Siemens NX Tutorial | Helix, Line, Tube
HTML-код
- Опубликовано: 14 июл 2024
- B1P-34-E | Siemens NX 2007 Tutorial Modeling | In this expert course you will learn more options of the line, moreover it shows the command helix.
The helix or spiral, we encounter in mechanical engineering in various ways: As a spring, as a heating coil, as a thread, but also as a screw conveyor or compressor turbine. Depending on the requirements, the helix must be adapted and the connection geometry created.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | ...
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on RUclips. (and about your subscription ;-) / @learnnx
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Content
00:00:09 Foreword
00:00:33 The helix command
00:01:53 Constant, linear or cubic
00:03:15 Helix along helix
00:05:07 Create course part
00:06:12 Create helix
00:07:07 Create datum planes
00:07:52 Create lines
00:09:53 Create arcs
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on learnnx.com
#learnNX #SiemensNXfreeCourse
So useful!
Could you please provide some tutorials on surface modeling in NX? I've found that there are very few high-quality tutorials on surface modeling available online. Thank you very much.
Thanks for your suggestion, it's now on my list.
wow.very nice, very very hard.