When pulling off MagSafe products, e.g, chargers and phone holders, does the ring get pulled out along with it? Seen some people have that issues with similar products
Hey, with my Belkin 3 in 1 Pro I know the ring does not get pulled out along. But I just gave it a try with few different MagSafe products. With a baseus 20W or Anker MagGo, it is 50/50 but it does not get pulled fully just a bit and then goes back in place. With the hinge at the top and I pull off the phone in a down motion the ring does not get pulled out, but if the hinge is at the bottom and I pull the phone in the same down motion it gets pulled a bit and then it snaps back.
Great review. HERE, take my money! 😀The rotating ring and colored buttons are a game changer. I've read a few scant reviews however where the Action Button is interfered with. QUESTIONS: 1.) do you have any issues the Action Button? 2.) Do the Torras clear cases show fingerprints too easily or yellow over time?...
Thank you. And yes the rotating stand is really great, gives you a hug range or different view angles. ANSWERS: 1 .) No I have no issue with the action button, I have used the black and green button cover and no issues. Works as it should. 2.) Fingerprint is very less, even when I use it while in the gym with sweating hands. And for Yellowing I will say no. I have had a few cases over the years and none of them have gone yellow or lost colour.
I’m wondering how well the stand would work with the heavier Pro Max model and whether the stand would collapse with the weight. I’m not sure which I should go for, the Ostand or 360. 🤷🏻♀️ BTW, I looked at other videos and they didn’t get the extra colored buttons that you received.
Hey, yes it will work fine. As I know it worked fine on a iPhone 14 Pro Max and that’s heavier than the new 15 Pro Max. That’s weird, I know for the Ostand R comes with the extra metal buttons and it also comes for so other torras case but their are plastic ones.
I have a concern with metal button with no layer protecting the iPhone buttons. Few other iPhone cases have same issues with metal buttons. Is the 360 version have metal or plastic in default set up?
The metal part of the replacement buttons has a small plastic layer on the inner side before it touch the buttons on the iPhone. And no It comes with Metal buttons as default
Thanks so much for your feedback. Much appreciated. Have also viewed your Andobil 360 review. Very similar which would you recommend. One thing I am looking for is a raise camera lip. Still have not decided shortlisted above and Rebel 5, ESR Max Cloud soft with stand and Caudabe. So many choices haha
Is the air case from torras any good? I meant like protection wise. I’m in canada and I ordered the ostand air case almost 2 weeks ago and it still hasn’t arrived.
Hi, great review! Is the rubber slippery on the sides when you hold the phone on the rotating ring version? Also the air cushion technology case with the metal button, does it come with any spare metal buttons, the bumper does not appear to be as slippery? Thanks
Hey, great review. I couldn’t find any other video comparing 2 cases. I need a case that sticks to metal surfaces. Which one of these sticks stronger to metals?
I did purchase this in the clear option which would go nicer with my white/silver titanium iPhone and I really like this case but I find the buttons too sensitive especially the power button. It is too easy to click!! Are you experiencing this issue? I don’t know what to do to remedy this.
@@SLuxsaan06 yes thanks for confirming. I believe it shouldn’t make a difference with strength on a charger as it uses the round section on wallets etc does it use the additions magnet to keep straight where the extra magnets come in.
@handleit No worries. Yeah I think the rotating feature will be a better use. I have both case and I feel like both have strong magnetic. I just like the Ostand R more because of the rotating stand as it gives me more angle and view positions
Awesome video I couldn't find anyone else review this case thanks!
I am glad I could help! I really love this case.
When pulling off MagSafe products, e.g, chargers and phone holders, does the ring get pulled out along with it? Seen some people have that issues with similar products
Hey, with my Belkin 3 in 1 Pro I know the ring does not get pulled out along. But I just gave it a try with few different MagSafe products. With a baseus 20W or Anker MagGo, it is 50/50 but it does not get pulled fully just a bit and then goes back in place. With the hinge at the top and I pull off the phone in a down motion the ring does not get pulled out, but if the hinge is at the bottom and I pull the phone in the same down motion it gets pulled a bit and then it snaps back.
@@SLuxsaan06 fair enough, thanks for replying!
Great review. HERE, take my money! 😀The rotating ring and colored buttons are a game changer. I've read a few scant reviews however where the Action Button is interfered with. QUESTIONS: 1.) do you have any issues the Action Button? 2.) Do the Torras clear cases show fingerprints too easily or yellow over time?...
Thank you. And yes the rotating stand is really great, gives you a hug range or different view angles. ANSWERS: 1 .) No I have no issue with the action button, I have used the black and green button cover and no issues. Works as it should. 2.) Fingerprint is very less, even when I use it while in the gym with sweating hands. And for Yellowing I will say no. I have had a few cases over the years and none of them have gone yellow or lost colour.
I’m wondering how well the stand would work with the heavier Pro Max model and whether the stand would collapse with the weight. I’m not sure which I should go for, the Ostand or 360. 🤷🏻♀️ BTW, I looked at other videos and they didn’t get the extra colored buttons that you received.
Hey, yes it will work fine. As I know it worked fine on a iPhone 14 Pro Max and that’s heavier than the new 15 Pro Max. That’s weird, I know for the Ostand R comes with the extra metal buttons and it also comes for so other torras case but their are plastic ones.
Does the ring fold flush to the case? Or does it stick out slightly?
It is flush with the case
I have a concern with metal button with no layer protecting the iPhone buttons. Few other iPhone cases have same issues with metal buttons. Is the 360 version have metal or plastic in default set up?
The metal part of the replacement buttons has a small plastic layer on the inner side before it touch the buttons on the iPhone. And no It comes with Metal buttons as default
Thanks so much for your feedback. Much appreciated. Have also viewed your Andobil 360 review. Very similar which would you recommend. One thing I am looking for is a raise camera lip. Still have not decided shortlisted above and Rebel 5, ESR Max Cloud soft with stand and Caudabe. So many choices haha
Is the air case from torras any good? I meant like protection wise. I’m in canada and I ordered the ostand air case almost 2 weeks ago and it still hasn’t arrived.
Which case? Do you have a link? Did you have a look at the tracking via Amazon?
Hi, great review! Is the rubber slippery on the sides when you hold the phone on the rotating ring version? Also the air cushion technology case with the metal button, does it come with any spare metal buttons, the bumper does not appear to be as slippery? Thanks
Hey, great review. I couldn’t find any other video comparing 2 cases. I need a case that sticks to metal surfaces. Which one of these sticks stronger to metals?
I did purchase this in the clear option which would go nicer with my white/silver titanium iPhone and I really like this case but I find the buttons too sensitive especially the power button. It is too easy to click!! Are you experiencing this issue? I don’t know what to do to remedy this.
Hello, quick question how does the grip compare from the Clear Case version to the others?
Does it work well with the MagSafe battery pack?
I have tried it with the Anker Magsafe 633 PowerBank and it works fines. Both the charging and the magsafe, with a strong connection.
Both the same 18n magnet strength. I checked Torras website.
Yes both cases have a magnetic force of 18N but the Ostand R have N52 magnets and the Ostand have N56 magnets
@@SLuxsaan06 yes thanks for confirming. I believe it shouldn’t make a difference with strength on a charger as it uses the round section on wallets etc does it use the additions magnet to keep straight where the extra magnets come in.
@handleit No worries. Yeah I think the rotating feature will be a better use. I have both case and I feel like both have strong magnetic. I just like the Ostand R more because of the rotating stand as it gives me more angle and view positions
Thanks for the review, I ordered one pro max.
Thank you very much. Hope you used my link to order the case, as it will support my channel and help me make more videos like this ☺️
how to buy
The links are in my description, for USA, Canada, UK and Germany