Salamat po sa tutorial dahil dito gusto ko ng mag diy sa printer, di na kasi nag feed ng maayos, skipping ang ginagawa nya, pag may lumabas na walang, next naman may print, tas wala uli 😅
Hi po. Maraming salamat po sa panonood ng video na ito. Regarding po sa tanong ninyo, depende po. Kapag kalahati lang ang napapasok at kusang tumitigil ang printer at may error message tulad ng communication error, check niyo po ang connection ng printer sa PC ninyo po. Kapag biglang tumitigil ang printer at iniluluwa lang ang papel sa kalagitnaan, maaaring kailangan pong i reinstall ang driver ng printer. Pero kapag nag eerorr ang printer, posible pong amy problema mga gears niya sa loob.
bakit naman binuksan mo wala naman sira, bagong bago pa nga, pero tenks pa rin kase may natutunan ako, pwede pala ayusin printer kahit walang sira. fish tayo bro'
Thankyou, great video !, Now i have some problems with my L3110, its pulling multiple paper when printing, i already replace both upper and lower feeder, do you have any ideas bro?. Thankyou for helping, have a nice day..
If it is possible to change just the rubbers first, it will be economical. However, if the rubbers are okay, it will be better to replace the rollers instead
Thanks for reaching us. Before we'll give suggestions, we need to know the pattern of blinking lights as they come in different forms. It could be that the printer needs resetting or mechanical issues inside the printer exist.
Sir good morning I have epson l4160 I already change one set of feeder, no problem in test print like Excell and word. but the error remain specially when I print a picture. What will the solution? Thank you
Hi there and thanks for reaching my channel. Regarding your concern about the print output, we need to check if it is a hardware-related issue or a software-related issue. Try to do a Nozzle print check and see if the print quality is satisfactory, that is, all nozzles work. If it is, then it is a software related-issue which could be a printer driver software configuration.
When we consider hardware-related issue, we refer to the printer itself which may have issues in its printhead as some nozzles (the parts that spray the ink out) may have been clogged which affect the picture print quality. In addition, mechanical issues in the printer may exist sir @@ricogenese2440 .
Hi sir. Good day!. Thanks for reaching my channel po. Heto po ang link ng binilhan ko sa shopee: shopee.ph/product/344750542/7270322528?smtt=0.62811351-1623300899.9&fbclid=IwAR05KAwtwy5dBOCDUIOF4a-dQd06zKIoWDvUUCWseMuLhODaR-RKbh_Dhjc
hi po mag iiba po ba feeder nya pag halimbawa po aksidente pong naka pag xerox ako ng 200gsm na photo paper? may time po kasing hindi nya kinakain ung bond paper pag nag xexerox ako.salamat po.more power
Hi po. Posible pong macondition ang feeder sa mas makapal na papel. Ang pwedeng gawin po ay i check ang feeder roller at tanggalin at ibalik muli para maireset mechanically.
Sir morning good ang issue po ng printer namin need mo pang itulak si bond paper pra mag print ano po kaya issue nito sir any suggestion sir tnx and god bless
Good day sir, ano po kaya problema ng printer kinain po naman ung papel pero nastuck sa loob at tuloy parin ung pagpriprint kahit walang papel na napriprintan tsyaka wala naman signal na paper jam
Good day. May possibility yan na mayroong foreign object sa loob na naging dahilan ng pagka stuck ng papel. Hindi lumabas ang paper jam error pagkat hindi pa na detect ng sensor sa pagkakataong yan. Kapag normal pa rin na walang na dedetect na paper jam matapos may na stuck na papel, posibleng hindi gumana ng maayos ang sensor.
Normal po yun kasi may lock guide jan na bumibilang ng isang rotation cycle sa pag feed ng papel sa printer. Gaganap yan sa unang pagkagat ng roller sa papel at matapos mainitiate ang paper feed, hihintay na naman ng susunod na sheet ng papel.
Sir. ung printer ko Epson L3110. Ok pag A4 pero hindi na nakakprint ng fast quality at legal size na paper after palitan ang roller, niluluwa nalang. Sabi ng printer, incorrect paper loading kahit ok naman. Bakit po kaya
Subukan pong i set nang tama ang paper size. If hindi pa rin po maresolve, huwag na lang gumamit ng fast (draft) quality kasi hindi po ito advisable sa maramihang volumes ng piniprint (modules).
@@TiyoTurko Nasa legal naman po size kaso parang nrereject nya lang. Pag A4 nakaset ok naman po at smooth ang feeding. Parang magic nga eh. any idea po bakit kaya gnun?
hello sir! kapag p ba palaging nagpprint ng 220gsm (calling card paper) sa epson l3110, possible po ba na masira yung pinaka feeder nya? ayaw na po kasing kainin yung 220gsm. thank you!
Possible pong mag iba ang takbo nga feeder rollers kung kaya mangyaring hindi na siya mag fe-feed ng mas makapal o mas manipis na papel. Yan po ay base sa experience q sa printer.
Hindi naman po sa ganun na bawal po sir. Sa experience q po, kapag madalas na ginagamitan ng makapal na papel, nagkaka error siya kapag gagamitan ng manipis na papel.
Hello sir anu po laya problem ng printer q pinalitan q n ng rubber ung roller feeder nya pero pag nagprint my dumudulas n papel...magprint xa tapos may lalabas n blank paper tas print ulit
Hi po. Thanks po sa pagtatanong. May posibilidad po na mayroon talagang blank page sa piniprint o d kaya'y nag aadjust pa ang bagong set ng rubber sa rollers. Isa pa pong possibility ay sa quality ng papel.
Hi there, I was hoping you can help me I have a L3111 and the paper does feed and printhead moves towards the paper but then a paper jam error will occur. Then off the printer and on and then it will feed two papers so that's how know it's not the paper feed. Please assist me if you can. Thanks
Hi there. Thanks for reaching out. I believe that the paper feed sensor's mechanical spring has been either lost or dislocated. At 2:09 of the video ruclips.net/video/tX59YyKT6fA/видео.html is the sensor that I mean and there is a small spring that holds the lever that reaches the sensor itself.
ruclips.net/video/5Jz2-zkZluA/видео.html Watch this video po sa channel q parin at 13:00 nandyan po ang fix. Pero irerecommend ko pong panoorin ninyo ang buong video upang mas maintindihan ang dahilan ng pagkasira nga feeder roller.
Sir Thank you very much po laking tulong po ng video nyo, hope na magpatuloy po yung pag tulong nyo at pag upload ng video para sa mga need na matutu at lalo na ngayong pandemic mahirap po maglalabas ng house work at home talaga..i'll try it tomorrow po tapos i will update my comment once na nagawa ko po yung tutorial nyo more power po and God bless...
@@argelvallecer3663 sure po sir. If yung tinutukoy niyong spring ay magkapareho ang laki, around 1 cm yung diameter at 3 to 5 cm ang taas, malamang springs po ito ng paper tray. Meron pong dalawang guides jan kung saan sila nakalagay.
Salamat po sa tutorial dahil dito gusto ko ng mag diy sa printer, di na kasi nag feed ng maayos, skipping ang ginagawa nya, pag may lumabas na walang, next naman may print, tas wala uli 😅
Very crystal clear explanation brother. Thanks a lot
Thank you very much
Awesome video.Just perfect for what I was looking forward to understand
Thanks
thank po sa tutorial. ask kulang po if ano problem kapagkalahati lang bond paper ang nakakapasok and di na po nacocontinue ang pagprint
Hi po. Maraming salamat po sa panonood ng video na ito. Regarding po sa tanong ninyo, depende po. Kapag kalahati lang ang napapasok at kusang tumitigil ang printer at may error message tulad ng communication error, check niyo po ang connection ng printer sa PC ninyo po. Kapag biglang tumitigil ang printer at iniluluwa lang ang papel sa kalagitnaan, maaaring kailangan pong i reinstall ang driver ng printer. Pero kapag nag eerorr ang printer, posible pong amy problema mga gears niya sa loob.
thank you sa info bro more power sa sau at sa channel mo
Maraming salamat din po. God bless po!
Ilongo blogger ok support ko simo
Madamo gid nga salamat sa suporta. Ilonggo gid ta!
Great video thanks!!! small suggestion: don't use background music so we can hear you better. Thanks a lot!
Thank you so much☺️
This is very helpful. You nailed it!
Thanks... Hehe
bakit naman binuksan mo wala naman sira, bagong bago pa nga, pero tenks pa rin kase may natutunan ako, pwede pala ayusin printer kahit walang sira. fish tayo bro'
Thank you so much its work
You're Welcome 😉
Thankyou, great video !, Now i have some problems with my L3110, its pulling multiple paper when printing, i already replace both upper and lower feeder, do you have any ideas bro?. Thankyou for helping, have a nice day..
Good morning po! L3110 po. Minsan ngpprint sya minsan ayaw tumuloy ng papel minsan naman po tumtuloy ung papel pero walang printed. Thank you!
I have mine with complete springs as I checked yet still have feeding problem. Do you suggest replacing the pick up rollers? Thanks!
If it is possible to change just the rubbers first, it will be economical. However, if the rubbers are okay, it will be better to replace the rollers instead
Sending my support sir...
Maraming salamat idol!😊
Sir good pm. paano naman po kapag nag piprint naman po sha pero maraming papel ang kinakain nya minsan? sana po masagot. salamat
Hi po. Pwd niyo pong ma check yung lower feeder lower baka nasira na yung spring. ruclips.net/video/5Jz2-zkZluA/видео.html
my printer are cry like a seety and start double lighting .what i do
Thanks for reaching us. Before we'll give suggestions, we need to know the pattern of blinking lights as they come in different forms. It could be that the printer needs resetting or mechanical issues inside the printer exist.
Sir pano nmn qng bago na lahat rubber up and down at ung gear ayw pa din kumaen ng papel . nalinis qna din lahat baklas lahat pero ayw pa din kumaen.
Sir good morning I have epson l4160 I already change one set of feeder, no problem in test print like Excell and word. but the error remain specially when I print a picture. What will the solution? Thank you
Hi there and thanks for reaching my channel. Regarding your concern about the print output, we need to check if it is a hardware-related issue or a software-related issue. Try to do a Nozzle print check and see if the print quality is satisfactory, that is, all nozzles work. If it is, then it is a software related-issue which could be a printer driver software configuration.
Any idea hardware?
When we consider hardware-related issue, we refer to the printer itself which may have issues in its printhead as some nozzles (the parts that spray the ink out) may have been clogged which affect the picture print quality. In addition, mechanical issues in the printer may exist sir @@ricogenese2440 .
Thank you
You're very much welcome sir@@ricogenese2440 😊😊😊
Good Morning po, pwede po bang rubber lang yung palitan? Thanks po
Yes Good Morning po. Pwedeng pwede po as long as ok pa namn ang ngipin ng gears nung plastic part pickup roller po.
link sir kung saan mo nabili yung mga parts na yan.. thanks po..
Hi sir. Good day!. Thanks for reaching my channel po. Heto po ang link ng binilhan ko sa shopee:
shopee.ph/product/344750542/7270322528?smtt=0.62811351-1623300899.9&fbclid=IwAR05KAwtwy5dBOCDUIOF4a-dQd06zKIoWDvUUCWseMuLhODaR-RKbh_Dhjc
hi po mag iiba po ba feeder nya pag halimbawa po aksidente pong naka pag xerox ako ng 200gsm na photo paper?
may time po kasing hindi nya kinakain ung bond paper pag nag xexerox ako.salamat po.more power
Hi po. Posible pong macondition ang feeder sa mas makapal na papel. Ang pwedeng gawin po ay i check ang feeder roller at tanggalin at ibalik muli para maireset mechanically.
Sir morning good ang issue po ng printer namin need mo pang itulak si bond paper pra mag print ano po kaya issue nito sir any suggestion sir tnx and god bless
Thanks for reaching out po. Possible cause po niyan ay feeder roller rubber po malamang ay manipis na.
ruclips.net/video/5Jz2-zkZluA/видео.html
Ano po prob pag nagfeed naman siya tapos pag tuloy tuloy biglang di po sya magffeed bigla? Salamat po
hi po. possible po na kailangan i replace ang rubber. try to chek po muna if shiny or hindi na maka grip yung roller rubber.😊
@@TiyoTurko saan rubber po? Salamat po
Yung nasa pickup at feeder roller po
sir @@EmerickPangilinan
Good day sir, ano po kaya problema ng printer kinain po naman ung papel pero nastuck sa loob at tuloy parin ung pagpriprint kahit walang papel na napriprintan tsyaka wala naman signal na paper jam
Good day. May possibility yan na mayroong foreign object sa loob na naging dahilan ng pagka stuck ng papel. Hindi lumabas ang paper jam error pagkat hindi pa na detect ng sensor sa pagkakataong yan. Kapag normal pa rin na walang na dedetect na paper jam matapos may na stuck na papel, posibleng hindi gumana ng maayos ang sensor.
Sir Tiyo bakit pag iniikot ko ung ganyan ko 10:41 bakit tumitigil sya na parang may pumipigil tapos iikutin ko naman sya pabaliktad normal po ba yun?
Normal po yun kasi may lock guide jan na bumibilang ng isang rotation cycle sa pag feed ng papel sa printer. Gaganap yan sa unang pagkagat ng roller sa papel at matapos mainitiate ang paper feed, hihintay na naman ng susunod na sheet ng papel.
Sir. ung printer ko Epson L3110. Ok pag A4 pero hindi na nakakprint ng fast quality at legal size na paper after palitan ang roller, niluluwa nalang. Sabi ng printer, incorrect paper loading kahit ok naman. Bakit po kaya
Subukan pong i set nang tama ang paper size. If hindi pa rin po maresolve, huwag na lang gumamit ng fast (draft) quality kasi hindi po ito advisable sa maramihang volumes ng piniprint (modules).
@@TiyoTurko Nasa legal naman po size kaso parang nrereject nya lang. Pag A4 nakaset ok naman po at smooth ang feeding. Parang magic nga eh. any idea po bakit kaya gnun?
@@TiyoTurko Di kaya mas makapal yung pinalit ko na rubber s stock eh
hello sir! kapag p ba palaging nagpprint ng 220gsm (calling card paper) sa epson l3110, possible po ba na masira yung pinaka feeder nya? ayaw na po kasing kainin yung 220gsm. thank you!
Possible pong mag iba ang takbo nga feeder rollers kung kaya mangyaring hindi na siya mag fe-feed ng mas makapal o mas manipis na papel. Yan po ay base sa experience q sa printer.
@@TiyoTurko bawal pala mag print ng makapal sa L3110? ano reco gsm na sakto sa kanya na hindi magbabago takbo?
Hindi naman po sa ganun na bawal po sir. Sa experience q po, kapag madalas na ginagamitan ng makapal na papel, nagkaka error siya kapag gagamitan ng manipis na papel.
Hello sir anu po laya problem ng printer q pinalitan q n ng rubber ung roller feeder nya pero pag nagprint my dumudulas n papel...magprint xa tapos may lalabas n blank paper tas print ulit
Hi po. Thanks po sa pagtatanong. May posibilidad po na mayroon talagang blank page sa piniprint o d kaya'y nag aadjust pa ang bagong set ng rubber sa rollers. Isa pa pong possibility ay sa quality ng papel.
@@TiyoTurko thank you po
Hi there, I was hoping you can help me I have a L3111 and the paper does feed and printhead moves towards the paper but then a paper jam error will occur. Then off the printer and on and then it will feed two papers so that's how know it's not the paper feed. Please assist me if you can. Thanks
Hi there. Thanks for reaching out. I believe that the paper feed sensor's mechanical spring has been either lost or dislocated. At 2:09 of the video ruclips.net/video/tX59YyKT6fA/видео.html is the sensor that I mean and there is a small spring that holds the lever that reaches the sensor itself.
sir paano po kapag maraming paper yung kinakain nya pag nag print ako minsan 2 to 3 paper sabay pumapasok ano po kaya problem pag ganun ??
Maraming salamat po sa pagtatanong. Kapag ganyan po ang isyu ng printer na kumakain ng higit sa isang papel, sira po ang spring ng feeder roller niya.
ruclips.net/video/5Jz2-zkZluA/видео.html
Watch this video po sa channel q parin at 13:00 nandyan po ang fix. Pero irerecommend ko pong panoorin ninyo ang buong video upang mas maintindihan ang dahilan ng pagkasira nga feeder roller.
Sir Thank you very much po laking tulong po ng video nyo, hope na magpatuloy po yung pag tulong nyo at pag upload ng video para sa mga need na matutu at lalo na ngayong pandemic mahirap po maglalabas ng house work at home talaga..i'll try it tomorrow po tapos i will update my comment once na nagawa ko po yung tutorial nyo more power po and God bless...
Maraming salamat din po@@fernanplacio9644 sa inspirational na message ninyo. Dadagdagan pa po natin mga tutorials sa channel dito. God bless po ..
Sir good afternoon bakit stuck yung Gear? Pwede ba kita ma message sa fb?
Sure po. facebook.com/ElBuccoLect
@@TiyoTurko nag PM ko. Sa imo Sir ❤
@@anonimos7351 ok po
good pm po sir
may na tanggal po na dalawang spring na malaki sa epson l3110 pag open ko po , nalito ako saan ito ibabalik
please help me po sir
may close up picture po kayo sir kung saan pwede ilagay yung dalawang malaking spring po
@@argelvallecer3663 sir Hello po. Pwd po tayong mag chat.
facebook.com/ElBuccoLect
@@argelvallecer3663 sure po sir. If yung tinutukoy niyong spring ay magkapareho ang laki, around 1 cm yung diameter at 3 to 5 cm ang taas, malamang springs po ito ng paper tray. Meron pong dalawang guides jan kung saan sila nakalagay.
10q
WelCome po