To download the latest version of VSDC, go to the official editor’s page: bit.ly/3LX0tht Questions? Suggestions? Feel free to leave them in the comments below or email us at support@videosoftdev.com How-to page: www.videosoftdev.com/how-to-use-free-video-editor
Oh I missed you! And worried too... Hope all is well with you all! Great tutorial, it's very good for those who are starting to use a software to have at least a basic tutorial to start And for those who already know, the truth is that sometimes you end up discovering a little thing or another that you missed and didn't know 🤭
the little thing I keep accidentally rediscovering is that the *MINUS* key is extremely important when silencing audio. To silence it, you need to set it -100. But you end up mostly deaf when you forget the minus key and set it to 100 instead (remembering that ZERO is full volume) lol. I just did it again by accident. Every time, I think I've learned my lesson. Then I do it again :P
@@Vexarax Hello Manumelita!!! I read your message in the other post and I'm glad you found alternatives... but I'll still try to reproduce this scenario you reported and I'll tell you what I got... I entered more to answer your message there in the other post when this one appeared here for me, because I'm going to sleep a little now since I'm awake until this time working. I loved your testimony in the messages for the idiot (sorry for the term used), it was very well said and it just shows that there are more important things and people with strength and will to overcome what life sometimes imposes on us. Congratulations and much success to you. As soon as I really have time to experience the scenario with dedication, I'll let you know the result, ok?
@@Vexarax Ahh that really happens, things like that are easy to happen when we're editing, even more so if it's a bigger, more complex edit... Then we sneer, laugh and continue our editing 😂
@@coffeelover1456 no pressure on reproducing the red bar annoyance! But say you get a full episode of a show (Game of Thrones, Witcher etc, like 50 mins) and want to edit 30 seconds of it. You open the Cutter and Splitter tool and set the markers, then you close the tool and delete the segments on either side of the part you want to keep. Then you open Cutter and Splitter again to more precisely trim your 30 seconds frame by frame, and unfortunately the _entire_ episode is retained, so if you skip back too far in your clip you go to an earlier point in the deleted part of your episode (and if you accidentally edit the deleted part, it deletes your clip) 😱 Prior to the update, the parts you delete would remain deleted, making editing your work in the Cutter and Splitter easy and precise. Now it's not only difficult, it's also dangerous because it's easy to accidentally edit the deleted part and lose your edit!! I've just stopped using the Cutter and Splitter entirely, which is sad because it's a great tool - but it's very odd that someone decided it would be beneficial to retain all the deleted material (especially considering it ruins your edit if you accidentally work in the red part which is easy when you're trying to work with a tiny clip within a huge amount of deleted footage). If it affects enough people they may revert it back to how it used to be, fingers crossed! (or maybe there is an advanced editing reason to retain the deleted material?). But other than that I love the program!! Though I am still slightly deaf from turning my audio to 100 instead of MINUS 100 lol oops fail. I did it twice tonight somehow :p It's 4.42am here, I am also going to sleep ^_^
Thank you for all your comments, Coffee Lover. Regarding discovering little things: we do add little things here and there with each release, so we'll probably need another "Getting started" video in about a year or so, to cover them all.
thnx for the basics, learned some minor details that can make my experience better, btw can u guys explain all types of blur and all options available in masking tab, pls!!!🥺
@@VSDCFreeVideoEditor its really great to see that u guys are so active and take your viewers seriously, so thank u all for that and i wanted tutorials on blur effects like u guys always use gaussian blur to blur the whole object or scene but never have talked about box blur or other options, plus there are many other options in masking tab, like source in, destination out, most of the time i just cant find the right way to use them properly so please can u guys explain all these in your next tutorials🥺, i am not a pro at video editing in fact i am a complete newbie thats why i am asking for this so if u guys can then pls make this tutorial🙏
So I've been using this software for awhile and I have to say the recent update has caused alot of frustration. Cutting and Splitting footage has never been more confusing and unintuitive. I cut a scene from footage and the cut scene still the ENTIRE video itself, which means its hard to keep track of where the specific piece of footage is. If you stretch the footage slightly in either direction you completely lose the scene. Why was this decision made? Cutting and splitting was so easy before this update. Is there anyway at all I can access the previous version of VSDC?
How to start? I own your program and have used it so little as I find that its very easy to get lost just trying to make a video I turn to anther program as I find its easy to get what I need dont in few clicks and it runs my 2000X video speed good.. When doing this in yours I have yet to get it to work.. Its something in your program thats eating up a lot of system. If other video editors can do it smoothly at 720 and yours is so much better, why dose it hang up.. Yes I have gone threw your videos on how to fix it with little luck. What I found is that If I edit the basic video, speed it up and then build it as a MP4 and bring it back in and add all the other stuff it runs much better. This was my work around to the problem of dealing with such speeds.. (amd ryzen 7 5700G 3.80 -16 GB - win 11 pro) .. Over all the program can be very overwhelming to new users who know little about this and has what I would call a steep learning curve. The click her then over here, then this , and that, move this, click that, ok on that box, next, and pow you just got your first name in... you get what Im saying.. As you know your program in and out and understand what it can do I was hopping that you guy would come up with what I would like to call a "LITE version" of your program.. Something to think about.. TY and I will keep plugging away.
I don't know if I understood correctly what you said, so if I say something that doesn't correspond with what you said, please disregard... Ease of Use: For all the people I introduced to VSDC (and there were many) they all found the program super easy to use, they quickly understood the general functioning and how I always indicate the material on the VSDC website for people to study, quickly they were using more advanced features and tools... some even said that anyone who has used Powerpoint in their life can use VSDC easily; Equipment: VSDC is among the software that requires less resources to run, being possible to use VSDC in low-end machines... I could see this for some people that I introduced VSDC who don't work professionally with video editing but want to make their videos with quality... Of course, you shouldn't expect miracles because editing and finishing videos requires equipment with a good standard of performance at the very least; Lite Version: I didn't understand it, I couldn't make the slightest sense so I can't talk about it; Workflow: I didn't understand the flow you reported in the msg, the problem you faced, I honestly couldn't understand it, but it seems to me something strange in the how-to process and not in VSDC
I hope you can continue using VSDC and investing in your learning... it's an excellent video editing software, it can easily be used within a professional editing workflow. I hope you have a better experience with VSDC, more and more!
@Lankster Price - I have no editing training at all, and only properly started using comps for editing a couple of years ago (I'm in my 30s) yet I have found VSDC the easiest and simplest to master for what I require :o I have even been able to invent new things I couldn't find tutorials for (like extreme custom art subtitles). I am editing very heavy 1080p footage for hours on end every day, and I do all of this on the free version, on an Acer all-in-one comp I bought in maybe 2016? It's system is so old/low that I am totally unable to upgrade to Windows 11. I tried other programs but couldn't get them to run on my comp. What program are you using that is easier and runs more smoothly because I have never come across one, especially at a comparable price (ie free)!
Hello, please refer to this guide: ruclips.net/user/shortsIZXZ4z_7Czo?feature=share If you require any further information, feel free to contact us at support@videosoftdev.com
Nice, with it's absurdily low requirements (1 GB RAM, I mean come on, chrome consumes more RAM than this whole video editor) one might think this editor only does basic stuff but it does pack quite the punch! Now there are more advanced alternatives out there, but I don't think an old laptop is gonna appreciate them, so a mid-advanced editor for low end PC's running smoothly seems pretty promising!
I've watched several beginning tutorials...all of them do the same thing...they go through too many of the options without showing the process from beginning to end. That is what I would like to see. When you are starting out, too many 'options' confuse the issue. In the beginning, I don't care how many places I can import a video...I want to see 'one' then show the next step, then the next step, then the finished video
Hello, there are several ways, we suggest the following: 1. Add a line and set it up in the properties window prnt.sc/6OEHD5NHAram 2. Double-click it to open a new timeline tab and add a rectangle prnt.sc/HAtYrwuVN2_v 3. Adjust its settings in the properties window prnt.sc/3-RhQfWCruDF apply a mask prnt.sc/Pa_D9x_SYtX0 4. Double-click the rectangle and add a movement prnt.sc/4z6T7xvqychN
Hi, My name is Rasthro, I use VSDC Pro Video Editor for my videos and it is an amazing experience editing my videos in a professional video editor like VSDC, Anyways I suggest a feature called "Motion smoothing" where the tool creates new fake motions in a 30fps or 15fps animations to make the motion smooth, It is also known as "Frame Interpolation" I hope you took my idea and you will add it on future updates
Wanted to ask about an issue I’ve had with cutting and splitting. I understand how it works, and have been able to get through my videos fine, but whenever I make a split in my video, it takes forever to load and will normally bring the program into not responding. My pc is more than powerful enough, and I have the pro version bought for the extra hardware acceleration. This problem makes editing my videos take much much longer, and was wondering if there were any recommendations on how I could possibly fix this?
Hello. Sometimes a preview window may lag. Lagging is resulted from the fact that the editor is processing all changes made. It doesn’t affect the resulted video Have you seen this tutorial: ruclips.net/video/JASSFWJHwbw/видео.html&t ? High quality/high-resolution Project/4K projects: ruclips.net/video/5d1TXjYMuok/видео.html
hello, I just installed the software, but compared to the workspace of the editor in your videos, my workspace is too tight, it's like the different parts of the workspace are squeezed together, it gives a claustrophobic feeling, even the video preview is really small, my PC resolution is 1080 x 1920, is there any way to make it look for a lack of better word "wider"? Do you need a screenshot of my workspace?
Hello, please consult this tutorial ruclips.net/video/GjZlw-so0QQ/видео.html Our team generally records tutorials on 4K or 2K screens, which means the workspace might appear slightly different on regular HD monitors. However, there's a simple solution to ensure a consistent experience. You can manually customize your workspace and save this configuration using the convenient "panes manager" feature. This will allow you to tailor the layout to your specific needs and avoid any display inconsistencies: prnt.sc/iZZbVSpY4W8t
Nice entry level tutorial, very helpful, thanks. I have a question, is it possible to add chapters in VSDC? I am making home videos of my kids and those can be quite long. I would like the ability to add chapters so I could easily skip to the next chapter with my remote instead of the longer and not as precise fast forward. I have been looking everywhere for this but can't find the answer, which makes me doubt if it's even possible, which I would think it is as this doesn't seem to be an advance features. Any help would be appreciated. Thanks.
@@VSDCFreeVideoEditor Thanks for the reply. My understanding is that MP4 does support the additions of chapters, yet all the video editing softwares I have looked at don't seem to supports this unless it is to create DVDs or BluRays. In an age where unfortunately physical media is disappearing and digital media is prominent, I would think this feature would have been made available when creating digital content as it is pretty useful, especially if you are creating long files. Anyway, just something to think about for your future development. Thanks again for the reply.
What is best setting exfort for video gaming ? ... when I finished editing my video, I tried to export it but the results weren't good, the file size was large but the video quality was broken can you help me please ? ... 🙏
Hello, To help you resolve the issue, we need more information about the project you’re working on (about the effect you’ve applied/the setup you’re using/the project settings you’ve selected/your video format/etc) Please email us at support@videosoftdev.com and provide us with a detailed description.
I have to isolate the small clip of a few seconds from a long video. I have isolated the clip using split into parts button and deleted the unwanted regions. But when i start the video, its showing me blank black screen with no sound at the area where i deleted the video part. Can you tell me how to remove that blank area and how to fix this problem using which command?
Hello, You can simply drag one file next to another on the timeline using your mouse to close any empty spaces. Additionally, you can use the "Set blocks order" option to rearrange files: prnt.sc/ixLD11h7SdED If you require any further information, feel free to contact us at support@videosoftdev.com.
I was trying to combine a bunch of clips to make a time lapse video. I cannot find a way to apply it to all the clips at once. Is there a way to do it once I convert them to a sprite?
Hi. Just I want to know why the videos after converting. Are so large. They are very big. I mean size of the videos. A video of 1 hour sized 4GB.(videos for RUclips channel). Please answer me.
Hello, The size of the exported file depends on its bitrate. Please consult our tutorial - ruclips.net/video/yGRXVXRTWz0/видео.html The program calculates mathematically it in a different way, it doesn’t display the original bitrate of the video that you can find in file’s properties. The file size cannot be lower than the input one because while conversion VSDC encodes a new file. If you want to keep good quality, you need to set high bitrate, but the higher bitrate is, the large file you get after export. Also, you can set up the file size in the Profile settings, but it may potentially affect the output quality. (Edit profile --> Encoder mode --> Target file size --> File size --> OK ) If you require any further information, feel free to contact us at support@videosoftdev.com
Hello, just like any other video, creating musical videos begins with importing your media into the program. Drag your files onto the timeline, arrange them, and use cutting tools for precise trimming. Following this, you can initiate the synchronization process between video and audio, and our channel offers various tutorials on this subject. If you lack a video track, consider adding audio abstractions or text to the scene. For synchronizing any on-screen object with the music's rhythm, the "Edit the Beat" tool proves invaluable. In essence, the editor provides a multitude of tools depending on your creative goals. Feel free to contact us at support@videosoftdev.com, and our support team will be more than happy to assist you with any questions or requests.
How do You delete a project in VSCD after You have exported, and want to start a new project? I is not possible for me to find anything about deleting projects. I hope that somebody can help?
Hello, you can close the current project prnt.sc/zySwemqoAPiJ and start a new one using the corresponding option in the start window: prnt.sc/QW4fxE85CaNz If you require any further information, feel free to contact us at support@videosoftdev.com
yes, go to options (upper right corner), in the Options window that will open, go to the General Options tab (on the left side of the window), in the right pane of the window you will have the option to check for updates... it's a combo of options and you can choose how often to check for updates.
Hello, could you please elaborate? The options can be reset in the same window: prnt.sc/fjce7hNftoA6 The workspace can be restored using the panel manager: prnt.sc/-EUgMJJrkX83
@@VSDCFreeVideoEditor while reseting the setting there was problem vsdc recommend me to export the current setting before executing that problem. So,I don't know how to export the setting. so please help me
If you want to save the settings, use the Export button and select the folder to save them to. Then you can use the Import button and the settings will be restored. If not, just reset the settings
yes, go to options (upper right corner), in the Options window that will open, go to the General Options tab (on the left side of the window), in the right pane of the window you will have the option to check for updates... it's a combo of options and you can choose how often to check for updates.
Using a cartoon avatar with green hair as a teacher .... it just looks childish and adds to the reason why vsdc is not taken seriously and still underrated by many. Please bring on a real human as a teacher as you see done with other video editors who are taken seriously.
Well, I'm sure if there's anyone here who isn't taken seriously and doesn't have credit, it's you. VSDC is a video editing software that can be used in a professional context, I even incorporated it into my professional workflow. The choice of representation has nothing to do with the quality of the software or the work that the team does here on the channel, but I see that your intellect is too short to understand this. Everyone feels very good to learn from the figure because it reflects movements of a human. Don't blame your inability to learn on others, this is ugly and demonstrates, among other things, a lack of morals.
And to help you out a little... This is not a cartoon, neither conceptually nor technically speaking... try to learn before you speak, you will see that you will experience less shame in life.
bruh! i wont say much but this software is one of the best ones in the market and those who use it, take it seriously so dont talk gibberish and be real man/woman.
@@coffeelover1456 Please learn to take ego, emotions and hurt feelings out of a discussion and only then reply. I nowhere wrote anything about the quality of the software but your ego automatically filled that already in for you. I am using vsdc professionally my self.
@@seeithappen1 Well, people like you usually I don't answer, I just forget they exist... but I'll give you a chance... I think you wrote it with ego, thinking you know everything, that what you say represents the truth sovereign, who is the owner of reason... so don't talk to me about ego... I only defended what deserves to be defended and with truths... who insulted the product and the people who work was you when you said so much nonsense, but now I see you don't take what you say... I'm not surprised by your attitude, you've already shown that you're just a child... Do the VSDC community a favor and don't use the product, don't show up here again, the community doesn't need people like you... Ahhh child, grow up, grow up and become a real man
![I Replaced ALL my ADOBE APPS with these [free or cheaper] Alternatives!](http://i.ytimg.com/vi/5EfqHg49kMk/mqdefault.jpg)
To download the latest version of VSDC, go to the official editor’s page: bit.ly/3LX0tht
Questions? Suggestions? Feel free to leave them in the comments below or email us at support@videosoftdev.com
How-to page: www.videosoftdev.com/how-to-use-free-video-editor
Can you do a video on how you do a talking head so we can do a tutorial video like you do?
🤔
Thats a good question 😄
Oh I missed you!
And worried too... Hope all is well with you all!
Great tutorial, it's very good for those who are starting to use a software to have at least a basic tutorial to start
And for those who already know, the truth is that sometimes you end up discovering a little thing or another that you missed and didn't know 🤭
the little thing I keep accidentally rediscovering is that the *MINUS* key is extremely important when silencing audio. To silence it, you need to set it -100. But you end up mostly deaf when you forget the minus key and set it to 100 instead (remembering that ZERO is full volume) lol. I just did it again by accident. Every time, I think I've learned my lesson. Then I do it again :P
@@Vexarax Hello Manumelita!!!
I read your message in the other post and I'm glad you found alternatives... but I'll still try to reproduce this scenario you reported and I'll tell you what I got... I entered more to answer your message there in the other post when this one appeared here for me, because I'm going to sleep a little now since I'm awake until this time working.
I loved your testimony in the messages for the idiot (sorry for the term used), it was very well said and it just shows that there are more important things and people with strength and will to overcome what life sometimes imposes on us. Congratulations and much success to you.
As soon as I really have time to experience the scenario with dedication, I'll let you know the result, ok?
@@Vexarax Ahh that really happens, things like that are easy to happen when we're editing, even more so if it's a bigger, more complex edit... Then we sneer, laugh and continue our editing 😂
@@coffeelover1456 no pressure on reproducing the red bar annoyance! But say you get a full episode of a show (Game of Thrones, Witcher etc, like 50 mins) and want to edit 30 seconds of it. You open the Cutter and Splitter tool and set the markers, then you close the tool and delete the segments on either side of the part you want to keep. Then you open Cutter and Splitter again to more precisely trim your 30 seconds frame by frame, and unfortunately the _entire_ episode is retained, so if you skip back too far in your clip you go to an earlier point in the deleted part of your episode (and if you accidentally edit the deleted part, it deletes your clip) 😱 Prior to the update, the parts you delete would remain deleted, making editing your work in the Cutter and Splitter easy and precise. Now it's not only difficult, it's also dangerous because it's easy to accidentally edit the deleted part and lose your edit!! I've just stopped using the Cutter and Splitter entirely, which is sad because it's a great tool - but it's very odd that someone decided it would be beneficial to retain all the deleted material (especially considering it ruins your edit if you accidentally work in the red part which is easy when you're trying to work with a tiny clip within a huge amount of deleted footage). If it affects enough people they may revert it back to how it used to be, fingers crossed! (or maybe there is an advanced editing reason to retain the deleted material?). But other than that I love the program!! Though I am still slightly deaf from turning my audio to 100 instead of MINUS 100 lol oops fail. I did it twice tonight somehow :p It's 4.42am here, I am also going to sleep ^_^
Thank you for all your comments, Coffee Lover.
Regarding discovering little things: we do add little things here and there with each release, so we'll probably need another "Getting started" video in about a year or so, to cover them all.
Helpful video. I currently have 7.1.6 but I like 6.4.2 version better. They changed the way things work for example cutting and splitting a video.
thnx for the basics, learned some minor details that can make my experience better, btw can u guys explain all types of blur and all options available in masking tab, pls!!!🥺
Great suggestion, thank you. We've actually been having a masking tutorial in mind for some time. Care to let us know what you'd like to see in it?
@@VSDCFreeVideoEditor its really great to see that u guys are so active and take your viewers seriously, so thank u all for that and i wanted tutorials on blur effects like u guys always use gaussian blur to blur the whole object or scene but never have talked about box blur or other options, plus there are many other options in masking tab, like source in, destination out, most of the time i just cant find the right way to use them properly so please can u guys explain all these in your next tutorials🥺, i am not a pro at video editing in fact i am a complete newbie thats why i am asking for this so if u guys can then pls make this tutorial🙏
What A Editing Software ( For Little RUclips ) Thanks To VSDC Team Love From India
So I've been using this software for awhile and I have to say the recent update has caused alot of frustration. Cutting and Splitting footage has never been more confusing and unintuitive. I cut a scene from footage and the cut scene still the ENTIRE video itself, which means its hard to keep track of where the specific piece of footage is. If you stretch the footage slightly in either direction you completely lose the scene. Why was this decision made? Cutting and splitting was so easy before this update. Is there anyway at all I can access the previous version of VSDC?
How to start? I own your program and have used it so little as I find that its very easy to get lost just trying to make a video I turn to anther program as I find its easy to get what I need dont in few clicks and it runs my 2000X video speed good.. When doing this in yours I have yet to get it to work.. Its something in your program thats eating up a lot of system. If other video editors can do it smoothly at 720 and yours is so much better, why dose it hang up.. Yes I have gone threw your videos on how to fix it with little luck. What I found is that If I edit the basic video, speed it up and then build it as a MP4 and bring it back in and add all the other stuff it runs much better. This was my work around to the problem of dealing with such speeds.. (amd ryzen 7 5700G 3.80 -16 GB - win 11 pro) .. Over all the program can be very overwhelming to new users who know little about this and has what I would call a steep learning curve. The click her then over here, then this , and that, move this, click that, ok on that box, next, and pow you just got your first name in... you get what Im saying.. As you know your program in and out and understand what it can do I was hopping that you guy would come up with what I would like to call a "LITE version" of your program.. Something to think about.. TY and I will keep plugging away.
I don't know if I understood correctly what you said, so if I say something that doesn't correspond with what you said, please disregard...
Ease of Use: For all the people I introduced to VSDC (and there were many) they all found the program super easy to use, they quickly understood the general functioning and how I always indicate the material on the VSDC website for people to study, quickly they were using more advanced features and tools... some even said that anyone who has used Powerpoint in their life can use VSDC easily;
Equipment: VSDC is among the software that requires less resources to run, being possible to use VSDC in low-end machines... I could see this for some people that I introduced VSDC who don't work professionally with video editing but want to make their videos with quality... Of course, you shouldn't expect miracles because editing and finishing videos requires equipment with a good standard of performance at the very least;
Lite Version: I didn't understand it, I couldn't make the slightest sense so I can't talk about it;
Workflow: I didn't understand the flow you reported in the msg, the problem you faced, I honestly couldn't understand it, but it seems to me something strange in the how-to process and not in VSDC
I hope you can continue using VSDC and investing in your learning... it's an excellent video editing software, it can easily be used within a professional editing workflow.
I hope you have a better experience with VSDC, more and more!
@Lankster Price - I have no editing training at all, and only properly started using comps for editing a couple of years ago (I'm in my 30s) yet I have found VSDC the easiest and simplest to master for what I require :o I have even been able to invent new things I couldn't find tutorials for (like extreme custom art subtitles). I am editing very heavy 1080p footage for hours on end every day, and I do all of this on the free version, on an Acer all-in-one comp I bought in maybe 2016? It's system is so old/low that I am totally unable to upgrade to Windows 11. I tried other programs but couldn't get them to run on my comp. What program are you using that is easier and runs more smoothly because I have never come across one, especially at a comparable price (ie free)!
Now that was a very informative video. Thanx 😊
We're so glad to hear that. Thank you
You have stylish freckles. How to stop a fragment of a video for a moment? Or make a image from its frame?
Hello, please refer to this guide: ruclips.net/user/shortsIZXZ4z_7Czo?feature=share
If you require any further information, feel free to contact us at support@videosoftdev.com
Nice, with it's absurdily low requirements (1 GB RAM, I mean come on, chrome consumes more RAM than this whole video editor) one might think this editor only does basic stuff but it does pack quite the punch! Now there are more advanced alternatives out there, but I don't think an old laptop is gonna appreciate them, so a mid-advanced editor for low end PC's running smoothly seems pretty promising!
Very helpful
I've watched several beginning tutorials...all of them do the same thing...they go through too many of the options without showing the process from beginning to end. That is what I would like to see. When you are starting out, too many 'options' confuse the issue. In the beginning, I don't care how many places I can import a video...I want to see 'one' then show the next step, then the next step, then the finished video
we will be more happy if you guys add more video effects for free version of it...
anyway very helpful software
Thank U for your Efforts 💚
Can you tell me place, how i can make square video (1:1) HD quality. It only 640. What?
Hey, how you guys made this timeline bar 2:36 to 2:38
Hello, there are several ways, we suggest the following:
1. Add a line and set it up in the properties window prnt.sc/6OEHD5NHAram
2. Double-click it to open a new timeline tab and add a rectangle prnt.sc/HAtYrwuVN2_v
3. Adjust its settings in the properties window prnt.sc/3-RhQfWCruDF apply a mask prnt.sc/Pa_D9x_SYtX0
4. Double-click the rectangle and add a movement prnt.sc/4z6T7xvqychN
excellent all video
Hi, My name is Rasthro, I use VSDC Pro Video Editor for my videos and it is an amazing experience editing my videos in a professional video editor like VSDC, Anyways I suggest a feature called "Motion smoothing" where the tool creates new fake motions in a 30fps or 15fps animations to make the motion smooth, It is also known as "Frame Interpolation" I hope you took my idea and you will add it on future updates
Hi, Rasthro! That sounds like a really cool trick. Thanks! We’ll look into that and definitely add your idea to our to-do list.
Wanted to ask about an issue I’ve had with cutting and splitting. I understand how it works, and have been able to get through my videos fine, but whenever I make a split in my video, it takes forever to load and will normally bring the program into not responding. My pc is more than powerful enough, and I have the pro version bought for the extra hardware acceleration. This problem makes editing my videos take much much longer, and was wondering if there were any recommendations on how I could possibly fix this?
Hello. Sometimes a preview window may lag. Lagging is resulted from the fact that the editor is processing all changes made. It doesn’t affect the resulted video
Have you seen this tutorial: ruclips.net/video/JASSFWJHwbw/видео.html&t ?
High quality/high-resolution Project/4K projects:
ruclips.net/video/5d1TXjYMuok/видео.html
hello, I just installed the software, but compared to the workspace of the editor in your videos, my workspace is too tight, it's like the different parts of the workspace are squeezed together, it gives a claustrophobic feeling, even the video preview is really small, my PC resolution is 1080 x 1920, is there any way to make it look for a lack of better word "wider"? Do you need a screenshot of my workspace?
Hello, please consult this tutorial ruclips.net/video/GjZlw-so0QQ/видео.html
Our team generally records tutorials on 4K or 2K screens, which means the workspace might appear slightly different on regular HD monitors. However, there's a simple solution to ensure a consistent experience. You can manually customize your workspace and save this configuration using the convenient "panes manager" feature. This will allow you to tailor the layout to your specific needs and avoid any display inconsistencies: prnt.sc/iZZbVSpY4W8t
@@VSDCFreeVideoEditor thank you so much
Спасибо за отличный перевод на русский. 👍 Классный ролик! 👍😂
Пожалуйста, мы старались
this video was very helpful thank you very much. by the way love using VSDC video editor, VSDC screen recorder and VSDC screen capture ❤
Thank you so much! Glad to hear you found the video helpful. We love you too ❤
thanks for this outstanding tutorial
You're very welcome!
Hi so in version 8.3 i closed the properties window and now i cant get it back does anyone know how i can get it back?
Please try using the panes manager: prnt.sc/o5VWVn5zIKVi
thank you@@VSDCFreeVideoEditor
Nice entry level tutorial, very helpful, thanks.
I have a question, is it possible to add chapters in VSDC?
I am making home videos of my kids and those can be quite long.
I would like the ability to add chapters so I could easily skip to the next chapter with my remote instead of the longer and not as precise fast forward.
I have been looking everywhere for this but can't find the answer, which makes me doubt if it's even possible, which I would think it is as this doesn't seem to be an advance features.
Any help would be appreciated.
Thanks.
Hello, thanks for the feedback.
Unfortunately, this feature is not available in VSDC
@@VSDCFreeVideoEditor Thanks for the reply.
My understanding is that MP4 does support the additions of chapters, yet all the video editing softwares I have looked at don't seem to supports this unless it is to create DVDs or BluRays.
In an age where unfortunately physical media is disappearing and digital media is prominent, I would think this feature would have been made available when creating digital content as it is pretty useful, especially if you are creating long files.
Anyway, just something to think about for your future development.
Thanks again for the reply.
How did you make your self a Pixar type character for your video? and can i do that with my VSDC
Hello, we use iPhone's Animoji
What is best setting exfort for video gaming ? ...
when I finished editing my video, I tried to export it but the results weren't good, the file size was large but the video quality was broken
can you help me please ? ... 🙏
Hello,
To help you resolve the issue, we need more information about the project you’re working on (about the effect you’ve applied/the setup you’re using/the project settings you’ve selected/your video format/etc)
Please email us at support@videosoftdev.com and provide us with a detailed description.
I have to isolate the small clip of a few seconds from a long video. I have isolated the clip using split into parts button and deleted the unwanted regions. But when i start the video, its showing me blank black screen with no sound at the area where i deleted the video part. Can you tell me how to remove that blank area and how to fix this problem using which command?
Hello,
You can simply drag one file next to another on the timeline using your mouse to close any empty spaces.
Additionally, you can use the "Set blocks order" option to rearrange files: prnt.sc/ixLD11h7SdED
If you require any further information, feel free to contact us at support@videosoftdev.com.
Thank You
I was trying to combine a bunch of clips to make a time lapse video. I cannot find a way to apply it to all the clips at once. Is there a way to do it once I convert them to a sprite?
Hello, unfortunately, you cannot change the speed parameter for multiple objects at the same time.
Hi. Just I want to know why the videos after converting. Are so large. They are very big. I mean size of the videos. A video of 1 hour sized 4GB.(videos for RUclips channel). Please answer me.
Hello,
The size of the exported file depends on its bitrate. Please consult our tutorial - ruclips.net/video/yGRXVXRTWz0/видео.html
The program calculates mathematically it in a different way, it doesn’t display the original bitrate of the video that you can find in file’s properties.
The file size cannot be lower than the input one because while conversion VSDC encodes a new file.
If you want to keep good quality, you need to set high bitrate, but the higher bitrate is, the large file you get after export.
Also, you can set up the file size in the Profile settings, but it may potentially affect the output quality. (Edit profile --> Encoder mode --> Target file size --> File size --> OK )
If you require any further information, feel free to contact us at support@videosoftdev.com
How can I get started in editing musical video as beginner.
Hello, just like any other video, creating musical videos begins with importing your media into the program. Drag your files onto the timeline, arrange them, and use cutting tools for precise trimming. Following this, you can initiate the synchronization process between video and audio, and our channel offers various tutorials on this subject. If you lack a video track, consider adding audio abstractions or text to the scene. For synchronizing any on-screen object with the music's rhythm, the "Edit the Beat" tool proves invaluable. In essence, the editor provides a multitude of tools depending on your creative goals. Feel free to contact us at support@videosoftdev.com, and our support team will be more than happy to assist you with any questions or requests.
hey i want to know why ipticcal flow slow mo is not smooth for me help
Hi,
Do you mind elaborating a bit? What exactly are you trying to achieve, and what exactly are you doing?
One question:
Is it possible to make your own transition with motion tracking+masking?
How do You delete a project in VSCD after You have exported, and want to start a new project? I is not possible for me to find anything about deleting projects. I hope that somebody can help?
Hello, you can close the current project prnt.sc/zySwemqoAPiJ and start a new one using the corresponding option in the start window: prnt.sc/QW4fxE85CaNz
If you require any further information, feel free to contact us at support@videosoftdev.com
Can someone indicates me a tutorial teaching how to create video that includes an avatar (like the girl avatar presented here)?
Hello, we use iPhone's Animoji
@@VSDCFreeVideoEditor Thank´s a lot!
is there a way to not get vsdc video to check for updates everyday.
yes, go to options (upper right corner), in the Options window that will open, go to the General Options tab (on the left side of the window), in the right pane of the window you will have the option to check for updates... it's a combo of options and you can choose how often to check for updates.
@@coffeelover1456 thank you
my vsdc, when I press space key vsdc is not working and not responding please help me
Hello, could you please elaborate? Space key not working to start preview?
Hello Sir/mam i am using vsdc but I have a problem In this. When i press enter button to use preview so the software is stop/freez .
I don't see anywhere in your video you showed a step by step process for using green screen.
Have you checked this tutorial: ruclips.net/video/HwFdOrVVusI/видео.html ?
@@VSDCFreeVideoEditor I did check out this video. But I'm looking for the up-to-date version the 7.1. instructions
@@martysusanf the instructions for 7.1 would be identical because we haven't made changes to the Chroma Key tool since then
maximum features are not working. why?
Which features are you referring to?
sir how to reset the setting of vsdc
Hello, could you please elaborate?
The options can be reset in the same window: prnt.sc/fjce7hNftoA6
The workspace can be restored using the panel manager: prnt.sc/-EUgMJJrkX83
@@VSDCFreeVideoEditor while reseting the setting there was problem
vsdc recommend me to export the current setting before executing that problem.
So,I don't know how to export the setting.
so please help me
If you want to save the settings, use the Export button and select the folder to save them to. Then you can use the Import button and the settings will be restored.
If not, just reset the settings
@@VSDCFreeVideoEditor how to reset
i had press reset the default setting
but there is nothing happen
@@VSDCFreeVideoEditor how to export setting
👍👍🎵🎶🎵
nice nice am the e last kid watch dice tutorial
How to make this talking head?
Hello, we use iPhone's Animoji
@@VSDCFreeVideoEditor Thanks
oh dear ...
Can you help to make montage on vsdc of game pubg or free fire
Hi,
Unfortunately, we don't perform montage as a service. But if you have specific questions - ask away.
Перевод?
Здравствуйте,
Субтитры к этому видео доступны на пяти языках, включая русский. Пожалуйста, переключите субтитры в настройках к видео.
@@VSDCFreeVideoEditor 😘
☑‼
yes, go to options (upper right corner), in the Options window that will open, go to the General Options tab (on the left side of the window), in the right pane of the window you will have the option to check for updates... it's a combo of options and you can choose how often to check for updates.
We don't care about the hot keys. Shut up about the hot keys. Give us one simple way to do a task and then move on.
The way face starring at me cant go out of my head 😰
bruh its the same thing
Using a cartoon avatar with green hair as a teacher .... it just looks childish and adds to the reason why vsdc is not taken seriously and still underrated by many. Please bring on a real human as a teacher as you see done with other video editors who are taken seriously.
Well, I'm sure if there's anyone here who isn't taken seriously and doesn't have credit, it's you.
VSDC is a video editing software that can be used in a professional context, I even incorporated it into my professional workflow.
The choice of representation has nothing to do with the quality of the software or the work that the team does here on the channel, but I see that your intellect is too short to understand this.
Everyone feels very good to learn from the figure because it reflects movements of a human.
Don't blame your inability to learn on others, this is ugly and demonstrates, among other things, a lack of morals.
And to help you out a little...
This is not a cartoon, neither conceptually nor technically speaking... try to learn before you speak, you will see that you will experience less shame in life.
bruh! i wont say much but this software is one of the best ones in the market and those who use it, take it seriously so dont talk gibberish and be real man/woman.
@@coffeelover1456 Please learn to take ego, emotions and hurt feelings out of a discussion and only then reply. I nowhere wrote anything about the quality of the software but your ego automatically filled that already in for you. I am using vsdc professionally my self.
@@seeithappen1 Well, people like you usually I don't answer, I just forget they exist... but I'll give you a chance... I think you wrote it with ego, thinking you know everything, that what you say represents the truth sovereign, who is the owner of reason... so don't talk to me about ego... I only defended what deserves to be defended and with truths... who insulted the product and the people who work was you when you said so much nonsense, but now I see you don't take what you say... I'm not surprised by your attitude, you've already shown that you're just a child... Do the VSDC community a favor and don't use the product, don't show up here again, the community doesn't need people like you...
Ahhh child, grow up, grow up and become a real man
Watermark is there or not
Hello! VSDC is completely watermark-free