I love these kinds of videos. Thanks. I don't carry a Leatherman, but they do command a decent price if you choose to re-sell it. Not long ago, I came across a pick-up truck full of lower-quality tools which I had to take with some tool boxes I purchased from a man who just wanted it all gone. I sorted out the decent tools then figured I would donate the rest. A friend agreed to take the rest to a local auction in a set of 5 gallon buckets. We got over $300 for the tools, splitting the profits from our plunder of "junk". As you know, the key is to get the junk out of your house as fast as you can. Good luck and thanks again.
Wifes name and pic. Mark here. The Specialzed bike im guessing you can sell $200++ or give to a son or grandson; don't be sorry you got it. I can imagine so many others like me seeing various tools, gadgets in your score, saying "hey I want that" but dang I live in Ca. So yes I'm still watching. Your idea to throw the crap foreign tools aside without saying anything is good, speeds things along. Put junk tools out at curb in a box marked Free. You rock Mr Pete.
Those also looked like the "mini" version, which had an extension in the handle that folded out to make them full size. But being the old ones the handles were not real comfortable.
I was given a Leatherman about 15 years ago, but the screwdriver blade wasn't tempered properly and it broke. So I _rarely_ use it for anything because I don't trust it, even though I had always heard that they were top notch. Since it was a gift, I don't have any "proof of purchase," so I don't know whether it's worth fooling with the warranty system?
The compressor could have been saved with a little caution when starting up something like that compressor. You can tell by the sound when the start windings don't open, and can shut it off before it was smoke signaling for help. Little cleanup of the start switch or 'govener" and you would be good to go. I know its not a high high quality device, but just to burn it up don't set well with the tite-wad in me..
A good friend back in 1953 went on a tour of the local newspaper. A employee there give him the lead plate that was used for a ad on the new 1953 Corvette. He still has the lead plate.
Yep, now finding places for all the new stuff, and then if you are like me (72 yrs old) remembering where you put the stuff. It was enjoyable watching you sort through the "stuff".
@@mrpete222 Believe me I understand. And of course every job takes longer now because I set a tool down then forget where I placed it. Then there is always, "why did I come down to the basement or to the shop." So far after a minute or two I do remember why. LOL
@@boblor2484 When I forget what I went to the garage for, I usually go back to where I was before I went to the garage. Most of the time, I'll remember right away.
Yes I enjoyed the video and I watched it all the way to the end I’m a locksmith by trade as you was going through those things I know exactly what they were. Lol 😂
LOVE these types of video's, Lyle! Just a helpful tip: I no longer buy Duracell batteries as they leak. Always. I stick with Energizer brand. Also, scrap prices are UP! :) Donate the bike to goodwill. I saw a 35mm small developer film tank...oh the memories! A great Sunday morning video to enjoy with a coffee!
Yes, I have seen a lot of fairly new Duracell’s leaking. But I have also seen energizers leaking in the package at the store shelf. They all seem to lake now
Great video. About 30 years ago, my wife and I owned an antique store. We went to an auction out in the boonies, where there two tables each made from a sheet of plywood, covered in small items. There were tools, ceramics, vintage toys, bottles and similar things. They tried to auction it all one item at a time, the 5 at a time, and there was little interest. My wife bought the whole lot for $50. I sold two 6&1/2 oz Coke bottles for a dollar each before we had it all packed. My wife keeps careful records and she calculates that over the next 20 years that we were in business, she's up about a grand on her $50 investment.
Its fun to treasure hunt... The hex bar with the "tap" in the end is a star drill. Before hammer drill wed used them to make holes in stone or concrete to mount items. Very popular with electricians and such to fix boxes and hangars. That was a nice one because the drill part was replaceable. They also made a very nice rubber handgrip to go over the hex bar.
I watched it all (was that a song?). Heard you say "40/60" solder (probably meant 60/40), 40/60 is for stained glass, 50/50 for radiators, 60/40 is electrical. All of these solders have a "paste phase" between solid and liquid (have to be careful you don't wiggle it or it will be frosty looking when it cools). 63/37 alloy goes from solid to liquid to solid with no paste and solidifies quickly. I just learned that:) The new lead free solders have much higher temps and are mostly tin 90-95%. The goal was to remove lead from plumbing and food sources, but of course they are trying to remove it from electronics even. There's nothing like more heat on components and traces as if my soldering wasn't bad enough already.
24.58 Those Fiskar scissors are for dressmaking, the blade sits very flat to the table so that fabric can be cut very accurately. They also have a cushioned grip and are spring action so it’s not to hard on the fingers for prolonged cutting out. Any sewing friend of yours would be very grateful to receive those and try them out.
Goodwill in California doesn't take tools; I once got a nice table saw and other tools from an elderly couple that was trying to donate them, but they'd been rejected. I just happened to hear them talking about it and offered to take the items- they were thrilled because they would have had to load them up again and take them home. That guy sure loved gimmicky tools! So much of that pile I'd toss too. The iron threaded items are ferrite tuning slugs for old TVs, radios, etc. Globemaster made cheap tools, but I have a set of their box wrenches that I've had since I was a kid, and they get used all the time. Very fun to watch!
Reminds me of end of the auction ‘Table Lots’ which sold cheap and provided hours of entertainment sorting through it all. Since I don’t have ANY space left in my shop I can now hoard vicariously through your videos - thanks! ;)
I was a locksmith and I never had much luck with a pick gun and the electric ones are just too high in price. The lock tools are used on different kinds of locks. Then I first started out an old Locksmith gave me a big box of paddle locks to work on. LOL I think he just wanted to get rid of them.
Hello my friend. My dad was like you, and when he passed his 5 children went through his stuff and took what we needed. Then we threw the rest in a dumpster. The dumpster received about 80% of his findings. I hope your family is ready for that.
I'm fond of the quality multi-tools like Leatherman. In fact, I dropped mine, at a factory that I worked at, and it was accidentally ran over with a large sweeping machine. It was damaged pretty badly, so I wrote the company and honestly explained what happened. They decided it was beyond economical repair so they gave me a brand new Leatherman, extended my warranty, and threw in a keychain ALL FOR FREE!
Mr Pete I sure hope there is somebody as gracious as you to take somebodies life of goodies and show you the same care when it becomes time to dispense your life long excellence in fine tool collecting.
I love this kind of video, this week i had a chance to go through the workshop of a friend who had recently deceased, the family were just going to skip everything (except one of them, who i met up with, I filled 4 similar sized boxes, mostly with materiels as he was an engineer, there was also a complete raw of brass rod and tube in various sizes, after sorting I ended up with about 75 lbs of brass, a similar quantity of steel, aluminium and nylon stock, a bench sized fly press, a sheet metal rolling machine, a home made (by my friend) mill vice some other home made engineering tools and a handful of other tools that I didnt have . I left several times what I took, including a little john lathe, and an old mill (bench top size, but I didnt have anywhere to put them, so had to leave them) it took me several days to sort into piles too, basically I only picked what I knew I would use, and still came away with 4 boxes.
I would love to see a video on locks. They are very intriguing as puzzles. BTW, states vary in laws on picks. In PA they're not illegal unless used in a crime, same as a hammer or prybar. There are actually Locksport organizations that have contests.
I know a locksmith who has an apprentice that would love to get his hands on some of those lock picks! I really like seeing colllections of tools like this. Gives a person a glimpse into the life of a craftsman. You can tell a lot about a person by looking at his tools, right? Love all of your videos!
@@awhtjio his videos are kind of weak. Good for mass appeal, but not really good for people technically minded, who want to see how things work. He makes a 2 min 40 sec video of him briefly describing it, he picks it, and ends the video. Like he only has a 2 GB memory card. Gahbage.
"Iron core" might be for winding coils for electronics. With the later timer and ra-loc stuff, and the keys and locks, I think the previous owner might have been into security systems and alarms.
I watched the entire 2 part video and really enjoyed it! Each box contained surprises, some worthwhile items, and I found myself watching intently as each new discovery was made, Very entertaining video, held my attention throughout! Great job!
@@BedsitBob no Adam is awesome. Kieth Rucker is a frigging hack that has no business making videos he is setting a bad example. Adam is completely the opposite. Open your eyes buddy. I'd just delete your comment if I were you
These videos are interesting. It was amazing how many tools there were still in their original packaging. The jokes you make are the best part though 😂
I’ve had similar piles before or bought a storage unit full of junk for a few things I wanted. A lot of time is involved. Your video; It’s entertaining, partly because of your commentary and also the curiosity. Keep on junking and we’ll keep rooting for those gems you find!
12:35 hexagonal thing with a slot and a tip, I have a set of something similar to these from the 1920's,. I remember father using them before hammer drills were common. My 'handyman' set was made by Rawlplug in the UK. It consists of 1 hex bar, 1 wedge to fit the slot and several paper packets of different sized 'drill bits'. To put a screw into stone orbrick you made the hole with the appropriate drill bit in the hex bar which you then hit the end with a big hammer while rotating the whole lot by hand. Once your fingers came out of plaster you tapped a Rawlplug fibre plug into the hole and you could then screw into it and it would hold pretty well. Put the wedge into the slot to drive out the drill bit
Some of that stuff would be useful to a young person just getting started in life. That item you said might be a metal detector might be some kind of Geiger counter as there was an atom shown on the box.
@@mrpete222 ....in fact it may have radioactive parts! Just check. That is old analog construction and being slightly hot may not have meant as much as it does now. Radioactive dials etc..
Fun video that has really nice stuff and across the pond junk. The ball handled screwdriver is actually great for tough fasteners. I bought one probably 25/30 years ago and still have it. Really nice for old hands to get a grip on hard to break loose fasteners. At now almost 71 I have used it with quality bit inserts to get things done that were tough or not possible with quality screwdrivers due to leverage you can apply. As you say I beat that to death. Thanks for all you do in your videos. I have learned a lot of machining techniques from you and enjoyed it and your sense of humor.
Have you priced solder lately????? OMG. I should have purchased futures in solder instead of gold or silver. The solder might by the real gem in that one box!
I almost fainted when I saw all the tools with the batteries still inside. A Leatherman multitool will always get you out of a bind surprisingly close to home. Next time, take the gasoline out of that leaf blower and leave everything inside it with a generous film of motor oil, you're welcome.
Youi seemed to be overly harsh on someones' collection, many of those tools we all began with befo9re we could upgrade. Don't be hard on other brands which may not be popular but will often get the job done. Just because you don't know what a French Curve or Square nails are does not mean that they are junk. It does not have to be an overpriced tool to be functional. You seem blinded by trade names. Yes, people DO use wood screws. Many professionals do not need the over priced high end brands. Sort them and make up several tool boxes and offer them to schools for those in trades training. Brass has good scrap value. China makes things you can no longer get in North America. Sad but True. Many DIY would love to have many items.
Yes I enjoyed it but the problem was I could shout, "stop, I know what that is...." You are correct, Xcelite tools were primarily electronic tools, my Dad was a raid and TV repairman since 1947 (passed away at the age of 90 and still working in his shop) and he had a lifelong love affair with their line of tools. That Fiskers scissors are FANTASTIC, I have a pair and although Fiskers shows them on their website they are no longer available. I use them in my woodworking shop and they work great for cutting paper, box board, and other material. Two of those, "what is it pliers" are for crimping coax cable ends, one is worthless as it is junk but the other one looked like a good set that would do a great job. You ignored a "Volt Pen" in one box, it is the black device with a white end. It is used by electricians to determine if a wire is hot. It works without making contact with the wire itself. But it look like the white cap was off and more than likely the battery had leaked all over inside of it, and when that happens all the magic is gone. Enough, my comment is too long, but if you are still reading this was a GREAT video.
The blue handle crimp tool is for tv coax connectors, old style for RG 59 and a larger cable. I have one just like it. The Moody Tool set brought back memories, I always wanted that set as a kid. Never had the money, too expensive back then. I have a complete set of the Xcelite tools in the old red roll case. Some good stuff there, and much is worthless. Take care, stay safe, and keep posting.
I love this video. I have so many of the same things in my Gun Shop. I have many things from Brownells. Got to know Bob Brownell real well. Many phone calls. His son & grandson now run it. Old Dave
You had fun with this junk. There were a few nice items. It seems like whenever the guy needed a tool, he just bought a new one. I watched the whole thing and made me think about cleaning out my own hoard.
I like these videos very much. I also have many tools. A worked for a friend on and off over the years in his scrap metal and antique car and truck wrecking yard business that he has been running since 1953 that he started at 11 years old and still runs today. He has a house he lives in at the business and is like going into a museum. It was the best most fun job one could have. We would get jobs cleaning up property, old buildings and old houses. His place is like Dizzyland for people that like old stuff. Same guy who got the Corvette lead plate ad.
Pete in episode, you showed a pair of pliers with curved jaws and foam pads inside them. It finally came to me what they were for. If you had a multi-pin connector, this pair of pliers was used to turn the lock ring on the outside of the connector body without damaging the ring.
I watched both parts of this video beginning to end and enjoyed them. I've been thru this type of thing twice, Father and Father in law, we boxed it up and hauled to be sorted in the comforts of my home. I pretty much knew what Father had but not Father in law. I do appreciate the effort you have to put into this. You would hate to miss something real valuable. You did find some nice items and it made it worth your while. Once again you are very entertaining to listen to. Good luck on your auction hunts!
I can't stop watching once I start. As for the handsaw, I still use them. It would be a shame if that saw didn't find a home with someone who would appreciate it, Diston was top of the line when carpenter's used hand tools. I recently had to do considerable work around my father's property after he passed. He had a few hand tools, saw's, brace and bits, etc. Some of the buildings had no electricity and cutting a board with a cordless drill gets old real fast. Hope that saw found a good home. I always watch your videos to the end all of them. I'm sure I am not the only one who wishes he could spend time in your presence, your experience is something you will take with you when you go. Your love of teaching and sharing through your videos is a wonderful thing, so you will leave quite a legacy. Not that you are going anywhere any time soon. Thank you for being you.
One the ohm meter - only resisters are used with a battery. AC and DC voltage / current (maybe) doesn't use battery even if missing or corroded. Leatherman are good steel and are keepers. Typical multi-tool. Handy for the car tool box or desk. Good quality steel file. Best clean an old than buy new. If you have Xcelite handles that turn white, simply put them into a RF tank and they come out clear and pretty. Those tanks are great for cleaning tools. Solder is also good in brass work.
I liked the video. Interesting to see all the contents. Watched through till the end. Sitting on my front porch enjoying the sun and your video. Be well.
Mr. Pete I like this type of video very much. I watched all an enjoyed it, I hope you have an easy time of getting rid of what you don't want. Thanks for sharing your videos and "stuff".
Hey Mr Mrpete222! I enjoy these treasure hunt combo tool history vids! They are also a source of quality spontaneous rants! Keep them coming please! Ride ride ride!
That driver set you pulled out of the first box with the yellow handle. That looks like an Xcelite 99 driver set and they are field service tools. I have been using them for 20 years. If you are going to give it to Goodwill, I would be willing to take it off your hands for the price of postage if it really is Xcelite. It will say on the handle.
Yes, Please keep these Video's going, looking forward to the "What is This", I have several of these items and have broached my Retired Maint. Mechanic Co-workers to what they are and still NO idea.Additionally I went to a Auction at a John Swett High in Crockett Ca, YEARS ago (35-40 yrs), they were shutting down the Mechanic /Machinist Shop, got a lot of Starrett Combo squares among other things...
I have a newfound respect for Leatherman. They have been American made forever, and the tools they make right now are little wonders of engineering. Thanks for another fun vid.
Liked both videos very much. Interesting old tools. Xcelite screwdrivers, nut drivers are very high quality. Have a set over 50 years old that are used almost daily and are in great shape.
I love these kinds of videos. Thanks. I don't carry a Leatherman, but they do command a decent price if you choose to re-sell it. Not long ago, I came across a pick-up truck full of lower-quality tools which I had to take with some tool boxes I purchased from a man who just wanted it all gone. I sorted out the decent tools then figured I would donate the rest. A friend agreed to take the rest to a local auction in a set of 5 gallon buckets. We got over $300 for the tools, splitting the profits from our plunder of "junk". As you know, the key is to get the junk out of your house as fast as you can. Good luck and thanks again.
👍👍
I had to quit going to estate sales because I concluded I was essentially stocking up for my estate sale.
That’s funny
Good one 👍
I was at an estate sale this week and I said I was looking at my own future.
And your problem is ? 🤣🤣
@@stevewilliams2498 INDEED
I never leave the house without my leatherman
Lock picking is a hobby that has a pretty decent following. I learned a little bit about it.
Yes
Watched till the very end. I always enjoy your videos and the Mr. Peteism running commentary. Thank you.
Thanks
Wifes name and pic. Mark here. The Specialzed bike im guessing you can sell $200++ or give to a son or grandson; don't be sorry you got it. I can imagine so many others like me seeing various tools, gadgets in your score, saying "hey I want that" but dang I live in Ca. So yes I'm still watching. Your idea to throw the crap foreign tools aside without saying anything is good, speeds things along. Put junk tools out at curb in a box marked Free. You rock Mr Pete.
Leatherman makes a good product I have been using them for nearly 2 decades. They are still made in USA and offer a 25 year unconditional warranty.
Thanks
Those also looked like the "mini" version, which had an extension in the handle that folded out to make them full size. But being the old ones the handles were not real comfortable.
@@sithus1966 Definitely the mini tool. Those are a bit less commonly found.
I was given a Leatherman about 15 years ago, but the screwdriver blade wasn't tempered properly and it broke. So I _rarely_ use it for anything because I don't trust it, even though I had always heard that they were top notch. Since it was a gift, I don't have any "proof of purchase," so I don't know whether it's worth fooling with the warranty system?
I carry the Leatherman Wave on me all the time. Have used it a number of times.
I stayed to the end. The smoking compressor was a nice touch. i do enjoy these videos. One man's treasure is another man's junk.
lol
The compressor could have been saved with a little caution when starting up something like that compressor. You can tell by the sound when the start windings don't open, and can shut it off before it was smoke signaling for help. Little cleanup of the start switch or 'govener" and you would be good to go. I know its not a high high quality device, but just to burn it up don't set well with the tite-wad in me..
The brutal honesty in this video had me laughing the whole way through 😂
lol. Would you believe, sometimes I look at my older auction videos and crack myself up
A good friend back in 1953 went on a tour of the local newspaper. A employee there give him the lead plate that was used for a ad on the new 1953 Corvette. He still has the lead plate.
👍👍
Yep, now finding places for all the new stuff, and then if you are like me (72 yrs old) remembering where you put the stuff. It was enjoyable watching you sort through the "stuff".
I already lost the Moody tools. My good friend wanted me to give them to him. But I cannot find them. There is the possibility I threw them out
@@mrpete222 Believe me I understand. And of course every job takes longer now because I set a tool down then forget where I placed it. Then there is always, "why did I come down to the basement or to the shop." So far after a minute or two I do remember why. LOL
@@boblor2484
When I forget what I went to the garage for, I usually go back to where I was before I went to the garage. Most of the time, I'll remember right away.
Since finding you on RUclips I watch them all and I'm working my way through all the old ones, do especially like your comments. 👍👍
Thank you, I have a bout 1300 videos for you to watch
Yes I enjoyed the video and I watched it all the way to the end I’m a locksmith by trade as you was going through those things I know exactly what they were. Lol 😂
Mr Pete,
I'll watch any video you make and enjoy it.
Thanks.
2:25 Those Moody Micro Tools are USA made and very nice quality. If you do small delicate work they are definitely a keeper.
Always enjoy your videos because you are in them.
Thanks
"Free tools" my two favourite words together
The red plastic container that said iron cores are used in television repair back in the day to do convergent alignments.
LOVE these types of video's, Lyle! Just a helpful tip: I no longer buy Duracell batteries as they leak. Always. I stick with Energizer brand. Also, scrap prices are UP! :) Donate the bike to goodwill. I saw a 35mm small developer film tank...oh the memories! A great Sunday morning video to enjoy with a coffee!
Yes, I have seen a lot of fairly new Duracell’s leaking. But I have also seen energizers leaking in the package at the store shelf. They all seem to lake now
Great video. About 30 years ago, my wife and I owned an antique store. We went to an auction out in the boonies, where there two tables each made from a sheet of plywood, covered in small items. There were tools, ceramics, vintage toys, bottles and similar things. They tried to auction it all one item at a time, the 5 at a time, and there was little interest. My wife bought the whole lot for $50. I sold two 6&1/2 oz Coke bottles for a dollar each before we had it all packed. My wife keeps careful records and she calculates that over the next 20 years that we were in business, she's up about a grand on her $50 investment.
👍👍
Its fun to treasure hunt...
The hex bar with the "tap" in the end is a star drill. Before hammer drill wed used them to make holes in stone or concrete to mount items. Very popular with electricians and such to fix boxes and hangars. That was a nice one because the drill part was replaceable. They also made a very nice rubber handgrip to go over the hex bar.
Thanks
We call them rawl plug jumper in the uk.
I watched it all (was that a song?). Heard you say "40/60" solder (probably meant 60/40), 40/60 is for stained glass, 50/50 for radiators, 60/40 is electrical. All of these solders have a "paste phase" between solid and liquid (have to be careful you don't wiggle it or it will be frosty looking when it cools). 63/37 alloy goes from solid to liquid to solid with no paste and solidifies quickly. I just learned that:) The new lead free solders have much higher temps and are mostly tin 90-95%. The goal was to remove lead from plumbing and food sources, but of course they are trying to remove it from electronics even. There's nothing like more heat on components and traces as if my soldering wasn't bad enough already.
👍👍
Thanks Mr Pete - the possibility of finding a treasure among the junk is always fun.
The draughting compass at 22:07 is quick adjustable. Press the paddles on the legs to release the half-nuts from the screw part. Very handy.
Thank you, I will try that
24.58 Those Fiskar scissors are for dressmaking, the blade sits very flat to the table so that fabric can be cut very accurately. They also have a cushioned grip and are spring action so it’s not to hard on the fingers for prolonged cutting out. Any sewing friend of yours would be very grateful to receive those and try them out.
Goodwill in California doesn't take tools; I once got a nice table saw and other tools from an elderly couple that was trying to donate them, but they'd been rejected. I just happened to hear them talking about it and offered to take the items- they were thrilled because they would have had to load them up again and take them home. That guy sure loved gimmicky tools! So much of that pile I'd toss too. The iron threaded items are ferrite tuning slugs for old TVs, radios, etc. Globemaster made cheap tools, but I have a set of their box wrenches that I've had since I was a kid, and they get used all the time. Very fun to watch!
Reminds me of end of the auction ‘Table Lots’ which sold cheap and provided hours of entertainment sorting through it all. Since I don’t have ANY space left in my shop I can now hoard vicariously through your videos - thanks! ;)
lol
I love all of your videos, and I always watch your videos all the way through! Lyle Peterson is an American folk hero!!!!!!!!!!!!
Thank you very much
The small punches in the pale blue box may have been 'Moore and Wright', (M&W).
They were, Sheffield, UK, made quality.
@@johnland7318 Thought so, I have a few treasured items from my grandfather which saw me through my apprenticeship from M&W.
I was a locksmith and I never had much luck with a pick gun and the electric ones are just too high in price. The lock tools are used on different kinds of locks. Then I first started out an old Locksmith gave me a big box of paddle locks to work on. LOL I think he just wanted to get rid of them.
👍👍
I watched the whole video. I always enjoy these. Looking forward to the "What is It" as I think I recognized one or two of the unknowns.
Hello my friend. My dad was like you, and when he passed his 5 children went through his stuff and took what we needed. Then we threw the rest in a dumpster. The dumpster received about 80% of his findings. I hope your family is ready for that.
I'm fond of the quality multi-tools like Leatherman. In fact, I dropped mine, at a factory that I worked at, and it was accidentally ran over with a large sweeping machine. It was damaged pretty badly, so I wrote the company and honestly explained what happened. They decided it was beyond economical repair so they gave me a brand new Leatherman, extended my warranty, and threw in a keychain ALL FOR FREE!
👍👍
They just did one of the best ways of advertising along with customer service. 👍
Mr Pete I sure hope there is somebody as gracious as you to take somebodies life of goodies and show you the same care when it becomes time to dispense your life long excellence in fine tool collecting.
Yes
I love this kind of video, this week i had a chance to go through the workshop of a friend who had recently deceased, the family were just going to skip everything (except one of them, who i met up with, I filled 4 similar sized boxes, mostly with materiels as he was an engineer, there was also a complete raw of brass rod and tube in various sizes, after sorting I ended up with about 75 lbs of brass, a similar quantity of steel, aluminium and nylon stock, a bench sized fly press, a sheet metal rolling machine, a home made (by my friend) mill vice some other home made engineering tools and a handful of other tools that I didnt have . I left several times what I took, including a little john lathe, and an old mill (bench top size, but I didnt have anywhere to put them, so had to leave them) it took me several days to sort into piles too, basically I only picked what I knew I would use, and still came away with 4 boxes.
That sounds interesting. Wish you had filmed it
Nice walk through our past! Lots of forgotten memories!
I would love to see a video on locks. They are very intriguing as puzzles. BTW, states vary in laws on picks. In PA they're not illegal unless used in a crime, same as a hammer or prybar. There are actually Locksport organizations that have contests.
I know a locksmith who has an apprentice that would love to get his hands on some of those lock picks! I really like seeing colllections of tools like this. Gives a person a glimpse into the life of a craftsman. You can tell a lot about a person by looking at his tools, right? Love all of your videos!
lock picking lawyer has all the content you desire
@@awhtjio his videos are kind of weak. Good for mass appeal, but not really good for people technically minded, who want to see how things work. He makes a 2 min 40 sec video of him briefly describing it, he picks it, and ends the video. Like he only has a 2 GB memory card. Gahbage.
I watched every minute of both videos, someone says free tools, and you have my attention!!!! Thanks Mr Pete!!!!
😀👍👍
"Iron core" might be for winding coils for electronics. With the later timer and ra-loc stuff, and the keys and locks, I think the previous owner might have been into security systems and alarms.
Yeah, or used as adjustment core in coils
I watched the entire 2 part video and really enjoyed it! Each box contained surprises, some worthwhile items, and I found myself watching intently as each new discovery was made, Very entertaining video, held my attention throughout! Great job!
Glad you enjoyed!
For all those rusty tools, you need a big container, filled with Evapo-Rust.
Keith Rucker is a hack
@@jacobpoucher Is Adam Booth also a hack?
@@BedsitBob no Adam is awesome. Kieth Rucker is a frigging hack that has no business making videos he is setting a bad example. Adam is completely the opposite. Open your eyes buddy. I'd just delete your comment if I were you
Realistically you need a dumpster!
Just my opinion.
JIM
That was a blast and brought back some fun memories! The main score Beverly!!! assuming that was part of the haul! Thanks for the fun!!!
It was not part of the hall. Several videos for that are in the can
These videos are interesting. It was amazing how many tools there were still in their original packaging. The jokes you make are the best part though 😂
Thanks
I’ve had similar piles before or bought a storage unit full of junk for a few things I wanted. A lot of time is involved. Your video; It’s entertaining, partly because of your commentary and also the curiosity. Keep on junking and we’ll keep rooting for those gems you find!
Thanks
"hemostat, for smokin dope" had me laughing
Never smoke a bit of dope with mine.
Yeah, definitely one for the old Tubalcain highlight reel...
And how might he know that????
@@TheJeffersm He was a high school teacher, he knows a dopers tools.
@@cojones8518 what do you do with it then?
I enjoyed both videos; I like going to flea markets looking through all the boxes of rusty stuff
7:28 appears to be a wheel weight tool, for installing and removing wheel weights on vehicles.
Yeah. Im thinking the same thing
Loved this, thanks again, Mr Pete! And yep, watched it all.
Leatherman is quality stuff.
Fabulous, Mr. Pete! I, for one, am very happy to see you going back to the auctions. Keep up the great work.
Thanks
Mr. Pete that’s a good leatherman tool. It’s not the best to use but it’s discontinued and pretty collectible.
Leatherman Wave is the best £100 I've spent on tools in over thirty years.
12:35 hexagonal thing with a slot and a tip, I have a set of something similar to these from the 1920's,. I remember father using them before hammer drills were common. My 'handyman' set was made by Rawlplug in the UK. It consists of 1 hex bar, 1 wedge to fit the slot and several paper packets of different sized 'drill bits'. To put a screw into stone orbrick you made the hole with the appropriate drill bit in the hex bar which you then hit the end with a big hammer while rotating the whole lot by hand. Once your fingers came out of plaster you tapped a Rawlplug fibre plug into the hole and you could then screw into it and it would hold pretty well. Put the wedge into the slot to drive out the drill bit
Some of that stuff would be useful to a young person just getting started in life. That item you said might be a metal detector might be some kind of Geiger counter as there was an atom shown on the box.
Thanks
@@mrpete222 ....in fact it may have radioactive parts! Just check. That is old analog construction and being slightly hot may not have meant as much as it does now. Radioactive dials etc..
Fun video that has really nice stuff and across the pond junk. The ball handled screwdriver is actually great for tough fasteners. I bought one probably 25/30 years ago and still have it. Really nice for old hands to get a grip on hard to break loose fasteners. At now almost 71 I have used it with quality bit inserts to get things done that were tough or not possible with quality screwdrivers due to leverage you can apply. As you say I beat that to death. Thanks for all you do in your videos. I have learned a lot of machining techniques from you and enjoyed it and your sense of humor.
👍
Have you priced solder lately????? OMG. I should have purchased futures in solder instead of gold or silver. The solder might by the real gem in that one box!
I have priced it two days ago. It was over $30 per roll. And it doesn’t have lead in it anymore
@@mrpete222 You looked in the wrong spot. You can still get Kester 60/40 solder, even Amazon have it.
I almost fainted when I saw all the tools with the batteries still inside. A Leatherman multitool will always get you out of a bind surprisingly close to home. Next time, take the gasoline out of that leaf blower and leave everything inside it with a generous film of motor oil, you're welcome.
Too late, the leaf blower is in the landfill
"More lockpicks...he must have had larceny on his mind."
*Sad Lockpicking Lawyer noises
He should box all the "larceny" bits up and send them to LPL or BosnianBill
Yes liked 👍 video
Also I like Leatherman for camping and hunting does alot in a pinch
Be well have fun
Give them Hemostats to Jordan!!!
I have a use for them as well
@@51-FS I already got a lifetime supply !
The cone papers have replaced the need for them...
@@51-FS I don't use those much I'm old school
They are awesome....
It was fun watching you dig in all those boxes. And yes I watched the whole thing.
👍
Youi seemed to be overly harsh on someones' collection, many of those tools we all began with befo9re we could upgrade. Don't be hard on other brands which may not be popular but will often get the job done. Just because you don't know what a French Curve or Square nails are does not mean that they are junk. It does not have to be an overpriced tool to be functional. You seem blinded by trade names. Yes, people DO use wood screws. Many professionals do not need the over priced high end brands.
Sort them and make up several tool boxes and offer them to schools for those in trades training. Brass has good scrap value. China makes things you can no longer get in North America. Sad but True. Many DIY would love to have many items.
Spot on!
You okay, man? Tissue?
Watching till the end, I’m a sucker for surprise boxes.
lol
I totally dig this type of video Mr Pete. I totally switch off from the world and feel like I'm right there with you.
Thanks
I liked it my metal shop teacher was Mr. Dominic Arvada Co. Great guy really learned a lot. Your videos are great. Love the funny comments .
👍👍
Yes I enjoyed it but the problem was I could shout, "stop, I know what that is...." You are correct, Xcelite tools were primarily electronic tools, my Dad was a raid and TV repairman since 1947 (passed away at the age of 90 and still working in his shop) and he had a lifelong love affair with their line of tools. That Fiskers scissors are FANTASTIC, I have a pair and although Fiskers shows them on their website they are no longer available. I use them in my woodworking shop and they work great for cutting paper, box board, and other material. Two of those, "what is it pliers" are for crimping coax cable ends, one is worthless as it is junk but the other one looked like a good set that would do a great job. You ignored a "Volt Pen" in one box, it is the black device with a white end. It is used by electricians to determine if a wire is hot. It works without making contact with the wire itself. But it look like the white cap was off and more than likely the battery had leaked all over inside of it, and when that happens all the magic is gone. Enough, my comment is too long, but if you are still reading this was a GREAT video.
Thanks
Hi, I do enjoy your videos all of them, I carry a leatherman multi tool on my work belt and use it nearly every day. Thanks, John
The blue handle crimp tool is for tv coax connectors, old style for RG 59 and a larger cable. I have one just like it. The Moody Tool set brought back memories, I always wanted that set as a kid. Never had the money, too expensive back then. I have a complete set of the Xcelite tools in the old red roll case. Some good stuff there, and much is worthless. Take care, stay safe, and keep posting.
I love this video. I have so many of the same things in my Gun Shop. I have many things from Brownells. Got to know Bob Brownell real well. Many phone calls. His son & grandson now run it. Old Dave
I would love to visit the brownells Store. I love their catalog
The What Is It at 16:34 - it’s the type of crimper used for putting terminals on coaxial cables, such as TV feeds.
You had fun with this junk. There were a few nice items. It seems like whenever the guy needed a tool, he just bought a new one. I watched the whole thing and made me think about cleaning out my own hoard.
Yes
I like these videos very much. I also have many tools. A worked for a friend on and off over the years in his scrap metal and antique car and truck wrecking yard business that he has been running since 1953 that he started at 11 years old and still runs today. He has a house he lives in at the business and is like going into a museum. It was the best most fun job one could have. We would get jobs cleaning up property, old buildings and old houses. His place is like Dizzyland for people that like old stuff. Same guy who got the Corvette lead plate ad.
👍👍😀😀
Pete in episode, you showed a pair of pliers with curved jaws and foam pads inside them. It finally came to me what they were for. If you had a multi-pin connector, this pair of pliers was used to turn the lock ring on the outside of the connector body without damaging the ring.
👍
WOW I love these kinds of videos. Thanks. Ed Loretto Ontario Canada
Great action Mr. Pete real enjoyed the show ! sweet to see the old Sears & Craftsman tools.
👍
I watched both parts of this video beginning to end and enjoyed them. I've been thru this type of thing twice, Father and Father in law, we boxed it up and hauled to be sorted in the comforts of my home. I pretty much knew what Father had but not Father in law. I do appreciate the effort you have to put into this. You would hate to miss something real valuable. You did find some nice items and it made it worth your while. Once again you are very entertaining to listen to. Good luck on your auction hunts!
Thank you very much, I am glad you like those type of video
I can't stop watching once I start. As for the handsaw, I still use them. It would be a shame if that saw didn't find a home with someone who would appreciate it, Diston was top of the line when carpenter's used hand tools. I recently had to do considerable work around my father's property after he passed. He had a few hand tools, saw's, brace and bits, etc. Some of the buildings had no electricity and cutting a board with a cordless drill gets old real fast. Hope that saw found a good home.
I always watch your videos to the end all of them. I'm sure I am not the only one who wishes he could spend time in your presence, your experience is something you will take with you when you go. Your love of teaching and sharing through your videos is a wonderful thing, so you will leave quite a legacy. Not that you are going anywhere any time soon. Thank you for being you.
👍👍
One the ohm meter - only resisters are used with a battery. AC and DC voltage / current (maybe) doesn't use battery even if missing or corroded. Leatherman are good steel and are keepers. Typical multi-tool. Handy for the car tool box or desk. Good quality steel file. Best clean an old than buy new. If you have Xcelite handles that turn white, simply put them into a RF tank and they come out clear and pretty. Those tanks are great for cleaning tools. Solder is also good in brass work.
Thanks
Great videos!! Laughed more than I have in a long time. Thanks.
lol
That small bag of spring steel was of the perfect size to make and use for Lock Picking Tension tools.
I liked the video. Interesting to see all the contents. Watched through till the end. Sitting on my front porch enjoying the sun and your video. Be well.
👍👍👍
I like these type of videos, you commentary is the best. Thank you!
👍👍👍
Mr. Pete I like this type of video very much. I watched all an enjoyed it, I hope you have an
easy time of getting rid of what you don't want. Thanks for sharing your videos and "stuff".
👍👍
Hey Mr Mrpete222! I enjoy these treasure hunt combo tool history vids! They are also a source of quality spontaneous rants! Keep them coming please! Ride ride ride!
Thanks
I like this kind of video - especially your commentary. Thanks.
Thanks
Thanks Mr Pete , my grandfather gave me a Disston saw and I still have it . Brings back good memories working with my grandfather.
We watched the whole thing. My wife loves these unboxing videos.
Thanks
Watched both part 1 and part 2 from beginning to end and loved every minute of both.
👍👍
That driver set you pulled out of the first box with the yellow handle. That looks like an Xcelite 99 driver set and they are field service tools. I have been using them for 20 years. If you are going to give it to Goodwill, I would be willing to take it off your hands for the price of postage if it really is Xcelite. It will say on the handle.
Yes, Please keep these Video's going, looking forward to the "What is This", I have several of these items and have broached my Retired Maint. Mechanic Co-workers to what they are and still NO idea.Additionally I went to a Auction at a John Swett High in Crockett Ca, YEARS ago (35-40 yrs), they were shutting down the Mechanic /Machinist Shop, got a lot of Starrett Combo squares among other things...
I enjoy these videos very much. Now you have to sort out all this stuff.
I have a newfound respect for Leatherman. They have been American made forever, and the tools they make right now are little wonders of engineering. Thanks for another fun vid.
You have a lot of elements in your shop so lovely 👍👍👍😍
The smell of the X-lite screwdrivers and nut drivers is from the cellulose acetate plastic used in the handles.
And it’s horrible
I love these kind of videos. I like the auction ones as well. But i enjoy all your videos.You do excellent work. Thak you!!!
Thank you very much
Love it ! Love it! Your sarcasm makes it very entertaining.
lol
Liked both videos very much. Interesting old tools. Xcelite screwdrivers, nut drivers are very high quality. Have a set over 50 years old that are used almost daily and are in great shape.
👍👍
Fun video, thanks for sharing your haul.
Yes enjoyed seeing you rummage through trash and treasure.
Mr. Pete, You maybe old, but you are not incompetent. I am a big fan of your videos and I admire your competence always!
Thanks
I like these surprise box videos. They have a bit of Christmas morning excitement about them.