Thank you for a good instructional video. The paper manual didn't describe the last part of how to lock the drawers in place especially well. You on the other hand, explained it perfectly well.
THANK YOU SO MUCH for the close-up at 0:10-0:17, I couldn't figure out how to insert the back part and thought you just slide it in from the side. Very helpful video.
Anyway you can post a video on how to remove these drawers? Trying to change around this PAX closet a bit and cannot figure out how to even just pull the drawers out. Thanks!!!
He comprado un almario en Ikea pero a la hora de montar los repestibos cajones, me he llevado la sorpresa de que no me venía las instrucciones de dichos cajones. Gracia a su video, he podido ver a donde encajaba cada pieza. Incluida la pestaña de cierre de seguridad en las guías. El único pero del montaje, es que no me viene los embellecedores blancos de las Guías. " Punto negativo para la parte que le corresponde a la empresa IKEA en la sección de embalaje ". Me despido muy agradecido por su VIDEO, que esta muy bien detallado los pasos que hay que seguir. Muchas gracias 👍🏻.
Today I learned: For stacked drawers, from screw-to-screw is 6 holes. IKEA should really note this in their manual. Getting the drawer bottom right-side up is very important. If it's correct, it's easy. If it's upside-down, it feels wrong.
Thanks! Your video explains the confusion from the last part of the instructions from ikea. Because the drawer runners are different then the instruction from ikea.
I had some major issues getting the tabs in the back to properly line up. In the end, the issue was that I tightened the rear screws too much, and it caused the rear of the rail to flex. Once I backed the screws off and tightened them a bit less, it worked fine.
Hi thanks for the video. Noticed you attached rails to drawers initially but in last after attaching rails to frame at 2:57 drawer has no rails to it? so little confused if rails goes in frame or drawer?
Did you install the soft close bracket at the very first hole or did you start at the second hole? How many holes per drawer? Thanks for the informative video.
I just bought and assembled this drawer today, but I don’t have that White piece for the rail. Do they no longer need them or did I get a drawer with a missing piece?
@@k-nemo Great video by the way. I'm glad that they're people like you making these videos to make it easier for people like me. Thank you very much again.
Hello! This would be an absolutely great video if you would consider replacing the very distracting loud banjo music with voice instructions, especially during the insertion of the drawer onto the rail section which is the difficult part. Thank you
If you didn't solve the problem you should return it to Ikea. The hole may be too small or the screws too big. Unfortunately mistakes like this happen often.
Thank you for taking the time to film this!! Very clear and great quality 👌 big thumbs up from me
Thanks for leaving a lovely comment
Thank you for a good instructional video. The paper manual didn't describe the last part of how to lock the drawers in place especially well. You on the other hand, explained it perfectly well.
You're welcome!
Thank you so much ! Couldnt have figured out that one metal bracket without this video
This was SO helpful! I was scratching my head at the instructions for how to insert the drawer once it was built. Thank you!
You're welcome!
Do you take off the attachments off the drawers again?
Not sure why they need to be attached and then taken off again?
@@rnp7184exactly, if this is a demonstrative video, why do that?😢
❤❤❤❤❤ thank you!
THANK YOU SO MUCH for the close-up at 0:10-0:17, I couldn't figure out how to insert the back part and thought you just slide it in from the side. Very helpful video.
You're welcome!!
Brilliant! Thank you!
Excellent job thank you for your time and effort to make this video and share it with us
So nice of you
Danke für das tolle Video, so hat es noch keiner hier bei YT erklärt, vor allem das Händeln mit den Plättchen. 😄😄😇
I really needed this😩😩. Thank you so much!!
Man, you saved me. Wish I would of watched this before installing the drawers. Thing would of been installed much faster
Great instructional video!
I'm glad the video was helpful.
I was missing that very last clamp 😅
Thanks a million! 🎉
Happy to help!
Thank you so much, that last part where I put the rails, the assembly manual left me a bit confused as to how to proceed there.
It's great to hear it helped. Thanks for watching and leaving a comment
Anyway you can post a video on how to remove these drawers? Trying to change around this PAX closet a bit and cannot figure out how to even just pull the drawers out. Thanks!!!
He comprado un almario en Ikea pero a la hora de montar los repestibos cajones, me he llevado la sorpresa de que no me venía las instrucciones de dichos cajones.
Gracia a su video, he podido ver a donde encajaba cada pieza.
Incluida la pestaña de cierre de seguridad en las guías.
El único pero del montaje, es que no me viene los embellecedores blancos de las Guías.
" Punto negativo para la parte que le corresponde a la empresa IKEA en la sección de embalaje ".
Me despido muy agradecido por su VIDEO, que esta muy bien detallado los pasos que hay que seguir.
Muchas gracias 👍🏻.
Me alegro de que mi video haya sido útil. Gracias por mirar y dejar un comentario.
Thank you are the man!
Today I learned:
For stacked drawers, from screw-to-screw is 6 holes. IKEA should really note this in their manual.
Getting the drawer bottom right-side up is very important. If it's correct, it's easy. If it's upside-down, it feels wrong.
Thanks! Your video explains the confusion from the last part of the instructions from ikea. Because the drawer runners are different then the instruction from ikea.
Glad it was helpful!
Thanks helped me disable without breaking anything 😂
thanks a lot :) really helpful
You're welcome!
I had some major issues getting the tabs in the back to properly line up. In the end, the issue was that I tightened the rear screws too much, and it caused the rear of the rail to flex. Once I backed the screws off and tightened them a bit less, it worked fine.
hello there! do u know which dimensions you bought for this wardrobe? I have the same one I think, but I'm not sure which size drawers would fit!
try here:
www.ikea.com/addon-app/storageone/pax/web/latest/?range=pax&uiPlatform=web&locale=en-GB#/planner
Hi thanks for the video. Noticed you attached rails to drawers initially but in last after attaching rails to frame at 2:57 drawer has no rails to it? so little confused if rails goes in frame or drawer?
The rails are attached to the frame. Not in a drawer. I wanted to show the details of how drawers are attached to the rails.
Did you have to buy all the drawers and shelving unit separate? I'm assuming its the pax wardrobe then the komplement drawers?
Yes
Did you install the soft close bracket at the very first hole or did you start at the second hole? How many holes per drawer? Thanks for the informative video.
Second hole, 6 holes per drawer if you're stacking drawers
I just bought and assembled this drawer today, but I don’t have that White piece for the rail. Do they no longer need them or did I get a drawer with a missing piece?
If it is in your manual, ask the store to send it to you.
What is the name of the white piece you used to insert the drawers mine did not have any
I do not know how to call it. It was included.
Awesome
Thank you
I did same thing , except the drawers are 1/16 inch bigger each side ., from the door inches . The drawers are 100x58
Thanks for watching
@@k-nemo
Great video by the way.
I'm glad that they're people like you making these videos to make it easier for people like me.
Thank you very much again.
When slide the base board at an angle then push it forward it makes a sound like it’s ripping apart. Is this normal? 0:07
No. Insert gently. Insert and turn. 0:14
Oh it was that last part with the two holes. I still don’t get what’s the purpose
At 20:11 both sides of the board cracked while trying to snap it in, as a matter of fact it was too short to fit in
Hello! This would be an absolutely great video if you would consider replacing the very distracting loud banjo music with voice instructions, especially during the insertion of the drawer onto the rail section which is the difficult part. Thank you
Hi I’m stuck on 1:00 I can’t get the arrows facing up as it’s very tigjt
If you didn't solve the problem you should return it to Ikea. The hole may be too small or the screws too big. Unfortunately mistakes like this happen often.