Hey boss. I’ve went through your video several times. Got the puzzle lib downloaded. But when I open any of the puzzles in lightburn, the puzzle pieces are not double lined like they are in the video. I’m not sure if I’m missing something, or if I downloaded the wrong file?? 🤷♂️ but I downloaded every file you gave on your site yesterday (12-12-2023) Any help would be appreciated. Thanks
Thanks for all your suggestions on cutting a jigsaw puzzle, operating from the controller. Today I manage to cut a jigsaw puzzle with engraved photo grabbed from the Internet. The actual engraving is not up to par, but the picture was of a couple strolling in the rain. Very cloudy day picture.
Thank you so much. I bought my first laser engraver and this helps me so much to save a lot of time and i learned a lot in this short and easy explained tutorial.
Brilliant, I've tried puzzles before but always had too much trouble. This will make it so easy I guess I'll have to try again. 😁 Thanks for the video, great to have you back!
I watched this video before but was a newbie and figured this was beyond me. NOW, I watched it again and see some perfect personalized Christmas presents for the grandkids. I love the tabs/bridges function which is a BIG help. Great video Rich.
Rich Lightburn should be paying YOU! You are a wealth of information! Or I guess so many of US that use Lightburn are un willing to read the documentation! I will say it is a lot to digest.😁🛫
i was wondering what happen to you not heard from you in a while .....glad all is well and you are back to some what of a normal life and back up and going .....as always great videio and i will give it a try and see what happens
hi there Rich good video just wondered if you could make a video on actually making the pieces step by step so i can create my own puzzles would like to learn and you make your videos so easy to follow thanks and hope you can find time to make the video
Thank you for the great videos you definitely make things easier to understand! I just became a member of the forum and downloaded the puzzle pieces which only have a single line. I researched it and made sure it was in line mode but also saw another that said it is only a single line now is that correct?
I've only done one jigsaw myself, it was one of the single line cuts as opposed to double that you show, and I found with kerf pieces were too loose. Wouldn't this shown here make the gaps between pieces even more pronounced?
I just ran across this video and it is great. I did see the response about glung a color picture to 3mm ply and cutting out the puzzle. I wonder if a person glued the picture on the material and then cut it from the back side if that wouldwork better?
Absolutely Brilliant vidclip ..... Greetings from New Zealand ..... I just happened upon your vidclip and am Totally intriqued ..... Will drop you an email with More Questions .... :-) :-) :-) .... Best to All from NZ
Another great video as usual. I think this a great idea. Going to try this with pics of my grandson. I downloaded the puzzle file. When I put one in Lightburn though it doesn't show the double kerf lines when I zoom in and there is no perimeter line on the outside of the puzzle. Am I doing something wrong?
Good video bro. One question, how do i get my cuts on my layers to cut at certain rotation. I move the layers and it still does not set up the way I won't. If you or anyone else can help me I would appreciate it. Thank you
Mecpaw coming in Friday, will set up and start free trial of Light Burn, then add lib files and burn my first image. I have my mind set on a kinetic sculpture at some time in the future. Thanks for the reply.
You have to download them to the right folders Katie. I have full instructions on the download page Katie. Some folks have to right click on the files and choose, "Save link as" to be able to specify a folder.
Hi Rich sorry to bother you. I am slowly going through your RUclips video's and loving them all. I am only a year into laser's and I now have the sculpfun S30 ultra 33W. I just came across the this video reference jigsaw puzzles. I have had a look in the forum art library but I cannot find the puzzle file in their. If you still have it would it be possible to point me in the right direction. Many thanks and once again another great video. 👏
@@TheLouisianaHobbyGuy Hi and thanks for the quick reply. I am a member on your forum and I have most of your free art library, but I can't see the jigsaw puzzle file. I will log back in and take a closer look thank you 👌
@@TheLouisianaHobbyGuy Hi again sorry to be a pain. I have searched the whole library for the puzzle.lbart but I haven't had any luck. from page 1 to page 4. It could be that this video is 2 years old and the file may have been removed. never mind I will try to work it out myself and I appreciate you have taken time out to reply. thanks for the video's. Mick 👏
Hi Rich i can not find the file Puzzles in the forum ,I can find one marked puzzles - V - 5 but this does not have the double cut line where can I find them please
Hi There @The Louisiana Hobby Guy (Rich) ....first off all....i just bought my first laser (sculpfun S9) and learnder A LOT from you.....CUDOS !!! But when i check your site and download your updated puzzles for ightburn...they are NOT double lined....is that a roblem...no use for that anymore ? greetz from the Netherands
This was so helpful! But I am having trouble finding the file for the single line version. The double lines are still very loose pieces. Can you share the link to buy the single line puzzle? EDIT - I found it! I didn't realize there was a forum separate from the website.
I have another question I have been taking photo graphs and mounting them on card stock then applying the puzzle template of yours. After running the file the kerfs seem to be too wide. and I have followed your kerf set up video to create the off set for a tighter fit but they are way to lose. what am I doing wrong?
I'm just beginning my laser journey, actually I have not yet bought a laser. Could you laminate a high-quality color picture onto a piece of plywood and then use your template to cut it into pieces? What would be the problems with this?
Well, a typical 5W diode laser produces about 3255 Kelvin, or 5399° F when focused to a 1mm beam. The speed at which it travels significantly lowers the temperature, but it still does vaporize wood or plastic; that's how it cuts. It would do the same to printed photos and melt or burn all of the edges.
I downloaded puzzle from Cuttle. When previewing cut file I get message "8 shape(s) were set to fill, but weren't closed. These have been removed as they cause problems....Options are Show me or Continue?
Hi Rich I have downloaded the puzzles to my Art Library but they don't have double cut lines for the pieces or outline. It was puzzles V2 that downloaded Can you help Derrick
Janette, you're a Patreon supporter. *You have free access to my graphics website* engraveandcutfiles.com/. If you didn't get your 100% discount code, please email me and I'll send it to you. support@engraveandcutfiles.com
I have tried this cutting out the puzzle pieces with the double lines and it is just to sloppy of a fit. if you just make 1 cut in the middle of the pieces they will fit together but I am having problems getting it to trace down the middle of the lines.
Hi, thanks for this tutorial! I may have missed something but I can't find the puzzle art library in the forum (I am a member). Any chance you can post a link? :) Thanks!
@@TheLouisianaHobbyGuy thanks. I did use the search but couldn't find it at the beginning. After some more research I now found it, but I saw several people commented on the forum they couldn't find it either. Maybe worth pinning a post with the exact search term to look for. Thanks anyway - that's awesome!
The only file I see in your members only download section is Puzzles-v-5. When I install that into Lightburn 1.2.01, they seem to all be single lines, not double lines like in the video. Am I looking at it wrong? (I am new to Lightburn) Also: Since there is a slight gap between all the pieces when you cut (so each piece is cut individually), when you place your photo on top of the puzzle pieces, it seems that you will be missing these tiny gaps in the photo when you put the pieces together. as a puzzle. Wouldn't/couldn't it be noticeable?
Hey Rich, another fantastic tutorial. I just downloaded and installed your V-5 Puzzle library and when I drag a pattern into Lightburn, they are not double lined, they are all single lines...am I missing something? I know I am, as it's alwasy 97% user error :)
@@TheLouisianaHobbyGuy ok thanks Rich. Next dumb question would be, do they cut fine with the single line? And then for your template to fit whatever image, just duplicate the outside perimeter?
@@TheLouisianaHobbyGuy Although you can't edit a video, you can put a text overlay to point out changes/mistakes/improvements at certain moments in the video. Maybe that can help in some cases.
Hello, I don't know if you will still reply to the comments, but I would be interested to know if you know the way to leave the puzzle pieces in a single cut and not in two passes.
Yes, just ungroup them and delete one, and then change the passes to 2 in the cut settings editor. I have changed all of my puzzle downloads to 1 line now.
hi Rich i just downloaded and checked out these files then took a look at the attached vid and in the vid it mentions you have to have a two line cut to make these puzzle templates work .. thing is all the designs in your new updated v5 puzzle Templates are all single lined :/ can you explain to me how to make these templates double lined or if there is a vid made for explaining how to ?? thank you , :D
What if you're wanting a puzzle using an image with no background? Like a downloaded image of say Santa Clause. How can I get the laser to cut out outline of Santa without having these itty bitty pieces? TIA
at 2:59 I am doing something wrong . I imported a pic but I dont get the option to apply the mask to the image. how are you selecting both the image and the square template behind it?
@@TheLouisianaHobbyGuy i did that. i tried skewed images off center, lager image over the template, smaller image within the template. so I am doing something wrong. I tried control A but that selected EVERYTHING including the puzzle pieces. i used a jpeg for the image I wanted for the puzzle. does it have to be a different file type?
@@TheLouisianaHobbyGuy I had to assign it a cut layer. Then it worked . However the puzzle pieces don't show through like yours. But it. Looks correct in the preview.
Great job making these tutorials, this Puzzle looks like a fun project. Can you provide a link for the Puzzle Files, apparently I'm challenged . Thanks ... Tim
Hi Tim, the download is in the Members Only section of my Forums. Once you become a member, the download section will magically appear 😎 lahobbyguy.com/bb
@@TheLouisianaHobbyGuy hello. I have fallowed you advice and became a membre I have foun the puzzle but it have ".lbart" extension.... What program do i use to open it? I use LightBurn and Corel 6 Thank You
why do you make it so difficult for newbies, i joined your forum and still cannot find the down load for puzzle, you make it very discouraging for people who are BRAND NEW. maybe you should take into consideration everyone is not computer savy or laser savy, thats why we come to youtube
Sorry if you're having trouble Lori, but I try and make it as easy as possible! Here's how easy it is: Login into the forum --> Click on Member's Only Files & Downloads --> Click on Laser Cut Puzzle with template. *Literally TWO clicks!* I don't think anyone can make it any easier...
WOW!!! The audacity of some people! Rich, on behalf of the thousands of inexperienced, computer illiterate, NOOB's that you have helped (especially me) I apologize that someone would respond to you in that manner! I have been putting in the work, studying hard, and feel like I am making excellent progress in Lightburn University with Professor Rich as my instructor. When I have a question I actually go to your extensive library and forum for the answers, and even if my inexperience or ignorance couldn't find the answer I would never blame in you! Thank you for what you have done for us all.
I love making puzzles! This will walk you through it without missing ANY steps!
Hey boss. I’ve went through your video several times. Got the puzzle lib downloaded. But when I open any of the puzzles in lightburn, the puzzle pieces are not double lined like they are in the video. I’m not sure if I’m missing something, or if I downloaded the wrong file?? 🤷♂️ but I downloaded every file you gave on your site yesterday (12-12-2023)
Any help would be appreciated. Thanks
Thanks for all your suggestions on cutting a jigsaw puzzle, operating from the controller. Today I manage to cut a jigsaw puzzle with engraved photo grabbed from the Internet. The actual engraving is not up to par, but the picture was of a couple strolling in the rain. Very cloudy day picture.
Glad I could help!
Thank you so much. I bought my first laser engraver and this helps me so much to save a lot of time and i learned a lot in this short and easy explained tutorial.
Glad it helped Simon.
I'm so glad I stumbled across your channel. Great info in a concise, comprehensible format. Awesome work. Thank you so much.
*Awesome,* thank you Martin!
Another great tutorial! I've been thinking of making a family portrait puzzle for my mom who is in assisted living. She loves puzzles!
I'm sure she would love that Lon! 👍
Glad you're ok and back! Awesome videos!!
Thank you Doc! Glad to be back! 👍
Brilliant, I've tried puzzles before but always had too much trouble. This will make it so easy I guess I'll have to try again. 😁 Thanks for the video, great to have you back!
Definitely try it again George! It's one of my favorite projects for the grandkids and they love them! Good to be back! ✔
I watched this video before but was a newbie and figured this was beyond me. NOW, I watched it again and see some perfect personalized Christmas presents for the grandkids. I love the tabs/bridges function which is a BIG help. Great video Rich.
Glad you enjoyed it!
Dónde está la descarga para hacer los puzzles?
Wonderful video! Thanks!👍
*Thank you! Cheers!* ✔
I just learned something new.....never knew about the tabs. Rich....you da' man!
Thanks Keith! Oh, and there's so much more to the tabs and bridges! I left most of it out for another video!
As always a GREAT video. I can not wait to try this. Thanks.
Have fun Tim!
Always look forward to your videos...the best I've found !
*Wow, thanks Patrick!* 👍 So glad to hear that!
Can’t wait to make some puzzles.
Awesome! Everyone that sees them wants one!
❤❤❤thank you so much, I just made my puzzle with acrylic transparent.
Wonderful Yvette! These are fun to make!
Thank you so much. I will be back to review this one again.
Thanks Rebecca!
Tabs safe so much aggravation and save thy acrylic works , lightburn is the best software I own , thank you
*Great to hear!*
Rich Lightburn should be paying YOU! You are a wealth of information! Or I guess so many of US that use Lightburn are un willing to read the documentation! I will say it is a lot to digest.😁🛫
I wish! One at a time makes it easy to learn.
@@TheLouisianaHobbyGuy I am 84. Worry not about a President's age, just his experience.
i was wondering what happen to you not heard from you in a while .....glad all is well and you are back to some what of a normal life and back up and going .....as always great videio and i will give it a try and see what happens
Thank you Mark! You can't get rid of me that easy! 😁
hi there Rich good video just wondered if you could make a video on actually making the pieces step by step so i can create my own puzzles would like to learn and you make your videos so easy to follow thanks and hope you can find time to make the video
Yes Sir! It's on my list, probably a February video.
Добрый день. Спасибо огромное за простое и наглядное руководство. Хочу заметить, что при резе элементов пазла простой линией, тоже результат отличный.
Yes, a single line is best, thank you!
Hi Rich. Have you ever tried cutting white sublimation ready 3mm plywood.
I am wondering if it burns or not the white Sub coating.
No Andy, I have not personally, but other people have!
Thank you for the great videos you definitely make things easier to understand! I just became a member of the forum and downloaded the puzzle pieces which only have a single line. I researched it and made sure it was in line mode but also saw another that said it is only a single line now is that correct?
Awesome, thank you Jerry! Yeah, I do them in a single line now.
@@TheLouisianaHobbyGuy Thank you for the quick response will I need to mess with a kerf offset?
I've only done one jigsaw myself, it was one of the single line cuts as opposed to double that you show, and I found with kerf pieces were too loose. Wouldn't this shown here make the gaps between pieces even more pronounced?
Yes, I use the single line now as well.
@TheLouisianaHobbyGuy
Have you altered the puzzle files on your website then Rich?
I just ran across this video and it is great. I did see the response about glung a color picture to 3mm ply and cutting out the puzzle. I wonder if a person glued the picture on the material and then cut it from the back side if that wouldwork better?
I don't think that would work. Maybe on a C02 laser, but not a diode Mike.
@@TheLouisianaHobbyGuy thanks.
thank you! where is the puzzle library?
On my free forum Jim, in the member's only download section. Link in the description.
Absolutely Brilliant vidclip ..... Greetings from New Zealand ..... I just happened upon your vidclip and am Totally intriqued ..... Will drop you an email with More Questions .... :-) :-) :-) .... Best to All from NZ
Welcome aboard!
Another great video as usual. I think this a great idea. Going to try this with pics of my grandson. I downloaded the puzzle file. When I put one in Lightburn though it doesn't show the double kerf lines when I zoom in and there is no perimeter line on the outside of the puzzle. Am I doing something wrong?
No Jim, I changed it to single line. Seems to work better.
I added the puzzle to my art library, but when I go to any of the puzzles, it does not show double lines
I changed to single lines, but I can't edit the video once it's published.
Good video bro. One question, how do i get my cuts on my layers to cut at certain rotation. I move the layers and it still does not set up the way I won't. If you or anyone else can help me I would appreciate it. Thank you
On the Laser Tab, click on optimization settings.
Thank you brother. I have a Geieke Cloud Pro Co2.Making a puzzle for my grand daughter.
Are there more complicated cuts for puzzles that don't have the same common shapes?
You can create your own!
Mecpaw coming in Friday, will set up and start free trial of Light Burn, then add lib files and burn my first image. I have my mind set on a kinetic sculpture at some time in the future.
Thanks for the reply.
great video, i've downloaded the puzzle library from your website however cant find any files when i try and load into lightburn?
You have to download them to the right folders Katie. I have full instructions on the download page Katie. Some folks have to right click on the files and choose, "Save link as" to be able to specify a folder.
The requested URL or webpage address /product/lightburn-puzzle-templates/ was not found.
engraveandcutfiles.com/?product=lightburn-puzzle-templates
How do I make my own puzzle patterns in Lightburn that have to be cut twice?
Try posting on my free forums Kim. lahobbyguy.com/bb I can't answer that in a comment.
Hi Rich
sorry to bother you. I am slowly going through your RUclips video's and loving them all.
I am only a year into laser's and I now have the sculpfun S30 ultra 33W.
I just came across the this video reference jigsaw puzzles.
I have had a look in the forum art library but I cannot find the puzzle file in their.
If you still have it would it be possible to point me in the right direction.
Many thanks and once again another great video. 👏
You have to be a free member on the forum to see the downloads.
@@TheLouisianaHobbyGuy Hi and thanks for the quick reply.
I am a member on your forum and I have most of your free art library, but I can't see the jigsaw puzzle file.
I will log back in and take a closer look
thank you 👌
@@TheLouisianaHobbyGuy Hi again sorry to be a pain. I have searched the whole library for the puzzle.lbart but I haven't had any luck. from page 1 to page 4.
It could be that this video is 2 years old and the file may have been removed.
never mind I will try to work it out myself and I appreciate you have taken time out to reply.
thanks for the video's.
Mick
👏
Where can I find the puzzle downloads? Thanks
On my free forums. lahobbyguy.com/bb
Hi Rich i can not find the file Puzzles in the forum ,I can find one marked puzzles - V - 5 but this does not have the double cut line
where can I find them please
I removed the one with the double lines. Folks had too much trouble using it.
How can I get hold of your puzzle grids
They're on my free forums in the members only area. lahobbyguy.com/bb
Hi There @The Louisiana Hobby Guy (Rich) ....first off all....i just bought my first laser (sculpfun S9) and learnder A LOT from you.....CUDOS !!! But when i check your site and download your updated puzzles for ightburn...they are NOT double lined....is that a roblem...no use for that anymore ? greetz from the Netherands
Hi Passie, no, I've since gone back to the single line puzzles. They work for everyone.
Thanks you 👍👍🇳🇱
Thank you too Ben! I appreciate you watching! 👍
This was so helpful! But I am having trouble finding the file for the single line version. The double lines are still very loose pieces. Can you share the link to buy the single line puzzle? EDIT - I found it! I didn't realize there was a forum separate from the website.
Awesome! Glad you found it!
I have another question I have been taking photo graphs and mounting them on card stock then applying the puzzle template of yours. After running the file the kerfs seem to be too wide. and I have followed your kerf set up video to create the off set for a tighter fit but they are way to lose. what am I doing wrong?
Try not using any kerf offset at all. That seems to work best for me.
I'm just beginning my laser journey, actually I have not yet bought a laser. Could you laminate a high-quality color picture onto a piece of plywood and then use your template to cut it into pieces? What would be the problems with this?
Well, a typical 5W diode laser produces about 3255 Kelvin, or 5399° F when focused to a 1mm beam. The speed at which it travels significantly lowers the temperature, but it still does vaporize wood or plastic; that's how it cuts. It would do the same to printed photos and melt or burn all of the edges.
I downloaded puzzle from Cuttle. When previewing cut file I get message "8 shape(s) were set to fill, but weren't closed. These have been removed as they cause problems....Options are Show me or Continue?
Change the layer from fill to line.
Hi Rich I have downloaded the puzzles to my Art Library but they don't have double cut lines for the pieces or outline. It was puzzles V2 that downloaded
Can you help
Derrick
I updated it to single lines. Found that it works better that way Derrick.
What material do you print on and or use as a backing for the puzzle? Thanks
I don't understand the question. It's just a simple piece of basswood that I engrave and cut.
@@TheLouisianaHobbyGuy what paper do you print the image on?
Would this work for Print & Cut?
Yes, anything works in Print & Cut.
v5 does NOT have the double lines you mention in the video...
I don't use them anymore Elizabeth.
You mention being able to download some of your projects but where do I go to be able to download an item?
Janette, you're a Patreon supporter. *You have free access to my graphics website* engraveandcutfiles.com/.
If you didn't get your 100% discount code, please email me and I'll send it to you. support@engraveandcutfiles.com
I have tried this cutting out the puzzle pieces with the double lines and it is just to sloppy of a fit. if you just make 1 cut in the middle of the pieces they will fit together but I am having problems getting it to trace down the middle of the lines.
I do all single line puzzles now Caleb. I don't know what trace down the middle means. Try posting on my free forums. lahobbyguy.com/bb
Hi, thanks for this tutorial!
I may have missed something but I can't find the puzzle art library in the forum (I am a member). Any chance you can post a link? :)
Thanks!
Use the search box at the top of the forum Yarden.
@@TheLouisianaHobbyGuy thanks. I did use the search but couldn't find it at the beginning. After some more research I now found it, but I saw several people commented on the forum they couldn't find it either. Maybe worth pinning a post with the exact search term to look for.
Thanks anyway - that's awesome!
@@yardennaveh2441 I would have to pin a LOT of posts! 🤪
@@TheLouisianaHobbyGuy fair point 😜
This looks like a fun project. But where is the puzzle template?
The puzzle templates / Lightburn files are available on Forum Zombie, in the Members only Download section.
@@TheLouisianaHobbyGuy I must be missing something. i dont see a link in the description.
@@icemanfred lahobbyguy.com/bb
The only file I see in your members only download section is Puzzles-v-5. When I install that into Lightburn 1.2.01, they seem to all be single lines, not double lines like in the video. Am I looking at it wrong? (I am new to Lightburn)
Also:
Since there is a slight gap between all the pieces when you cut (so each piece is cut individually), when you place your photo on top of the puzzle pieces, it seems that you will be missing these tiny gaps in the photo when you put the pieces together. as a puzzle. Wouldn't/couldn't it be noticeable?
I've since changed to the single line puzzles. Watch my video about kerf offset. There will always be a gap where the puzzle is cut.
@@TheLouisianaHobbyGuy Ok. Thanks!
Hey Rich, another fantastic tutorial. I just downloaded and installed your V-5 Puzzle library and when I drag a pattern into Lightburn, they are not double lined, they are all single lines...am I missing something? I know I am, as it's alwasy 97% user error :)
No Jud, I changed them all to single line and refitted them. RUclips doesn't allow editing of videos.
@@TheLouisianaHobbyGuy ok thanks Rich. Next dumb question would be, do they cut fine with the single line? And then for your template to fit whatever image, just duplicate the outside perimeter?
@@TheLouisianaHobbyGuy Although you can't edit a video, you can put a text overlay to point out changes/mistakes/improvements at certain moments in the video. Maybe that can help in some cases.
Hello, I don't know if you will still reply to the comments, but I would be interested to know if you know the way to leave the puzzle pieces in a single cut and not in two passes.
Yes, just ungroup them and delete one, and then change the passes to 2 in the cut settings editor. I have changed all of my puzzle downloads to 1 line now.
I just finished making a puzzle with photo engraved. Running from Controller. Message "No enough extended memory"???
Delete some of the older files on the controller.
@@TheLouisianaHobbyGuy I only have around 10 files but will delete all but a couple and see if that helps, thanks for your patience!!!
Is it ok to resize the templates or will that mess it up?
Yes you can.
hi Rich i just downloaded and checked out these files then took a look at the attached vid and in the vid it mentions you have to have a two line cut to make these puzzle templates work ..
thing is all the designs in your new updated v5 puzzle Templates are all single lined :/ can you explain to me how to make these templates double lined or if there is a vid made for explaining how to ?? thank you , :D
I've stopped using the double line puzzles. They're all single line now.
Thanks for prompt reply 👍 do they work just as well then ?? 😁
Yes
What if you're wanting a puzzle using an image with no background? Like a downloaded image of say Santa Clause. How can I get the laser to cut out outline of Santa without having these itty bitty pieces? TIA
Put the puzzle cut layer on top of the image.
DONDE ESTA EL LINK DE DESCARGA?
It's on my free forums. lahobbyguy.com/bb
I lost my layers palette. How do I restore them?
Window --> Reset to Default Layout
Could you print a image on photo paper and stick it to card then cut it out on the laser?
Sure, that's how it's done. People mod podge it. A C02 would be best for this, but a good diode can do it with air assist.
@@TheLouisianaHobbyGuy I may give it ago as just got my first laser sculpfun S9 and have fitted air assist to it.
Hey Rich, where do I download the puzzle file? Thanks.
In the member's only section of my free forums: lahobbyguy.com/bb/
@@TheLouisianaHobbyGuy As always thanks
Hello..i am just a begginer in laser engraving..in my lightburn..my "art library" is empty..how can put a puzzle layout ?
ruclips.net/video/uqZyyfeubOk/видео.html
@@TheLouisianaHobbyGuy thankyou😊
I cannot get your library to download for the puzzles if you could shoot me a text on how to do that I would appreciate that thank you
Instructions are at the top of the page Linda.
at 2:59 I am doing something wrong . I imported a pic but I dont get the option to apply the mask to the image. how are you selecting both the image and the square template behind it?
Drag from the bottom right, up over both slightly to the left. Dragging from the bottom right selects everything in the path.
@@TheLouisianaHobbyGuy i did that. i tried skewed images off center, lager image over the template, smaller image within the template. so I am doing something wrong. I tried control A but that selected EVERYTHING including the puzzle pieces. i used a jpeg for the image I wanted for the puzzle. does it have to be a different file type?
Try starting over with a blank slate. Maybe a different file format for the image? I can't imagine why it wouldn't work for you.
@@TheLouisianaHobbyGuy I had to assign it a cut layer. Then it worked . However the puzzle pieces don't show through like yours. But it. Looks correct in the preview.
@@icemanfred Click Window --> Check "Filled / Smooth" and it will look like mine.
Puedes poner donde está el archivo para descargarlo? Alguien me puede ayudar?
It's on my free forums. lahobbyguy.com/bb
Hello, comment faire pour obtenir votre grille de puzzle sur lightburn ? Merci d'avance
It's in my free forum, lahobbyguy.com/bb
Désolé je ne trouve pas ?
It's on the main page. You can only see the category if you're a member.
👍🏻👍🏻👍🏻👍🏻👍🏻
Thanks again Lonnie!
PLEASE HELP. I downloaded it.I only see one line. There are two lines in the video.Parallel.Thank you.
The line is in fill mode. Change it to line mode.
@@TheLouisianaHobbyGuy Thank you. Greetings from Hungary
I am doing something wrong, I did everything in the video. Everything looks good until I hit preview and it just shows black.
Zoom way in in the preview window and you'll see it Glenn. When you're using images, you don't see the gradients, just a big black blur.
@@TheLouisianaHobbyGuy Thank you for the response and the videos.
Where are the puzzle files? They are not in Art Library, at least I cant find them
Members only downloads... 4th from the bottom.
Still can’t find, what page is it on?
@@thedeveland There's only one page in Members only downloads... 4th from the bottom.
more then 12 hours for it?
It depends on your laser and settings.
Seems like the puzzle lib is not in your current package
Click the store link in the description. The free file is there.
Great job making these tutorials, this Puzzle looks like a fun project.
Can you provide a link for the Puzzle Files, apparently I'm challenged
.
Thanks ... Tim
Hi Tim, the download is in the Members Only section of my Forums. Once you become a member, the download section will magically appear 😎 lahobbyguy.com/bb
@@TheLouisianaHobbyGuy Thanks, signed up and looking forward to learning more about LightBurn.
*Great Tim!* _See you there!_ 👍
@@TheLouisianaHobbyGuy hello.
I have fallowed you advice and became a membre
I have foun the puzzle but it have ".lbart" extension.... What program do i use to open it?
I use LightBurn and Corel 6
Thank You
@@adrianchenciu9440 You don't open art files Adrian. You open Lightburn, go to the Art Library Tab and click on Load.
Very nice, why are all the best ideas so obvious after someone else desribes them?
😁 I have a bunch more up my sleeve Zebo!
Was that 12 hours 41 minutes to make?
Nope, not even close.
why do you make it so difficult for newbies, i joined your forum and still cannot find the down load for puzzle, you make it very discouraging for people who are BRAND NEW. maybe you should take into consideration everyone is not computer savy or laser savy, thats why we come to youtube
Sorry if you're having trouble Lori, but I try and make it as easy as possible! Here's how easy it is: Login into the forum --> Click on Member's Only Files & Downloads --> Click on Laser Cut Puzzle with template. *Literally TWO clicks!* I don't think anyone can make it any easier...
WOW!!! The audacity of some people!
Rich, on behalf of the thousands of inexperienced, computer illiterate, NOOB's that you have helped (especially me) I apologize that someone would respond to you in that manner!
I have been putting in the work, studying hard, and feel like I am making excellent progress in Lightburn University with Professor Rich as my instructor. When I have a question I actually go to your extensive library and forum for the answers, and even if my inexperience or ignorance couldn't find the answer I would never blame in you!
Thank you for what you have done for us all.