Hi, Thanks for reaching out! These are dyno proven power and torque figures. All figures we quote for hardware gains have been obtained through dynamometer testing. If you have any further questions, please don't hesitate to get in touch! Kind regards, - AJ, Forge Motorsport
@@forgemotorsport was definitely worth it, fortunately the bolt dropped onto the undertray so with an Apple Watch charger and a lot of patience I managed to recover it! It was the bolts for the adapter which sits right against the turbo
I installed it few minutes ago. Took me 3hours but everything went fine (i guess). Tomorrow i'll start the engine to see the results because it is a bit late and i got a downpipe.😂
Hello, Thank you for reaching out! We haven't specifically tested this application previously, however if you email an image of your engine bay to dev@forgemotorsport.com, along with an accompanying message, we should be able to confirm this for you. 🤟 Kind regards, - AJ, Forge Motorsport
We flip the battery clamp as we found it rubbed on the silicone hose and in doing so it removes the risk/wear. However if your set up is different and you would like us to look into it more, we would be happy to help. Please email dev@forgemotorsport.co.uk with a picture of your set up and you enquiry. Thanks!
Hi Magnus, If you do not have this piece you can simply skip this step. Here is a link to the product on our website, where you can select the instructions tab. Here we have the written instructions that explains this: www.forgemotorsport.co.uk/15_TSI_EVO_Intake_VW_Audi_Seat_and_Skoda--product--1900.html Thank you
@@forgemotorsport thank you, another question, the heat shield box doesent seem to fit in the bay, i cant get it down over the rubber tips, do i need to move some cables or something?
@@magnustoftekruse7823 Hi Magnus, did you follow the instructions provided? To install the alloy filter tray, angle the cold air feed side first then line up the rubber mounting bushes with the locating pegs too push into position. Here is a direct link to the instructions - www.forgemotorsport.co.uk/?download_id=809
Hi Zlaay, it just means that the induction kit will fit better than if the battery was left as it was, so we can make the most of the space available in the engine bay :)
Hi @Car_Enthusiast_1 - This particular vehicle was a right hand drive, however we offer options for both! On the website simply select your 'Driver Side' from the dropdown list. Don't hesitate to reach out if you need any further information! :) www.forgemotorsport.co.uk/15_TSI_EVO_Intake_VW_Audi_Seat_and_Skoda--product--1900.html
During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust, the figure can be far greater as the OEM intake system is restricted on high performance engines! Hope this helps, check out the website listing for more information - www.forgemotorsport.co.uk/15_TSI_EVO_Intake_VW_Audi_Seat_and_Skoda--product--1900.html
Here is a link to the FMINDK35: www.forgemotorsport.co.uk/15_TSI_EVO_Intake_VW_Audi_Seat_and_Skoda--product--1900.html Alternatively you can use the vehicle search on our website :) Thanks!
Please check out the website description for all the information! www.forgemotorsport.co.uk/15_TSI_EVO_Intake_VW_Audi_Seat_and_Skoda--product--1900.html
![Best 1.4 TFSi TSi Mods & Upgrades [Seat, Audi, VW, Skoda Tuning Guide]](http://i.ytimg.com/vi/_F9ex36vx7M/mqdefault.jpg)
![Best 1.4 TFSi TSi Mods & Upgrades [Seat, Audi, VW, Skoda Tuning Guide]](/img/tr.png)
![KSI - Dirty [Official Visualiser]](http://i.ytimg.com/vi/VoDh1h1dPUE/mqdefault.jpg)
Could you make a video fitting recirculation valve
Hello. It's on our planned videos, but in the meantime, you can find full instructions here: www.forgemotorsport.co.uk/?download_id=754
The 11hp and 13 lb/ft torque gain are claimed figures or dyno tested figures?
Hi,
Thanks for reaching out! These are dyno proven power and torque figures. All figures we quote for hardware gains have been obtained through dynamometer testing.
If you have any further questions, please don't hesitate to get in touch!
Kind regards,
- AJ, Forge Motorsport
@ thanks for replying🙌🏻 installing it soon
Installed it, not to challenging- but I did manage to drop a bolt which made things take longer. Sounds properly good now
Glad it sounds so good! Shame about the bolt, but at least it was worth it! 🤣
@@forgemotorsport was definitely worth it, fortunately the bolt dropped onto the undertray so with an Apple Watch charger and a lot of patience I managed to recover it! It was the bolts for the adapter which sits right against the turbo
@@williamthebutcherssonprodu227 Good thinking!! Great job 💪
I installed it few minutes ago. Took me 3hours but everything went fine (i guess). Tomorrow i'll start the engine to see the results because it is a bit late and i got a downpipe.😂
Fit it also on a octavia 1.5 2020 5e
Or there no problems with the computer of the car when disconnected the battery
Hello. If you can email us a photo of your engine bay to media@forgemotorsport.co.uk and we can confirm!
Does it fit the 23 Jetta sport 1.5?
Hello,
Thank you for reaching out! We haven't specifically tested this application previously, however if you email an image of your engine bay to dev@forgemotorsport.com, along with an accompanying message, we should be able to confirm this for you. 🤟
Kind regards,
- AJ, Forge Motorsport
Does it fit in a 2022 trock 1.5evo tsi??
Email us a photo of your engine bay with this product code and we can see if it is compatible! sales@forgemotorsport.co.uk
How necessary is it to remove the battery and flip the clamp since my clamp won’t allow me to flip it ?
We flip the battery clamp as we found it rubbed on the silicone hose and in doing so it removes the risk/wear. However if your set up is different and you would like us to look into it more, we would be happy to help. Please email dev@forgemotorsport.co.uk with a picture of your set up and you enquiry. Thanks!
my golf doesn't have the piece mentioned at 02:29, what should I do?
Hi Magnus,
If you do not have this piece you can simply skip this step. Here is a link to the product on our website, where you can select the instructions tab. Here we have the written instructions that explains this: www.forgemotorsport.co.uk/15_TSI_EVO_Intake_VW_Audi_Seat_and_Skoda--product--1900.html
Thank you
@@forgemotorsport thank you, another question, the heat shield box doesent seem to fit in the bay, i cant get it down over the rubber tips, do i need to move some cables or something?
@@magnustoftekruse7823 Hi Magnus, did you follow the instructions provided? To install the alloy filter tray, angle the cold air feed side first then line up the rubber mounting bushes with
the locating pegs too push into position. Here is a direct link to the instructions - www.forgemotorsport.co.uk/?download_id=809
Hello guys! It also fits for the version of 1.5 TSI 130 HP ?
I hope you answer my question!
Thank you!
😀
Hello!
Thanks for your question. Yes it will fit the 130hp model :)
Thanks! Zac - Forge UK
install on golf 8 1.5 tsi with 150 ps ?
Dose this fit the m8 gold r-line 150ps 21 place also die it attach the the standard air filter box
Dose
Would this go on a 2022 VW Tiguan 1.5TFSI?
It should do, but send us a photo of your engine bay and we can confirm! Please use sales@forgemotorsport.co.uk :)
Hey sorry about that but i dont understood why you switch Battery side ?
Hi Zlaay, it just means that the induction kit will fit better than if the battery was left as it was, so we can make the most of the space available in the engine bay :)
This is a rhd vehicle or lhd?
Hi @Car_Enthusiast_1 - This particular vehicle was a right hand drive, however we offer options for both! On the website simply select your 'Driver Side' from the dropdown list. Don't hesitate to reach out if you need any further information! :) www.forgemotorsport.co.uk/15_TSI_EVO_Intake_VW_Audi_Seat_and_Skoda--product--1900.html
What is the power increase with that + remap?
During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust, the figure can be far greater as the OEM intake system is restricted on high performance engines! Hope this helps, check out the website listing for more information - www.forgemotorsport.co.uk/15_TSI_EVO_Intake_VW_Audi_Seat_and_Skoda--product--1900.html
Can you tell me how to find one?
Here is a link to the FMINDK35: www.forgemotorsport.co.uk/15_TSI_EVO_Intake_VW_Audi_Seat_and_Skoda--product--1900.html
Alternatively you can use the vehicle search on our website :) Thanks!
Sound ?
We don't have a sound clip unfortunately but we can get one for you soon!
@@forgemotorsport I want to hear the sound before I buy
Wont disconnecting the battery cause electrical problems on the dash?
No this doesn't cause any issues :)
may have the car throw a warning light but always self clears as soon as you drive off
Réel gain ? Hp ? Stage 1 ?
Please check out the website description for all the information! www.forgemotorsport.co.uk/15_TSI_EVO_Intake_VW_Audi_Seat_and_Skoda--product--1900.html
Will this fit a 23 Jetta sport with the 1.5t
Hello Brandon. If you can email a picture of your engine bay to media@forgemotorsport.co.uk as that will help us confirm fitment :)
Did you order and test fit?