Looks good brother, but the first thing I notice is the right rear of the bag is off a tiny bit. But man you got me lovin that great paint. I wasn't so sure about the green when it came out. But that looks so good!
I'm considering going with the dominator rear fender, and like you I have Harley stretched bags (which are not as low as the Advan Black bags). I'm worried about the center of the dominator being lower than the bags. Are you running stock Harley stretched bags, and if so can you show kind of a side profile of the fender with them? I really dig how the license plate integrates into the dominator, and would like to go that route if it looks "right". Thanks man, and appreciate your channel.
Hopefully the paint holds up I have advanblack saddle bags on my street glide for a year and they are chipped paint or clear thickness not very durable. You spend a grand on saddle bags you would think the paint would last.
What muffler are you rocking? Looks like Tabs. Is it 50 cals or 4.5 bam sticks? I have 50 cals and REALLY WANT the dominator fender but am worried about fitment.
@@officialmac you selling it? I bent my rim from a pothole, i’m covered through harley’s warranty but Harley doesn’t have any wheels in stock until February… been without my bike for two months now. It’s ridiculous.
No hate no disrespect. I'm just a fan of the stock look. Bike looks wonderful. Extended bags i love. Stretched fenders and bags just not my style. Beautiful bike bruh.
I purchased and installed a Dominator Fender on my 19 Road Glide Special. First thing to know is the fender is plastic not metal. I had mine on the bike for about 9 months when the seat nut pulled completely out of the plastic. I spoke with AdvanBlack about it and found out the warranty is only 6 months, after several emails back and forth they offered to replace it but only if I paid $300.00 in shipping cost which ai would not do so my Dominator is in the trash and I am out $800.00. Bottom line is this stuff is made in China buy at your own risk.
Well that sucks... what was the cause of the seat nut pulling through? Did you have a screw holding it or no washer I just need to know for my own good the ppl watching
@@officialmac I have a Saddlemen Road Sofa seat and used a Saddlemen seat bolt, thumb screw type. They basically molded the nut into the plastic, there is no support for it at all just the nut. They need a steel backing plate on it or something to add more strength to it.
I have the same setup in black love it !
Very nice! Great video👍🏻
That looks hella good brotha! How was the install? I love the Cadillac lights always wanted them on my ride also 🤙🏾
Harley Davidson makes a antenna that goes under the fairing if you still want to use your radio every now and again.
Looks good brother, but the first thing I notice is the right rear of the bag is off a tiny bit. But man you got me lovin that great paint. I wasn't so sure about the green when it came out. But that looks so good!
Bike is looking good Bro! Rear tail lights.😎
Been thinking about getting that CVO style fender in vivid black. Your bike looks great. I personally couldn’t do the opening on the left side 😎
I said the same thing. The open hole doesn't flow well. Otherwise the bike looks great.
Nice upgrade, it’s mandatory as far as I’m concerned! Must have
Sorry I spilled it bro🥴🤣…great video as always
All good
Haha everything comes full circle. I remember when you first got the bike you was skeptical about the color match advanblack. Bike looking great
Stay tuned!
Nice 👍
Officially the Mac would love to have air cleaner like yours
You can put your antenna in your fairing
💯💯💯
I have that same fender on my bike…I changed the lights to custom dynamics though
how?
I'm considering going with the dominator rear fender, and like you I have Harley stretched bags (which are not as low as the Advan Black bags). I'm worried about the center of the dominator being lower than the bags. Are you running stock Harley stretched bags, and if so can you show kind of a side profile of the fender with them? I really dig how the license plate integrates into the dominator, and would like to go that route if it looks "right". Thanks man, and appreciate your channel.
Stock harley stretched bag and it hangs a little lower
👍👍👍👍
aye man can you drop your music playlist
Hopefully the paint holds up I have advanblack saddle bags on my street glide for a year and they are chipped paint or clear thickness not very durable. You spend a grand on saddle bags you would think the paint would last.
🤞🏾
Need the link for that
What muffler are you rocking? Looks like Tabs. Is it 50 cals or 4.5 bam sticks? I have 50 cals and REALLY WANT the dominator fender but am worried about fitment.
Those are D&D
Did you noticed any rubbing between rear fender extension and bags?
Not at all
Are those full stretched bads or the cvo tapered style?
Full stretch the bike is a special
Is the front fender also from Advanblack?
No
Yo Mac, do you still have your 19” prodigy wheel?
Yes
@@officialmac you selling it?
I bent my rim from a pothole, i’m covered through harley’s warranty but Harley doesn’t have any wheels in stock until February… been without my bike for two months now. It’s ridiculous.
I'm selling them as a set
Does the fender flutter in the wind?
No?
No hate no disrespect. I'm just a fan of the stock look. Bike looks wonderful. Extended bags i love. Stretched fenders and bags just not my style. Beautiful bike bruh.
None taken just stick around you might see a surprise coming!
Advanblack has a YT channel that shows you how to hide your antenna. You should check it out. I hid mine doing what he did. Bike looks great.
Good idea my problem is I don’t watch other RUclips channels 😂
Haha ok
I purchased and installed a Dominator Fender on my 19 Road Glide Special. First thing to know is the fender is plastic not metal. I had mine on the bike for about 9 months when the seat nut pulled completely out of the plastic. I spoke with AdvanBlack about it and found out the warranty is only 6 months, after several emails back and forth they offered to replace it but only if I paid $300.00 in shipping cost which ai would not do so my Dominator is in the trash and I am out $800.00. Bottom line is this stuff is made in China buy at your own risk.
Well that sucks... what was the cause of the seat nut pulling through? Did you have a screw holding it or no washer I just need to know for my own good the ppl watching
@@officialmac I have a Saddlemen Road Sofa seat and used a Saddlemen seat bolt, thumb screw type. They basically molded the nut into the plastic, there is no support for it at all just the nut. They need a steel backing plate on it or something to add more strength to it.
@@ocglide2566 Good point!
Whats the name of that color?
Snake venom