THANKS! Worked on my mini 2 battery, got error until I connected it to 9V battery by vcc and gnd pins. After that read and other actions worked and it was charging after that.
Do you know if it's possible to eventually replace cells in the battery and then use that programming to reprogram the battery to think that it's brand new?
Okay, let me know if you figure it out as I got a Avata 2 and they just use basic HV 2150 Lipo cells but each pack is $129. I have 4 packs so hope they last awhile. @@DrFailov
@@DrFailov I have about 10 brand new M300 batteries that were kept about a year unused. Now they are dead without life and those things are expensive I’ll really love to revive them… please what can I do
Hi good day , i have tried what is in the video, the battery voltage on all 4 cells are below 3.3 v and it would not charge, same mavic 3 battery. Any help would be appreciated
With this board and software can you rewrite battery capacity for a higher capacity cell? And will the drone recognize that it’s a higher capacity cell so it knows when to return home?
@@DrFailov Okay, I saw some 3500mah lipo cells on Aliexpress specifically for the Mini 2. If I desolder the original lipo cells from the bms and solder on the new 3500mah cells on the bms will it work?
@@DrFailov Yes sorry I didn’t mention that, I will obviously need to connect to the bms using cp2112 board after I replaced the cells. Cool tutorial thank you👍🏽
ERROR:could not write block to 0x44 ERROR:could not perform SMBus read 0x00.. that i incounter when i click the read. but its connected to programer chip.
смотрят те кому нужно, вот и не понять тебе.. Аккум у DJI умный, как только просел ниже положенного, так в блокировку становится. На видео процесс разблокировки...
THANKS! Worked on my mini 2 battery, got error until I connected it to 9V battery by vcc and gnd pins. After that read and other actions worked and it was charging after that.
is it regular adapter or LIPO charger ? i havent 16V adapter may i use 12 V for mavic 3 battery ?
Do you know if it's possible to eventually replace cells in the battery and then use that programming to reprogram the battery to think that it's brand new?
@@maxsinventions8913 yes, it's possible, all you have to do is the same, but with replaced cells
@@maxsinventions8913 on new firmwares it will not work: .1100 and older is working
Okay, let me know if you figure it out as I got a Avata 2 and they just use basic HV 2150 Lipo cells but each pack is $129. I have 4 packs so hope they last awhile. @@DrFailov
@@maxsinventions8913 this method works on Mavic 2, mavic 3, air1, air2, mini1, mini2 batteries. But not avata
Good evening, do you have the schematic for DJI Min 2?
@@brunoraw755 battery connection described it "battery Killer" app on "help" button
It worked, thanks
Please give me aplication dji baterai repair😮
Is there new link for the group? I want to thank you and I successfully unlocked the battery.
t.me/+goUDc8gYZl8zNjlk
It’s says it expired link
@@sinke90ns link not expired, maybe you've banned for some reason
Is there way to comeback in group? I think it’s very usseful?
hi how to download last version o dji bat killer?
@@liotech2525 download on Internet or in telegram group
Does it need external power ? In some videos don't connect to power supply
@@rinexco8 it need external power in most of times because locked battery is sleeping
How much min voltage? 16 voltage or less can we use ?@@DrFailov
@@rinexco8 use max charge voltage WITH CURRENT LIMIT, it's optimal
Can this chip read mavic 3 running battery? I just want to reduce battery cycle
@@novoology5073 it will work
Hey sir my battery is charging properly but i am. Not able to turn it on it is charging but i cant turn it on, is there any option to fix it
@@Vaishnav_Upendra__ Maybe button damaged. Try press harder, it may help
which window version you are using for this module ? Thanks .
@@ericbachvn this was windows 10, but any modern version will work
Hi, the unsealed battery is permanet? After we change the cell without unsealed again. Because my battery is cell was bigger and i want to change it.
Hi, clearing PF2 is permanent and battery works as intended until PF2 triggered again by some problem like over discharge or unbalanced cells
@@DrFailov if i change the cell, i need to clear pf2 again? Thanks for your reply.
@@diki578 yes, every time when cell is disconnected from board, battery locks
Thanks for this amazing video. I will like to do the same for M300 batteries
This method is not suitable for M300 batteries, unfortunately
@@DrFailov I have about 10 brand new M300 batteries that were kept about a year unused. Now they are dead without life and those things are expensive I’ll really love to revive them… please what can I do
@@ms_vibe9918 when batteries is unused for long time, then its chemistry is degrading
Hi good day , i have tried what is in the video, the battery voltage on all 4 cells are below 3.3 v and it would not charge, same mavic 3 battery. Any help would be appreciated
Disassemble battery and charge cells to equal state, then you will be able to unlock it
@@DrFailovit unsealed and clicked the clear pf2 tab , it was successful, I got the charge light to blink then it stopped
@@bernardharewood1686 because cells not balanced or discharged
Hello brother please give me dji killer software please
get the role of cp2112 replaced by arduino?
Not with DJI Battery Killer software
Thnks buddy
How about for mavic 2 pro
Works the same way
Battery mavic 3 manufactured 2022 cannot be unsealed. Is there any solution?
Yes, downgrade it
@@DrFailov Can you instruction me downgrade firmware battery mavic 3 ?
With this board and software can you rewrite battery capacity for a higher capacity cell? And will the drone recognize that it’s a higher capacity cell so it knows when to return home?
Yes, it can.
But without changing the cells it will not affect actual flight time
@@DrFailov Okay, I saw some 3500mah lipo cells on Aliexpress specifically for the Mini 2. If I desolder the original lipo cells from the bms and solder on the new 3500mah cells on the bms will it work?
@@Angelokrto No, then you will need to unlock it using instruction in my video
@@DrFailov Yes sorry I didn’t mention that, I will obviously need to connect to the bms using cp2112 board after I replaced the cells.
Cool tutorial thank you👍🏽
Hello friends, I just bought the device and I have this problem: the battery is dead. Can anyone help?
for mavic 3 pro cine
@@SerkanBAYRAKTAR hi, your default option is to issue warranty replacement. It's best option to get battery with good chemistry
@@SerkanBAYRAKTAR if you can't get warranty replacement for some reason, then you can follow this instruction and likely it will help you
Hi ! Nice video and good infos, thank you !
Can you provide a link to download your version of dji battery killer my friend ?
Available in telegram group:
t.me/+goUDc8gYZl8zNjlk
@@DrFailovlink expired
@@Djidroneservice maybe you were banned, link works
@DrFailov @Miniq27 didn't see it there, what's the name?
it works for mini 2 battery?
Yes, on same way but different pinout and voltage
ERROR:could not write block to 0x44
ERROR:could not perform SMBus read 0x00..
that i incounter when i click the read. but its connected to programer chip.
@@Duble_0_seven bms not powered or dead
@@Duble_0_seven Hi, did you manage to solve this? I have the exact same situation and don't know how to solve it
@@kangaroo-nm5nn yes
Where can I download the software?
Yes, you can download it in telegram group
t.me/+goUDc8gYZl8zNjlk
@@DrFailov this link has expired.
@@alermlima means you already banned for some reason
@@DrFailov Banned?
Эир по этой методике, не хочет разблочиться,даже при подключении 12 вольт
@@ОлегТемлянский air1 должен работать
@@DrFailov может,что заряд просел до 9 вольт?и нужно ждать пока все до 3'3 зарядятся?
Спасибо !!!
Как Ваша штука для зарядки называется?
@@ОлегТемлянский блок питання?)
@@DrFailov спасибо,я думал на видео с регулятором,это что-то другое)
@@ОлегТемлянский самодельный бп
@@DrFailov вход на 24 В? Наверное ещё трансформатор нужен к нему? хорошая штука
@@ОлегТемлянский акуму надо 17В. А БПшка от 12В работает на входе
Hi, how can I join the Telegram group? It’s paid?
No, here's it:
t.me/+goUDc8gYZl8zNjlk
But please follow instructions on pinned message
@@DrFailov I already joined but I was banned.
@@alermlima say me your tg name, I'll try to give you second chance 😄 But follow instructions, it's important
@@DrFailov @alermlima. I don't even have time to think. I've already been banned. 😄
Ничего не понятно, но очень интересно
смотрят те кому нужно, вот и не понять тебе.. Аккум у DJI умный, как только просел ниже положенного, так в блокировку становится. На видео процесс разблокировки...
Можно ссылку на программу пожалуйста?
@@ОлегТемлянский можно скачать либо в группе ТГ либо я много ещё где в гугле находил
@@DrFailov в какой группе?
@@ОлегТемлянский t.me/+goUDc8gYZl8zNjlk
Спасибо)
Як з вами зв'язатися
😂 ясен пень так и будет, нужно было зарядить каждый пакет до 4,2
Тут все ок, напряжение подходит. Дальше зарядка справится
Привет! У меня есть и не могу разблокировать
Please
i have i
s erro Key 2a successfuly entered
Write Block 0x44 540000630400
Chip is Sealed = SEC3 = xxxxxx11 - error unseal!