8 Big Mistakes in RCC Column | 8 ऐसी गलती जो पिलर बांधते समय होती है?
HTML-код
- Опубликовано: 1 апр 2020
- कृपया घर बनाने को मज़ाक में बिलकुल न ले, ध्यान दे इन बातों पर..!
- पिलर का सरिया में जोग्गल (मोड़ना) बिलकुल न करवाये, घर गिर सकता है
1. 7 Big Mistakes in RCC Beam | 7 ऐसा ग़लती जो बीम बांधते समय होता है?
• 7 Big Mistakes in RCC ...
2. 8 Big Mistakes in RCC Column | 8 ऐसी गलती जो पिलर बांधते समय होती है?
• 8 Big Mistakes in RCC ...
3. Best Zone of Lapping in RCC Slab | स्लैब के सरिया का लैपिंग कहाँ देना है?
• Best Zone of Lapping i...
4. Best Zone of Lapping in Beam | बीम का सरिया का लैपिंग कहाँ देना है?
• Best Zone of Lapping i...
5. What is Joggle? Why we Bend a bar while Lapping? सरिया का लैपिंग में जोग्गल क्यों देते है?
• What is Joggle? Why we...
6. Reinforcement Lapping zone of Column for Residential Building | कॉलम में सरिया का लैपिंग कहाँ देना
• Reinforcement Lapping ...
7. Big Mistake of Column Top Surface at Construction Site
• Big Mistake of Column ...
8. Big Mistake in Formwork | Shuttering Failure at Construction Site |
• Big Mistake in Formwor...
*Contact Details:-
Email:- civilengineer.deepakkumar18@gmail.com
Twitter: / erdeepak4kumar5
Facebook: / er.deepak4kumar5
Facebook page: / er3deepak4kumar5
Instagram: / er.deepak4kumar5
*Join my Channel Membership
/ @civilengineerdeepakkumar
#MistakeColumn #PillarMistake #CivilEngineering
सर आपके द्वारा जो सिविल की जानकारी दी जाती है उसे कोई भी ब्यक्ति समझ सकता है क्योंकि जब आप समझाते हैं तो वो अति सरल भाषा मे होता है जिसे हर कोई समझ सकता है आपको मेरी तरफ से कोटिकोटी धन्यवाद , मेने जो अपना घर बनाया है वो आपकी विडियो को देख देख कर बनाया है आप मेरे गुरु हैं
thanks
कृपया बोर्ड पर डायग्राम या रेखचित्र बड़ा बनाया करें , ताकि स्पष्ठता दिखाई दे व और अच्छे से समझ आवे । उसी से तो जानकारी जल्दी पकड़ में आती है ।
धन्यवाद ।
मेरे पड़ोसी का घर बन रहा है, आपसे सीखी कई छोटी पर मोती बातें व आपके बारे में जरूर बताता हूँ ।
Aap kaha se hai sai ji
Bhai bana to liya ,par mistri aur majdoor logo ne aapse kach kach nhi kare kya, kyuki vo log apne hissab se banate hai na
Good idea,deep knowledge and everyone satisfied with video 🙏
सर आप के samjhane का तरीका बहुत बढ़िया है सर में तो आप का फ़ैन हो गया
बहुत अच्छा लगा आपकी बिल्डिंग की ज्ञान की जानकारियां वेरी नाइस ।
thanks
बहोत बडीया जानकारी दिया आपने दिपक जी
बहुत अच्छी जानकारी है सर आपके पास आप रियल में बहुत बारीकी से समझाते हैं और आप के माध्यम से कई लोग अपना घर बना सकते हैं जो बारीकियां बताई वह वाकई में बहुत लाभप्रद है
इतनी लाभप्रद जानकारी और इतने सरल भाषा में समझाने के लिए बहुत बहुत धन्यवाद सर।
Kindly let me rouph map of 20by 50ft double plot both side roads on w/a
मुझे भविष्य में अपना घर बनाना है और मै कुछ भी नहीं जानती ।
आप की बातें बिल्कुल सही है ,हम सब केवल मिस्त्री के भरोसे रहते है ।
आप के वीडियो हमारे लिए बहुत ही उपयोगी है ।आपका बहुत बहुत धन्यवाद ।🙏🙏🙏🙏
DEEPAK JI LOTS OF THANKS TO YOU FOR INFORMATIVE TIPS
excellent prevention of dangerous mistakes in column ,footing & beam bars bending #👍👍👍
बहुत बढ़िया जानकारी दी सर जी आपने धन्यवाद्
नमस्कार सर, इस तरह के विडियो बनाने तथा इस तरह समझाने के लिए बहुत-बहुत धन्यवाद। सर मेरा एक प्रश्न है आपसे कि lapping zone अर्थात दो सरिया के जोड़ को अगर वेल्डिंग करा दे चाहें वह कॉलम का हो या बैंड का तो अच्छा कौन होगा? सरिया के जोड़ का बांधना या वेल्डिंग कराना।
बहुत बढ़िया जानकारी बताई हैं धन्यवाद दीपकजी
बहुत ही अच्छा गुरुजी आपने सही बताया है
Sir pls make more video about proper concrete joints.
Sir, I proud to tell you that you have super fantastic marvelous lovely knowledge of civil engineering , simple method of explaining , all everything is in rich manners.
Thank you a lot.
बहुत ही अच्छी जानकारी दी सर जी धन्यवाद
अशी अचूक माहिती प्रदान केल्याबद्दल मनापासून धन्यवाद.
Thank you so much sir 🙏
Ap bahut talented hai sir
thanks
Bahut acchi jankari di gaye. Very very nice.
Bahut bahut thanks
👍
इतनी अच्छी जानकारी के बाद भी न जाने वे कौन लोग हैं जो डिसलाइक कर रहे हैं.....
हो सकता है उन्हें समझ ही नहीं आ रहा हो(नासमझ)
Aaaq
सर एक हाल बनाना है26फिट लंबा 40 फिट चैड़ा इसके पिलर बीम कितने गहरे कितने मोठे होना चाहिए
वैसे स्र्किनशाट लेने के लिए , पहली बार किसीने टाईम दिया है। धन्यवाद ! 👌👌👌
Many many. Thanks sir jankari dene ke liye
Thanks sir for all information given by you 👍
It really help us
Great sir.. You have explain entire things in such a easy way.. It will really help us
Bahut bhut dhanyavad sr ji
Very important knowledge share sir🙏 thank you
Sir aap ka 1st point meri problem hai
Lekin wo pilar beem ke bad upar nahi jayega
To koi jyada problem to nahi hogi q ki dhalai ho chuki hai pilar ki
Jankari ke liye thanks
Sir itne ache mistri hi nhi mil pate .
Bas aj kal har koi thekedaar bna ghoom rha hai , Kash app jaise logo ki ginti aur bhi zyada ho 👍
Column ka lap length concrete grade ke according hota hai. Is liye aap har baar 50d ka use nahi kar sakte.
Yes not for everytime but most of all.
18.5 fit by 38 feet Lamba ka ghar ka naksha bataiye Uttar dakshin ka naksha
बहुत सही सर
बहुत ही सटीक जानकारी
सर् प्लीनथ बिम्ब को फोर कर उसमें नया कलम दे कर उस में फिर से मशाल भरने से प्लीनथ कमजोर तो नही होगा
Sir plz draw a building design L=65ft; W=30ft for rent purpose. Includes utility space & only 1 BHK room is preferable..
If u are serious than I will do it ,,,,,
Tnq u sir 4 Ur kind response.
Very helpful knowledge
बहुत ही अच्छी जानकारी
सर कॉलम को कैसे डिजाइन करते हैं। उस में कोन सा कंडीशन देखते हैं। जैसे कि 4 रोड या 6 रोड कैसे देते हैं ।
depend on floor
Sir,lapping length depend on grade of concrete.If grade of concrete is increase then lap length will decreases.
Nice Question!!
Subscribe to my free online Tutorial on Civil Structural Analysis Engineering!!
ruclips.net/user/Civilstructuraleguru
Namber give me sir
Bahut badhiya
Thanks .. It is very good to understand small small points. It will be really helpful for general public...
Dear sir please tell me before shuttering in column , where tie the cover block . 1- vertical bar or 2-outer ring(Stirrups) .1 Which is the best position of cover block?
rind
Ok
Nice Question!! Understanding!!👍
Subscribe to my free online Tutorial on Civil Structural Analysis Engineering!!
ruclips.net/user/Civilstructuraleguru
@@CivilEngineerDeepakKumar lol
Ur words can understand only professionals who work in this field.
This video is not 4 common men who wants 2 build his/her own house
Thanks Deepak Sir Very Good
सर जी आपने बहुत अच्छी जानकारी दी मैं मिस्त्री का काम तो नहीं करता लेकिन जनसाधारण के लिए जानकारी बहुत अच्छी है
Sir please post a video . In autocad how to import field coordinate in autocad my coordinate is N=1234.506,E=4656.456
Slunted column kese dete hain
एक वीडियो बनाइये के एक फोलो तक जाता है पिलर सीधा प़र दूसरे फोलो प़र अलग किया जाता है पिलर तो ओ सही है के गलत कीव की आज कल बहुत हो रहा है
Nice Question!! Understanding!!👍
Subscribe to my free online Tutorial on Civil Structural Analysis Engineering!!
ruclips.net/user/Civilstructuraleguru
Thanks bro
I am proud of u.
Very good informational videos.
So nice of you
बहुत खुब सरस माहीती ते बदल आभार सदा खुश रहो ये दुआ हे हमारी
Sir wt will charges of plumber, carpenter, painter, and tail fitting charges
Delhi Noida Haridwar Dehradoon me building ya house banwane ke liye contect kre 8273279127 contractor
Labor charges....
Plumbering 18 to 20 Rs.
Wood work, 30% of material cost.
Putty 5 rs/sqft
Primer 3 rs/Sqft
Paint 5 rs /sqft for 2 coat.
Tile 18 to 22 rs/sqft.
It is a variable cost it may be up down but today's if any of service provider take more than it don't make any agreement.
My house is a 2 floor building but after completion Labor cut all the Rods of Pillar..If I want to do 3rd floor then how to do Pillar...???
Welding
@@shinkakumari1441... Rod dikhao nahi deta uske upar concrete ho gaya finishing k time.. Welding kaise kare
Pillar nahi use coloum kehte he... Apko building banate vakt hi dowel chhodna chahi tha
... Solution batao
@@khirod84 kisi expert architecture ya civil engineering ki salah lo
Samjhane Ka Tarika bhi achcha hai bahut acchi Jankari De
Thank you so much Deepak Sir 🥰
Always welcome
Sir, 1300 sq ft house banana hai, to only column cost kitna pad jayga
Delhi Noida Haridwar Dehradoon me building ya house banwane ke liye contect kre 8273279127 contractor
How to reduce cracks in the wall
Thank you very much depak kumar
Usefull massage thanks
स्लेब मे लोहा किस प्रकार बाँधा जाये यह भी बतलाऐ।
धन्याबाद
Very nice knowledge❤️❤️👌👌 .. thanks for sharing your valuable experience🙏🏻🙏🏻
Thanks for liking
Bahut achha aapne gyan diya hai sir ji. Have a nice day.
Sir aap bahut achcha video banate ho bahut achcha retata hai
Berry.good.& important.information
Thanks 🙏 for your very valuable information . Love from Assam
मिस्टेक वीडियो सीरीज बहुत ही ज्ञानवर्धक है ।
Excellent information. Thank you
Very very thanks for excellent knowledge
Mr Deepak Kumar , your all informations are fantastic.
90% of the people don't know the mistakes by the cheaters . very grateful to you and thaks a lot.
God bless you and family.
Thanks a lot
Very good program sir
Highly valueable information, thanks for sharing 💯🙏
Very nice and clear explain. 👍👍👍
Thank you so much 🙂
Good teaching
Aapko bahut bahut dhanyawad
thanks for nice information
Bahut acha jankari
Very good work sir 🙏🙏🙏👌 you are very good teacher
Very good knowledge give you sir.Present time this type knowledge is essential for every building maker owner..v.k..sir Bihar govt teacher.
सर बहुत अच्छा लगता है
Jabarsat jankari sir thanks
Very good educated engeenier sir.good job sir.
Thanks
Thank you sir..
Dhanyawaad dost!!
Excellent video
U R SUPERB ...SIR
Most Humble and Lovable style
Very useful. Well explanation. Thanks.
Thanks❤🌹 Sir
apka har video se bhut se jankari milta ha thankyou
welcome
बहुत ही अच्छे से आप जानकारी देते हो। धन्यवाद आपका।
Thanku
Bah very nice advice
no 1 jankari sir
Thank you so much sir bohut badhiya kiye ❤️
App ka bohat bohat dhanyavaad.
Very very good knowledge about civil engineering you have sir! thank you.
Excellant knowledge of civilization work.
सर आपके द्वारा दी गई जानकारी का मैं कायल हूँ।(धन्यवाद सर)
thanks
Nice advice sir Thomas thank you