.html
@@GeberitGroup
Danke das habe ich schon gesehen! Eigentlich ist nur das Profil anders denn laut euren Datenblätter is der Rest komplett identisch... 🤔🤔
Heftig der Preisunterschied für ein anderes Profil
Die Profile sind komplexer in der Herstellung und das macht sich dann auch im Preis bemerkbar.
What cement or adhesive do I need to stick the strip to the trap?
Sure tile adhesive won’t stick.
In the installation set for Geberit shower channels (e.g. article no. 154.150.00.1) is everything you need to properly install Geberit CleanLine (article no. 154.450.00.1 für Geberit shower channel CleanLine20)
Is it possible to turn Base unit for Geberit trap on 90 degrees, i.e. along the wall, in order to get output parallel to a wall?
The base unit can be positioned freely. Of course if the waste pipe is properly installed and makes it possible.
Hi
Pls if i need to turn the base unit to the wall 90 degrees so the bass unit and the top metal grill will be parallel to the wall
Is that possible? And if so how much the gap between the wall (pre tiling) and the base should be if i need the top grill to be flushed to wall. Same as in ur video but all i need is the base to be parallel and flush with wall.
Thanks
Yes you can rotate the base Siphon assembly so that it is parallel to the wall in its side length. The new distance from the wall to the drainage hole in the Siphon assembly/Cleanline shower channel however grows larger with 7cm needed.
Nice one
is it possible to use drain on a glued down lino type material thx
If you have a special situation, it might be better to contact the local Geberit service team.
Is there an option for use on a wooden floor thanks
If you want to, yes.
Can you provide part numbers thanks
How to unclog a Geberit bathroom drain?
The water is going down very slowly and I looked there is no hair at all but the water is not going down
I really appreciate if help with some good advice.
Thanks!
Remove the shower head from the shower hose. Seal the siphon opening and around the hose with a cloth. (Caution: using high pressure can damage the siphon and connection pipe) if this doesn't help you can also use a plunger. For this you need to seal the siphon opening with a cloth.
@@GeberitGroup
Thanks I really appreciate. I will try it . Blessings
My question is about The water is going down very slowly from the bathroom floor drain. How to unclog the bathroom drain?
Please try a plunger or ask a plumber to check the pipes.@@blissful.1153
So 80% is just for looks ? Water flows over it
The shower channel leads the water towards the outlet. Correct.