@@mrbelat Hndi ko po maset ang frequency nmin sa radio. If pwede po pa tutor kung paano mg program ng frequency sa cg828uv po. Yung lagyan xia ng maraming channel
@@tarhatamohammad5704 oh okay ill try to make a vlog on this madami na rin kasi nag ask ng same question sa akin paki check back na lang on my channel from time to time
yong pag ka 'bingi' has noting to do sa pag lagay ng antenna. in fact thats the very purpose of installing an antenna in a radio para 'makarinig and maka transmit'. you probably meant na ang pagka 'bingi' or sensitivity, is inherent in the design of every radio to a certain degree. even the big 3 brands (icom, kenwood, yaesu) is susceptible to this although at a very minimal rate. and the cignus compared to the big 3 brand is slightly more 'bingi' or less sensitive than them. mas superb pa rin ang rx performance ng big 3 brands. though for the price ng cignus its a great deal. at present im using it as a mobile radio in our van.
good day sir,meron bang way na while on xband rpt mode xa mkamonitor padin xa?meaning meron parin audio lumalabas sa internal speaker nya?as of now kasi ang way lang para ma monitor ko ang freq na nasa xbnad rpt is thru the speaker sa mic niya.thanks in advance :-)
Bondex Virtu check first ur setting sa output ng audio mo either thru the internal mic ng radio or thru your hand mic. press set, then goto menu 55 (HND SPK) then choose HSPKOFF
@@mrbelat nagawa ko na yan boss,gumagan nman internal speaker pag hindi nka xband rpt,pero pag nka xband rpt mode na xa nadisable kaya i turned on the hspk
Good day sir... can you make a tutorial on how to add direction of shift (+ or -) and Offset of 8.000 on this base radio. Malayong malayo po kasi sila sa portable radio.
Can I connect a Silver Eagle mic on this???? The other question is does it have the regular frequencies for a CB radio and SSB also on there! I know I'm ask lots of questions but I want to make sure.
as to the mic, i am not sure if you can use a silver eagle mic on it, might need some form of modification. best to check the schematic diagram of the mic to ensure compatibility. as to cb frequencies, no it won't work with cb. this radio works on vhf and uhf (144mhz and 440 mhz). cb is 11 meter band or 27mhz. as to ssb, this radio only works on voice fm transmission. if you want to work cb frequencies then you have to get a separate radio for it, a cb radio or an hf radio.
yes you can. though take note that its only 60% duty cycle like most mobile transciever so certain care should be done to ensure its reliability like installing a cooling fan if you are going to use it on a warm area
melikeuke hello. up until now my cg828 is working fine. i primarily use it as a crossband repeater. no intermodulation distortion experienced yet. cons... compared to my ic2730a, sensitivity is a bit less. hope this helps.
Hello po again Mr.Guevara. I know this is an old video. But how would you rate the receive sensitivity of the Cignus base type radios compared to baofeng, icom, and yaesu’s. Thanks for the response. 73s.
hello. well i find that the rx sensitivity of cignus is better than the baofengs. however the top 3 name brands, icom, yaesu and kenwood still has a better (a lot better) rx sensitivity than a cignus. hope this helps 73
Amboy Guevara Jr., thank you for always responding to my questions, sir. Btw, I always use the crossband repeating of the IC2730. Thanks to your video!
hi yes its still working perfectly. should you buy this product? its really up to you and your budget. if you can afford the 'branded' ones like icom or yaesu, go for those. hope this helps :)
Sir napansin ko kasi need mupa Turn ON ang Mobile Radio. By Pressing The Power Button. I there a way na automatic na ON yan. Hindi na Press ang Power Button. Kasi if Ilagay ito as Remote Repeater then Magkaroon ng Brownout. you need pa press Power Button to Reactivate.
@@jerryeverygo6851 i don't know of a way to automatically turn on the radio, what i can just recommend is to put stand by batteries together with your regulated power supply. there are power supply units that is capable of automatically switching to back up battery in case of brown out.
Norberto Lorente measurement of effective range is based on 'line of sight'. meaning if there are no obstruction between two antennas transmitting at 50 watts each theoritically puede 250km+. we experienced this before with a repeater setup at mt. sto. tomas in benguet (elevation around 7000 ft asl) contact with a manila station and beyond is possible. if there are obstructions in between, your effective communication range will greatly diminish. its a good thing you have your antenna installed on a 100ft tower as this will help.
@@mrbelat Good day Amboy, appreciate your reply. How's that rig of your's, is still doable to its best capacity? Planing to grab one. Have good one. Cheers
@@mrbelat Hello Amboy, Good Day Monday. Thanks for that as its my hesitation if ill grab me a Cignus or an ICom which you know that stand to its durability. Appreciate much...
Good day sir, Im planning on purchasing a cg828, will this work with my diamond f718 antenna(uhf)? Im gonna be using it as a crossband repeater... Btw, Great review po
hi this needs a dual band antenna also. if your f718 is only uhf then you cant use it for vhf as you will have a high swr on vhf even if you tune your f718 on uhf. best to get a dual band antenna.
meron akong cignus cg828. bakit pag nakacrossband repeater ako mahina ang signal? pero pag normal operation malakas ang signal. ganito ba talaga ang cignus cg828?
best po is for you to bring your unit at cignus service center sa raon to have it checked or replaced if its within the warranty period pa rin. mine does not have that problem po.
Hi Sir..ask ko lang po advice ninyo or recommendation Nakabili po ako ng CF22 antenna ano pong pwede na match na cignus base radio? At anong power supply po yun pwede ko bilhin? Salamat po sa inyong pagsagot.
cf22? im not familiar with this antenna but if you could give me its specs like what band or frequency it is for (vhf or uhf or dual band) i could probably give you a suggestion as to what radio will work with it.
@@sekyuvlog oh cp-22. if its a uhf antenna, any cignus uhf radio will work with that. like the cignus cg-818 uhf. just be sure to get the uhf version. you can use a 15 to 20 ampere cignus regulated power supply for this. also tune your antenna with an swr meter. hope this helps :)
@@makizaportiza7390 after i posted this video, i used it as a xband repeater for about a year. then it sat unused for a couple of years. but now i reactivated it and used it as a mobile radio on my vehicle. okay pa naman siya happy with its performance still. im glad i did not sell it when i was not using it anymore
Good evening SIr Amboy :) pls update po ng CG828 if its working fine presently, planning to buy soon. i have a15 amps 13.8v dc regulated power supply is this compatible for this radio? Thanks..
@@mrbelat may cg828uv at cg-f23uv din po ako pero di ko pa po kinakabit yung cg-f23uv antenna ko dahil wala pa po akong RG8 na coaxial cable. Ano po gamit ninyong coaxial cable diyan?
hi sir amboy ask ko lang po if 2 units of this can be connected via lan cable, then program 1 unit as TX, the other as RX to be use as a full duplex same band repeater without using a duplexer? just like here: ruclips.net/video/gF2z5pu7R48/видео.html it says Each unit has its own feed line and antenna. No duplexer is used in this setup.
Nice video and thanks. Sir required ba na may SWR sa ganitong setup, if yes ano mairecommend mo? I'm thinking again to reactivate my ham license. Portable lang kasi gamit ko ever since. TIA for time and reply.
hello. any radio setup always requires measuring the swr of your antenna. there are lots of swr meter available in the market right now. you can check eibradio.com good brands available locally are daiwa and comet.
@@mrbelat Ah ok po.hindi po b nasira ang radio?salamat po..pwedy ko po ba ito ma register sa ntc?nkabili na lc ako nito..papayag kaya sila na gamitin ko ito ng cross band?
@@searchingthethruth4776 no hindi nasira yong cignus ko, im using it as spare base rig right now. yes you can register this sa ntc. i actually registered mine with the ntc and its now on my RSL
@@mrbelat ok po tnx..my personal frequency n kc aq simplex vhf na nka register sa ntc..UHF nalang kolang..baka hindi na po nila ako mabigyan ng uhf frequency kc may vhf frequency na ako..salamat po..
good day po sir. newbie po sa ham. kindly enlighten me about this product. crossband repeater po na ito ay pwede na bang isetu as repeater without controller box? built in na po ba sa unit yung controller sir?
Amboy Guevara Jr. Wow! as in wow! Thank you so much sir for this valuable info. I'm planning to setup a crossband repeater soon as an upgrade. I'm currently using Icom IC-2100H base station VHF only. Once again sir thank you so much...God Bless and keep sharing po.
Amboy Guevara Jr. Thank u po sa suggestion sir, skin kac ngayon GP828 UV na antenna gamit ko sobrang hina po ng RX at TX nag order ako ng CG F23 kya lng wlang dalang cord, need po ba talaga na dual band din ang coxial cord at terminals?
Ryan Descalzota yes try to get an Rg8 coax cable with pPL259 connector. co axial cable or coax is the correct cable for vhf and uhf. you also need to check the swr reading of your antenna this is very important ideally it should be 1:1 reading or kahit hanggang 1:5
Amboy Guevara Jr. Ok po sir, thank u po... Mdyo bago plng po kac ako sa radio com, san po ba nkakabili online ng swr tester sir at mga magkano nman po yan?
is it possible to link 2 units of this via lan cable then program to same band repeater vhf to vhf or uhf to uhf using 2 antennas. no duplexer? just like on this video ruclips.net/video/gF2z5pu7R48/видео.html
hello, yes. any vhf or uhf radio will work with this. you just have to program the right frequencies between the hand held radio and this mobile radio for it to work.
on my wattmeter, it 60w on vhf. i dont have experience using cg818 so i can't tell which is better. main difference on the two however is the cg818 is mono band (vhf or uhf only) whereas this radio is dual band which can work both vhf and uhf.
Thanks for the informative video of cg828uv. I’m new to this hobby and trying to learn or figure out what I would need for my house and my hobbies
That was a good one to test out just as I digest and shall catch more of your videos. Cheers..!
Will buy one.
Thanks for the great review sir
i have alinco DR638 really love it but i need a back up and the radio you have is just the right price from lazada
pano po ba e set ang 446.550?
Im asking regarding Cignus CG828 repeater mode setting ...can i set this to VHF to VHF frequency and UHF to UHF po?...
no you cant do repeater mode on the same band. its a crossband repeater radio. as the name suggest only vhf to uhf and vice versa works as repeater.
Thank you for the knowledge....
Good day sir. Paano po mg set ng multiple frequency sa cg 828uv?
hello po. can you pls elaborate on your question po hindi ko masyado maintindahan yong question niyo
@@mrbelat Hndi ko po maset ang frequency nmin sa radio. If pwede po pa tutor kung paano mg program ng frequency sa cg828uv po. Yung lagyan xia ng maraming channel
@@tarhatamohammad5704 oh okay ill try to make a vlog on this madami na rin kasi nag ask ng same question sa akin paki check back na lang on my channel from time to time
Sir, What's the best home base antenna for CG-828? I'm planning to install my radio antenna on my roof top (3 story building).
choose the highest db gain dual band antenna such as the cignus cgf23 uv.
Sa pagtransmit ok sya pero sa pagreceive problem sya mahina magreceive ang CG 828UV
sir anong band po ginamit nyo sa received nya?
sige po sir thank you
What Is The Function Of USB Port In The Side?
Thank You ♥️
may tutorial po ba adding a channel rx and tx
hindi ba to nabibingi pag nka aerial antenna?
yong pag ka 'bingi' has noting to do sa pag lagay ng antenna. in fact thats the very purpose of installing an antenna in a radio para 'makarinig and maka transmit'. you probably meant na ang pagka 'bingi' or sensitivity, is inherent in the design of every radio to a certain degree. even the big 3 brands (icom, kenwood, yaesu) is susceptible to this although at a very minimal rate. and the cignus compared to the big 3 brand is slightly more 'bingi' or less sensitive than them. mas superb pa rin ang rx performance ng big 3 brands. though for the price ng cignus its a great deal. at present im using it as a mobile radio in our van.
Maganda po tong cross band repeater mga 50 to 70 km, kayang kaya and maganda ang received nito
Sir pwede ba gamitin yun antenna GP 828 sa unit na yan?
if you are referring to the cignus gp 828 dual band antenna, yes puede siya or any dual band antenna for that matter
Very similar to the Anytone AT-5888UV III.
good day sir,meron bang way na while on xband rpt mode xa mkamonitor padin xa?meaning meron parin audio lumalabas sa internal speaker nya?as of now kasi ang way lang para ma monitor ko ang freq na nasa xbnad rpt is thru the speaker sa mic niya.thanks in advance :-)
Bondex Virtu check first ur setting sa output ng audio mo either thru the internal mic ng radio or thru your hand mic. press set, then goto menu 55 (HND SPK) then choose HSPKOFF
@@mrbelat nagawa ko na yan boss,gumagan nman internal speaker pag hindi nka xband rpt,pero pag nka xband rpt mode na xa nadisable kaya i turned on the hspk
@@mrbelat wala talaga audio lumalabas pag nka xband rpt mode na xa,or baka ganyan talaga settings nya..sa inyu meron ba audio sa internal speaker nya kahit nka xband rpt mode?
@@rogeliogonzales6744 yes pag naka xband rptr ka walang audio maririnig. the only way i monitor it is using another portable
how can i enable the ctcss code on cg828
nice radio//nice review
thank you
Good day sir... can you make a tutorial on how to add direction of shift (+ or -) and Offset of 8.000 on this base radio. Malayong malayo po kasi sila sa portable radio.
yes hopefully i can do it soon
Can I connect a Silver Eagle mic on this???? The other question is does it have the regular frequencies for a CB radio and SSB also on there! I know I'm ask lots of questions but I want to make sure.
as to the mic, i am not sure if you can use a silver eagle mic on it, might need some form of modification. best to check the schematic diagram of the mic to ensure compatibility. as to cb frequencies, no it won't work with cb. this radio works on vhf and uhf (144mhz and 440 mhz). cb is 11 meter band or 27mhz. as to ssb, this radio only works on voice fm transmission. if you want to work cb frequencies then you have to get a separate radio for it, a cb radio or an hf radio.
@@mrbelat thanks for the answer! Appropriated for sure.
ganda explanation. tnx for that master. working pa ba to? ano feedback mo sir after years of use?
yes it's still working fine thanks
Is it possible to repeat from UHF to UHF using this repeater?
its a cross band repeater so it only works on uhfvhf or vice versa and not uhf to uhf or vhf to vhf. 73
am thinking of getting one are you still happy with you radio?
yes i am
Can i use this crossband repeater mode for whole day wer frequency many modulators?
yes you can. though take note that its only 60% duty cycle like most mobile transciever so certain care should be done to ensure its reliability like installing a cooling fan if you are going to use it on a warm area
sir, how is your cg-828 working? does it have a good receive? how about intermod? any cons?
melikeuke hello. up until now my cg828 is working fine. i primarily use it as a crossband repeater. no intermodulation distortion experienced yet. cons... compared to my ic2730a, sensitivity is a bit less. hope this helps.
Sir good day kahit bka simplex ka sa handset gagana ba yan as long as nka set klng sa freq ng xband? Tia
you have to exit crossband mode in order to work simplex. if you are on crossband mode, you can't use the radio to transmit via its mic.
nice review bro
Thank you :)
Hello po again Mr.Guevara. I know this is an old video. But how would you rate the receive sensitivity of the Cignus base type radios compared to baofeng, icom, and yaesu’s. Thanks for the response. 73s.
hello. well i find that the rx sensitivity of cignus is better than the baofengs. however the top 3 name brands, icom, yaesu and kenwood still has a better (a lot better) rx sensitivity than a cignus. hope this helps 73
Amboy Guevara Jr., thank you for always responding to my questions, sir. Btw, I always use the crossband repeating of the IC2730. Thanks to your video!
Magkano yan ngayon sir?
no idea now maybe nasa 12-15k range
gud day sir can i know sir how to remove the timer
hello what timer po are u referring
Can it function, i mean repeater mode on vhf to vhf, not vhf to uhf crossband?
Example I want to set 144.350 and 151.450 would the reoeater mode function? 73
@@JunHinagdanan hello its only a crossband repeater which works vhf to uhf and vice versa only
@@mrbelat Thanks for your reply sir. 73
Hi po if its personal use and i wont disturb any existing licensed operators pwede bang di na kumuha ng license?
its always better to get your own license. you can check out www.para.org.ph on how you can secure your own license.
How much sir
sir, 60W talaga for real/ or less
paulo blanco yes on VHF its 60 watts on my swr meter and 40 watts on UHF
Hi is it still working? Is there any notable changes since you bought it po? Should i buy this product instead of other products?
hi yes its still working perfectly. should you buy this product? its really up to you and your budget. if you can afford the 'branded' ones like icom or yaesu, go for those. hope this helps :)
Can i also use it as UHF to UHF repeater?
no you cannot, it only works as a cross band repeater, vhf to uhf or uhf to vhf.
It can work BUT only if all radios communicating with that Xband repeater are DUAL band radios. ^_^
Sir napansin ko kasi need mupa Turn ON ang Mobile Radio. By Pressing The Power Button.
I there a way na automatic na ON yan. Hindi na Press ang Power Button.
Kasi if Ilagay ito as Remote Repeater then Magkaroon ng Brownout. you need pa press Power Button to Reactivate.
the power button is intended for just that, to turn the power on and off.
@@mrbelat Pano nga ba? Ilalagay nmin sa bundok kasi baka mag brownout pano yun?
@@jerryeverygo6851 i don't know of a way to automatically turn on the radio, what i can just recommend is to put stand by batteries together with your regulated power supply. there are power supply units that is capable of automatically switching to back up battery in case of brown out.
anu pong gamit nyong power supply? ilang amps po dapat? planning to buy.
a 20 amps regulated power supply would suffice for the uv-828
Ask sana ako maximum effective range between 2 cg 828 lets say 100 ft. height both antennas using f23uv.
mountinous po ang location ng isa.
Norberto Lorente measurement of effective range is based on 'line of sight'. meaning if there are no obstruction between two antennas transmitting at 50 watts each theoritically puede 250km+. we experienced this before with a repeater setup at mt. sto. tomas in benguet (elevation around 7000 ft asl) contact with a manila station and beyond is possible. if there are obstructions in between, your effective communication range will greatly diminish. its a good thing you have your antenna installed on a 100ft tower as this will help.
Thank you sir i gained an idea from your shared experienced. Merry Christmas.
pwede po ba ito gamitin sa baofeng 888, e pair po
sef mags yes puede you have to program them both on the same frequency
Good day Amboy, By any chance can Crossband repeat be save in memory channels? await for your good reply... Cheers
havent tried saving my crossband freq on the radio before. and i dont recall if i did.
@@mrbelat Good day Amboy, appreciate your reply. How's that rig of your's, is still doable to its best capacity? Planing to grab one. Have good one. Cheers
@@sonnyjrcruz3022 hi sonny good day. the radio is still alive but im not using it anymore im using the icom ic2730a na
@@mrbelat Hello Amboy,
Good Day Monday. Thanks for that as its my hesitation if ill grab me a Cignus or an ICom which you know that stand to its durability. Appreciate much...
@@sonnyjrcruz3022 hi bro. of course there's no comparison against any of the big 4. if u can get an icom better, just make sure its original bro.
Good day po sir matanong ko lang pag naka activate po ba ung xband rpt pwede din ba sya mag ptt
if its on cross band repeater mode, the ptt will not work
gandang buhay....pwede po bang setup ng v to v sa cg 828 as repeater.....
hi, cross band repeater only works on vhf and uhf.
Sir pwede ba ma eduplex yong vhf freq.pag nka xband?
cross band repeater function only works on uhf to vhf and vice versa. it cannot act as a repeater on vhf only or uhf only
Good day sir,
Im planning on purchasing a cg828, will this work with my diamond f718 antenna(uhf)? Im gonna be using it as a crossband repeater... Btw, Great review po
hi this needs a dual band antenna also. if your f718 is only uhf then you cant use it for vhf as you will have a high swr on vhf even if you tune your f718 on uhf. best to get a dual band antenna.
@@mrbelat thank you for the reply! Follow up question po, what antenna would you recommend for this?
B4C2D0 i used i cignus f23uv before it worked fine but any dual band base antenna would do just choose the one with the highest db gain
@@mrbelat thank you for the time and info sir. Good day!
@@mrbelat sir follow up question po, do i still need to calibrate and tune the f23uv antenna? and where can i buy one? thanks again sir!
Pag binili mo yan repeater na talaga you dont need to buy 2 of them to link 2 devices as repeater?
no you don't have to buy 2 units. one unit can act as a stand alone cross band repeater (vhf to uhf and vice versa)
meron akong cignus cg828. bakit pag nakacrossband repeater ako mahina ang signal? pero pag normal operation malakas ang signal. ganito ba talaga ang cignus cg828?
best po is for you to bring your unit at cignus service center sa raon to have it checked or replaced if its within the warranty period pa rin. mine does not have that problem po.
Bro same problem here, may solution naba sayo?
Sir Is it ok to use hi power on xband repeater?
hi yes you can. but if your usage is going to be heavy, putting an auxiliary fan to help cool your radio would be best.
@@mrbelat hello sir, does this model has a built in fan just like the anytone?
@@boybutingting9156 yes it has a built in fan on the heat sink at the back of the radio
Sir, pano po fix ang OVERVOL na lumalabas sa screen?
haven't encountered this on my radio so i have no idea. sorry
ganun din sa akin OVERVOL din lumalabas pag dalawang vhf naka standby... yung isang unit ko walang OVERVOL na lumalabas.
Hi Sir..ask ko lang po advice ninyo or recommendation Nakabili po ako ng CF22 antenna ano pong pwede na match na cignus base radio? At anong power supply po yun pwede ko bilhin? Salamat po sa inyong pagsagot.
cf22? im not familiar with this antenna but if you could give me its specs like what band or frequency it is for (vhf or uhf or dual band) i could probably give you a suggestion as to what radio will work with it.
@@mrbelat Cignus CP-22 UHF 400 to 470 MHZ Antenna. Sir. Salamat po sa time sa pagsagot ng tanong ko po..
@@sekyuvlog oh cp-22. if its a uhf antenna, any cignus uhf radio will work with that. like the cignus cg-818 uhf. just be sure to get the uhf version. you can use a 15 to 20 ampere cignus regulated power supply for this. also tune your antenna with an swr meter. hope this helps :)
@@mrbelat Salamat po Sir.
pag mag brwnout hinde nag o on ulit , anong gawin ko?..
ganon talaga siya you have to manually turn back the power on.
Totoo bang madaling masira ang xg 828uv.balak ko kasing bumili.Kaya lng takot ako kasi Sabi Nila madaling masira po daw
@@makizaportiza7390 after i posted this video, i used it as a xband repeater for about a year. then it sat unused for a couple of years. but now i reactivated it and used it as a mobile radio on my vehicle. okay pa naman siya happy with its performance still. im glad i did not sell it when i was not using it anymore
Good evening SIr Amboy :) pls update po ng CG828 if its working fine presently, planning to buy soon. i have a15 amps 13.8v dc regulated power supply is this compatible for this radio? Thanks..
jarney urdaneta hello. yes my cg828 is still working fine. and yes your 13.8vdc power supply will work with this radio. hope this helps :)
Paano kaya maaalis timer ng reapiter namamatay cya kahit hindi ioff
o baka bilhin po muna bago mag license?
here's the NTC guideline that might help you:
www.angelfire.com/or/philccom/act3846.html
good day sir, if i may ask ano pong aerial ang gamit ninyo for this model tia...
hi, im using a cignus cg-f23uv dual band antenna with it now
@@mrbelat may cg828uv at cg-f23uv din po ako pero di ko pa po kinakabit yung cg-f23uv antenna ko dahil wala pa po akong RG8 na coaxial cable. Ano po gamit ninyong coaxial cable diyan?
@@michaeldelta48 I use an RG8 cable. on this set up para minimal yong loss
@@mrbelat I see thanks sir.
hi sir amboy ask ko lang po if 2 units of this can be connected via lan cable, then program 1 unit as TX, the other as RX to be use as a full duplex same band repeater without using a duplexer? just like here: ruclips.net/video/gF2z5pu7R48/видео.html it says Each unit has its own feed line and antenna. No duplexer is used in this setup.
Nice video and thanks. Sir required ba na may SWR sa ganitong setup, if yes ano mairecommend mo? I'm thinking again to reactivate my ham license. Portable lang kasi gamit ko ever since. TIA for time and reply.
hello. any radio setup always requires measuring the swr of your antenna. there are lots of swr meter available in the market right now. you can check eibradio.com good brands available locally are daiwa and comet.
@@joelrapada8002 yes when on xband mode, you cannot tx. u have to exit xband mode. what i do is to use a portable to tx when on xband mode.
sir planning to buy this one for the purpose for crossband repeater...sir so far anu pong distance na na try nyo na sa transmit at recieve?
25 kms on portable. probably more if on mobile base radio yong isa.
Sir that 25 km may obstruction yan siya like buildings and houses?
Good day sir Amboy ask ko lang kung ilang feet ang mast ng antenna nyo para dito? Tia
@@enzopulido2579 25km with no tall buildings in between.
@@ernestofeliciano589 60ft above the ground
Pag ang gamit mong pag talk ay yung mic ng repeater matratransmit ba sa dalawang freq?
you cannot use the mic when on crossband repeater mode
Gud am sir amboy guevera.
Ano po update sa repeater ninyo..ilang kilometro po ang lau ng radio ninyo..salamat..
hello, im not using this now, im using an icom fr6000 repeater right now.
@@mrbelat Ah ok po.hindi po b nasira ang radio?salamat po..pwedy ko po ba ito ma register sa ntc?nkabili na lc ako nito..papayag kaya sila na gamitin ko ito ng cross band?
@@searchingthethruth4776 no hindi nasira yong cignus ko, im using it as spare base rig right now. yes you can register this sa ntc. i actually registered mine with the ntc and its now on my RSL
@@mrbelat ok po tnx..my personal frequency n kc aq simplex vhf na nka register sa ntc..UHF nalang kolang..baka hindi na po nila ako mabigyan ng uhf frequency kc may vhf frequency na ako..salamat po..
@@searchingthethruth4776 no hindi naman nasira. i was able to register mine sa ntc naman.
good day po sir. newbie po sa ham. kindly enlighten me about this product. crossband repeater po na ito ay pwede na bang isetu as repeater without controller box? built in na po ba sa unit yung controller sir?
dannie dl reyes yes it cud work as a stand alone crossband repeater with no other eqpt needed
Amboy Guevara Jr. Wow! as in wow! Thank you so much sir for this valuable info. I'm planning to setup a crossband repeater soon as an upgrade. I'm currently using Icom IC-2100H base station VHF only. Once again sir thank you so much...God Bless and keep sharing po.
ano po ba sir ang pagbili niyan? ilalicense po ba muna o hinde?
better to have your license first. PARA does weekly orientation. check it out at www.para.org.ph.
Ano pong antenna recommended nyo pra jan sir?
any vhf/uhf antenna will do. but i used a cignus f23uv on it before, nasira lang ng bagyo. but it performed really well though.
Amboy Guevara Jr. Thank u po sa suggestion sir, skin kac ngayon GP828 UV na antenna gamit ko sobrang hina po ng RX at TX nag order ako ng CG F23 kya lng wlang dalang cord, need po ba talaga na dual band din ang coxial cord at terminals?
Ryan Descalzota yes try to get an Rg8 coax cable with pPL259 connector. co axial cable or coax is the correct cable for vhf and uhf. you also need to check the swr reading of your antenna this is very important ideally it should be 1:1 reading or kahit hanggang 1:5
Amboy Guevara Jr. Ok po sir, thank u po... Mdyo bago plng po kac ako sa radio com, san po ba nkakabili online ng swr tester sir at mga magkano nman po yan?
@@ryandescalzota1393 you can check with du1eib, www.eibradio.com depends on the brand and model pero around 3k+
Sir magkano po yan at san nakakabile.
i believe you can get this from olx.com or even lazada
is it possible to link 2 units of this via lan cable then program to same band repeater vhf to vhf or uhf to uhf using 2 antennas. no duplexer? just like on this video ruclips.net/video/gF2z5pu7R48/видео.html
i havent tried that so no idea if that will work
Hi po im new for radio. May ask po if compatible po ba sa baofeng radio series 888s and 999s model?
yes it is
hello, yes. any vhf or uhf radio will work with this. you just have to program the right frequencies between the hand held radio and this mobile radio for it to work.
60w po ba ito sir, mas ok po ba ito ky sa cg818?
on my wattmeter, it 60w on vhf. i dont have experience using cg818 so i can't tell which is better. main difference on the two however is the cg818 is mono band (vhf or uhf only) whereas this radio is dual band which can work both vhf and uhf.