Mercedes Bulb Replacement Tail Lamp Brake Light DIY in minutes.

Поделиться
HTML-код
  • Опубликовано: 15 сен 2024
  • If you are getting the dreaded check tail light/brake light warning, this video will show you how to quickly and easily replace the burned out bulb.
    Make sure your lights are switched off and the key is not in the ignition before beginning the replacement. See your owner's manual for proper bulb type and wattage.

Комментарии • 52

  • @smiles4u92
    @smiles4u92 3 года назад +3

    Thank you!!! Buddy at Firestone was saying it would cost $125 to replace the bulbs and I brought the replacement bulbs with me. You are a life saver!!!!

  • @davesuiter
    @davesuiter 10 лет назад +2

    Thanks for taking the time to share this simple procedure with us; you are a good American. Mercedes dealerships charge big bucks to remedy such a small problem.

  • @amccain32
    @amccain32 3 года назад +4

    Thank you so much for this my tail light just went out

  • @JimmieKepler
    @JimmieKepler 5 лет назад +1

    Thank you. Could not have done it without your video.

  • @biggamee
    @biggamee 4 года назад +1

    Thank you very much, took a total of 4 minutes!!! Much appreciated

  • @wjstewdog
    @wjstewdog 7 лет назад +4

    Great video. thank you. you made it look easy. I look forward to replacing the bad bulb

  • @missmartin85
    @missmartin85 5 лет назад +5

    Thank you! As helpless as I may have appeared , I was confident in my ability to not need a man for this. (Aside from this nice man on youtube lol). I did it in 2 min

    • @randall928
      @randall928  5 лет назад +3

      Ah, you have found your inner mechanic!

    • @missmartin85
      @missmartin85 5 лет назад

      @@randall928 😊 you just got a new subscriber!

    • @georgeshilaire1721
      @georgeshilaire1721 3 года назад

      4euu677eريسوا4trerdetertvvvtr

  • @erradiYT
    @erradiYT 10 лет назад +14

    Thank you sir, you save me trip to the dealer and big $$. Nice and informative video.

  • @ahmadtalsaadi
    @ahmadtalsaadi 9 лет назад +2

    Thanks for the video, I thought that I have to remove all the lining cover! now it is easy to do by just removing the fuses cover :)

  • @yowo8888
    @yowo8888 7 лет назад +1

    thanks. for showing how to push turn and pull out the light bulb.

  • @chokechk
    @chokechk 3 года назад +1

    Thank you for making this Video!

  • @gorditadenabo
    @gorditadenabo 3 года назад +1

    That was an awesome video very informative THANK YOU FOR SHARING .. 🙏🏽🙏🏽🙏🏽

  • @magsi6570
    @magsi6570 Год назад

    Thank you so much that looks so easy. Can you do a video for the headlight?

  • @costes07
    @costes07 5 лет назад +1

    Many thanks excellent video and well explained

  • @tomgillitt3679
    @tomgillitt3679 7 лет назад +1

    Most helpful, thanks for uploading

  • @arielpage511
    @arielpage511 9 лет назад +7

    I wish you had said which one is the brake one

  • @pamelabooker7838
    @pamelabooker7838 4 года назад +1

    Thank you so much!

  • @RyanDiazRealtor
    @RyanDiazRealtor 5 лет назад +2

    Thank you sir.

  • @HARLANGENEPARROTT
    @HARLANGENEPARROTT Год назад

    Please give me some advice and help.
    I am 70+ years old and my old 1990 350dsl Mercedes will NOT pass inspection here in Louisiana.
    Here is the problem.
    1990 Mercedes 350dsl When I turn on the parking lights the tail lights work, BUT when I turn on the head lights the Drivers side tail light goes out.

  • @maryloukaye6072
    @maryloukaye6072 9 лет назад +1

    Is the process different for a Mercedes SLK 230?

  • @shaoguowu6128
    @shaoguowu6128 9 лет назад +1

    super thanks! It saves me $$ :)

  • @fnazazel750
    @fnazazel750 7 лет назад

    is this the same for 2011? my mother called me saying her brake light is out she lives an hour away and would like to help her.

  • @lfckp
    @lfckp 8 лет назад

    Hi, do you have tips to do it in a Tmodel? I look in the back door it has no lucka to access the taillights. Modell E-200 Wagon W211. Thanks

  • @dreamdream9285
    @dreamdream9285 5 лет назад

    My w204 tail light cable connector (black wire melted seriously) is just burned, do you know how to fix it

  • @natalieragland
    @natalieragland 9 лет назад

    How do you change the 2003 Mercedes Benz e500. the bulbs can't be taking out of the track.

  • @1994Mattg
    @1994Mattg 6 лет назад

    Thank you boss

  • @MidNiteR32
    @MidNiteR32 2 года назад

    Do you have a part number for that bulb tray/housing? Mine is starting to flake out where the brake light isn’t turning on anymore because of the humidity corrosion.

    • @randall928
      @randall928  2 года назад

      Have you had the factory recall done by your dealer, for the tail lights?

    • @MidNiteR32
      @MidNiteR32 2 года назад

      @Liqidarts Yeah, it was done a while ago but it’s flaking again, they won’t do it again for free because it was already done.
      I resoldered the wiring myself two years ago but now the bulb housing is acting up.

    • @randall928
      @randall928  2 года назад

      @@MidNiteR32 You might find the part number molded into the plastic, you might also switch to LED bulbs they draw less current, but be sure to buy good ones like Sylvania so you don't get bulb errors.

  • @premowilson595
    @premowilson595 3 года назад

    I have 2005 e class my brake lights are not working right or left think it's a bulb

  • @gorditadenabo
    @gorditadenabo 3 года назад

    Can u tell me if the message in the dashboard “replace left tail light” does it reset automatically or I have to do another step to reset .. if so how do I reset the message

    • @randall928
      @randall928  3 года назад

      This message should reset automatically after a few restarts. If you replaced a standard bulb with an LED bulb the message may not go away, as the car is looking at the current flow to the bulb

    • @gorditadenabo
      @gorditadenabo 3 года назад

      OMG ... you are SO SMART and so kind indeed i replace it with led bulb ... YOU ARE THE BEST .. blessings 🙏🏽🙏🏽🙏🏽

    • @lldscooo5318
      @lldscooo5318 3 года назад

      What kind of bulb did u use for it not to be LED

    • @gorditadenabo
      @gorditadenabo 3 года назад

      @@lldscooo5318 i used the led .. NOT A good choice now I have a error message .. to replace the tale light bulb” I used have used the original one … I hate this bc I spend 20ish but next time I

    • @lldscooo5318
      @lldscooo5318 3 года назад

      @@gorditadenabo great thanks !!

  • @skiene
    @skiene 9 лет назад

    what model of Mercedes is this?

  • @mercpindi5522
    @mercpindi5522 3 года назад

    I wouldn't touch the bulbs

    • @randall928
      @randall928  3 года назад

      Good advice, wear some cotton or latex gloves!

  • @roxannhallquist8872
    @roxannhallquist8872 2 года назад

    All those bulbs and you don't say what one is the brake light thanks.

    • @randall928
      @randall928  2 года назад

      I never say the right things

  • @Bimmersixx
    @Bimmersixx 6 лет назад

    A repair video doesn't do much good when you've already accessed how to get to the bulb. That's what people are wanting to know. Pretty sure I can figure out how to unplug/plug a bulb when the housing is already removed.

  • @HM-ps1fr
    @HM-ps1fr 5 лет назад +1

    Thank you so much