Just use with a nice upscaler/deinterlacer or something. This chip is just a hdmi converter without any of those capabilites hence why he got all the bouncing without going into progressive mode (very few PS2 games have this mode). Its also how they can claim zero latency (its not doing anything really)
This is kinda awesome. Sure, the console specific digital to digital high-end solutions are great, but It's nice to see a decent budget option that is relatively easy to install as well.
I saw that chip noticeably move when you plugged the HDMI cable into the port in the last shot. You're not kidding when you said that mounting it was a con. XD
Those guys are snakes. I got a first gen hdmi mod chip with the wrong firmware flash to it. When I asked for a replacement they absolutely denied flashing it with the wrong firmware. I get static out of the hdmi connector for audio.
It's an "easy" soldering job, because it's soldered on through-hole component with large separated pads and not on surface mounted components with really close legs. As long as you have flux and an iron, it shouldn't be that hard.
Why don't you just man up and admit you don't know how to solder instead of trying to debate the meaning of the word "easy"? Like any skill, it always becomes easier with practice.
These intros with rotating consoles and pieces, I love them! One can easily figure out how you do it, but it's so well executed it looks almost magical
@DarkSerge34 True, however I'm trying to convert as many of my retro consoles from analog to HDMI as cheaply and as quickly as possible. For the price with its flexibility, I've already ordered several for different consoles and projects. Converting old Mini-HDMI analog projects I've already completed for example to give them a full-size port is a dream come true.
Great review! I do think you should've reiterated briefly on the interlaced jitter issue, as that can be jarring for some, but I acknowledge that you did already go over it just before. Just nice to have it in the Cons section for those who skip around so they don't forget what they're getting.
The amount of visible movement in that PCB when you plug in the HDMI cable shows the design really needs an extra pair of mounting screws for stability.
Great video, I used the same adapter on my Clear Blue Phat PS2. Removed the optical out and mounted a micro hdmi instead of cutting the case. For the price and ease of install this is a great option that provides good video output. Installed one in my crystal Xbox as well after my xboxhdmi stopped outputting video on me.
it really has no reason to exist though. It adds the complexity of an internal mod but only provides analog-to-digital functionality which has already been available as cheaper external solutions for a long time. This is basically the worst kind of video connectivity solution. If you only want an HDMI connector, just buy a cheaper PlayStation to HDMI adapter which literally is the same thing and doesn't require any modification (plus can be easily switched between consoles). If you want to do an internal mod, save your lunch money and buy a true digital-to-digital HDMI mod kit for the best possible video output and more features.
@@kalmtraveler This is a general purpose mod, I'm sure for some console scenes it will be one of the best options available when it comes to an internal mod. Plus, it's somewhat of a simpler mod since you'll probably solder to easier points (output connectors rather than e.g. GPU pins). Finally, it can be a cool project for someone who likes this kind of tinkering but is doing this to a console that either doesn't have a dedicated digital-to-digital mod available, or is simply not their favorite console ever so they don't necessarily care that much about getting 100% quality. Also the price differential can get more substantial depending on the exchange rates the person is dealing with (for those of us in other countries), though in this specific case the shipping cost makes this point moot. As stated, I simply think it's neat to have an in-between solution available and I'm sure each person can decide on their own if it makes sense for their setup or DIY project!
@@ViewtifulSam I understand as stated. Just saying that this doesn't offer anything new. People have been internally wiring external component-to-HDMI adapters for quite a while, and you can find some of those for lower cost than this kit. I'm not saying that you shouldn't tinker if you just want to tinker, rather that from a value or quality proposition this specific kit does not bring anything new and could be swapped for better options.
Nice vid. Hadn't considered going internal with it myself. The Analog2HDMI board is great! I rigged one up a few years back in an empty SNES cart with Component jacks and a micro USB port for 5v power. Been using it with my Xbox, PS2, and Wii since. Once you start playing the interlacing jaggies are less annoying - to me at least.
This really feels like an internal, more generic version of the external adapters Electron Shepard is already selling for the OG Xbox, Wii and PS2 (tho the PS2 one requires an additional USB-C powerbrick). I guess it's a pretty good option for those who do not want something sticking out their console, want a simple HDMI solution on the Dreamcast or don't want to deal with an extra power adapter for the PS2...
One of the best channels on RUclips! I can see this channel reach 5M easily! Just keep on it, and don't stop! Wish you the best fam! A fan from Saudi Arabia 🖐️🔥✅
Definitely going to pick one up for my Dreamcast, and maybe some of my Gamecubes and N64s too! So great to finally see a more affordable and simple HDMI solution for older consoles.
If you have the earlier model gamecube with the digital video out, the best bet is probably a digital to HDMI as there's no soldering, no opening the case, you just plug it on and it's a pure digital connection. It's what I'm looking at, but from memory they're about $100 Australian to buy and ship it to me. I haven't made the purchase yet, as I'm still looking for my controllers
Using an microSD card adapter as a microSD card slot is actually a pretty clever hack considering they come with pretty much every microSD card. I have like a dozen. But as a slot goes it's bare minimum. I like click-spring action of slots on modern devices.
This is great, as much as I would love to have the fxpixel mod, that price range is out of the question, especially since it’s such a difficult install I would risk possibly breaking the ps2 or the mod itself. Great video!
Probably not, the only reason i see to use this over one of those cheap adapters is the convenience of not having to have that thing stick out the back and then power it with an external cable
You can get a Rad2x and use it to output RGB with line multiplier. Plus you can use it with multiple systems and the same cable can be used with the ps1
@@MachoNachoProductionshi TITO , this is an interesting alternative upscaler mod 😊 hmmm I wonder if "Slipstream GT -mr mods"" uses this or something similar in his custom N64s ??????
I actually like the picture from the ElectronAnalog over the PixelFX. That generation of graphics was still a bit jumpy for my tastes so getting the blur from the digital>analog>digital is actually a blessing. In my honest opinion though you should play PS2 games on a CRT. PS3 and XBOX360 are where I start to move into digital display territory. The only old console I really appreciate HDMI or digital mods is the N64. The PS1's lack of FPU makes their graphics look terrible on anything new. I need those fixed 480 lines to smooth some of it out.
While an internal mod is a cleaner solution, if you're not doing digital to digital it's pretty unnecessary as component to HDMI converters are cheap and abundant and aren't limited to being used with 1 console, and if the system is otherwise stock, I wouldn't want to start with a mod like this. Otherwise, this could be a great mod for cleaning up a retro-setup.
My only other critique would be that, while not quite as small, you could likely achieve the same result with the Wii2HDMI circuit board, save the VGA integration, and last I checked you could get those for $2 a piece depending on where you go.
I like this. Finding a quality Component to HDMI box is always hit or miss unless you want to spend a lot of money on a good scaler. For $20, I think this is a reasonable compromise.
You can (mostly) get away with short runs of analog video over non shielded non coax wires. But you do run the risk of weird analog video artifacts from interference.
7:40 I was wondering if you could explain where you found this statement to be true - i wanted to do this on a 50001 model, but the layout is different, so now i have no idea if the layout is still in the same order left to right wise
I have to ask the question; Why didn't you use the TOSLink for digital audio? If this product has a digital audio option, the TOSlink is right next to the AV port and is present on all PlayStation 2 consoles I have ever seen. It would not only give a perfectly clean audio signal, but offer the option for surround sound too.
A lot of newer devices (TVs) don't have this input, and would require an A/V receiver to take that signal in. A/V receivers are just not as popular anymore either.
Would have loved to see you having four of those and install them to the Dreamcast, GameCube and XBOX as well. This is a soldering mod I'd dare to try myself.
This reminds me of the time Review Tech USA put a cheap composite to HDMI converter into his N64. I'm surprised it took so long for someone to develop a product like this.
@@computercatgaming02 how about a better smaller/external power supply for starters. That thing runs hot 🔥 all the time, not helping the longevity of the OG consoles 💀
@@GrmDark Fair enough, I just have been fine with CFW and increasing the fan curve to the minimum of 35% and it's been very cool compared to stock settings on both of my BC PS3s, CECHC and my CECHB. But yeah the PSU contributes to a lot of the heat, especially on those models
I was gonna ask about latency, since it's going from Digital to analog and bake again. THX for all your awesome videos. I wish I had the skill to do all your mods. I have all my retro machines, but I don't want to mess them up.
Electron Shepard does have a PS2 to HDMI adapter coming out and given that their OG XBox HDMI adapter turned out pretty good I think it'll turn out just as good
This is a neat mod, but does it work properly when you play PS1 games? A lot of the external HDMI-adapters for the PS2 does not work properly when playing PS1 games, so it'd be interesting to know if this works properly when playing PS1 games on the PS2.
I feel like the real target audience for this is game stores and similar console resellers. I feel like if you have the skills to do an internal mod you could save up and do a more advanced one if it's for your personal ultimate console. If you are refurbishing consoles to resell for a profit at scale I can see where this would come into play especially if you're trying to just sell to the general public that just wants a plug-and-play option.
For another "con" not mentioned, I'm assuming this does no scaling. That means the few PS2 games and almost all PS1 games that output native 240p when playing on a PS2 will send the 240p signal through the HDMI port, which may be limited with your TV's signal capability. Is that correct?
It is interesting that this doesn't support RGB video. If it did, you'd be able to use it on SNES, RGB modded N64s, even RGB modded NES consoles. EDIT: Actually this does accept RGB looking at the solder mask. But it's RGB HV. I don't think that'll work as the SNES outputs RGBS? I could be wrong though, I'm not an expert!
@@brandonkickFor $19, I think it's worth trying to use it with RGBS. Just connect the sync line to the H or V. Some RGB-capable devices are intelligent enough to tell if a Csync signal is connected, and this one can seemingly already tell if a signal is YPbPr (Which is sync on Luma, basically a BW composite signal) or RGB. If it doesn't work, just try it in another console (or with S-video since it also supports Y/C)
11:29, I am wondering if you can provide the names for the converter box and the scaler. I have two older consoles - the PS2 Slim, and the Wii, and I would love to play some old games
I'd say that the component is probably having a blur filter applied. At least it looks like it from the pictures. You should try disabling that, I think the custom software has a way to disable that on the PS2. Just bought an external adapter for mine and haven't had time to try it yet.
As much as I love mods like this - and I do - there's always other solutions including not needing to use a dedicated converter box to go Component to HDMI and that's the only thing it does. As much as for Tito something like this is "easy", it still requires intricate micro soldering with steady hands and small cables, where you need to really check you haven't bridged any connections or made dry solder joints. I have an inexpensive all-in-one type game capture box made by AVerMedia - Game Capture HD II C285 I believe. Not only does it record video because it has 2 inputs (Component and HDMI) but only one output (HDMI) it actually does convert Component to HDMI signal, and always correctly without interlace flicker being passed through the HDMI. So I record game footage from most consoles I own (PS2, PS3, PS4, Wii U, all jailbroken/softmodded) and also make the PS2 work even with modern 4K TVs and monitors that have long since done away with legacy inputs. Using an OPL build with GSM on the PS2 allows you to get up to 1080i from the PS2 as well, which can help for recording sharper video. I'd recommend a solution like that to anyone, especially since I paid very little for mine and it even comes with a little remote control to stop/start recording, manage files etc. I wish AVerMedia would make another all-in-one standalone for 4K consoles like the PS4 Pro, Series X etc.
Does it do any scaling, or does it spit out the native 448/480 resolution? Also, I'm curious if it displays in 4:3 or 16:9, since most of your offscreen footage is in widescreen.
That’s awesome! I love your video!! I wonder if you have any video tutorials about how to install $19 hdmi chip to NES (Nintendo Entertainment System console)?
I think I'm going to buy this. The video port on my Phat PS2 was broken when it was given to. So I removed the port completely and install a cheap external hdmi adapter internally. It does work, but the whole install is kind of janky. The picture it outputs isn't that great. This looks like it will give a better picture. Would be cleaner looking to install and I already have an open spot for it.
Hmm. Guess I'll keep hoping for a cheaper digital to digital mod for the PS2, something that isn't too expensive because it doesn't do upscaling and effects and expects us to use a RetroTINK 4K or Morph. Still though, this is cool for people who just want HDMI out without sweating the details, and keeping the price extra low. Definitely has a place in the market.
What about instead of modding inside the console if this can be used for turning a PS2 component cable to an HDMI cable? That way if someone has a spare cable laying around they don't mind splicing, or if they prefer a No-Cut HDMI solution. Just an idea I had.
Maybe I'm just not the target audience for this one, but I feel like I want plug and play convenience from analogue to digital solutions. If we're internally soldering something, I want it to be digital to digital.
i mean.. nothing's stopping someone from wiring the converter to an AV plug instead, and putting it in an enclosure, maybe even call it a PS2HDMI adapter
I'm not sure about this one. It's obviously a good quality product, but if I'm going through the trouble of opening up the console, soldering and modding the case to fit, I might as well get a digital to digital mod to get the best quality, even if it's harder to install. Now, if this had an HDMI plug instead of a port, it could be used to mod an existing AV cable without even touching the console. I think that would be an interesting product. Otherwise, I like my cheap external adapter. It don't mind a small dongle between the console and the HDMI cable.
I thought he would point out why he was doing it to the Ps2 mini build, that ps2 is the 79000 series and pixelfx doesn't support that particular model (an another i think) at that point you could have the ps2 mini or a different ps2 with pixelfx. i was planning to do the ps2 mini build myself with the electron Sheppard prior to this video being released (along with a clear shell wii). im glad this video came out so i can finally get the motivation to finish it 😂😂
“Everything worth doing is worth doing right” it might only be $20 but it’s nice to know at least know was well thought out.
You have one of the nicest satisfying intros on youtube
Thank you so much 🙏
Sometimes I just leave it playing on my Android TV just cause of the music
This even fits the ultra slim?!!? SOLD! I even just today got notified that my MemCard Pro 2 shipped. What a great PS2 day.
so does the retrogem now
Just use with a nice upscaler/deinterlacer or something. This chip is just a hdmi converter without any of those capabilites hence why he got all the bouncing without going into progressive mode (very few PS2 games have this mode). Its also how they can claim zero latency (its not doing anything really)
@@hiRyan329329 If you had an upscaler why would you need an internal hdmi mod?
This is kinda awesome. Sure, the console specific digital to digital high-end solutions are great, but It's nice to see a decent budget option that is relatively easy to install as well.
Hey man, every time I watch your videos I'm blown away by that intro all over again.
Agreed. Its pretty sweet.
The fact this also supports the Xbox and Dreamcast has my ears perk up
If it can support even more systems, this could be huge
it can, it will work on the ps1 using the vga option, and the wii. I've been wondering if it will work for a Vic-20 honestly
Looks like it supports anything that outputs a component or vga signal (or can be modified to do so).
@@dragoncracker How does it work on PS1 and Wii?
@@RiderNexus by connecting to VGA signal, looking around the bitbuilt forums you can find some good examples
Hopefully for the Sega Saturn, 32X add on, Sega Master System
I saw that chip noticeably move when you plugged the HDMI cable into the port in the last shot. You're not kidding when you said that mounting it was a con. XD
As soon as I saw Electron Shepard I knew this would be great. I love their Wii HDMI mod and have done so many.
I said the same thing. I think they’re amazing.
Those guys are snakes. I got a first gen hdmi mod chip with the wrong firmware flash to it. When I asked for a replacement they absolutely denied flashing it with the wrong firmware. I get static out of the hdmi connector for audio.
Yep I use one on my Wii and Xbox. Best company out there!
$19, fantastic. But $35 shipping to EU.. nope.
Give it time, hopefully it'll come down for you.
Bruh...
It's freakin' $10 shipping in the US, even. Fuck 'at.
It's still worth $54 if u want to upgrade to hdmi.
@@androxiloginThat seems very reasonable
"Easy" is always relative when soldering enters the equation
You won't get many easier soldering jobs than this when it comes to modding consoles
This is a very easy solder job compared to other mods. Looks like something even a beginner could do tbh.
It's an "easy" soldering job, because it's soldered on through-hole component with large separated pads and not on surface mounted components with really close legs. As long as you have flux and an iron, it shouldn't be that hard.
Why don't you just man up and admit you don't know how to solder instead of trying to debate the meaning of the word "easy"?
Like any skill, it always becomes easier with practice.
Unless you have particularly shaky hands, this level of soldering is extremely easy with the right equipment
These intros with rotating consoles and pieces, I love them! One can easily figure out how you do it, but it's so well executed it looks almost magical
literally just about to set up my PS2 again and was dreading the cheap HDMI adapter route. Thanks Tito!
I mean, this is essentially the exact same thing, it's just internal instead of external...
@DarkSerge34 True, however I'm trying to convert as many of my retro consoles from analog to HDMI as cheaply and as quickly as possible. For the price with its flexibility, I've already ordered several for different consoles and projects. Converting old Mini-HDMI analog projects I've already completed for example to give them a full-size port is a dream come true.
@@DarkSerge34 Forgot to mention how much this will save me on excess cable mess as well.
This is the same thing as PS2HDMI you can find for 5 bucks, just without the housing. Ripoff
@@golimonkey it uses a slightly different converter IC and maybe the pcb is laid a tat better, but... yeah, $30+ a piece is ridiculous.
This is the update I was waiting for from your last ps2 mini build. Awesome.
We need more channels like this on RUclips
Great review! I do think you should've reiterated briefly on the interlaced jitter issue, as that can be jarring for some, but I acknowledge that you did already go over it just before. Just nice to have it in the Cons section for those who skip around so they don't forget what they're getting.
The amount of visible movement in that PCB when you plug in the HDMI cable shows the design really needs an extra pair of mounting screws for stability.
How often are you plugging/unplugging? I setup my HTS with several consoles 5 years ago and have yet to touch any plug, HDMI or otherwise.
Great video, I used the same adapter on my Clear Blue Phat PS2. Removed the optical out and mounted a micro hdmi instead of cutting the case. For the price and ease of install this is a great option that provides good video output.
Installed one in my crystal Xbox as well after my xboxhdmi stopped outputting video on me.
How did you mount it?
@@_Jerrylp_ hollowed out the optical housing and fit the female micro hdmi inside. Used a little black hot glue to anchor it.
After a week of binge watching macho nacho that smooth jazz is an extremely welcome addition to your filler music
I'm very happy this product exists, it sits nicely in a gap between cheap external converters and full digital to digital console-specific mods.
it really has no reason to exist though. It adds the complexity of an internal mod but only provides analog-to-digital functionality which has already been available as cheaper external solutions for a long time. This is basically the worst kind of video connectivity solution. If you only want an HDMI connector, just buy a cheaper PlayStation to HDMI adapter which literally is the same thing and doesn't require any modification (plus can be easily switched between consoles). If you want to do an internal mod, save your lunch money and buy a true digital-to-digital HDMI mod kit for the best possible video output and more features.
@@kalmtraveler This is a general purpose mod, I'm sure for some console scenes it will be one of the best options available when it comes to an internal mod. Plus, it's somewhat of a simpler mod since you'll probably solder to easier points (output connectors rather than e.g. GPU pins). Finally, it can be a cool project for someone who likes this kind of tinkering but is doing this to a console that either doesn't have a dedicated digital-to-digital mod available, or is simply not their favorite console ever so they don't necessarily care that much about getting 100% quality. Also the price differential can get more substantial depending on the exchange rates the person is dealing with (for those of us in other countries), though in this specific case the shipping cost makes this point moot. As stated, I simply think it's neat to have an in-between solution available and I'm sure each person can decide on their own if it makes sense for their setup or DIY project!
@@ViewtifulSam I understand as stated. Just saying that this doesn't offer anything new. People have been internally wiring external component-to-HDMI adapters for quite a while, and you can find some of those for lower cost than this kit. I'm not saying that you shouldn't tinker if you just want to tinker, rather that from a value or quality proposition this specific kit does not bring anything new and could be swapped for better options.
@@kalmtraveler Yeah, from a purely practical standpoint I can see your point for sure. The use cases are probably quite niche
why analog audio when SPDIF digital audio is right there?
It also used spdif
Feel like most people forget SPDIF is a thing
Yeah once I discovered SPDIF sound on PS2 it was like I my console was raised from the bottom of a well and sounds like it always should have.
I was here to ask the same thing!!!
Maybe for the native PS1 support? Dunno
Nice vid. Hadn't considered going internal with it myself. The Analog2HDMI board is great! I rigged one up a few years back in an empty SNES cart with Component jacks and a micro USB port for 5v power. Been using it with my Xbox, PS2, and Wii since. Once you start playing the interlacing jaggies are less annoying - to me at least.
this type of content will never be boring to watch.
This really feels like an internal, more generic version of the external adapters Electron Shepard is already selling for the OG Xbox, Wii and PS2 (tho the PS2 one requires an additional USB-C powerbrick).
I guess it's a pretty good option for those who do not want something sticking out their console, want a simple HDMI solution on the Dreamcast or don't want to deal with an extra power adapter for the PS2...
One of the best channels on RUclips! I can see this channel reach 5M easily! Just keep on it, and don't stop! Wish you the best fam! A fan from Saudi Arabia 🖐️🔥✅
Thanks for sharing this mod Tito. This is a great option
I got a spare PS2 that's soft modded, and this is perfect for that. Thanks, glad this is a thing.
Definitely going to pick one up for my Dreamcast, and maybe some of my Gamecubes and N64s too! So great to finally see a more affordable and simple HDMI solution for older consoles.
If you have the earlier model gamecube with the digital video out, the best bet is probably a digital to HDMI as there's no soldering, no opening the case, you just plug it on and it's a pure digital connection.
It's what I'm looking at, but from memory they're about $100 Australian to buy and ship it to me. I haven't made the purchase yet, as I'm still looking for my controllers
I Would Love to See a Videos About This for The OG Xbox and Dreamcast. As Always Another Great Video. Thank You.
Keeping Retro Alive one Macho video at a time!!! 🎉
Electron Shepherd should support with written Instructions, also watch the shipping, $20 for parcel is crazy
Snazzy music ya got there, Tito!
Using an microSD card adapter as a microSD card slot is actually a pretty clever hack considering they come with pretty much every microSD card. I have like a dozen.
But as a slot goes it's bare minimum. I like click-spring action of slots on modern devices.
It feels illegal to be this early! Didn't watch the video yet. But YEAH LETS GOO!! :D
This is great, as much as I would love to have the fxpixel mod, that price range is out of the question, especially since it’s such a difficult install I would risk possibly breaking the ps2 or the mod itself. Great video!
Am I wrong in thinking this will provide the same picture quality as a cheap component => HDMI adapter?
Probably not, the only reason i see to use this over one of those cheap adapters is the convenience of not having to have that thing stick out the back and then power it with an external cable
You are correct. You can achieve the same results with an external converter
You can get a Rad2x and use it to output RGB with line multiplier. Plus you can use it with multiple systems and the same cable can be used with the ps1
@@MachoNachoProductionshi TITO , this is an interesting alternative upscaler mod 😊 hmmm I wonder if "Slipstream GT -mr mods"" uses this or something similar in his custom N64s ??????
Good thing you posted this on a Thursday, like you used to do before. 😉
I actually like the picture from the ElectronAnalog over the PixelFX. That generation of graphics was still a bit jumpy for my tastes so getting the blur from the digital>analog>digital is actually a blessing. In my honest opinion though you should play PS2 games on a CRT. PS3 and XBOX360 are where I start to move into digital display territory. The only old console I really appreciate HDMI or digital mods is the N64. The PS1's lack of FPU makes their graphics look terrible on anything new. I need those fixed 480 lines to smooth some of it out.
While an internal mod is a cleaner solution, if you're not doing digital to digital it's pretty unnecessary as component to HDMI converters are cheap and abundant and aren't limited to being used with 1 console, and if the system is otherwise stock, I wouldn't want to start with a mod like this.
Otherwise, this could be a great mod for cleaning up a retro-setup.
My only other critique would be that, while not quite as small, you could likely achieve the same result with the Wii2HDMI circuit board, save the VGA integration, and last I checked you could get those for $2 a piece depending on where you go.
That mini ps2 is pretty dope!
Any UK / EU distribution for this? Shipping to the UK is £29 which is a real shame as I'd love to take a look at these.
Agreed, double the unit cost for postage is very high.
You can also use a wii2hdmi on any console with few mods 😊
Get PS2HDMI and remove its housing. Same thing, 5$...
This looks great! Thank you for the video.
Your southern drawl came out in this one!!
I like this. Finding a quality Component to HDMI box is always hit or miss unless you want to spend a lot of money on a good scaler. For $20, I think this is a reasonable compromise.
You can (mostly) get away with short runs of analog video over non shielded non coax wires.
But you do run the risk of weird analog video artifacts from interference.
7:40 I was wondering if you could explain where you found this statement to be true - i wanted to do this on a 50001 model, but the layout is different, so now i have no idea if the layout is still in the same order left to right wise
Thank god someone is finally covering this!
I have to ask the question;
Why didn't you use the TOSLink for digital audio?
If this product has a digital audio option, the TOSlink is right next to the AV port and is present on all PlayStation 2 consoles I have ever seen.
It would not only give a perfectly clean audio signal, but offer the option for surround sound too.
I'm seconding this. Would have just been one less wire to fuss over had he just done that.
A lot of newer devices (TVs) don't have this input, and would require an A/V receiver to take that signal in. A/V receivers are just not as popular anymore either.
ElectronShepherd finally got their flowers. Congrats!
Would have loved to see you having four of those and install them to the Dreamcast, GameCube and XBOX as well.
This is a soldering mod I'd dare to try myself.
This reminds me of the time Review Tech USA put a cheap composite to HDMI converter into his N64. I'm surprised it took so long for someone to develop a product like this.
Thank goodness for the Chapter Selection and SponsorBlock extension.
I came straight to the comments and I wasn't disappointed 😂
how awesome would it be to see a mini consolization playlist. i like the small footprint of this and would love to see a smaller modded DC and NES
Very nice but when are we going to start seeing mods for the wii or BC Ps3?😅
The Wii I can see why, but what needs to be modded on BC PS3?
@@computercatgaming02 how about a better smaller/external power supply for starters. That thing runs hot 🔥 all the time, not helping the longevity of the OG consoles 💀
@@GrmDark Fair enough, I just have been fine with CFW and increasing the fan curve to the minimum of 35% and it's been very cool compared to stock settings on both of my BC PS3s, CECHC and my CECHB. But yeah the PSU contributes to a lot of the heat, especially on those models
I could see this being useful as a VGA solution for the Dreamcast
Every single time we come across something as cool as this, it’s out of stock.
Going for the SPDIF would of avoided noise from the video signal getting into the audio and vice versa
Your intro and video production is so drippy. 🥵
Intro always reminds me of Gravity Falls somehow
a flex board to solder down instead of wires would be amazing
Great video, Tito!
I was gonna ask about latency, since it's going from Digital to analog and bake again.
THX for all your awesome videos. I wish I had the skill to do all your mods. I have all my retro machines, but I don't want to mess them up.
Dope tech putting life into retro tech
Just ordered mine. Thanks, Macho! 😊
Estos mods son geniales que sigan sacando mas para este genial sistema play estation 2💪😎🍻
Electron Shepard does have a PS2 to HDMI adapter coming out and given that their OG XBox HDMI adapter turned out pretty good I think it'll turn out just as good
They do? Then I’ll wait because I LOVE their OG Xbox one.
Great HTMI ps2
Legend ❤❤
Best of Best
This is a neat mod, but does it work properly when you play PS1 games? A lot of the external HDMI-adapters for the PS2 does not work properly when playing PS1 games, so it'd be interesting to know if this works properly when playing PS1 games on the PS2.
It should work if it is placed in RGB mode.
Great work!
I feel like the real target audience for this is game stores and similar console resellers. I feel like if you have the skills to do an internal mod you could save up and do a more advanced one if it's for your personal ultimate console. If you are refurbishing consoles to resell for a profit at scale I can see where this would come into play especially if you're trying to just sell to the general public that just wants a plug-and-play option.
For another "con" not mentioned, I'm assuming this does no scaling. That means the few PS2 games and almost all PS1 games that output native 240p when playing on a PS2 will send the 240p signal through the HDMI port, which may be limited with your TV's signal capability.
Is that correct?
I really wish this existed for the SNES 😍
It is interesting that this doesn't support RGB video. If it did, you'd be able to use it on SNES, RGB modded N64s, even RGB modded NES consoles.
EDIT: Actually this does accept RGB looking at the solder mask. But it's RGB HV. I don't think that'll work as the SNES outputs RGBS? I could be wrong though, I'm not an expert!
@@brandonkickFor $19, I think it's worth trying to use it with RGBS. Just connect the sync line to the H or V. Some RGB-capable devices are intelligent enough to tell if a Csync signal is connected, and this one can seemingly already tell if a signal is YPbPr (Which is sync on Luma, basically a BW composite signal) or RGB.
If it doesn't work, just try it in another console (or with S-video since it also supports Y/C)
11:29, I am wondering if you can provide the names for the converter box and the scaler. I have two older consoles - the PS2 Slim, and the Wii, and I would love to play some old games
Wow. You actually uploaded on a Thursday again.
So many of these mods require soldering skills, not everyone has them, it can be super daunting to even consider if you don't
I'd say that the component is probably having a blur filter applied. At least it looks like it from the pictures.
You should try disabling that, I think the custom software has a way to disable that on the PS2. Just bought an external adapter for mine and haven't had time to try it yet.
14:33 that thing really wiggles in there when plugging in. Maybe try some rubber washers
Right, so gamecube on the DOL-101 without the digital SHOULD be on the cards for this little kit. Neat.
if you add a switch to the component jumper you can toggle component and rgb so ps1 games will work in rgb and ps2 games in component
So does this take the component signal or AV? Just to confirm. Sounds like component.
Component or VGA
@@MachoNachoProductions Cheers
This could use more coverage for other consoles. Even a good quality PDF with a handful of pinouts for consoles, and maybe even handhelds.
As much as I love mods like this - and I do - there's always other solutions including not needing to use a dedicated converter box to go Component to HDMI and that's the only thing it does. As much as for Tito something like this is "easy", it still requires intricate micro soldering with steady hands and small cables, where you need to really check you haven't bridged any connections or made dry solder joints.
I have an inexpensive all-in-one type game capture box made by AVerMedia - Game Capture HD II C285 I believe. Not only does it record video because it has 2 inputs (Component and HDMI) but only one output (HDMI) it actually does convert Component to HDMI signal, and always correctly without interlace flicker being passed through the HDMI. So I record game footage from most consoles I own (PS2, PS3, PS4, Wii U, all jailbroken/softmodded) and also make the PS2 work even with modern 4K TVs and monitors that have long since done away with legacy inputs. Using an OPL build with GSM on the PS2 allows you to get up to 1080i from the PS2 as well, which can help for recording sharper video.
I'd recommend a solution like that to anyone, especially since I paid very little for mine and it even comes with a little remote control to stop/start recording, manage files etc. I wish AVerMedia would make another all-in-one standalone for 4K consoles like the PS4 Pro, Series X etc.
right on another great mod video!
I really enjoy your videos keep up the great work
Does it do any scaling, or does it spit out the native 448/480 resolution? Also, I'm curious if it displays in 4:3 or 16:9, since most of your offscreen footage is in widescreen.
That’s awesome! I love your video!! I wonder if you have any video tutorials about how to install $19 hdmi chip to NES (Nintendo Entertainment System console)?
The ogx already has a similar mod where you use a wii2hdmi. Those things are dirt cheap and are just basic component to hdmi converters
I think I'm going to buy this. The video port on my Phat PS2 was broken when it was given to. So I removed the port completely and install a cheap external hdmi adapter internally. It does work, but the whole install is kind of janky. The picture it outputs isn't that great. This looks like it will give a better picture. Would be cleaner looking to install and I already have an open spot for it.
Sounds interesting for the new 386 handhelds 😊
Hmm. Guess I'll keep hoping for a cheaper digital to digital mod for the PS2, something that isn't too expensive because it doesn't do upscaling and effects and expects us to use a RetroTINK 4K or Morph.
Still though, this is cool for people who just want HDMI out without sweating the details, and keeping the price extra low. Definitely has a place in the market.
What about instead of modding inside the console if this can be used for turning a PS2 component cable to an HDMI cable?
That way if someone has a spare cable laying around they don't mind splicing, or if they prefer a No-Cut HDMI solution.
Just an idea I had.
Maybe I'm just not the target audience for this one, but I feel like I want plug and play convenience from analogue to digital solutions. If we're internally soldering something, I want it to be digital to digital.
i mean.. nothing's stopping someone from wiring the converter to an AV plug instead, and putting it in an enclosure, maybe even call it a PS2HDMI adapter
I'm not sure about this one. It's obviously a good quality product, but if I'm going through the trouble of opening up the console, soldering and modding the case to fit, I might as well get a digital to digital mod to get the best quality, even if it's harder to install.
Now, if this had an HDMI plug instead of a port, it could be used to mod an existing AV cable without even touching the console. I think that would be an interesting product.
Otherwise, I like my cheap external adapter. It don't mind a small dongle between the console and the HDMI cable.
I thought he would point out why he was doing it to the Ps2 mini build, that ps2 is the 79000 series and pixelfx doesn't support that particular model (an another i think) at that point you could have the ps2 mini or a different ps2 with pixelfx. i was planning to do the ps2 mini build myself with the electron Sheppard prior to this video being released (along with a clear shell wii). im glad this video came out so i can finally get the motivation to finish it 😂😂
Wow ! super easy and super cheap. Alas am in UK
Yeah, the shipping abroad is a bit high unfortunately, not sure what’s driving that. I’m hoping they can lower it
It would be nice to see how it compares to a set of cables, like the Levelhike or pound cables.
I looked at the kit and I see it doesn't list 240p as a supported resolution so it's usefulness as an addon to HDRetrovision cables would be limited.
Does it come with the wires or do I have to get my own if so does the wire type matter
Definitely cool and affordable for an internal port, but at this point, does it really differ from the eBay HDMI adaptors that use the standard port?
Where can we find the updated shell files that include the HDMI port?
It should be on the bitbuilt page I linked in the description.
@@MachoNachoProductions Ohh I see it now, didn't realize it was a separate link within that post. Thank you!
Babe wake up, new PS2 mod just dropped.
naa.
Good quality Cable + RT5X are better...
And you don't need to cut up a Case of a PS2.
hey dude, pretty cool video, but how do you do the shots at the beggining??? its like magic