Hello. I hope you will appreciate this idea as well as I do, in my opinion this is the best, working option. If you are against it, we can discuss it in the comments)
Finde ich gut diese Ideen,das sieh man auch an den anderen Teilen,wie den Schutz an der Kreissäge oder den Klemmstock an der Bohrmaschine,Grüße crazyrabbit ❤❤❤🐰😊
I have got to know what glue that was that when you squeeze it out, it magically spreads evenly right to the edges of the work peice like that! That is amazing stuff! 😜😁
And again the fake thumbnail draws people in with false ideas. What you do is great, no need to lie about it with a fake thumbnail. People like me get fed up with fake thumbnails and refuse to like and subscribe.
Ich bin handwerklich nicht unbegabt, aber die tollen Anwendungsmöglichkeiten haben mich als gelernten Modelltischler und Kfz_Schrauber doch sehr beeindruckt.
No, you don’t understand. You need to go to Lowe’s, Home Depot and several other stores to purchase all this machinery. This dude is a machinery sales person!
Just brilliant. My plastic clamps do do have a long life due to my low care. Am late 70’s so need to make clamps I will want to care better for for another 20yrs or so. That drill press vice blew me away. I’m well into finishing 2 camper trailers I’ve built from floor up and before I do another I plan to improve my tools...thankyou so much.
Yes Harbor Freight or just buy two ends that use iron pipe in between. Make them as long as you need. You can’t get this short length of square tube and all thread for less than $10, but wait! This video was probably made during Trump era, before Biden put his mark on it. Of course, this is the ONLY bar clamp that I know of that has a full length SCREW an integral yet avoidable component of it!😅
If I get the slightest suspicion of ‘click bait’ I go straight to the comments and if they confirm my suspicions I click off so I’ve watched about 36 seconds of this.
Certainly are not cheap here in new zealand but i think i would still rather pay than muck about for hours making something that to me looks nice but wouldnt last long in my workshop
Once again I was thinking what the hell is he making now! I couldn't figure it out to close to the end, great work. What king of epoxy are you using I didn't see the brand.
When you see the tools you can imagine: "weekend mechanic"... he has expensive tools that he used 4 hours in the last year... at most! Can it be made more resistant?: obviously!.... more complicated?: impossible!.
RIIIGHT !,,,,cause you cant just go to any tool supply store and buy commercially made bar clamps CHEAPER and that take far less time , energy and work to acquire
I agree with you buddy, I didn’t even want to take it off, there are too many of them on RUclips, but I made them anyway because I needed them myself, plus, in my opinion, these are the best option for wooden clamps, I still decided to take them off and it was right, people liked it! Thank you for appreciating my work
Just go and buy a clamp if you need one, they are cheap enough now and probably longer lasting. If you have machinery like that i'me sure you don't need to spend time and effort on clamps that are not as durable as a shop bought ones. The clamps look very nice but i don't see a hobbyist or Pro wanting a workshop full of these. Another 9.20 min taken out of my life, i must remember to fast forward till the end to see if if the finished product video is worth watching full length, normally its not and this is no exeption, Sorry!.
Cool I guess, but.................... why? For less than 1/4 of what the cost of my labor is worth to build those, I can buy them and be making cabinets or furniture = $$$$$
"mort de rire" ! Ou encore : "Tout ça pour ça" ?! Et on passera sur les mesures de sécurité jamais respectées avec l'outillage ! Faut vraiment être un pauvre (hyper) narcissique des réseaux sociaux pour diffuser ça ! (ce qui meritera6la censure rien que pour le DANGER que représentent certaines manipulations d'outils sans la moindre protection !)
So what's with the tire? I lost interest as soon as I realized no tire was going to be featured.😪 get it tired not only fake , but dumb thumbnails. Why not say what it's about ,instead of attracting the viewers that aren't going to LIKE AND SUBSCRIBE.
Hello. I hope you will appreciate this idea as well as I do, in my opinion this is the best, working option. If you are against it, we can discuss it in the comments)
It's brilliant. This time your thumbnail isn't misleading. 👍👍👍
Do you provide building plans?
Es una idea muy interesante. Te interes de seguir tratando el tema. Cómo debo hacer ?
De kinderen eten pasta de pasta eten het eten het uu
Very nice clamps !!! But a lot easier to just go buy some clamps !!!
I watch many of these that pop out of nowhere but this one is Very Good ! Congratulations !
The amount of money in tools alone just makes my mind explode.
Friend, I have been collecting these instruments for more than ten years)
Thank you ! Best video ever ! Very inteligent ! No music ! Speeding up some parts ! Wov !
Thank you for appreciating my work! I will continue to try to make interesting projects!
Whatever the fashion, more clamps are never a problem.
You're right, buddy! Clamps will never be superfluous
Beautiful job , I have the same kind of clamps but there metal and pipes !
Beautiful workmanship
Thank you for appreciating my work!
Incredible.
I would've just gone to the store and bought a clamp
Finde ich gut diese Ideen,das sieh man auch an den anderen Teilen,wie den Schutz an der Kreissäge oder den Klemmstock an der Bohrmaschine,Grüße crazyrabbit ❤❤❤🐰😊
I couldn't afford all the tools he has, but hey good for him!
My friend, I’ve been collecting these tools for years, thank you for your feedback.
Wow you re invented the bar clamp. Amazing
Fool. I guarantee you couldn’t make anything near as good as this.
That is a fantastic idea for my students to make. Well done 👍🏻👍🏻
I have got to know what glue that was that when you squeeze it out, it magically spreads evenly right to the edges of the work peice like that! That is amazing stuff! 😜😁
And again the fake thumbnail draws people in with false ideas. What you do is great, no need to lie about it with a fake thumbnail. People like me get fed up with fake thumbnails and refuse to like and subscribe.
*EXACT-A-MUNDO!!!* 👍👍👍
Some of us older gentlemen (aka assholes) go so far as to block the channel for stuff like this.
@@clarencegreen3071 *curmudgeon me 3*
Glad I saw your post, saved me 9 minutes.
@OOICU812 I try.
Super!!!
Very Good!
Ich bin handwerklich nicht unbegabt, aber die tollen Anwendungsmöglichkeiten haben mich als
gelernten Modelltischler und Kfz_Schrauber doch sehr beeindruckt.
Could you please provide some plans? Great work, this is gorgeous!
If you want to get a good quality thing, do it yourself! I respect the master for his work.
yes , you can make lots of cool stuf , with a quarter million dollars worth of tools in a nice shop .
"It's Very simple" ????
I was hoping this build wouldn't be something I could go to Lowe's and buy for $10, but alas.
No, you don’t understand. You need to go to Lowe’s, Home Depot and several other stores to purchase all this machinery. This dude is a machinery sales person!
Impressive. Triple wow!!
Great work…I’m simply too lazy to put this much work into this. Also I have other things I’d rather do…lol
Yes, I agree, it’s often easier to buy than to make it yourself, but I like a hand-made tool
I play all of this type of videos at 2x speed.
Without all of that labor and material, I can go to the store and buy one of those for $18
Fantastic idea, well made too, nice one mate 🤩🙂
Nice!
Just brilliant. My plastic clamps do do have a long life due to my low care. Am late 70’s so need to make clamps I will want to care better for for another 20yrs or so. That drill press vice blew me away. I’m well into finishing 2 camper trailers I’ve built from floor up and before I do another I plan to improve my tools...thankyou so much.
Well it looks simple if you own a machine shop😳
This is similar to traveling from Rome to Paris via Tokyo and Manilla.
Give me a break; there is all ways Harbor Freight.
Yes , True , But Building Your own , For Your own use has it's own many rewards !
Nice
Too much labor for something that could be bought for a fair price. At least this gentlemen has sharp saws & drills.
I agree, nowadays you can buy everything, but I’m interested in making it myself
Well, wasn’t that exciting!
I’ll have nightmares tonight.
Nicely done...but google "proper use of a metal file" to make life a little easier!
The tool created is good and also good work, but what's the point of the photo on the wheel of the car... what's the point of that?
If you squeeze a wheel with a clamp, the air pressure in it will increase)))
Thank you for appreciating my work!
It's nice, but I could buy a clamp just like it from Harbor freight for about 15 bucks
Not everyone is in the U.S. or have them that cheap. Clamps are bloody expensive in the U.K. and Europe
No, my friend) for 15 bucks you can only buy a Chinese knockoff of inferior quality, which will not work for even one project
Yes Harbor Freight or just buy two ends that use iron pipe in between. Make them as long as you need. You can’t get this short length of square tube and all thread for less than $10, but wait! This video was probably made during Trump era, before Biden put his mark on it. Of course, this is the ONLY bar clamp that I know of that has a full length SCREW an integral yet avoidable component of it!😅
The fun part is making the clamp 👍😵💫
Yes, very simple
Bad thumbnail, don’t do that. Turns people off. Just show the real picture.
If I get the slightest suspicion of ‘click bait’ I go straight to the comments and if they confirm my suspicions I click off so I’ve watched about 36 seconds of this.
They are called sash lamps. Cheap as chips in Lidl.
Certainly are not cheap here in new zealand but i think i would still rather pay than muck about for hours making something that to me looks nice but wouldnt last long in my workshop
Genius!
Thanks buddy
Its hardly easy to make, unless you got those materials, equipment and spare time. Great craftwork nonetheless.
It is fine to do this because you can and perhaps you enjoy making these things but really, I would rather buy some clamps.
"Not everyone knows how it works", but a LOT of people don't know what it is, or what it does.
So you made a clamp? What a waste of time.
Is this a wheel clamp to protect your vehicle ! 🤔
I don't get why you split the bolts in half.
Once again I was thinking what the hell is he making now! I couldn't figure it out to close to the end, great work. What king of epoxy are you using I didn't see the brand.
How many repetitive times does it take to have the viewers understand the process?
Классная струбцина, но надолго? Ведь столько сил потрачено
Ну да на долго, они то вечные по сути
Bella idea
Also bei uns gibt es so etwas im Baumarkt! Das Ding heißt SCHRAUBZWINGE!
Wnd product too bulky and cumbersome for most tasks. Fine video skills.
Went to aldi
Sigh, what a lot of work to replace the cheapest type of long-reach clamp. That shop-made drill press vise looks cool, however.
👍👏👌🤜🤛🤝. Классно. Удачи. Благодарю.
Car boot sale, steel ones, £2 each....🤣
So whats the thumbnail all about?
Just get a set of sash cramps.
When you see the tools you can imagine: "weekend mechanic"... he has expensive tools that he used 4 hours in the last year... at most! Can it be made more resistant?: obviously!.... more complicated?: impossible!.
It's a lot of work fofr not much !!
RIIIGHT !,,,,cause you cant just go to any tool supply store and buy commercially made bar clamps CHEAPER and that take far less time , energy and work to acquire
Whats its use for car? Tyres? Wheels? 😢 Fail to understand after watching full video whats to be done with it? What made you to make this??
They cost $6 usd each 🤣
What has this got to do with a car tyre
None, I put it on by accident) Although as an option you can increase the pressure in the tire, I don’t know why, really)
Ganz gut... aber man muss nicht alles mit Maschinen machen,... Fase mit der Fräse usw... das gefällt mir nicht. Das ist die neue Bequemlichkeit
Nice clamp. But thats all I want to say . Way too much of this type of content.
I agree with you buddy, I didn’t even want to take it off, there are too many of them on RUclips, but I made them anyway because I needed them myself, plus, in my opinion, these are the best option for wooden clamps, I still decided to take them off and it was right, people liked it! Thank you for appreciating my work
Is this thing somehow useful to clamping on the tires of cars? Why do you show this in the photo?
It seems that some people are against
craftmanship. This shows what you can do with what you have. Stop being so blamed negitive!!
Just go and buy a clamp if you need one, they are cheap enough now and probably longer lasting. If you have machinery like that i'me sure you don't need to spend time and effort on clamps that are not as durable as a shop bought ones. The clamps look very nice but i don't see a hobbyist or Pro wanting a workshop full of these. Another 9.20 min taken out of my life, i must remember to fast forward till the end to see if if the finished product video is worth watching full length, normally its not and this is no exeption, Sorry!.
Wooden sash clamps - nothing to do with cars ☹️
Simple I don't think so. I'll pop down the nearest DIY shop and buy one much easier and less labour intensive
Nice if you have $5000 worth of tools…the rest of us will go to Harbor Freight for $20.00
Cool I guess, but.................... why? For less than 1/4 of what the cost of my labor is worth to build those, I can buy them and be making cabinets or furniture = $$$$$
Too much work! There are clamps that do the same thing.
Thanks for the criticism)
@@menscraft7985 You are quite welcomed.
Bit of a misleading title, , pointless as any person with these skills, will have a good set already!
Not everybody can afford to buy all the tools for making a clamp like that, buying one is much cheaper!🖕
What's the matter? Cat got your tongue?
You would be better buying proper clamps
And probably a cheap !!!!
Kann man Kaufen ist Billiger
Wow dick around all day making a cumbersome balky bar clamp when I can buy one on Amazon for 13 bucks. Ingenious 🤦🏻♀️
Wofür soll das jetzt sein?
👍🏻👍🏻
Hey this isn’t a Minecraft video
*all of that just so girlfriend can reach high enough to kiss you*
What a waste of time
Clamps are so cheap
Let me go ahead and block this garbage click bait page!
"mort de rire" !
Ou encore :
"Tout ça pour ça" ?!
Et on passera sur les mesures de sécurité jamais respectées avec l'outillage !
Faut vraiment être un pauvre (hyper) narcissique des réseaux sociaux pour diffuser ça !
(ce qui meritera6la censure rien que pour le DANGER que représentent certaines manipulations d'outils sans la moindre protection !)
No read minds .
Next
So what's with the tire? I lost interest as soon as I realized no tire was going to be featured.😪 get it tired not only fake , but dumb thumbnails. Why not say what it's about ,instead of attracting the viewers that aren't going to LIKE AND SUBSCRIBE.
What a pain in the A$$…
Lair
Wtf
Thumbnail 💩💩💩💩💩💩
A piece of art. But not cost effective & not worth to spend time on it.
All that I’m not impressed go out and buy them